Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear 1997: Vol 212 Index

7 Pages·1997·1 MB·English

¥
ELSEVIER Wear 212 (19972)7 1
Author Index of Volume 212
AbharyK,. , 131 Hand, D.P., 221 Olver, A.V., 265 Su, Y.L., 85
Aleem, A., 140 Hawk, J.A., 110 Swarnamani, S., 33
Alpas, A.T., 41 Hug, M.Z., 151 Parslow, G.1., 103
Aslanyan, L.R., 160 Pidduck, A.J., 254 : ’
Jain. V-K.. | Pietrasik. R.. 199 retlow, 5. 103
Barbezat, G., 66 Jakubowski. K.. 199 Prabhu. B.S.. 33 Tieu, A.K., 206 ;
Barton, J.S., 221 Jones. D.C. 221 Pui. D.Y.H..7 Tingquan, L., 195
Barykin, N.P., 160 Pukl. B.. 173 Tomita, Y., 183
Bermudez, M.-D., 188 ; Torrance, A.A., 213
Bozet. J.L.. 18 Kapoor, A., 119
el, ‘ Kevin Chou, Y., 59 Oiu. Z.L.. 206 Trivedi, H.K., |
Cadenas, M., 244 Kidd, S.R., 221 Randall, N.X., 18
‘arolan. T.A.. 221 Krishnamurthy, R., 78 Vijande, R., 244
‘arrion-Vilches, F.-J., 188 Kula, P., 199 Ravindra, H.V., 78 Vincent, L., 50
‘elis, J.P.. 151 Reddy, D.S.K., 33 Vodopivec, F., 173
‘hang, W.-R., 229 Liraut, G 13 Reid, L., 131 Vuoristo, P., 66
i. 2 138_ _ Reuben, R.L., 221
hen, D.-R.., Liu, J., 23 Reet 8 0
‘oban, A., 140 Liu, J.J.. 50 Wang, G.B., 25
Sadykov, F.A., 160 Wendler, B., 199
Dogan, C.P., 110
Mintyla, T., 66 Sami. M.. 140 Wilkinson, P., 221
Eda, H., 183 Mao, S., 238 Sauger, E., 50 Wilson, S., 41
Evans, C.J., 59 Martinez-Nicolas, G., 188 Shuja, S.Z.. 140 Woo, K.-S., 7
Montes, H.J., 244 Sierra, J.M., 244
Feng, D., 238 Morris, Jr. , J.W., 165 Skarpelos, P., 165
Yao, S.H., 85
Fucheng, Z., 195 Smith, G.C., 254
Yilbas, B.S., 140
Nacy, S.M., 95 Spuzic, S., 131
Galligan, J., 213 Nickel, J., 140 Srinivasa, Y.G., 78
Gao, J., 238 Niemi, K., 66 Stephenson, D.J., 103 Zec, M., 131
Ghomashchi, R., 13 Nieminen, R., 66 Strutt, J.E., 103 Zhou, Z.R., 50
Elsevier Science S.A

ELSEVIER
Wear 212 (1997) 273-276
Subject Index of Volume 212
Abrasion Coast down
fractional design of experiments applied to a wear simulation, 13 experimental investigation on the performance characteristics of tilting
Abrasive wear pad journal bearings for small L/D ratios, 33
role of zirconia toughening in the abrasive wear of intermetallic and Coatings
ceramic composites, 110 wear behaviour of laser cladded and plasma sprayed WC-Co coatings,
Acoustic emission 244
acoustic emission for tool condition monitoring in metal cutting, 7 correlation factors for the 2D coated Hertzian contact problem, 265
Adamite Coefficient of friction
fractional design of experiments applied to a wear simulation, 13 the fretting behaviour of AISi7Mg-T6, 173
Additives Composites
tribological properties of liquid crystals as lubricant additives, 188 role of zirconia toughening in the abrasive wear of intermetallic and
AFM ceramic composites, 110
scanning probe microscopy of automotive anti-wear films, 254 Contact stress
Airborne contaminants wear by plastic ratchetting, 119
effect of airborne contaminants on magnetic head wear, 7 correlation factors for the 2D coated Hertzian contact problem, 265
Alumina Contact width
role of zirconia toughening in the abrasive wear of intermetallic and correlation factors for the 2D coated Hertzian contact problem, 2
ceramic composites, 1 10 Copper
Aluminium alloy the influence of strain—heat processing on copper wear, 160
the fretting behaviour of AlSi7Mg-T6, 173 Cubic boron nitride (CBN) tools
influence of grinding fluid on ultra precision processing of high purity tool wear mechanism in continuous cutting of hardened tool steels, 59
aluminium alloy by grinding stone, 183
Aluminium alloys Debris
wear mechanism maps for metal matrix composites, 41 tribochemical effects of some polymers/ stainless steel, 238
Amsler test Diamond-like carbon
scanning probe microscopy of automotive anti-wear films, 2 the effect of diamond-like carbon coatings on the rolling fatigue and
Anti-wear film wear of MSO steel, |
scanning probe microscopy of automotive anti-wear films Dissipated energy
Asperity contact reproducibility of friction and wear results in ball-on-disc unidirec
scanning probe microscopy of automotive anti-wear films, 254 tional sliding tests of TiN—alumina pairings, 151
