Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear 1998: Vol 218 Index

7 Pages·1998·1.5 MB·English

Ml
ELSEVIER
Wear 218 (1998) 261
Author Index of Volume 218
Abdel-Rahman, A.A., 216 Fu, Y., 250 Loh, N.L., 250 Wang, Y., 96
Ahmed, S.M., 119 Funkenbusch, P.D., | Loubet, J.L., 8 Wang, Y.Q., 128
Arnell, R.D., 223 Witke, K., 84
Attia, N.A., 172 Ge, S.R., 232 Mathia, T.G., 8 Wong, H.-C., 237
Austin, L.G., 15 Golini, D., Mittal, S., 21 Woydt, M., 84
Mokhtar, M.O.A., 172
Batchelor, A.W., 25 Hsu, S.M., 96 Moon, B., 210
Beck, R.A., 145 Hu, Y., 78, 244 Munioz-Escalona, P., 103 Xue, Q., 139
Bell, T., 34 Huang, J.Q., 167 Xue, Q.J., 232
Blau, P.J., 66 Huang, L.P., 128 Qiang, Y.H., 232
Saha, P.K., 179 Yang, Z., 159
Jardret, V., 8
Cassier, Z., 103 Sheiretov, T., 54 Yildirim, K., 15
Chen, S., 153 Jiang, J., 223 Skopp, A., 84 Yoon, H., 54
Cheng, Z.M., 167 Jones, P., 96 Sun, Y., 34 Younes, Y.K., 172
Cusano, C., 54 Suzuki, M., 110 ¥a, L., 153
Kato, K., 210, 237
Yuan, Q., 159
Kong, Y., 159
Ding, C.X., 167 Takahashi, T., 1
Tan, S.H., 167
Domiaa ¥ uez, J., 43
Dorfel, I., 84 Li,3 , 128 Terheci, M., 191 Zahouani, H., 8
Li, J.F., 167 Tian, Y., 203 Zanoria, E.S., 66
Liu, C.R., 21 Truss, R.W., 145 Zhang, G., 159
El-Domiaty, A.A., 216 Liu, W., 78, 139, 153, 244 Zhang, Z., 139
EL Mahdy, T.H., 172 Liu, W.L., 128 Umehara, N., 210, Zhou, Y., |
Elsevier Science S.A.

LSEVIER
Wear 218 (1998) 263-266
Subject Index of Volume 218
Abrasive waterjet Chemical structure
maximum depth of cut for ceramics using abrasive waterjet technique, effect of chemical structure of organo-chlorine compounds on the
216 lubricity of Al2024 against steel, 78
Additive Coatings
study on lubricating mechanisms of La(OH), nanocluster modified by evaluation of thermally-sprayed ceramic coatings using a novel ball-
compound containing nitrogen in liquid paraffin, 139 on-inclined plane scratch method, 96
preparation of DDP-coated PbS nanoparticles and investigation of the study on the structure and wear resistance of two-step salt bath nitro-
antiwear ability of the prepared nanoparticles as additive in liquid carburized steel, 232
paraffin, 153 Conformal contacts
Aerostatic bearing a theoretical and experimental study on the dynamics of sliding bodies
static study of the porous bearings by the simplified finite element with dry conformal contacts, 172
analysis, 203 Conjugation
A1-99.999 effect of chemical structure of organo-chlorine compounds on the
investigation of the temperature effects on induced impact pressure lubricity of Al2024 against steel, 78
and cavitation erosion, 119 Contact fatigue
Al,O cyclic variations in friction forces and contact stresses during fretting
evaluation of thermally-sprayed ceramic coatings using a novel ball- fatigue, 43
on-inclined plane scratch method, 96 Corrosion
Alcohols sliding wear characteristics of low temperature plasma nitrided 316
tribological properties of alcohols as lubricating additives for alumi- austenitic stainless steel, 34
num-on-steel contact, 244 Critical cutting speed
Aluminum influence of the critical cutting speed on the surface finish of turned
tribological evaluation of some aluminum-based materials in lubri- steel, 103
cant/refrigerant mixtures, 54
Aluminum alloy
study on fretting wear behavior of laser treated coatings by X-ray DDP-PbS nanoparticles
imaging, 250 preparation of DDP-coated PbS nanoparticles and investigation of the
Aluminum extrusion antiwear ability of the prepared nanoparticles as additive in liquid
thermodynamics and tribology in aluminum extrusion, 179 paraffin, 153
Aluminum-on-steel Diamond-like carbon (DLC) coatings
tribological properties of alcohols as lubricating additives for alumi- the effect of sliding speed on wear of diamond-like carbon coatings,
num-on-steel contact, 244 223
Die bearing surface
Billet thermodynamics and tribology in aluminum extrusion, 179
thermodynamics and tribology in aluminum extrusion, 179 Dry contact
Built-up-edge a theoretical and experimental study on the dynamics of sliding bodies
