Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear 1997: Vol 209 Index PDF
Preview Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear 1997: Vol 209 Index
Wear 209 (1997) 339 Author Index of Volume 209 Ahmed, R., 84 Ibrahim, G.A., 13 Modi, O.P., 255 Tripathi, A.K., 134 Anabtawi, M.Z., 13 Ikeuchi, K., 179 Miller, M., 101 Tu, J.P., 31, 43 Mori, K., 128 Balan, C., 237 Jha, A.K., 255 Baoyu, S., 37 Jin, H., 193 Nabhan, M.B.W., 13 Van De Velde, F., 106 Barimani, C., 101 Jin, J.C., 193 Verma, V.K., 134 Pasierski, J., 219 Viens, D.V., 241 Barrau, J.J., 322 Bhattacharya, A., 134 Karpifiski, T., 213 Pawlus, P., 69 Bian, S., 171 Knotek, O., 101 PPlliecshktaa,c hJe.v,s 2k1y3, Yu.M., 123 Wang, P., 96, 301 Borland, D.W., 171 Kobayashi, S., 128 Wang, Q.-H., 316 Postlethwaite, J., 263 Kog, E., 184 Prabhu, B.S., 115 Weldon, W.F., 21 Campos, A., 274 Komvopoulos, K., 57 Prasad, B.K., 255 Weng, C.-L, 292 Chaochang, W., 308 Kovacevic, R., 284 Wu, C.L., 193 Kuhn, E., 237 Chaudhuri, D.K., 140 Qian, M., 308 Chen, K.Y., 160 Kumar, S., | Qu, J., 96 Kwasniak, E., 219 Xie, D., 140 Cho, S.-S., 57 Quesnel, D.J., 247 Xu, J., 316 Colclough, A.F., 229 Lahres, M., 241 Xue, Q., 8, 316 Roy, N.N., 1 Das, S., 255 Lakshmanan, A.N., 140 Riick, D.M., 49 Laube, B.L., 241 Dasgupta, R., 255 Yang, Y., 96 Le Bosse, J.C., 328 Sakai, M., 193 De Baets, P., 106 Yannacopoulos, S., 263 Lei, M.K., 301 Schmidt, H., 49 Ding, G., 96 Li, J., 153 Schminke, A., 49 Yegneswaran, A.H., 255 Yeomans, J.A., 229 Li, K.Y., 199 Seabra, J., 274 Yong, Z., 284 Ferrero, J.F., 322 Li, W.-L., 292 Shao, H., 96 Funkenbusch, P.D., 247 Lian, J.C., 199 Shen, W., 316 YYuo,s hiZn.aWk.,a , 30K1. , 179 Lin, J.F., 199 Smurugov, V.A., 123 Guo, S.Y., 153 Ligin, W., 37 Sottomayor, A., 274 YYuulainn,, LQ..J,. , 373 01 Liu, M.S., 31, 43 Stupnicki, J., 219 Hadfield, M., 84 Lopez, J., 328 Su, Y.L., 160 Hansali, G., 328 Lugscheider, E., 101 Sudheer Kumar Reddy, D., 115 Zhang, J., 8 Hedayat, A., 263 Swarnamani, S., 115 Zhang, Z., 8 Herman, D., 213 Mao, D.S., 153 Zhang, Z.L., 301 Hooke, C.J., 184 Mao, Z.Y., 43, 153 Tareza, K.R., 21 Zhou, Y., 247 Huang, Y., 301 Mathia, T., 328 Tomita, N., 179 Zimmermann, M., 241 Elsevier Science S.A. BA) ELSEVIER Wear 209 (1997) 341-345 Subject Index of Volume 209 Abrasion Bearing study of abrasion behavior of an advanced Al,O,-TiC-Co ceramic, a study of the inhibitive effect of Mo on the temper softening of bear- 153 ing surfaces caused by ion implantation, 193 Abrasion of steel Bending type wear characof at haerdfraceid ssteelt iin slcurrys, 2 55 analysis of aerodynamic multifloile jaoufrna l bearings, 115 Abrasive wear Bicrystal impact—abrasion behavior of low alloy white cast irons, 308 effects of grain boundary on deformation due to scratching in a Cu—Al Additive bicrystals having symmetrical < 111 > -tilt boundary, 128 synthesis, structure and lubricating properties of dialkyldithiophos- phate-modified Mo—S compound nanoclusters, 8 Adhesion thermal fluctuations at PTFE friction and transfer, 123 Carbide Adulterated strengthening the influence of niobium, chromium, molybdenum and carbon on the a study of the inhibitive effect of Mo on the temper softening of bear- sliding wear behavior of nickel-base hardfacing alloys, 160 ing surfaces caused by ion implantation, 193 Carbon dioxide AES wear and CO, corrosion of steel couplings and tubing in heavy oil a study in the tribochemistry of alkyldithioabndi tuherier tMos— S screw-pump wells, 263 complexes as EP additives, 134 CBN A glass-crystalline binder investigatioofn tsh e wear of cubic boron nitride cutting tools using effect of glass-crystalline and amorphous binder application to abra- Auger electron spectroscopy and X-ray analysis by EPMA, 241 sive tools made of microcralyumisnat graailns ltyipe nSG,e 2 13 