Austenitic manganese steel
a study of friction-induced martensitic transformation for austenitic Elastic—plastic contact
manganese steel, 195 an elastic-plastic contact model for a rough surface with an ion-plated
soft metallic coating, 229
Bore polishing Electrogalvanized sheet steel
a model of the friction of a smooth hard surface sliding over a softer the effect of surface morphology on friction during forming of electro-
one, 213 galvanized sheet steel, 165
Boundary fiction Erosion indication technique
a model of the friction of a smooth hard surface sliding over a softer paint layer erosion resistance behaviour for use in a multilayer paint
one, 213 - erosion indication technique, 103
Experimental
Cam follower identification of sixteen force coefficients of two journal bearings from
scanning probe microscopy of automotive anti-wear films, 254 impulse responses, 206
Experiments
Carbide sizes
tool wear mechanism in continuous cutting of hardened tool steels, 59 experimental investigation on the performance characteristics of tilting
Chamfering pad journal bearings for small! L/D ratios, 33
effect of chamfering on side-leakage flow rate of journal bearings, 95
Chromium carbonitride (Cr(C,N) ) Face milling
the tribological potential of CrN and Cr(C,N) deposited by multi-arc surface features as indicators of tool chipping in single point face mill-
PVD process, 85 ing of aluminium, 221
Chromium nitride (CrN ) Fibre optic probe
the tribological potential of CrN and Cr(C,N) deposited by multi-arc surface features as indicators of tool chipping in single point face mill-
PVD process, 85 ing of aluminium, 221
Elsevier Science S.A
274 Subject Index of Volume 212 / Wear 212 (1997) 273-276
Force coefficient LFM
identification of sixteen force coefficients of two journal bearings from scanning probe microscopy of automotive anti-wear films, 254
impulse responses, 206 Liquid crystals
Fractional experimental design tribological properties of liquid crystals as lubricant additives, 188
fractional design of experiments applied to a wear simulation, 131
Fretting MSO steel
nucleation and early growth of tribologically transformed structure the effect of diamond-like carbon coatings on the rolling fatigue and
(TTS) induced by fretting, 50 wear of MSO steel, |
the fretting behaviour of AISi7Mg-T6, 173 Magnetic recording
Fretting damage effect of airborne contaminants on magnetic head wear, 7
the fretting behaviour of AlSi7Mg-T6, 173 Mechanistic
Friction fractional design of experiments applied to a wear simulation, 131
reproducibility of friction and wear results in ball-on-disc unidirec Metal matrix composites
tional sliding tests of TiN—alumina pairings, 151 wear mechanism maps for metal matrix composites, 41
the effect of surface morphology on friction during forming of electro- Metal removal
galvanized sheet steel, 165 influence of grinding fluid on ultra precision processing of high purity
scanning probe microscopy of automotive anti-wear films, 254 aluminium alloy by grinding stone, 183
Friction-induced transformation Microstructure
a study of friction-induced martensitic transformation for austenitic fractional design of experiments applied to a wear simulation, 13
manganese steel, 195 Molybdenum disilicide
role of zirconia toughening in the abrasive wear of intermetallic and
Grinding fluid ceramic composites, 110
influence of grinding fluid on ultra precision processing of high purity Mossbauer spectroscopy
aluminium alloy by grinding stone, 183 a study of friction-induced martensitic transformation for austenitic
Grinding stone manganese steel, 195
influence of grinding fluid on ultra precision processing of high purity Multi-arc physical vapour deposition (PVD)
aluminium alloy by grinding stone, 183 the tribological potential of CrN and Cr(C,N) deposited by multi-arc
PVD process, 85
Hard coatings Multidisciplinary
the effect of diamond-like carbon coatings on the rolling fatigue and fractional design of experiments applied to a wear simulation,
wear of M50 steel, |
Hardened surface layers Nanoindentation
