Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear 1996: Vol 198 Index

7 Pages·1996·1.6 MB·English

R Wear 198 (1996) 315
Author Index of Volume 198
Afaghani, J.E.D., 229 Hu, S., 197 Maleque, M.A., 293 Shimizu, K., 150
Afanasyev, S.N., 280 Hwang, C.-C., 156 Masjuki, H.H., 293 Smith, R.W., 251
Arsecularatne, J.A., 220 Mathew, P., 220 Sun, Y., 300
Mecholsky, J.J., 197 Szolwinski, M.P., 93
Batchelor, A.W., 208 Ikeda, H., 71 Middleton, R.H., 39
Bell, T., 300 Ishihara, T., 169 Mills, B., 192 Takasaki, H., 150
Bloyce, A., 300 Mizuno, T., 176 Tang, J., 165
Bonis, M., | Jin, W., 236 Mohanty, M., 251 Tang, X., 287
Bower, A.F., 15 Jin, Y.B., 236 Mote, C.D., 115 Thomas, T.R., 271
Bronson, A., 267 Jr, ., 115, 197 Mulki, H., 176 Tian, Y., 1
Celis, J.P., 251
Nakamoto, T., 229
Chandrasekaran, M., 208 Kallas, P., 77 Wang, Q., 216
Nakayama, K., 52, 71
Checkina, O.G., 33 Kamada, T., 150 Wang, X., 287
Ngai, T.L., 129
Chen, K., 108 Karmakar, S., 242 Wang, Y., 287
Chen, L., 165 Kobayashi, T., 52 Noguchi, T., 150 Wang, Y.K., 115
Chen, Y.W., 58 Kovalev, A.I., 280 Wilkie, B.A., 39
Ohlsson, R., 271
Chen, Z., 197 Krasnik, V.G., 33 Wu, J.D., 7
Oliveira, S.A.G., 15
Cuneo, J.C., 197
Oxley, P.L.B., 220
Xia, W., 129
De Bonte, M., 251 Lam, L.N., 208 Xu, G., 307
Li, S., 122, 236 Prashad, H., 46
Xu, J., 216
Farris, T.N., 93 Li, $.Z., 122, 236
Xue, Q., 143, 185, 216
Fourka, M., 1 Li, Y., 129, 165 Qi, H.S., 192
Fowle, R.F., 220 Liang, Y.N., 122, 236
Fox-Rabinovich, G.S., 280 Lin, J.F., 7, 58 Rao, U.R.K., 242 Yamaguchi, K., 229
Lin, J.-R., 156 Rosén, B.-G., 271 Yang, R.-F., 156
Garbar, I.1., 86 Lin, L., 185 Yen, B.K., 169
Goryacheva, I., 307 Lin, R.J., 136 Sadeghi, F., 307 Yu, S., 108
Goryacheva, I.G., 33 Lin, S.C., 136 Serratos, M., 267
Griffiths, B.J., 39 Liu, H., 143, 185, 216 Sethuramiah, A., 242 Zhang, B., 287
Liu, M.H., 7 Shen, W., 216, 287 Zhang, R.H., 122
He, Z., 108 Liu, Y., 287 Shi, Z., 300 Zhang, W., 129
Horaguchi, I., 229 Lugscheider, E., 251 Shih, M.G., 58 Zhao, W., 165
Elsevier Science S.A.