Ceramic coatings A grinding index some remarks concerning scuffing of ceramics slid against steel, 219 effect of glass-crystalline and amorphous binder application to abra- Ceramic matrix composite sive tools made of microcrystalline alumina grains type SG, 213 hard particle erosion of silicon carbide and silicon carbide-titanium Alumina coatings diboride from room temperature to 1000 °C, 229 the effect of electrolneicsksel film on the tribological characteristics of Ceramics alumina coatings, 199 hard particle erosion of silicon carbide and silicon carbide—titanium A micro-abcrasirve ygrasin tof aalumlinal ofi thne SeG ty pe diboride from room temperaturet o 1000 °C, 229 effect of glass-crystalline and amorphous binder application to abra- Chaotic erosion sive tools made of microcrystalline alumina grains type SG, 213 modeling of jetflow drilling with consideration of the chaotic erosion An active surface of a grinding wheel histories of particles, 284 effect of glass-crystalline and amorphous binder application to abra- Coating sive tools made of microcrystalline alumina grains type SG, 213 studyon loading capacity of the coating-susybstsemt orfa vatpoeur - Anti-wear deposited TiN and TiC on bearing balls II. Rubbing method in studies to evaluate the extreme pressure and anti-wear activity of some experiments and analysis, 37 thiuram disulphides, xanthogens and dithiocarbamates, | erosion resistance of Ni-WC self-fluxing alloy coating at high temper- ATC ceramic ature, 43 study of abrasion behavior of an advanced Al,O,-TiC-Co ceramic, laser cladding coating against erosion—corrosion wear and its applica- 153 tion to mining machine parts, 96 Auger Contact zone investigations of the wear of cubic boron nitride cutting tools using thermal fluctuations at PTFE friction and transfer, 123 Auger electron spectroscopy and X-ray analysis by EPMA, 241 Corrosion Auger electron spectroscopy wear and CO, corrosion of steel couplings and tubing in heavy oil tribological studies of plasma source ion nitrided low alloy tool steel, screw-pump wells, 263 301 Coupling Average flow model wear and CO, corrosion of steel couplings and tubing in heavy oil modified average Reynolds equation for ultra-thin film gas lubrication screw-pump wells, 263 considering roughness orientations at arbitrary Knudsen numbers, Crack propagation 292 finite element analysis of subsurface crack propagation in a half-space due to a moving asperity contact, 57 Backscattering spectrometry Cylinder tribological behaviour of ion-implanted Ti6AI4V sliding against poly- change of cylinder surface topography in the initial stage of engine mers, 49 life, 69 Elsevier Science S.A. 342 SubIjndexe ocf Vtolu me 209 / Wear 209 (1997) 341-345 Dry friction a study in the tribochemistry of alkyldithioabndi tuherire tMos- S study of dry friction under small displacements and near-zero sliding compasl EPe adxditievess, 1 34 velocity, 322 studies to evaluate the extreme pressure and anti-wear activity of some Elastohydrodynamic thiuram disulphides, xanthogens and dithiocarbamates,| analysis of aerodynamic multileaf foil journal bearings, 115 Friction energy traction coefficient in a roller—inner ring EHD contact in a jet engine experimental procedure for the evaluation of the friction energy of roller bearing, 274 lubricating greases, 237 Electroless plating Friction force the effect of electroless nickel film on the tribological characteristics of thermal fluctuations at PTFE friction and transfer, 123 tribological studies of plasma source ion nitrided low alloy tool steel, Gear pumps 301 an experimental investigation into the desigann d performance of Emulsions hydroloasded tfloaatintg weiar cplataes iln glear ypum ps, 184 analysis of hydrodynamic journal bearings lubricated