the effect of hydrogen in lubricated frictional couples, 199 nanoindentation and scanning force microscopy as a novel method for
Hard turning the characterization of tribological transfer films, 18
tool wear mechanism in continuous cutting of hardened tool steels, 59 Normal contact
Head wear an elastic—plastic contact model for a rough surface with an ion-plated
effect of airborne contaminants on magnetic head wear, 7 soft metallic coating, 229
Hertz Nucleation parameters
correlation factors for the 2D coated Hertzian contact problem, 265 nucleation and early growth of tribologically transformed structure
High-temperature oxidation (TTS) induced by fretting, 50
fractional design of experiments applied to a wear simulation, 131
HVOF
Oil whirl
rolling contact fatigue failure mechanisms in plasma and HVOF
identification of sixteen force coefficients of two journal bearings from
sprayed WC-Co coatings, 66
impulse responses, 206
Hydrogen tribosorption
Optical microscopy
the effect of hydrogen in lubricated frictional couples, 199
laser melting of plasma nitrided Ti-6AI-4V alloy, 140
Hydrogen wear
the effect of hydrogen in lubricated frictional couples, 199
Pad temperature
experimental investigation on the performance characteristics of tilting
Identification
pad journal bearings for small L/D ratios, 33
experimental investigation on the performance characteristics of tilting
Paint finish
pad journal bearings for small L/D ratios, 33
the effect of surface morphology on friction during forming of electro
Impulse response
galvanized sheet steel, 165
identification of sixteen force coefficients of two journal bearings from
Paint layers
impulse responses, 206
paint layer erosion resistance behaviour for use in a multilayer paint
erosion indication technique, 103
Journal bearings Pin-on-disk
effect of chamfering on side-leakage flow rate of journal bearings, 95 tribological properties of liquid crystals as lubricant additives, 188
identification of sixteen force coefficients of two journal bearings from Plasma
impulse responses, 206
wear behaviour of laser cladded and plasma sprayed WC-Co coatings,
244
Laser cladding Plasma nitriding
wear behaviour of laser cladded and plasma sprayed WC-Co coatings laser melting of plasma nitrided Ti-6AI-4V alloy, 140
244 Plasma spray
Laser melting rolling contact fatigue failure mechanisms in plasma and HVOF
laser melting of plasma nitrided Ti-6AI-—4V alloy, 140 sprayed WC-Co coatings, 66
Subject Index of Volume 212 / Wear 212 (1997) 273-276
Plastic ratchetting Surface roughness
wear by plastic ratchetting, 119 influence of grinding fluid on ultra precision processing of high purity
Polymer aluminium alloy by grinding stone, 183
tribochemical effects of some polymers/ stainless steel, 238
Power spectrum Thermal spraying
the effect of surface morphology on friction during forming of electro- rolling contact fatigue failure mechanisms in plasma and HVOF
galvanized sheet steel, 165 sprayed WC-Co coatings, 66
Process control Tilting pad
acoustic emission for tool condition monitoring in metal cutting, 78 experimental investigation on the performance characteristics of tilting
pad journal bearings for small L/D ratios, 33
Titanium alloy
Reproducibility laser melting of plasma nitrided Ti-6A]-4V alloy, 140
reproducibility of friction and wear results in ball-on-disc unidirec- Tool steels
tional sliding tests of TiN—alumina pairings, 151 tool wear mechanism in continuous cutting of hardened tool steels, 59
Rolling Tool wear
fractional design of experiments applied to a wear simulation, 131 tool wear mechanism in continuous cutting of hardened tool steels, 59
Rolling contact fatigue surface features as indicators of tool chipping in single point face mill-
the effect of diamond-like carbon coatings on the rolling fatigue and ing of aluminium, 221
wear of M50 steel, | Tribochemistry
rolling contact fatigue failure mechanisms in plasma and HVOF tribochemical effects of some polymers/ stainless steel, 238
sprayed WC-Co coatings, 66 Tribologically transformed structures
nucleation and early growth of tribologically transformed structure
(TTS) induced by fretting, 50