influence of the critical cutting speed on the surface finish of turned with dry conformal contacts, 172
steel, 103 Dry friction
wear engineering oxides/anti-wear oxides, 84
1C—3Cr steel
microscopic wear mechanisms of Ti ion-implanted 1C-3Cr steel, 210
Cavitation erosion Effect of sliding speed
investigation of the temperature effects on induced impact pressure the effect of sliding speed on wear of diamond-like carbon coatings,
and cavitation erosion, 119 223
Ceramic-maierials cutting Elastic and plastic deformation
maximum depth of cut for ceramics using abrasive waterjet technique, understanding and quantification of elastic and plastic deformation
216 during a scratch test, 8
Ceramics EPMA
wear engineering oxides/anti-wear oxides, 84 study on lubricating mechanisms of La( OH), nanocluster modified by
evaluation of thermally-sprayed ceramic coatings using a novel ball- compound containing nitrogen in liquid paraffin, 139
on-inclined plane scratch method, 96 Erosion mechanism
the effect of surface roughness on friction of ceramics sliding in water, the blast erosion behaviour of ultrahigh molecular weight polyethyl-
237 ene, 128
Elsevier Science S.A.
264 Subject Index of Volume 218 / Wear 218 (1998) 263-266
Erosive pressure In situ observation
investigation of the temperature effects on induced impact pressure study on fretting wear behavior of laser treated coatings by X-ray
and cavitation erosion, 119 imaging, 250
Erosive wear Ion-implantation
the blast erosion behaviour of ultrahigh molecular weight polyethyl- microscopic wear mechanisms of Ti ion-implanted 1C—3Cr steel, 210
ene, 128
Experimental design La(OH), nanocluster
the effect of sliding speed on wear of diamond-like carbon coatings, study on lubricating mechanisms of La(OH), nanocluster modified by
223 compound containing nitrogen in liquid paraffin, 139
Laser alloying
Fatigue study on fretting wear behavior of laser treated coatings by X-ray
cyclic variations in friction forces and contact stresses during fretting imaging, 250
fatigue, 43 Load capacity
investigation of the temperature effects on induced impact pressure static study of the porous bearings by the simplified finite element
and cavitation erosion, 119 analysis, 203
Films Lubricant/refrigerant mixtures
comparison of tribological characteristics of sputtered MoS, films tribological evaluation of some aluminum-based materials in lubri-
coated with different apparatus, 110 cant/refrigerant mixtures, 54
Finite element Lubricious oxides
static study of the porous bearings by the simplified finite element wear engineering oxides/anti-wear oxides, 84
analysis, 203
Fracture mechanics Machining
wear by surface fatigue on a new foundation. Part II. particle detach- effects of machined surface condition on the repeated impact behavior
ment mechanisms and quantitative aspects, 191 of silicon nitride, 66
Fretting fatigue Magnéli-phases
cyclic variations in friction forces and contact stresses during fretting wear engineering oxides/anti-wear oxides, 84
fatigue, 43 Media, ceramic
Fretting wear the abrasive wear of cylindrical grinding media, 15
study on fretting wear behavior of laser treated coatings by X-ray Media, cylindrical
imaging, 250 the abrasive wear of cylindrical grinding media, 15
Friction Microcracking
friction and wear characteristics of mullite, ZTM and TZP ceramics, the blast erosion behaviour of ultrahigh molecular weight polyethyl-
159 ene, 128
a theoretical and experimental study on the dynamics of sliding bodies Microcutting
with dry conformal contacts, 172 the blast erosion behaviour of ultrahigh molecular weight polyethyl-
study on the structure and wear resistance of two-step salt bath nitro- ene, 128
carburized steel, 232 Microploughing
the effect of surface roughness on friction of ceramics sliding in water, the blast erosion behaviour of ultrahigh molecular weight polyethyl-
237 ene, 128
Friction and wear behaviors Microstructure