with a binary Glaannglec X-riay ndiffgract ion water-based lubricant, 13 tribological studies of plasma source ion nitrided low alloy tool steel, EP 301 a study in the tribochemistry of alkyldithioabndi tuherier tMos— S Gouging compasl EPe adxditievess, 1 34 metal gouging at low relative sliding velocities, 21 Erosion Grain boundary erosion resistance of Ni-WC self-fluxing alloy coating at high temper- effects of grain boundary on deformation due to scratching in a Cu-Al ature,4 3 bicrhyavisngt syammletrsica l < 111 > -tilt boundary, 128 Grease diboride from room temperature to 1000 °C, 229 experimental procedure for the evaluation of the friction energy of Erosion—corrosiwoena r lubricating greases, 237 Grinding tion to mining machine parts, 96 stress distributions at the abrasive—matrix interface during tool wear in Eutectic carbide bound abrasive grinding—a finite element analysis, 247 impacbethavi—or aof lbow arlloya whsite icasto ironns, 308 Experimental Hardfacing an experimental investigation into the design and performance of the influence of niobium, chromium, molybdenum and carbon on the hydroloasded tfloaatintg weiar cplataes iln glear ypum ps, 184 sliding wear behavior of nickel-base hardfacing alloys, 160 Extreme pressure wear charaocf at haerdfracedi ssteelt ini slcurrys, 2 55 studies to evaluate the extreme pressure and anti-wear activity of some Hardness thiuram disulphides, xanthogens and dithiocarbamates,| the influence of stacking fault energy on the wear resistance of nickel base alloys, 140 Failure Hard turning study on loading capacity of the coating—substraie system of vapour- investigations of the wear of cubic boron nitride cutting tools using deposited TiN and TiC on bearing balls II. Rubbing method in Auger electron spectroscopy and X-ray analysis by EPMA, 241 experianmd aenanlystiss, 37 High veloslcidiing tconyta ct Fe,Al alloys metal gouging at low relative sliding velocities,2 1 wet abrasive wear of ordered Fe,Al alloys, 31 FEA Hydrodynamic lubrication analysis of hydrodynamic journal bearings lubricated with a binary stress distributions at the abrasive—matrix interface during tool wear in water-based lubricant, 13 bound abrasive grinding—a finite element analysis, 247 Hydrogen attack Fine film thermal fluctuations at PTFE friction and transfer, 123 wet abrawesar iofv oreder ed Fe,Al alloys3, 1 Hydrostatically loaded Finite element method an experimental investigation into the design and performancoef finite element analysis of subsurface crack propagation in a half-space hydrostatically loaded floating wear plates in gear pumps, 184 due to a moving asperity contact, 57 analysis of aerodynamic multileaf foil journal bearings, 115 Hypervelocity metal gouging at low relative sliding velocities, 21 Floawteair nplgate s an experimental investigation into the design and performance of hydroloasded tfloaatintg weiar cplataes iln glear ypump s, 184 Impact abrasion Foil bearing impact-abrasion behavior of low alloy white cast irons, 308 analysis of aerodynamic multileaf foil journal bearings, 115 Implantation temper Fracture mechanics a study of the inhibitive effect of Mo on the temper softening of bear- finite element analysis of subsurface crack propagation in a half-space ing surfaces caused by ion implantation, 193 due to a moving asperity contact, 57 Interface Fracture toughness stress distributions at the abrasive—matrix interface during tool wear in study of abrasion behavior of an advanced Al,O,-TiC-Co ceramic, bound abrasive grindifinnitge e—leamen t analysis, 247 153 Internal grinding Friction effect of glass-crystalline and amorphous binder application to abra- finite element analysis of subsurface crack propagation in a half-space sive tools made of microcrystalline alumina