Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear 1997: Vol 213 Index

5 Pages·1997·0.73 MB·English

A J N
IER Wear 213 (19972)0 5
Author Index of Volume 213
Andersson, S., 117 Igeland, A., 90 Modi, O.P.. 41 Vicek, J., 80
Ilias, H., 90 Myhra, S., 72
Bermejo, J., | Ishii, H., 21
Wang, M., 135
Blanco, C., | Iwabuchi, A., 175 Pan, S.C., 135
Wang, Q.-H., 54
Papini, M., 185
Chen, R., !75 Prasad, B.K., 41 Watson, G.S., 72
Cho, Y.T., 21 Jha, A.K., 41 Wei, C.S., 165
Jiang, M., 59 Weiner, A.M., 200
Qi, A., 159
Dai, Z.D., 135 Wu, C.T., 165
Das, S., 41 Kamath, R., 33 Rusnak, K., 80
Dasgupta, R., 41 Knowles, G., 148 Xue, Q., 29
Diao, D., 21 Ko, P.L., 148 Sanni, S.A., 98 Xue, Q.-J., 54, 135
Dizdar, S., 117 Komanduri, R., 59 Satish, B.M., 33
Sharma, S.C., 33
E,3.,.123 Shimizu, T., 175 Yan, P., 131
Elsharkawy, A.A., 47 Leu, Z.L., 165 Shin, H.S., 175 Yang, J.Q., 131
Liu, F., 131 Yang, S.R., 135
Spelt, J.K., 185
Liu, W., 29 Yao, S.H., 165
Gawne, D.T., 123 Stephenson, D.J., 103
Gibson, C.T., 72 Lu, G., 131 Su, Y.L., 165 Ye, W., 131
Girish, B.M., 33 Sun, J.S., 131 Yegneswaran, A.H., 4!
Grigoroudis, K., 103 Marsh, H., | Sun, X.B., 131 Yinsheng, Z., 159
Yongxin, Q., 159
Martinu, L., 80
Yu, S.Y., 21
Hajek, V., 80 Matsunuma, S., 112 Taponat, M.-C., 148
Harris, S.J., 200 Médevielle, A., 13 Thévenot, F., 13
Hawthorne, H.M., 80 Menendez, R.. | Tohgo, K., 21 Zhang, X.S., 135
Holgerson, M., 140 Mifune, H., 175 Tréheux, D., 13 Zhang, Z., 29
Elsevier Science S.A.

ELSEVIER
Wear 213 (1997) 207-209
Subject Index of Volume 213
Abrasion Composites
slurry erosive wear characteristics of a hard faced steel: effect of effect of SiC particle reinforcement on the unlubricated sliding wear
experimental parameters, 41 behaviour of ZA-27 alloy composites, 33
modelling low stress abrasive wear, 103 Critical load
a simple method for monitoring the hardness of thin amorphous temperature dependence of sliding wear behavior in SiC whisker or
carbon-containing coatings, 200 SiC particulate reinforced 6061 aluminum alloy composite, 21
Aluminium matrix composites CrN coating
temperature dependence of sliding wear behavior in SiC whisker or comparison of tribological behavior of three films—TiN, TiCN and
SiC particulate reinforced 6061 aluminum alloy composite, 21 CrN—grown by physical vapor deposition, 165
ATR spectroscopy
the initial step of tribochemical reactions of perfluoropolyether on Delamination
amorphous carbon, 112 friction characteristics and the wear process of metal pairs in sliding
contacts—with applications to modelling wear of power plant com-
ponents, 148
Ball bearings organic coating removal by particle impact, 185
application of Taguchi method for optimization of finishing conditions Dielectrical materials
in magnetic float polishing (MFP), 59 wear resistance of zirconias. Dielectrical approach, 13
Bail-on-disk Disc brakes
a simple method for monitoring the hardness of thin amorphous chemical and physical properties of carbon as related to brake perform-
carbon-containing coatings, 200 ance, |
Blast cleaning
organic coating removal by particle impact, 185 Energy relaxation
Boundary lubrication wear resistance of zirconias. Dielectrical approach, 13
influence of pre-formed boundary layers on wear transition in sliding Energy storage
lubricated contacts, 117 wear resistance of zirconias. Dielectrical approach, 13
Bubbly oil Engagement
study on the viscosity properties of bubbly oil and the static character- apparatus for measurement of engagement characteristics of a wet
istics of journal bearing lubricated with bubbly oil, 159 clutch, 140
2-ethyl hexoic acid (EHA) surface-modified TiO, nanoparticle
friction and wear properties of a surface-modified TiO, nanoparticle as
C/C composites an additive in liquid paraffin, 29
chemical and physical properties of carbon as related to brake perform-
ance, | Filled polyetheretherketone (PEEK) composite
Calibration wear mechanisms of polyetheretherketone composites filled with vari-
lateral force microscopy — a quantitative approach, 72 ous kinds of SiC, 54
Carbon fibres Finishing
chemical and physical properties of carbon as related to brake perform- application of Taguchi method for optimization of finishing conditions
ance, | in magnetic float polishing (MFP), 59
Carbon gasification Finite difference methods
chemical and physical properties of carbon as related to brake perform- magnetic head-rigid disk interface hydrodynamically lubricated with a
ance, | power-law fluid, 47
Carbon nitride films Fretting wear
tribological study of CN, films prepared by reactive d.c. magnetron improving the fretting wear resistance of titanium alloy by laser beam
sputtering, 80 quenching, 135
Chemo-mechanical polishing Friction
application of Taguchi method for optimization of finishing conditions chemical and physical properties of carbon as related to brake perform-
in magnetic float polishing (MFP), 59 ance, |
Coatings wear resistance of zirconias. Dielectrical approach, 13
organic coating removal by particle impact, 185 lateral force microscopy — a quantitative approach, 72
a simple method for monitoring the hardness of thin amorphous tribological study of CN, films prepared by reactive d.c. magnetron
carbon-containing coatings, 200 sputtering, 80
Collisions influence of pre-formed boundary layers on wear transition in sliding
organic coating removal by particle impact, 185 lubricated contacts, 117
Elsevier Science S.A.
