Principles of Transistor Circuits, Ninth Edition

410 Pages·2000·3.12 MB·English

by  S W Amos

Principles of T ransistor Circuits
This Page Intentionally Left Blank
Principles of
Transistor Circuits
Ninth Edition
Introduction to the Design of Amplifiers,
Receivers and Digital Circuits
S. W. Amos,
BSc, CEng, MIEE
M. R. James,
BSc, CEng, MIEE
Newnes
OXFORD AUCKLAND BOSTON JOHANNESBURG MELBOURNE NEW DELHI
Newnes
An imprint of Newnes Butterworth-Heinemann
Linacre House, Jordan Hill, Oxford OX2 8DP
225 Wildwood Avenue, Woburn, MA 01801-2041
A division of Reed Educational and Professional Publishing Ltd
A member of the Reed Elsevier plc group
First published by Iliffe Books Ltd 1959
Second edition 1961
Third edition 1965
Fourth edition 1969
Fifth edition 1975
Sixth edition 1981
Seventh edition 1990
Eighth edition 1994
Ninth edition 2000
© S. W. Amos and M. R. James 2000
All rights reserved. No part of this publication may be reproduced in
any material form (including photocopying or storing in any medium by
electronic means and whether or not transiently or incidentally to some
other use of this publication) without the written permission of the
copyright holder except in accordance with the provisions of the Copyright,
Designs and Patents Act 1988 or under the terms of a licence issued by the
Copyright Licensing Agency Ltd, 90 Tottenham Court Road, London,
England W1P 9HE. Applications for the copyright holder’s written
permission to reproduce any part of this publication should be addressed
to the publishers
British Library Cataloguing in Publication Data
Amos, S. W.
Principles of transistor circuits. – 9th ed.
1. Transistor circuits
2. Electronic circuit design
I. Title
621.3815(cid:2)30422 TK7871.9
ISBN 0 7506 4427 3
Library of Congress Cataloguing in Publication Data
Amos, S. W. (Stanley William)
Principles of transistor circuits/S.W.Amos. – 9th ed.
p. cm.
ISBN 0 7506 4427 3
1. Transistor circuits. I. Title
TK7871.9A45 1994
621.381(cid:2)528–dc20 93–50682
Composition by Genesis Typesetting, Laser Quay, Rochester, Kent
Printed in England by Clays Ltd, St Ives plc
Contents
Preface to the ninth edition vi
1 Semiconductors and junction diodes 1
2 Basic principles of transistors 22
3 Common-base and common-gate amplifiers 53
4 Common-emitter and common-source amplifiers 65
5 Common-collector and common-drain amplifiers
(emitter and source followers) 78
6 Bias and d.c. stabilisation 90
7 Small-signal a.f. amplifiers 112
8 Large-signal a.f. amplifiers 134
9 D.C. and pulse amplifiers 158
10 R.F. and I.F. amplifiers 180
11 Sinusoidal oscillators 205
12 Modulators, demodulators, mixers and receivers 227
13 Pulse generators 255
14 Sawtooth generators 281
15 Digital circuits 293
16 Further applications of transistors and other
semiconductor devices 328
Appendix A The manufacture of transistors and integrated
circuits 369
Appendix B Transistor parameters 381
Appendix C The stability of a transistor tuned amplifier 387
Appendix D Semiconductor letter symbols 390
Index 397
Preface to the ninth edition
This ninth edition was introduced to bring the material up-to-date and to
render all of the diagrams to the same standard. Some of the information
from previous editions has been left out; either because it was obsolete
or because it is not relevant to modern electronics. Most students are
taught discrete component circuit analysis and design with silicon npn
transistors as the main active devices. Although a flexibility of approach
is important (i.e. to be able to use both npn and pnp devices of any
semiconductor type), the redrawn diagrams have been changed to
conform to the npn silicon arrangement so that the learning process does
not involve unfamiliar configurations. Some of the abbreviations have
been modernised, and the gate turn off thyristor introduced along with
optically coupled devices. Much of the section on digital techniques has
been reworked to reflect current practice.
S. W. Amos
M. R. James
This Page Intentionally Left Blank
Chapter 1
Semiconductors and junction
diodes
Introduction
The 1950s marked the beginning of a revolution in electronics. It started
with the invention by William Shockley of the transistor, a minute three-
terminal device which could switch, amplify and oscillate yet needed
only a few microwatts of power; it was also robust and virtually
everlasting. Inevitably the transistor replaced the electron tube (valve) in
all except very high power applications.
The pace of the revolution was accelerated a decade later by the
development of the integrated circuit or i.c. (popularly known as the
silicon chip) in which transistors and other components are manu-
factured and interconnected by the planar process (see Appendix A) to
form amplifiers, signal stores and other functional units on a single
silicon slice. The miniaturisation now possible is such that several
million transistors can be accommodated on an i.c. less than 1cm2.
The applications of i.c.s seem boundless. They feature in activities as
diverse as satellite communication and control of model railways. They
are widely used in audio, video and radio equipment and they made
possible the computers and microprocessors now universally employed
in commerce and industry. Perhaps their most familiar applications are
in digital watches, calculators and toys.
This book describes the properties of the various types of transistor
and shows how they can be used in the design of electronic circuits. The
principles described apply to circuits employing discrete transistors and
those embodied in i.c.s. To explain the properties of transistors it is
useful to begin with an account of the physics of semiconductors
because all transistors, irrespective of type, depend on semiconducting
material for their action.
2 Principles of Transistor Circuits
Mechanism of semiconduction
As the name suggests a semiconducting material is one with a
conductivity lying between that of an insulator and that of a conductor:
that is to say one for which the resistivity lies between, say 1012 (cid:3)-cm
(a value typical of glass) and 10–6(cid:3)-cm (approximately the value for
copper). Typical values for the resistivity of a semiconducting material
lie between 1 and 100(cid:3)-cm.
Such a value of resistivity could, of course, be obtained by mixing a
conductor and an insulator in suitable proportions but the resulting
material would not be a semiconductor. Another essential feature of a
semiconducting material is that its electrical resistance decreases with
increase in temperature over a particular temperature range which is
characteristic of the semiconductor. This behaviour contrasts with that
of elemental metallic conductors for which the resistance increases with
rise in temperature. This is illustrated in Fig. 1.1, which gives curves for
a conductor and a semiconductor. The resistance of the conductor
increases linearly, whereas that of the semiconductor decreases
exponentially, as temperature rises. Over the significant temperature
range the relationship between resistance and temperature for a
semiconductor could be written
R = aebT
t
where R is the resistance at an absolute temperature T, a and b are
t
constants characteristic of the semiconductor material and eis the base
of the natural logarithms, i.e. 2.81828 ... The two curves in Fig. 1.1 are
not to the same vertical scale of resistance.
Fig. 1.1. ResistanceÐtemperature relationship for a conductor and a
semiconductor