grains type SG, 213 due to a moving asperity contact, 57 lon implantation the friction and wear behaviour of polyamide 6 sliding against steel at tribological behaviouro f ion-implanted Ti6AI4V sliding against poly- low velocity under very high contact pressures, 106 mers,4 9 Subject Index of Volume 209 /W ear 209 (1997) 341-345 a study of the inhibitive effect of Mo on the temper softening of bear- Morphoolf toheg weiare tsrac es ing surfaces caused by ion implantation, 193 the effect of nanometer SiC filler on the tribological behavior of PEEK, 316 Jetflow drilling MoS, modeling of jetflow drilling with consideration of the chaotic erosion synthesis, structure and lubricating properties of dialkyldithiophos- histories of particles, 284 phate-Mo—mS ocomdpouind fnaniocleustedrs, 8 Joint prostheses Mucus tribological behaviour of ion-implanted Ti6AI4V sliding against poly- low invasive propulsion of medical devices by traction using mucus, mers, 49 179 Journal bearings analysis of hydrodynamic journal bearings lubricated with a binary Nanocluster water-based lubricant, 13 synthesis, structure and lubricating properties of dialkyldithiophos- phate-modified Mo—S compound nanoclusters, 8 Laser cladding Nanometer SiC filled polyetheretherketone (PEEK) composite Laser cladding coating against erosion—corrosion wear and its applica- the effect of nanometeSirC filleor n the tribological behavioro f tion to mining machine parts, 96 PEEK, 316 Lateral fracture Nickel hard particle erosion of silicon carbide and silicon carbide—titanium the effect of electroless nickel film on the tribological characteristics of diboride from room temperature to 1000 °C, 229 alumina coatings, 199 Light scattering Nickel alloys charactoef rsurifasce arotugihneossn b y laser light scattering: specu- the influoef sntacckein g fault energy on the wear resistance of nickel larly scattered intensity measurement, 328 base alloys, 140 Loading capacity Nickel-base alloy study on loading capacity of the coating—susybstsemt orfa vatpoeur - the influence of niobium, chromium, molybdenum and carbon on the deposited TiN and TiC on bearing balls II. Rubbing method in sliding wear behavior of nickel-base hardfacing alloys, 160 experiments and analysis, 37 Niobium Low alloy tool steel the influence of niobium, chromium, molybdenum and carbon on the tribological studies of plasma source ion nitrided low alloy tool steel, sliding wear behavior of nickel-base hardfacing alloys, 160 301 Non-linear behaviour Low temperature depostion study of dry friction under small displaacnd enemar-ezerno tslisdi ng PVD coatings for lubricant-free tribological applications, 101 velocity, 322 Lubricant Non-steady motion synthesis, structure and lubricating properties of dialkyldithiophos- experimental procedure for the evaluation oft he friction energy of phate-modified Mo—S compound nanoclusters, 8 lubricating greases, 237 a study in the tribochemistry of alkyldithioabndi tuhreier tMso— S compasl EPe adxditievess, 1 34 Overload Lubricanbta-llf breaerieng s the friction and wear behaviour of polyamide 6 sliding against steel at PVD coatings for lubricant-free tribological applications, 101 low velocity under very high contact pressures, 106 Lubricati traction coefficient in a roller—inner ring EHD contact in a jet engine Piston skirt roller bearing, 274 change of cylinder surface topography in the initial stage of engine life, 69 Magnetron sputter ion plating Plasma source ion nitriding PVD coatings for lubricant-free tribological applications, 101 tribological studies of plasma source ion nitrided low alloy tool steel, Mechanical properties 301 study of dry friction under small displacements and near-zero sliding Polyamide 6 velocity, 322 the friction and wear behaviour of polyamide 