Scanning electron micrographs Tribological properties
fractional design of experiments applied to a wear simulation, 131 tribological properties of liquid crystals as lubricant additives, 188
Scanning force microscopy Tribological transfer films
nanoindentation and scanning force microscopy as a novel method for nanoindentation and scanning force microscopy as a novel method for
the characterization of tribological transfer films, 18 the characterization of tribological transfer films, 18
Scratch testing Tribology
fractional design of experiments applied to a wear simulation, 131 scanning probe microscopy of automotive anti-wear films, 254
Severe plastic deformation Tungsten carbide
the influence of strain—heat processing on copper wear, 160 wear behaviour of laser cladded and plasma sprayed WC-Co coatings,
Side leakage 244
effect of chamfering on side-leakage flow rate of journal bearings, 95 Two-disc testing
Signal error rate fractional design of experiments applied to a wear simulation, 131
effect of airborne contaminants on magnetic head wear, 7
Simulation Unidirectional sliding
fractional design of experiments applied to a wear simulation, 131 reproducibility of friction and wear results in ball-on-disc unidirec-
Sliding tional sliding tests of TiN—alumina pairings, 151
wear by plastic ratchetting, 119
Sliding wear Vanadium carbide
wear mechanisms in vanadium carbide coated steels, 25 wear mechanisms in vanadium carbide coated steels, 25
Soft coating Vanadizing
an elastic—plastic contact model for a rough surface with an ion-plated wear mechanisms in vanadium carbide coated steels, 25
soft metallic coating, 229 Videotape recorder
Solid particle erosion effect of airborne contaminants on magnetic head wear,
paint layer erosion resistance behaviour for use in a multilayer paint
erosion indication technique, 103 WC-Co
Spectral analysis wear behaviour of laser cladded and plasma sprayed WC-—Co coatings,
surface features as indicators of tool chipping in single point face mill- 244
ing of aluminium, 221 WC-Co coatings
Stainless steel rolling contact fatigue failure mechanisms in plasma and HVOF
tribochemical effects of some polymers/ stainless steel, 238 sprayed WC-Co coatings, 66
Steel—aluminum lubricated wear Wear
tribological properties of liquid crystals as lubricant additives, 188 the effect of diamond-like carbon coatings on the rolling fatigue and
Stochastic wear of M50 steel, |
fractional design of experiments applied to a wear simulation, 131 fractional design of experiments applied to a wear simulation, 131
Submicrocrystalline structure Wear debris
the influence of strain—heat processing on copper wear, 160 wear by plastic ratchetting, 119
Surface deposition reproducibility of friction and wear results in ball-on-disc unidirec-
wear mechanisms in vanadium carbide coated steels, 25 tional sliding tests of TiN—alumina pairings, 151
Surface finish Wear intensity
surface features as indicators of tool chipping in single point face mill- the influence of strain—heat processing on copper wear, 160
ing of aluminium, 221 Wear maps
Surface morphology wear mechanism maps for metal matrix composites, 41
the effect of surface morphology on friction during forming of electro- Wear mechanisms
galvanized sheet steel, 165 wear mechanisms in vanadium carbide coated steels, 25
276 Subject Index of Volume 212 /W ear 212 (1997) 273-276
Wear monitoring White layer
acoustic emission for tool condition monitoring in metal cutting, nucleation and early growth of tribologically transformed structure
Wear particle generation (TTS) induced by fretting, 50
effect of airborne contaminants on magnetic head wear, 7 Worn surface
the influence of strain—heat processing on copper wear, 160
Wear rate
wear behaviour of laser cladded and plasma sprayed WC-Co coatings, ZDDP
2, 44 scanning probe microscopy of automotive anti-wear films, 254
Wear resistance Zirconia-toughened
a study of friction-induced martensitic transformation for austenitic role of zirconia toughening in the abrasive wear of intermetallic and
manganese steel, 195 ceramic composites, 110