208 Subject Index of Volume 213 / Wear 213 (1997) 207-209
apparatus for measurement of engagement characteristics of a wet Paint removal
clutch, 140 organic coating removal by particle impact, 185
friction characteristics and the wear process of metal pairs in sliding Particle flux
contacts—with applications to modelling wear of power plant com- modelling low stress abrasive wear, 103
ponents, 148 Particle reinforced MMCs
Friction and wear behaviours the sliding wear resistance behavior of NiAl and SiC particles rein-
friction and wear properties of a surface-modified TiO, nanoparticle as forced aluminum alloy matrix composites, 175
an additive in liquid paraffin, 29 Perfluoropolyether
Friction coefficient the initial step of tribochemical reactions of perfluoropolyether on
temperature dependence of sliding wear behavior in SiC whisker or amorphous carbon, 112
SiC particulate reinforced 6061 aluminum alloy composite, 21 Polishing
application of Taguchi method for optimization of finishing conditions
Hardness in magnetic float polishing (MFP), 59
effect of SiC particle reinforcement on the unlubricated sliding wear Pre-formed boundary iayers
behaviour of ZA-27 alloy composites, 33 influence of pre-formed boundary layers on wear transition in sliding
a simple method for monitoring the hardness of thin amorphous lubricated contacts, 117
carbon-containing coatings, 200 Profile development
Hydrodynamic lubrication rail head corrugation growth predictions based on non-linear high
magnetic head-rigid disk interface hydrodynamically lubricated with a frequency vehicle/track interaction, 90
power-law fluid, 47
Quasi-steady
Impact unsteady squeeze film between rectangular plates, 98
organic coating removal by particle impact, 185
lon implantation Rail head corrugation
tribological properties of nitrogen ion implanted WC-—Co, 131 rail head corrugation growth predictions based on non-linear high
frequency vehicle/track interaction, 90
Journal bearing Rail head wear
study on the viscosity properties of bubbly oil and the static character- rail head corrugation growth predictions based on non-linear high
istics of journal bearing lubricated with bubbly oil, 159 frequency vehicle/track interaction, 90
Reynolds number
Laser beam quenching unsteady squeeze film between rectangular plates, 98
improving the fretting wear resistance of titanium alloy by laser beam R.f. bias voltage
quenching, 135 tribological study of CN, films prepared by reactive d.c. magnetron
Lateral force microscopy sputtering, 80
lateral force microscopy — a quantitative approach, 72
Load capacity Sand content
unsteady squeeze film between rectangular plates, 98 slurry erosive wear characteristics of a hard faced steel: effect of
experimental parameters, 41
Magnetic float polishing (MFP) Scanned probe microscopy
application of Taguchi method for optimization of finishing conditions lateral force microscopy — a quantitative approach, 72
in magnetic float polishing (MFP), 59 Seizure
Magnetron sputtering influence of pre-formed boundary layers on wear transition in sliding
tribological study of CN, films prepared by reactive d.c. magnetron lubricated contacts, 117
sputtering, 80 SiC particles
Metal matrix composites effect of SiC particle reinforcement on the unlubricated sliding wear
the sliding wear resistance behavior of NiAl and SiC particles rein- behaviour of ZA-27 alloy composites, 33
forced aluminum alloy matrix composites, 175 the sliding wear resistance behavior of NiAl and SiC particles rein-
Morphology forced aluminum alloy matrix composites, 175
wear mechanisms of polyetheretherketone composites filled with vari- Silicon carbide
ous kinds of SiC, 54 wear mechanisms of polyetheretherketone composites filled with vari-
ous kinds of SiC, 54
NiAI particle Silicon nitride
the sliding wear resistance behavior of NiAl and SiC particles rein- application of Taguchi method for optimization of finishing conditions
forced aluminum alloy matrix composites, 175 in magnetic float polishing (MFP), 59
Ni-Cr-Mo steel Sliding lubricated contact
surface failure mechanisms of Ni-Cr—Mo steel under lubricated slid- influence of pre-formed boundary layers on wear transition in sliding
ing, 123 lubricated contacts, 117
Non-linear rolling contact mechanics Sliding wear
rail head corrugation growth predictions based on non-linear high temperature dependence of sliding wear behavior in SiC whisker or
frequency vehicle/track interaction, 90 SiC particulate reinforced 6061 aluminum alloy composite, 21
