Advanced Materials, Structures and Mechanical Engineering: Proceedings of the international Conference on Advanced Materials, Structures and Mechanical Engineering, Incheon, South Korea, May 29-31, 2015

418 Pages·2016·146.814 MB·English

by  Kaloop, Mosbeh

Editor Advanced Materials, Structures
Kaloop
and Mechanical Engineering
Editor: Mosbeh Kaloop
“very well organized, comprehensive on the topics related to advanced materials and a A
structures” n
d
d
v
At present, advanced materials structures and mechanical properties analyses are a
M
among the core topics in a range of engineering disciplines - from materials sciences
n
to structural, mechanical and aerospace engineering. e
c
c
e
Advanced materials, Structures and Mechanical Engineering provides a thorough h d
understanding of primary and advanced structures and mechanics of advanced a
M
materials in different fields of engineering. This book presents the foundation of n
mechanics and structural theories of advanced materials using understandable ic a
notations. It provides a mix of engineering, which are a natural choice for the information a t
e
that the engineers require. The book places special emphasis on both structural and l
r
mechanical applications and presents materials using these applications whenever it E i
a
is possible. n
l
g s
,
The key assets of the book include comprehensive coverage of both traditional and i
n S
state-of-the-art numerical techniques of response analysis of structures, such as the e t
r
analysis by numerical and analysis through time and frequency domains. The large e u
number of illustrative materials, theory and exercise problems will clarify and enhance r c
i
the reader’s comprehension. n t
u
g
r
Mosbeh Kaloop is Assistant Professor of public works and civil engineering, Mansoura e
University, Egypt and Research Professor of civil and environmental engineering, s

Incheon National University, South Korea.
an informa business
ADVANCED MATERIALS, STRUCTURES AND MECHANICAL ENGINEERING
IICCAAMMSSMMEE--FFMM..iinndddd ii 1122//1188//22001155 77::3311::5500 PPMM
TThhiiss ppaaggee iinntteennttiioonnaallllyy lleefftt bbllaannkk
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS,
STRUCTURES AND MECHANICAL ENGINEERING, INCHEON, SOUTH KOREA, 29–31 MAY,
2015
Advanced Materials, Structures and
Mechanical Engineering
Editor
Mosbeh Kaloop
Department of Civil and Environmental Engineering,
Incheon National University, South Korea
IICCAAMMSSMMEE--FFMM..iinndddd iiiiii 1122//1188//22001155 77::3311::5500 PPMM
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2016 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
Printed and bound in Great Britain by CPI Group (UK) Ltd, Croydon, CR0 4YY
All rights reserved. No part of this publication or the information contained herein may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
by photocopying, recording or otherwise, without written prior permission from the publisher.
Although all care is taken to ensure integrity and the quality of this publication and the information
herein, no responsibility is assumed by the publishers nor the author for any damage to the property or
persons as a result of operation or use of this publication and/or the information contained herein.
Published by: CRC Press/Balkema
P.O. Box 11320, 2301 EH Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
ISBN: 978-1-138-02793-0 (Hbk)
ISBN: 978-1-315-68300-3 (eBook PDF)
IICCAAMMSSMMEE--FFMM..iinndddd iivv 1122//1188//22001155 77::3311::5511 PPMM
Advanced Materials, Structures and Mechanical Engineering – Kaloop (Ed.)
