Wooden Cube Alarm Clock

68 Pages·2017·0.75 MB·English

h
s
gli
n
Wooden Cube E
Alarm Clock
a
k
s
Bordsklocka träkub med alarmfunktion en
v
Bordklokke med alarm, trekube S
Pöytäkello jossa herätys
Holzwürfel-Tischuhr mit Weckfunktion sk
or
N
mi
o
u
S
7
2
Art.no Model 01 h
44-2516-1 922265 2017 utsc
44-2516-2 922263 Ver. De
22
h
s
gli
Wooden Cube n
E
Alarm Clock
Art.no 44-2516-1 Model 922265
44-2516-2 922263
Please read the entire instruction manual before using
the product and then save it for future reference.
We reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event
of technical problems or other queries, please contact our
Customer Services (see address details on the back).
Safety
• The clock must only be repaired by qualified service
technicians.
• The clock is for indoor use only.
• Do not place the clock where there is a risk of it falling
into water or other liquid.
• Do not place the clock in damp, dusty environments or
where there is an occurrence of strong vibrations.
22 3
h
s
gli
En • Do not expose the clock to extremely high or low
temperatures. Do not expose the clock to direct sunlight.
• Never try to open, change or modify the clock in any way.
• Always remove the batteries if the clock is not to be
used for a long time.
Product description
2 3 4
1
1. Display
2. PM symbol
3. Alarm symbol
4. Temperature symbol
4
h
s
gli
n
E
5
DC 5V
SET UP DOWN
6 7 8 9
5. Outer battery cover
6. [ SET ] Settings
7. [ UP ] Move up in menu, increase a value
8. [ DOWN ] Move down in menu, decrease a value
9. USB port
4 5
h
s
gli
En 10. Compartment
for 3 × AAA/
LR03 batteries
11. Inner battery 10
cover
11
DC 5V
SET UP DOWN
12. CR2032
battery for
time memory
CR2032 12
DC 5V
SET UP DOWN
6
h
s
gli
Operating instructions En
Note: For optimum operation and to preserve battery
charge, the alarm clock should be powered using the USB
cable wherever possible.
Operation using USB cable
Connect the clock to a computer or other USB charging
device using the included USB cable. Note: A compatible
USB charger is not included but can be purchased separately.
Battery operation
1. Remove the outer battery cover (5) by lifting the tab on
the bottom edge. Lift it up and the cover will come away.
2. Insert 3 × AAA/LR03 batteries into the battery
compartment (10), observing the correct polarity
(see the markings inside the battery compartment).
3. Refit the battery cover by first slotting in the two tabs
in the top edge and then pressing down on the bottom
edge.
6 7
h
s
gli
En Setup
Time
1. Press [ SET ] repeatedly until
the time setting is displayed.
2. Hold in [ SET ] for 2 seconds.
- Press [ UP ]/[ DOWN ] to change between 12-hour
and 24-hour clock display.
- If the 12-hour clock format is chosen, the PM
symbol will be displayed in the top left corner of
the display in the afternoon.
3. Press [ SET ] and the hours will begin to flash.
- Press [ UP ]/[ DOWN ] to set the hours.
4. Press [ SET ] and the minutes will begin to flash.
- Press [ UP ]/[ DOWN ] to set the minutes.
5. Press [ SET ] or wait for 15 seconds and the setting
will be saved.
Handy tip: Holding the [ UP ] or [ DOWN ] button down will
change the time quickly.
8
h
s
gli
Date En
1. Press [ SET ] repeatedly until
the date setting is displayed.
2. Hold down [ SET ] for 2 seconds
until the year begins to flash.
- Press [ UP ]/[ DOWN ] to set the year.
3. Press [ SET ] and the month will begin to flash.
- Press [ UP ]/[ DOWN ] to set the month.
4. Press [ SET ] and the day will begin to flash.
- Press [ UP ]/[ DOWN ] to set the day.
5. Press [ SET ] or wait for 15 seconds and the setting
will be saved.
Alarm
1. There is the possibility of setting three different times
for the alarm in the clock memory: A1, A2 and A3.
2. Press [ SET ] the required
number of times until “A1”,
“A2” or “A3” is displayed.
8 9
h
s
gli
En 3. Hold down [ SET ] for 2 seconds and the hours will
begin to flash.
- Press [ UP ]/[ DOWN ] to set the hours.
4. Press [ SET ] and the minutes will begin to flash.
- Press [ UP ]/[ DOWN ] to set the minutes.
5. Press [ SET ] or wait for 15 seconds and the setting
will be saved.
• The alarm is now on and the alarm symbol will show
on the display.
• The alarm clock will emit a ring signal at the set time,
the signal will sound for 1 minute or until any of
the buttons on the back is pressed.
• The clock will sound the alarm at the same time every
day unless the alarm function is switched off.
• The alarm is switched off by pressing [ SET ] the required
number of times until the alarm time in question “A1”,
“A2” or “A3” is displayed.
• Press [ UP ] to toggle between −− (off) and ON (on).
10