Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear 1998: Vol 216 Index

7 Pages·1998·1.5 MB·English

ELSEVIER
Wear 216 (1998) 277
Author Index of Volume 216
Abdel-Aal, H.A., 41 Garagnani, G.L., 229 Martini, C., 229 Sugimura, J., 220
Ando, Y., 115 Geiger, M., 244 Munteanu, V., 251 Szeri, A.Z., 77
Ghosh, M.K., 106 Murakami, T., 213
Borner, H., 150 Gradt, T., 150
Tewari, A., 60
Bryant, M.D., 60 Gudeman, C.S., 70 Nagasawa, H., 179
Thew, M., 184
Nedelcu, P., 251
CCehsacnhgi,n i,C .CL..,, 27279 HHairsraiksaodno,, DT..,, 1|8 4 Pandey, R.K., 106 Umeda, A., 220
Chen, J., 213 Horng, J.H., 8 Pfestorf, M., 244
Cholakov, G.S., 194 Hu, Z.S., 87, 92 Potemkin, M.M., 239 Van De Velde, F., 15, 131, 138
Chun, K., 70 Hiibner, W., 150 Van Peteghem, A.P., 131
Crudu, I., 251 Quinn, T.F.J., 262
Ino, J., 115 Wallaschek, J., 97
Daehn, G.S., 229 Jonescu, M.-P., 251 Rehbein, P., 97 Wang, Q., 35
De Baets, P., 15, 131, 138 lontchev, H.A., 194 Warashina, T., |
Degrieck, J., 138 Sandu, I.-F., 251 Wilkes, A.J., 160
Devenski, P., 194 Kalacska, G., 131 Sawae, Y., 213 Woydt, M., 123
Dong, J.X., 87, 92 Kato, K., 172, 179 Schiffmann, K., 27
Kennedy, A.R., 160 Schneider, T., 150
Xue, Q., 35
Klimenko, S.A., 239 Schouterden, K., 70
Effner, U., 123 Kubo, S., 172 Scieszka, S.F., 202
Engel, U., 244 Shipway, P.H., 160 Yamamoto, Y., 220
Lairson, B.M., 70 Smith, S.T., 41 York, D., 60
Filipowicz, K., 202 Liu, W., 35 Stanulov, K.G., 194
Forder, A., 184 Lyashko, V.A., 239 Strijckmans, K., 131 Zhang, J., 35
Elsevier Science S.A.

Wear 216 (1998) 279-
Subject Index of Volume 216
Acoustic emission (AE) Co-continuous ceramic composite
relationship between friction and wear properties and acoustic friction and wear behavior ofC * Al,O;/Al composites under dry
emission characteristics: iron pin on hardened bearing steel disk, | sliding conditions, 229
AFM Composite
friction and pull-off forces on submicron-size asperities, 115 sliding wear behaviour of aluminium-based metal matrix composites
ALO,/AI produced by a novel liquid route, 160
friction and wear behavior of C* Al,O;/Al composites under dry Condition monitoring
sliding conditions, 229 characterization of wear particles and their relations with sliding
Alumina conditions, 220
friction and wear behaviour of polymer/steel and alumina/alumina Conductivity
under high-frequency fretting conditions, 97 on friction-induced temperatures of rubbing metallic pairs with
Antiwear additive temperature-dependent thermal properties, 41
study on antiwear and reducing friction additive of nanometer titanium Contact recording
oxide, 92 friction and head and disk interface durability in contact recording, 70
Atomic force microscope Contact resistance
microwear experiments on metal-containing amorphous hydrocarbon studies of tribological behavior and separation between surfaces at
hard coatings by AFM: Wear mechanisms and models for the load initial boundary lubrication, 8
and time dependence, 27 Contact strip
effect of arc discharge on wear rate of Cu-impregnated carbon strip in
unlubricated sliding against Cu trolley under electric current, 172
Blast furnace
wear mechanism of copper alloy wire sliding against iron-base strip
a tribosystemic approach to refractory lining destruction in blast
under electric current, 179
furnaces, 251
Control chokes
Boundary lubrication
a numerical investigation of solid particle erosion experienced within
studies of tribological behavior and separation between surfaces at
oilfield control valves, 184
initial boundary lubrication, 8
Copper
Brickwork
effect of arc discharge on wear rate of Cu-impregnated carbon strip in
a tribosystemic approach to refractory lining destruction in blast
unlubricated sliding against Cu trolley under electric current, 17
furnaces, 251
Copper alloy
Brittle fracture
wear mechanism of copper alloy wire sliding against iron-base strip
an integrated testing method for cermet abrasion resistance and
under electric current, 179
fracture toughness evaluation, 202
Counterface wear
sliding wear behaviour of aluminium-based metal matrix composites
Carbon brushes produced by a novel liquid route, 160
effects of micro (rocking) vibrations and surface waviness on wear Cryogenic engineering
and wear debris, 60 tribological behaviour of materials at cryogenic temperatures, 150
Carbon material Cryotribometer
effect of arc discharge on wear rate of Cu-impregnated carbon strip in tribological behaviour of materials at cryogenic temperatures, 150