6 sliding against steel at Medical device low velocity under very high contact pressures, 106 low invasive propulsion of medical devices by traction using mucus, PVD-technology 179 PVD coatings for lubricant-free tribological applications, 101 Metal cobalt Quasi-static ind : study of abrasion behavior of an advanced Al,O,-TiC-Co ceramic, 153 hard particle erosion of silicon carbanid sdileico n carbide—titanium Misfit angle diboride from room temperature to 1000 °C, 229 effects of grain boundary on deformation due to scratching in a Cu-Al bicrhyavsingt saymmletrsica l < 111 > -tiltb oundary, 128 Railguns Modelling of wear metal gouging at low relative sliding velocities, 21 change of cylinder surface topography in the initial stage of engine Rarefied gas lubrication life, 69 modified average Reynolds equation for ultra-thin film gas lubrication Molecular-kinetic processes considering roughness orientations at arbitrary Knudsen numbers, thermal fluctuations at PTFE friction and transfer, 123 292 Molybdenum Residual stress the influence of niobium, chromium, molybdenum and carbon on the experimental measurement of the residual stress field within thermally sliding wear behavior of nickel-base hardfacing alloys, 160 sprayed rolling elements, 84 Mo* + N* implantation Rheology a study of the inhibitive effect of Mo on the temper softening of bear- experimental procedure for the evaluation of the friction energy of ing surfaces caused by ion implantation, 193 lubricating greases, 237 344 Subject Index ofV olume 209 / Wear 209 (1997) 341-345 Rocket sleds Stick-slip metal gouging at low relative sliding velocities, 21 the friction and wear behaviour of polyamide 6 sliding against steel at Roller bearing low velocity under very high contact pressures, 106 traction coefficient in a roller—inner ring EHD contact in a jet engine Stress roller bearing, 274 stress distributions at the abrasive—matrix interface during tool wear in Rolling contact fatigue bound abrasive grinding—a finite element analysis, 247 experimental measurement of the residual stress field within thermally Stress intensity factor sprayed rolling elements, 84 finite element analysis of subsurface crack propagation in a half-space Roughness orientations due to a moving asperity contact, 57 Subsucrrackf maechcaneism s considering roughness orientations at arbitrary Knudsen numbers, finite element analysis of subsurface crack propagation in a half-space 292 due to a moving asperity contact, 57 Roughness parameters Surface roughness characterisation of surface roughness by laser light scattering: specu- characterisation of surface roughness by laser light scattering: specu- larly scattered intensity measurement3,2 8 larly scattered intensity measurement, 328 Rubbing method Surface topography study on loading capacity of the coating—substrate system of vapour- change of cylinder surface topography in the initial stageo fe ngine deposited TiN and TiC on bearing balls II. Rubbing method in life,6 9 experiamnde annatlyssis , 37 Surface iraction Running-in finite element analysis of subsurface crack propagation in a half-space change of cylinder surface topography in the initial stage of engine due to a moving asperity contact, 57 life,6 9 Synergism Laser cladding coating against erosion—corrosion wear and its applica- tion to mining machine parts, 96 Scratch hardness effects of grain boundary on deformation due to scratching in a Cu-Al Tester bicrhyavsingt saymmletrsica l < 111 > -tiltb oundary, 128 study on loading capacity of the coating—substrate system of vapour- Scratch width deposited TiN and TiC on bearing balls I]. Rubbing method in effects of grain boundary on deformation due to scratching in a Cu-Al experiments and analysis, 37 bicrhyavsingt saymmletrsica