Non-Newtonian fluids tribological study of CN, films prepared by reactive d.c. magnetron
magnetic head-rigid disk interface hydrodynamically lubricated with a sputtering, 80
power-law fluid, 47 friction characteristics and the wear process of metal pairs in sliding
contacts—with applications to modelling wear of power plant com-
Oil additive ponents, 148
friction and wear properties of a surface-modified TiO, nanoparticle as the sliding wear resistance behavior of NiAl and SiC particles rein-
an additive in liquid paraffin, 29 forced aluminum alloy matrix composites, 175
Subject Index of Volume 213 / Wear 213 (1997) 207-209
Sliding wear behaviour Vehicle/track interaction
surface failure mechanisms of Ni-Cr—Mo steel under lubricated slid- rail head corrugation growth predictions based on non-linear high
ing, 123 frequency vehicle/track interaction, 90
Slurry erosion Velocity
slurry erosive wear characteristics of a hard faced steel: effect of unsteady squeeze film between rectangular plates, 98
experimental parameters, 41 Viscosity
Speed of rotation study on the viscosity properties of bubbly oil and the static character-
slurry erosive wear characteristics of a hard faced steel: effect of istics of journal bearing lubricated with bubbly oil, 159
experimental parameters, 41
Squeeze film WC-Co
unsteady squeeze film between rectangular plates, 98 tribological properties of nitrogen ion implanted WC-Co, 131
Static characteristic Wear
study on the viscosity properties of bubbly oil and the static character- chemical and physical properties of carbon as related to brake perform-
istics of journal bearing lubricated with bubbly oil, 159 ance, |
Surface failure mechanisms wear resistance of zirconias. Dielectrical approach, 13
surface failure mechanisms of Ni-Cr—Mo steel under lubricated slid- modelling low stress abrasive wear, 103
ing, 123 Wear morphology
modelling low stress abrasive wear, 103
Wear particle
Taguchi method friction characteristics and the wear process of metal pairs in sliding
application of Taguchi method for optimization of finishing conditions contacts—with applications to modelling wear of power plant com-
in magnetic float polishing (MFP), 59 ponents, 148
Temperature Wear rate
apparatus for measurement of engagement characteristics of a wet effect of SiC particle reinforcement on the unlubricated sliding wear
clutch, 140 behaviour of ZA-27 alloy composites, 33
Temperature dependence Wear response
temperature dependence of sliding wear behavior in SiC whisker or slurry erosive wear characteristics of a hard faced steel: effect of
SiC particulate reinforced 6061 aluminum alloy composite, 21 experimental parameters, 41
Ti-based coating Wear scar
comparison of tribological behavior of three films—TiN, TiCN and friction characteristics and the wear process of metal pairs in sliding
CrN—grown by physical vapor deposition, 165 contacts—with applications to modelling wear of power plant com-
Titanium alloy ponents, 148
improving the fretting wear resistance of titanium alloy by laser beam Wear traces
quenching, 135 wear mechanisms of polyetheretherketone composites filled with vari-
Transfer film ous kinds of SiC, 54
wear mechanisms of polyetheretherketone composites filled with vari- Wear transition
ous kinds of SiC, 54 influence of pre-formed boundary layers on wear transition in sliding
Tribochemical reaction lubricated contacts, 117
the initial step of tribochemical reactions of perfluoropolyether on Wet clutch
amorphous carbon, 112 apparatus for measurement of engagement characteristics of a wet
Tribological behaviour clutch, 140
wear mechanisms of polyetheretherketone composites filled with vari- Wheel/rail contact
ous kinds of SiC, 54 rail head corrugation growth predictions based on non-linear high
comparison of tribological behaviour of three films—TiN, TiCN and frequency vehicle/track interaction, 90
CrN—grown by physical vapor deposition, 165
Tribological properties XPS analysis
tribological study of CN, films prepared by reactive d.c. magnetron friction and wear properties of a surface-modified TiO, nanoparticle as
sputtering, 80 an additive in liquid paraffin, 29
Tribology
tribological properties of nitrogen ion implanted WC-Co, 131 ZA-27 alloy
effect of SiC particle reinforcement on the unlubricated sliding wear
behaviour of ZA-27 alloy composites, 33
Unsteady Zirconia
unsteady squeeze film between rectangular plates, 98 wear resistance ofz irconias. Dielectrical approach, 13