unlubricated sliding against Cu trolley under electric current, 172
Centre-pivoted pads
the friction force during stick—slip with velocity reversal, 138 Deisel engine
Ceramics oxidational wear modelling. Part III. The effects of speed and elevated
importance of machining on tribology of lubricated slip—rolling temperatures, 262
contacts of Si,N,, SiC, Si;N,-TiN and ZrO,, 123 Destruction
Cermets a tribosystemic approach to refractory lining destruction in blast
an integrated testing method for cermet abrasion resistance and furnaces, 251
fracture toughness evaluation, 202 Dry sliding
CFD friction and wear behavior of C* Al,O,/Al composites under dry
a numerical investigation of solid particle erosion experienced within sliding conditions, 229
oilfield control valves, 184 3D surface parameters
Coatings three-dimensional characterization of surfaces for sheet metal forming,
tribological behaviour of materials at cryogenic temperatures, 150 244
Elsevier Science S.A.
280 Subject Index of Volume 216 / Wear 216 (1998) 279-282
tlastohydrodynamic lubrication Kirchoff transformation
a thermal analysis of traction in elastohydrodynamic rolling/sliding on friction-induced temperatures of rubbing metallic pairs with
line contacts, 106 temperature-dependent thermal properties, 41
Electric railways
effect of arc discharge on wear rate of Cu-impregnated carbon strip in
Lambda ratio
unlubricated sliding against Cu trolley under electric current, 172
studies of tribological behavior and separation between surfaces at
wear mechanism of copper alloy wire sliding against iron-base strip
initial boundary lubrication, 8
under electric current, 179 egendre polynomial
a thermal analysis of traction in elastohydrodynamic rolling/sliding
Focused ion beam line contacts, 106
friction and pull-off forces on submicron-size asperities, 115 Lobatto points
Four ball machine a thermal analysis of traction in elastohydrodynamic rolling/sliding
quantitative estimation and prediction of tribological performance of line contacts, 106
pure additive compounds through computer modelling, 194 Aubricant additives
Fracture toughness quantitative estimation and prediction of tribological performance of
an integrated testing method for cermet abrasion resistance and pure additive compounds through computer modelling, 194
fracture toughness evaluation, 202 Aubricated condition
Fretting relationship between friction and wear properties and acoustic
experimental study by means of thin layer activation of the humidity emission characteristics: iron pin on hardened bearing steel disk, |
influence on the fretting wear of steel surfaces, 13 Jubricated wear
Friction characterization of wear particles and their relations with sliding
a new approach of stick—slip based on quasi-harmonic tangential conditions, 220
oscillations, 15 Lubricating oil
importance of machining on tribology of lubricated slip—rolling study on antiwear and reducing friction additive of nanometer titanium
contacts of Si,Ny, SiC, Si,;N,-TiN and ZrO,, 123 oxide, 92
the friction force during stick—slip with velocity reversal, 138 Lubrication
tribological behaviour of materials at cryogenic temperatures, 150 a new approach of stick—-slip based on quasi-harmonic tangential
effect of synovia constituents on friction and wear of ultra-high oscillations, 15
molecular weight polyethylene sliding against prosthetic joint
materials, 213
Machining
Friction and wear behaviors
importance of machining on tribology of lubricated slip—rolling
investigation of the friction and wear behaviors of Cu(1) and Cu(II)
contacts of Si,N4, SiC, Si;N,-TiN and ZrO,, 123
dioctyldithiophosphates as additives in liquid paraffin, 35
Macrowear
Friction and wear characteristics
microwear experiments on metal-containing amorphous hydrocarbon
friction and wear behaviour of polymer/steel and alumina/alumina
hard coatings by AFM: Wear mechanisms and models for the load
under high-frequency fretting conditions, 97
and time dependence, 27
Friction coefficient
Material durability
relationship between friction and wear properties and acoustic
comparative durability of materials in wear, 239
emission characteristics: iron pin on hardened bearing steel disk, |
Microwear
Friction force
microwear experiments on metal-containing amorphous hydrocarbon
friction and pull-off forces on submicron-size asperities, 115
hard coatings by AFM: Wear mechanisms and models for the load