tribological properties of alcohols as lubricating additives for alumi- study on the structure and wear resistance of two-step salt bath nitro-
num-on-steel contact, 244 carburized steel, 232
Mills, tumbling
Ground surface the abrasive wear of cylindrical grinding media, 15
effects of machined surface condition on the repeated impact behavior Modelling
of silicon nitride, 66 the effect of sliding speed on wear of diamond-like carbon coatings,
223
Mullite
Hardened bearing steel
friction and wear characteristics of mullite, ZTM and TZP ceramics,
a method of modeling residual stresses in superfinish hard turning, 21
159
Hard turning
a method of modeling residual stresses in superfinish hard turning, 21 Nitrides
High temperature
study on the structure and wear resistance of two-step salt bath nitro-
wear engineering oxides/anti-wear oxides, 84 carburized steel, 232
HVOF
Nitrocarburizing
evaluation of thermally-sprayed ceramic coatings using a novel ball-
study on the structure and wear resistance of two-step salt bath nitro-
on-inclined plane scratch method, 96
carburized steel, 232
Hydrodynamic lubrication
Nitrogen
tribological properties of silicon carbide under water-lubricated slid-
comparison of tribological characteristics of sputtered MoS, films
ing, 167
coated with different apparatus, 110
Image analysis Oil additives
wear by surface fatigue on a new foundation. Part II. particle detach- effect of chemical structure of organo-chlorine compounds on the
ment mechanisms and quantitative aspects, 191 lubricity of Al2024 against steel, 78
Impact wear Organo-chlorine
effects of machined surface condition on the repeated impact behavior effect of chemical structure of organo-chlorine compounds on the
of silicon nitride, 66 lubricity of Al2024 against steel, 78
Subject Index of Volume 218 /W ear 218 (1998) 263-266
Plasma nitriding Superfinishing
sliding wear characteristics of low temperature plasma nitrided 316 a method of modeling residual stresses in superfinish hard turning,
austenitic stainless steel, 34 Surface defects
Plasma-sprayed wear by surface fatigue on a new foundation. Part II. particle detach-
evaluation of thermally-sprayed ceramic coatings using a novel ball- ment mechanisms and quantitative aspects, 191
on-inclined plane scratch method, 96 Surface fatigue
Plastic deformation wear by surface fatigue on a new foundation. Part II. particle detach-
the blast erosion behaviour of ultrahigh molecular weight polyethyl- ment mechanisms and quantitative aspects, 191
ene, 128 Surface modification
Polyurethane-urea preparation of DDP-coated PbS nanoparticles and investigation of the
effect of chemical structure on the wear behaviour of polyurethane— antiwear ability of the prepared nanoparticles as additive in liquid
urea elastomers, 145 paraffin, 153
Porous bearing microscopic wear mechanisms of Ti ion-implanted 1C-3Cr steel, 210
static study of the porous bearings by the simplified finite element Surface morphology
analysis, 203 study on the structure and wear resistance of two-step salt bath nitro-
Preston’s coefficient carburized steel, 232
grinding of single crystal sapphire: workpiece roughness correlations, Surface roughness
study on the structure and wear resistance of two-step salt bath nitro-
carburized steel, 232
the effect of surface roughness on friction of ceramics sliding in water,
Residual stress modeling
237
a method of modeling residual stresses in superfinish hard turning, 21
Run-in
the effect of surface roughness on friction of ceramics sliding in water, Temperature
237 investigation of the temperature effects on induced impact pressure
and cavitation erosion, 119
Thermodynamics
Scratch hardness thermodynamics and tribology in aluminum extrusion, 179
understanding and quantification of elastic and plastic deformation Tribochemical oxidation
during a scratch test, 8 tribological properties of silicon carbide under water-lubricated slid-
SEM Tribosystem ing, 167
microscopic wear mechanisms of Ti ion-implanted 1C-—3Cr steel, 210 Tribological properties