© 2016 Taylor & Francis Group, London, ISBN 978-1-138-02793-0
Table of contents
Preface xi
Soap film Enneper model in structure engineering 1
H.M. Yee & N.A.H. Mohd
Hencky bar-chain model for buckling and vibration of beams with elastically restrained ends 5
H. Zhang, C.M. Wang & N. Challamel
Application of the ball indentation technique to study the tensile properties across the P92
steel weld joint 11
D.R. Barbadikar, A.R. Ballal, D.R. Peshwe, T. Sakthivel & M.D. Mathew
The continuum model considering the drivers’ anticipation effect 17
C.Y. Yu, R.J. Cheng & H.Q. Liu
Fire resistance of fiber reinforced Concrete Filled Box Columns 21
C.W. Tang, H.W. Liao, H.J. Chen & K.C. Jane
Theoretical and experimental comparative study of strains acting on the hub fork
of a cardan joint 27
I. Bondrea & E. Avrigean
Experimental investigation of residual stress in the micro-grinding of maraging steel 35
Z. Ding, B. Li, P. Zou, J. Yang & S.Y. Liang
Flutter analysis of rotating missile’s variable cross-section empennage by differential
quadrature method 41
D. Horak
Influence of polypropylene waste carpet fiber on deformation characteristics of concrete 45
M.H. Hossein, A.S.M. Abdul Awal & A.A.K. Mariyana
Constructions from wood for a power-effective and eco-friendly real estate 51
A.M. Krygina & N.M. Krygina
Study of the numerical calculation model of the sporting rifle 57
C. Xu & G.Q. Liu
Finite element parameterized modeling of projectiles penetrating gelatin and the development
of a simulation system 61
S.S. Liu, C. Xu & A.J. Chen
Dynamic responses of long-span cable-stayed bridges under multi-line railway trains 65
P. Yang, X.T. Si, K.J. Chen & W.H. Guo
Multiple Tuned Mass Dampers for wind–excited tall building 69
Y.M. Kim, K.P. You, S.Y. Paek & B.H. Nam
Influence of laser radiation on structure and properties of steel 75
O.V. Lobankova, I.Y. Zykov, A.G. Melnikov & S.B. Turanov
Comparison of concentration profile prediction for slurry transportation based
on the diffusion theory 79
L.J. Zhao
v
IICCAAMMSSMMEE--FFMM..iinndddd vv 1122//1188//22001155 77::3311::5511 PPMM
CFG compound foundation in high-rise building design and application 83
J.Z. Li, G.X. Fang & Q. Quan
Design and construction of pile tip and pile lateral bored grouting 87
X. Zhou, G.X. Fang, P. Zhang & Y.Q. Leng
An approach for road region detection 93
H. Fang, G.Q. Yang, J. Li, G.T. Shao, C.Y. Zhang & C.G. Fu
A university e-learning system to enhance higher education teaching environments:
A model-based innovative service-oriented clouds intensive evolution approach 97
L. Wang & Z. Wang
Coupled multiscale nonlinear dynamic analyses of Reinforced Concrete Shear Wall buildings 101
I. Cho, S. Yemmaleni & I. Song
Influence of river level fluctuation on the stability of high floodplains bank slope 105
G.L. Tao, B.Z. Tan, J.Y. Fan, J. Ruan & Z.S. Yao
Scour protection of the foundations of Offshore Wind Energy Converters 111
V. Efimova, A. Karelov, A. Nesterov & N. Belyaev
Vector field modeling of seismic soil movement in building footing 115
Z. Tatiana & S. Pavel
The effect of ocean flow on reconstruction accuracy in the test based on the NAH 119
Q.W. He, P. Hu, X.W. Liu & S.C. Ding
Effect of different modification methods on ground motions 125
C.W. Jiang & D.B. Wang
The effects of the effective support length of the stern bearing on ship shafting vibration
transmission paths 131
H.F. Li, Q.C. Yang, S.J. Zhu & X.W. Liu
Development of a water-collecting device for collecting water at a certain depth 137
Y.H. Chen, Y.P. Xu, J.B. Jiang, Z.T. Ni & X.L. Li
An empirical analysis of the influence of international oil price’s fluctuations
on the exchange rate of RMB 141
J. Deng & J.Q. He