l < 111 > -tilt boundary, 128 Thermal spray coatings Screw-pump oil-well experimental measurement of the residual stress field within thermally wear and CO, corrosion of steel couplings and tubing in heavy oil sprayed rolling elements, 84 screw-pump wells, 263 Scuffing studies to evaluate the extreme pressure and anti-wear activity of some some remarks concerning scuffing of ceramics slid against steel, 219 thiuram disulphides, xanthogens and dithiocarbamates, | Self-lubrication Titanium thermal fluctuations at PTFE friction and transfer, 123 tribological behaovf iion-oimuplarnte d Ti6AI4V sliding against poly- SEM mers, 49 a study in the tribochemistry of alkyldithioabndi tuherier tMos- S Tool wear complase EPx adeditsive s, 134 investigations of the wear of cubic boron nitride cutting tools using investigations of the wear of cubic boron nitride cutting tools using Auger electron spectroscopy and X-ray analysis by EPMA, 241 Auger electron spectrosacndo Xp-yra y analysisb y EPMA, 241 Traction drive Simple sheanng low invasive propulsion of medical devices by traction using mucus, experimental procedure for the evaluation of the friction energy of 179 lubricating greases, 237 Traction evaluation traction coefficient in a roller—inner ring EHD contact in a jet engine study of dry friction under small displacements and near-zero sliding roller bearing, 274 velocity3,2 2 Transfer film Sliding wear the effect of nanometer SiC filler on the tribological behavior of the influence of niobium, chromium, molybdenum and carbon on the PEEK, 316 sliding wear behavior of nickel-base hardfacing alloys, 160 Transfer layer unlubricated sliding wear of steels: towards an alternative wear equa- thermal fluctuations at PTFE friction and transfer, 123 tion, 171 Tribological behavior Slurry abrasion the effect of nanometer SiC filler on the tribological behavior of wear characof at haerdfracedi ssteelt ini slcurrsy, 255 PEEK, 316 Speof erotdati on Tnibological property wear characof at haerdfraceid ssteelt ini slcurrsy, 2 55 tribological studies of plasma source ion nitrided low alloy tool steel, 301 low invasive propulsion of medical devices by traction using mucus, Tribology 179 metal gouging at low relative sliding velocities, 21 Stacfkauilt nengerg y Tubing the influence of stacking fault energy on the wear resistance of nickel wear and CO, corrosion of steel couplings and tubing in heavy oil base alloys1,4 0 screw-pump wells, 263 Tungsten carbide study of dry friction under small displacements and near-zero sliding erosion resistance of Ni-WC self-fluxing alloy coating at high temper- velocity3,2 2 ature,4 3 Subject Index of Volume 209 / Wear 209 (1997) 341-345 Ultra-thin film Wear resistance modified average Reynolds equation for ultrfailm- gats lhubriicnati on the influence of stacking fault energy on the wear resistance of nickel considering roughness orientations at arbitrary Knudsen numbers, base alloys1,4 0 292 Wear response wear characof at haerdfracedi ssteelt ini slcurrys, 2 55 Water Wear scar wet abrasive wear of ordered Fe,Al alloys, 31 studies to evaluate the extreme pressure and anti-wear activity of some Wear thiuram disulphides, xanthogens and dithiocarbamates, | the friction and wear behaviour of polyamide 6 sliding against steel at White cast iron low velocity under very high contact pressures, 106 impact—abrasion behavior of low alloy white cast irons, 308 Wear equation unlubricated sliwdeari onf sgteel s: towaan raltdernsati ve wear equa- tion, 171 Wear mechanisms Zero-wear investigations of the wear of cubic boron nitride cutting tools using change of cylinder surface topography int he initial staofg enegin e Auger electron spectroscopy and X-ray analysis by EPMA, 241 life, 69
The list of books you might like