SiC study on lubricating mechanisms of La(OH), nanocluster modified by
tribological properties of silicon carbide under water-lubricated slid- compound containing nitrogen in liquid paraffin, 139
ing, 167 tribological properties of silicon carbide under water-lubricated slid-
Silicon nitride ing, 167
effects of machined surface condition on the repeated impact behavior Tribology
of silicon nitride, 66 thermodynamics and tribology in aluminum extrusion, 179
Single crystal sapphire Tribopolymer
grinding of single crystal sapphire: workpiece roughness correlations, effect of chemical structure of organo-chlorine compounds on the
I lubricity of Al2024 against steel, 78
Sliding Tribopolymer XPS and SEM analyses
a theoretical and experimental study on the dynamics of sliding bodies tribological properties of alcohols as lubricating additives for alumi-
with dry conformal contacts, 172 num-on-steel contact, 244
Sliding wear Turned steel
the effect of sliding speed on wear of diamond-like carbon coatings, influence of the critical cutting speed on the surface finish of turned
223 steel, 103
Stainless ¥ZP
sliding wear characteristics of low temperature plasma nitrided 316 friction and wear characteristics of mullite, ZTM and TZP ceramics,
austenitic stainless steel, 34 159
Static study
static study of the porous bearings by the simplified finite element
Unlubricated
analysis, 203
wear engineering oxides/anti-wear oxides, 84
Statistics
wear by surface fatigue on a new foundation. Part II. particle detach-
ment mechanisms and quantitative aspects, 191 Vacuum
Stick-slip comparison of tribological characteristics of sputtered MoS, films
a theoretical and experimental study on the dynamics of sliding bodies coated with different apparatus, 110
with dry conformal contacts, 172
Stress analysis Water
cyclic variations in friction forces and contact stresses during fretting the effect of surface roughness on friction of ceramics sliding in water,
fatigue, 43 237
Stress carrier Waterjet cutting
wear by surface fatigue on a new foundation. Part II. particle detach- maximum depth of cut for ceramics using abrasive waterjet technique,
ment mechanisms and quantitative aspects, 191 216
Structure Waterjet modeling
effect of chemical structure on the wear behaviour of polyurethane— maximum depth of cut for ceramics using abrasive waterjet technique,
urea elastomers, 145 216
266 Subject Index of Volume 218 / Wear 218 (1998) 263-266
Water-lubricated sliding XPS
tribological properties of silicon carbide under water-lubricated slid- study on lubricating mechanisms of La(OH), nanocluster modified by
ing, 167 compound containing nitrogen in liquid paraffin, 139
Wear XPS analysis
sliding wear characteristics of low temperature plasma nitrided 316 preparation of DDP-coated PbS nanoparticles and investigation of the
austenitic stainless steel, 34 antiwear ability of the prepared nanoparticles as additive in liquid
tribological evaluation of some aluminum-based materials in lubri- paraffin, 153
cant/refrigerant mixtures, 54 XPS and IR analyses
effect of chemical structure on the wear behaviour of polyurethane— effect of chemical structure of organo-chlorine compounds on the
urea elastomers, 145 lubricity of Al2024 against steel, 78
friction and wear characteristics of mullite, ZTM and TZP ceramics, X-ray imaging
159 study on fretting wear behavior of laser treated coatings by X-ray
study on the structure and wear resistance of two-step salt bath nitro- imaging, 250
carburized steel, 232
Wear mechanisms
microscopic wear mechanisms of Ti ion-implanted 1C—3Cr steel, 210 ZrO;
study on fretting wear behavior of laser treated coatings by X-ray evaluation of thermally-sprayed ceramic coatings using a novel ball-
imaging, 250 on-inclined plane scratch method, 96
Workpiece roughness ZT
grinding of single crystal sapphire: workpiece roughness correlations, friction and wear characteristics of mullite, ZTM and TZP ceramics,
l 159