LQR control of seismic-excited tall building with ATMD 145
Y.M. Kim, K.P. You, J.Y. You & D.K. Kim
Use of nonconventional liquid fuel in heat power industry 151
A. Lesnykh & K. Tcoy
Economic evaluation of hydroconversion of fatty acid methyl ester into renewable
liquid hydrocarbons 155
A. Kantama, P. Narataruksa, C. Prapainainar & P. Hunpinyo
DEM investigation of stress field in sand during pile penetration 161
S. Liu & J. Wang
The water saturation effects on dynamic tensile strength in red and buff sandstones
studied with Split Hopkinson Pressure Bar (SHPB) 165
E.H. Kim & D.B.M. de Oliveira
Economic potential of diesel-like renewable fuel production from the by-product
of the palm oil refining process 169
A. Kantama, C. Prapainainar, P. Narataruksa & P. Hunpinyo
Study on acoustic similarity in different fluids 175
M. Wang, Q.D. Zhou, Y.F. Wang, G. Ji, J.B. Xie & Z.Y. Xie
Influence of soil temperature conditions on linear construction stability 181
E.E. Kholoden, S.A. Lobanov & O.M. Morina
vi
IICCAAMMSSMMEE--FFMM..iinndddd vvii 1122//1188//22001155 77::3311::5511 PPMM
The effects of KH560 addition on brittle/ductile properties of glass fiber/epoxy
resin composites 185
J.S. Sun & J.G. Wang
In vitro bioactivity evaluation of Co-Cr-Mo (F-75)/HAP composites 189
N.M.S. Adzali, S.B. Jamaludin & M.N. Derman
Formation of nanostructured Ti-Ni-Hf-Cu coatings by high-speed flame spraying
of mechanically activated powders 195
P.O. Rusinov & Zh.M. Blednova
Synthesis of pure zeolite NaP from kaolin and enhancement of crystallization rate
by sodium fluoride 199
J.T. Li, X. Zeng, R.Y. Chen, X.B. Yang & X.T. Luo
Formation of copper oxide nanostructures by solution-phase method
for antibacterial application 203
C.M. Pelicano, J.C. Felizco & M.D. Balela
A method of load extrapolation based on the MCMC and POT 207
S. You, Y.Q. Wu, Y. Li & Y.S. Zhang
A planar four-bar mechanism demonstrator with variable bar length and connecting
rod curve drawing 213
L.N. Gao, H.Y. Tang & C. Yang
Influence of dynamic force on the vibration of the micro-machine tool spindle 217
M. Guo, B. Li, J. Yang & S.Y. Liang
Research of the IEEE802.11a channel coding technology based on Turbo code 223
Z.Y. Sun, L.Y. Liu & Y. Zhang
Stability analysis of single-layer hyperbolic shallow lattice shell with different
grid reinforcements 227
Z.Y. Zhang, H.Y. Wei, X. Zhao & X. Qin
Extending stress linearization procedures for direct method design in pressure
vessel design 231
H.J. Li, X. Huang & H. Yang
Statistical description of fracture pattern from single particle crushing test 235
B. Zhao, J. Wang & H. Zhao
Channel allocation algorithm in multi-hop cellular network based on potential game 239
Z.Y. Sun, Y. Zhang & L.Y. Liu
Electroosmotic flow through a microchannel containing salt-free power-law fluids 243
S.H. Chang
Electrochemical study of Cu nanowire growth in aqueous solution 247
J.C. Felizco & M.D. Balela
Effects of synthesis techniques and initial reagents on compositions and particle morphology
of hydroxyapatite 251
O. Jongprateep & C. Nueangjumnong
Synthesis and characterization of Fe-Sn nanoparticles via the galvanic replacement method 255
E.R. Magdaluyo Jr., A.L. Bachiller & P.J. Nisay
Numerical study of micro-reactor inlet geometry for Fischer-Tropsch Synthesis 259
W. Chaiwang, A. Theampetch, P. Narataruksa & C. Prapainainar
The efficiency of improving the blade finishing treatment 263
M. Yu Kulikov, V.E. Inozemtsev, A.A. Bocharov & N.O. Myo
Study on the hyperbolic sine function creep model 267
H. Chen, H.D. Jiang & H.Y. Chen
vii
IICCAAMMSSMMEE--FFMM..iinndddd vviiii 1122//1188//22001155 77::3311::5511 PPMM
The calculation and decomposition of embodied energy in Sino-Korean trade:
Based on technological heterogeneity 271
X. Zhang & W.R. Huang
Design of software for orthogonal packing problems 277
V.A. Chekanin & A.V. Chekanin
Flow-induced noise analysis of pipes with variable cross-sections 281
W. Zhao, Y.O. Zhang & Z.L. Guo
Study and simulation on impact of wind turbine generators on Low Frequency
Oscillations in power system 287
J.R. Xu, F. Tang, Q. Zhang, T. Zhao & Q.X. Wang
EMD-based event analysis for identifying the influence of the “2008 Financial Crisis”
on silver price 291
L. Chao & S. Yu
Evaluation of metallurgical parameters of Brazilian lump iron ores with three distinct
typologies 295
J.J. Mendes, A.A. Cunha, F.G. da S. Araújo, F.L. von Krüger & R.A. Llobell Sole
The issue of balancing of eccentric-type vibrators 299
I.M. Yefremov, D.V. Lobanov & K.N. Figura
Comparison between the effects of thoracoscopy and open thoracotomy on elderly patients
with lung cancer 303
F.W. Lin, K.P. Cheng, C. Zhang & Y. Zhao
Territory of mining-industrial development as an object of recreation
in the Far East federal region 307
L.T. Krupskaya, V.P. Zvereva, A.V. Leonenko & N.G. Volobueva
Validation of a temperature parameter in the expression for the efficiency of filtering
magnetophoresis 311
A.A. Sandulyak, D.A. Sandulyak, M.V. Shitikova, Y.A. Rossikhin,
A.V. Sandulyak & V.S. Semenov
Multi-focus fusion with a new sharpness parameter for textile testing 317
J.F. Zhou & R.W. Wang
A novel three-dimensional reconstruction algorithms for nonwoven fabrics based
on sequential two-dimensional images 321
L.J. Yu & R.W. Wang
The effect of volume variation of silver nanoparticle solution towards the porosity
and compressive strength of mortar 327
H.S.A. Tina, A. Andreyani & W.S.B. Dwandaru
Design and implementation of reversible DC speed control system with logic
non circulating current 333
L.N. Gao & S.Q. Yi
Effect of the plain-woven fabrics on mechanical properties of composites 337
S. Tanpichai, K. Kaew-in & P. Potiyaraj
Reactively modified poly(butylene succinate) as a compatibilizer for PBS composites 341
V. Tansiri & P. Potiyaraj
Preparation and characterization of Ag–Bi Y Sm O composite cathode 347
1.5 0.3 0.2 3
C.H. Hua & C.C. Chou
Formation of silver nanowires in ethylene glycol for transparent conducting electrodes 351
N. De Guzman & M.D. Balela
Study on the wave-truss composite bridge design 355
Y. Li, C.L. Zhu & X.X. Zha
viii
IICCAAMMSSMMEE--FFMM..iinndddd vviiiiii 1122//1188//22001155 77::3311::5511 PPMM
The transient stability analysis based on WAMS and online admittance
parameter identification 359
H.Z. Zhou, F. Tang, J. Jia & S.L. Ye
Polymer composites with ferrocene derivatives for fire-safe construction 365
A.A. Askadsky, V.A. Ushkov & V.A. Smirnov
Weight optimized main landing gears for UAV under impact loading for evaluation
of explicit dynamics study 371
R.F. Swati, A.A. Khan & L.H. Wen
Analysis of the influence factors of carbon emissions based on the LMDI
approach—taking Jiangsu Province as an example 377
X.Y. Wang & S.Y. Jiang
Impedance characteristics of laboratory scale molten carbonate fuel cell fueled
by ash free coal 383
S.W. Lee, T.K. Kim, Y.J. Kim, C.G. Lee & M. Wołowicz
Purification of plasmid DNA from Escherichia coli lysate using superparamagnetic
nanoparticles modified with amino functional groups 387
X.L. Qiu, Y.P. Guan, K.K. Wang & C. Guo
Nanomodified bitumen composites: Solvation shells and rheology 393
E.V. Korolev, S.S. Inozemtcev & V.A. Smirnov
Effects of the multi-step ausforming process on the microstructure evolution
of nanobainite steel 399
C. Zhi, A. Zhao, J. He, H. Yang & L. Qi
Author index 405
ix
IICCAAMMSSMMEE--FFMM..iinndddd iixx 1122//1188//22001155 77::3311::5511 PPMM