and time dependence, 27
Grinding Mining tools
a thermal analysis of grinding, 77 an integrated testing method for cermet abrasion resistance and
fracture toughness evaluation, 202
Mixed lubrication
Harmonic oscillations
studies of tribological behavior and separation between surfaces at
a new approach of stick—slip based on quasi-harmonic tangential
initial boundary lubrication, 8
oscillations, 15
MMC
High-frequency tribometer
sliding wear behaviour of aluminium-based metal matrix composites
friction and wear behaviour of polymer/steel and alumina/alumina
produced by a novel liquid route, 160
under high-frequency fretting conditions, 97
Molecular design
Humidity
quantitative estimation and prediction of tribological performance of
experimental study by means of thin layer activation of the humidity
pure additive compounds through computer modelling, 194
influence on the fretting wear of steel surfaces, 131
Morphology
Hydrocarbon hard coating
characterization of wear particles and their relations with sliding
microwear experiments on metal-containing amorphous hydrocarbon
conditions, 220
hard coatings by AFM: Wear mechanisms and models for the load
and time dependence, 27
Nanometer particle
study on antiwear and reducing friction additive of nanometer titanium
Instability
borate, 87
a new approach of stick—slip based on quasi-harmonic tangential
study on antiwear and reducing friction additive of nanometer titanium
oscillations, 15
oxide, 92
Neural network
JKR theory characterization of wear particles and their relations with sliding
friction and pull-off forces on submicron-size asperities, 115 conditions, 220
Subject Index of Volume 216 / Wear 216 (1998) 279-282
Nitrogenated carbon Stick-slip
friction and head and disk interface durability in contact recording, 70 a new approach of stick—slip based on quasi-harmonic tangential
oscillations, 15
Oil additive Stick-slip
investigation of the friction and wear behaviors of Cu(1) and Cu(II) the friction force during stick—slip with velocity reversal, 138
dioctyldithiophosphates as additives in liquid paraffin, 35 Supercritical dry
Oleic acid study on antiwear and reducing friction additive of nanometer titanium
relationship between friction and wear properties and acoustic oxide, 92
emission characteristics: iron pin on hardened bearing steel disk, | Surface roughness
Organic copper salts relationship between friction and wear properties and acoustic
investigation of the friction and wear behaviors of Cu(1) and Cu(II) emission characteristics: iron pin on hardened bearing steel disk, |
dioctyldithiophosphates as additives in liquid paraffin, 35 Surface texture
Organic sulphides characterization of wear particles and their relations with sliding
quantitative estimation and prediction of tribological performance of conditions, 220
pure additive compounds through computer modelling, 194 Surface waviness
Oxidational wear modelling effects of micro (rocking) vibrations and surface waviness on wear
oxidational wear modelling . Part III. The effects of speed and elevated and wear debris, 60
temperatures, 262 Synovia constituents
effect of synovia constituents on friction and wear of ultra-high
Pin-on-disk test molecular weight polyethylene sliding against prosthetic joint
effect of synovia constituents on friction and wear of ultra-high materials, 213
molecular weight polyethylene sliding against prosthetic joint
materials, | 13
Polymer/steel Temperature
friction and wear behaviour of polymer/steel and alumina/alumina on friction-induced temperatures of rubbing metallic pairs with
under high-frequency fretting conditions, 97 temperature-dependent thermal properties, 41
Polymers Temperature rise
tribological behaviour of materials at cryogenic temperatures, 150 a thermal analysis of traction in elastohydrodynamic rolling/sliding
Pull-off force line contacts, 106
friction and pull-off forces on submicron-size asperities, 115 Thermal analysis
a thermal analysis of grinding
Quantitative structure—property relationships Thermal loading parameter
quantitative estimation and prediction of tribological performance of a thermal analysis of traction in elastohydrodynamic rolling/sliding
pure additive compounds through computer modelling, 194 line contacts, 106
Thin layer activation
experimental study by means of thin layer activation of the humidity
Radius of curvature
influence on the fretting wear of steel surfaces, !1 31
friction and pull-off forces on submicron-size asperities, 115
TiC
sliding wear behaviour of aluminium-based metal matrix composites
Scanning force microscopy
produced by a novel liquid route, 160
friction and head and disk interface durability in contact recording, 70 Titanium Borate
Sclerometer beam oscillation
study on antiwear and reducing friction additive of nanometer titanium
comparative durability of materials in wear, 239
borate, 87
Separation
Titanium oxide
studies of tribological behavior and separation between surfaces at
study on antiwear and reducing friction additive of nanometer titanium
initial boundary lubrication, 8
oxide, 92
Sheet metal forming
Topographical analysis
three-dimensional characterization of surfaces for sheet metal forming,
relationship between friction and wear properties and acoustic
244
emission characteristics: iron pin on hardened bearing steel disk, |
Sintered alloy
Tribology
wear mechanism of copper alloy wire sliding against iron-base strip
study on antiwear and reducing friction additive of nanometer titanium
under electric current, 179
borate, 87
Sliding traction coefficient
study on antiwear and reducing friction additive of nanometer titanium
a thermal analysis of traction in elastohydrodynamic rolling/sliding
line contacts, 106 oxide, 92
Sliding wear three-dimensional characterization of surfaces for sheet metal forming,
sliding wear behaviour of aluminium-based metal matrix composites 244
produced by a novel liquid route, 160 Tribosystem
Slip—rolling test a tribosystemic approach to refractory lining destruction in blast
importance of machining on tribology of lubricated slip—rolling furnaces, 251
contacts of Si;N,, SiC, Si;N,-TiN and ZrO,, 123 oxidational wear modelling. Part III. The effects of speed and elevated
Solid particle erosion temperatures, 262
a numerical investigation of solid particle erosion experienced within Trolley wire
oilfield control valves, 184 effect of arc discharge on wear rate of Cu-impregnated carbon strip in
Steel unlubricated sliding against Cu trolley under electric current, 172
experimental study by means of thin layer activation of the humidity wear mechanism of copper alloy wire sliding against iron-base strip
influence on the fretting wear of steel surfaces, 131 under electric current, 179
282 Subject Index of Volume 216 / Wear 216 (1998) 279-282
Tungsten carbide Wear
an integrated testing method for cermet abrasion resistance and effects of micro (rocking) vibrations and surface waviness on wear
fracture toughness evaluation, 202 and wear debris, 60
importance of machining on tribology of lubricated slip—rolling
contacts of Si;N,, SiC, Si;N,-TiN and ZrO,, 123
Ultrahigh molecular weight polyethylene experimental study by means of thin layer activation of the humidity
effect of synovia constituents on friction and wear of ultra-high influence on the fretting wear of steel surfaces, 131
molecular weight polyethylene sliding against prosthetic joint tribological behaviour of materials at cryogenic temperatures, 150
materials, 213 effect of arc discharge on wear rate of Cu-impregnated carbon strip in
Unadditivated paraffinic oil unlubricated sliding against Cu trolley under electric current, 172
importance of machining on tribology of lubricated slip—rolling wear mechanism of copper alloy wire sliding against iron-base strip
contacts of Si;Ny, SiC, Si;N,-TiN and ZrO,, 123 under electric current, 179
an integrated testing method for cermet abrasion resistance and
fracture toughness evaluation, 202
Velocity reversal effect of synovia constituents on friction and wear of ultra-high
the friction force during stick—slip with velocity reversal, 138 molecular weight polyethylene sliding against prosthetic joint
Vibrations materials, 213
effects of micro (rocking) vibrations and surface waviness on wear comparative durability of materials in wear, 239
and wear debris, 60 a tribosystemic approach to refractory lining destruction in blast
Volume-averaging techniques furnaces, 251
a thermal analysis of grinding, 77 Wear particle
characterization of wear particles and their relations with sliding
conditions, 220
Water Wear rate
importance of machining on tribology of lubricated slip—rolling relationship between friction and wear properties and acoustic
contacts of Si;N,, SiC, Si,N,-TiN and ZrO,, 123 emission characteristics: iron pin on hardened bearing steel disk, 1
F <