Wear 198 (1996) 317-320
Subject Index of Volume 198
Abrasion Carbon film
wear maps of TZP/steel reciprocating sliding couple under dry sliding, triboemission characteristics of electrons during wear of amorphous
185 carbon and hydrogenated amorphous carbon films in a dry air
Abrasive wear atmosphere, 71
indentation energy and abrasive wear of metals, 77 Ceramic coatings
Adherent layers analysis of the friction and wear mechanism of structural ceramic
on the formation mechanism of adherent layers on a cutting tool, 192 coatings. Part 2: The effect of operating conditions and substrate
Adiabatic shear band material, 7
a study on the behavior of adiabatic shear bands in impact wear, 287 Ceramics
Air bearing damage processes in Si,N, bearing material under contact loading, 197
prediction of the stability of air thrust bearings by numerical, analytical Characterization
and experimental methods, 1 wear of cylinder bore microtopography, 271
ALO; Coating
dry sliding friction and wear behaviour of short fibre reinforced an analysis of fracture and delamination in thin coatings subjected to
zinc-based alloy composites, 108 contact loading, 15
AI-Si alloy Coating cracks
effect of humidity on friction and wear of Al-Si eutectic alloy and changes in surface texture of zinc-coated steel sheets under plastic
AI-Si alloy—graphite composites, 169 deformation, 176
Aluminium bronze Coefficient of friction
influence of surface melting on dry rolling—sliding wear of aluminium the tribological properties of TZP-graphite self-lubricating ceramics,
bronze against steel, 300 143
Aluminum alloy/graphite composite Composite
the tribological performance of 6061 aluminum alloy/ graphite effect of fiber orientation on a graphite fiber composite in single
composite materials in oil lubrications with EP additives, 58 pendulum scratching, 122
Aluminum-graphite composites characterization and application of the sliding wear of hardened die
effect of humidity on friction and wear of Al-Si eutectic alloy and steel against SiC whisker—plastic composite, 229
Al-Si alloy-graphite composites, 169 Computer modelling
Anti-wear characteristic the model for tool wear in rock cutting, 33
the effect of palm oil diesel fuel contaminated lubricant on sliding Condition monitoring
wear of cast irons against mild steel, 293 condition monitoring of the grinding process using light scattering, 39
Arbitrarily shaped Contact load
analysis of an arbitrary shaped guide bearing subject to normal damage processes in Si,N, bearing material under contact loading, 197
oscillation and translation of a plate, 115 Corrosion
Asperities the effect of oxygen partial pressure on the stability of Magneli phases
formation and separation of the fragmented surface structure of in high temperature corrosive wear, 267
low-carbon steel and copper under friction, 86 Crack nucleation
mechanics of fretting fatigue crack formation, 93
75/25 Cr3C,/NiCr
Bearing sliding wear behavior of thermally sprayed 75/25 Cr,;C,/NiCr wear
analysis of an arbitrary shaped guide bearing subject to normal resistant coatings, 251
oscillation and translation of a plate, 115 Cutting
Bearing materials the model for tool wear in rock cutting, 33
damage processes in Si,;N, bearing material under contact loading, 197 Cutting temperature
Bearings prediction of tool life in oblique machining with nose radius tools, 220
diagnosis of failure of rolling-element bearings of alternators—a study, Cutting tool
46 on the formation mechanism of adherent layers on a cutting tool, 192
Brinkman model Cutting tools
hydrodynamic lubrication of long, flexible, porous journal bearings characteristic features of wear in tools made of high-speed steels with
using the Brinkman model, 156 surface engineered coatings II: Study of surface engineered
high-speed steel cutting tools by AES, SIMS and EELFAS meth-
ods, 280
Cylinder liner
Cro
high friction coefficient of fullerene C7, film, 165 wear of cylinder bore microtopography, 271
Elsevier Science S.A.
318 Subject Index of Volume 198 / Wear 198 (1996) 317-320
Damage Graphite
damage processes in Si,N, bearing material under contact loading, 197 lubrication of stellite at ambient and elevated temperatures by transfer
Deformed band films from a graphite slider, 208
a study on the behavior of adiabatic shear bands in impact wear, 287 Grinding
Delamination condition monitoring of the grinding process using light scattering, 39
an analysis of fracture and delamination in thin coatings subjected to characterization and application of the sliding wear of hardened die
contact loading, 15 steel against SiC whisker-—plastic composite, 229
Hardness effect
Electric current influence of surface melting on dry rolling—sliding wear of aluminium
diagnosis of failure of rolling-element bearings of alternators—a study, bronze against steel, 300
46 Humidity
Electron effect of humidity on friction and wear of Al—Si eutectic alloy and Al-
triboemission characteristics of electrons during wear of amorphous Si alloy—graphite composites, 169
carbon and hydrogenated amorphous carbon films in a dry air HVOF spray process
atmosphere, 71 sliding wear behavior of thermally sprayed 75/25 Cr;C,/NiCr wear
Erosive wear resistant coatings, 251
progress of erosive wear in spheroidal graphite cast iron, 150 Hydrodynamic lubrication
hydrodynamic lubrication of long, flexible, porous journal bearings
Face milling using the Brinkman model, 156
tool wear monitoring in face milling using force signals, 136
Fatigue Impact wear
mechanics of fretting fatigue crack formation, 93 a study on the behavior of adiabatic shear bands in impact wear, 287
an approach towards fatigue wear modelling, 242 Indentation energy
Film indentation energy and abrasive wear of metals, 77
Infrared spectra
high friction coefficient of fullerene C79 film, 165
high friction coefficient of fullerene C7 film, 165
Finite element method
prediction of the stability of air thrust bearings by numerical, analytical Interface cracks
and experimental methods, 1 an analysis of fracture and delamination in thin coatings subjected to
contact loading, 15
Flexible
Iron fluoride
hydrodynamic lubrication of long, flexible, porous journal bearings
effect of dissolved oxygen on the formation of iron fluoride, friction
using the Brinkman model, 156
and wear in an iron/iron frictional system under perfluoropolyether
Fracture
fluid lubrication, 52
an analysis of fracture and delamination in thin coatings subjected to
contact loading, 15
Journal bearing
a study on the behavior of adiabatic shear bands in impact wear, 287
hydrodynamic lubrication of long, flexible, porous journal bearings
Fragmentation
using the Brinkman model, 156
formation and separation of the fragmented surface structure of
low-carbon steel and copper under friction, 86
Light scattering
Free surface roughening
condition monitoring of the grinding process using light scattering, 39
changes in surface texture of zinc-coated steel sheets under plastic
Lubricant
deformation, 176
high friction coefficient of fullerene C79 film, 165
Fretting
the effect of palm oil diesel fuel contaminated lubricant on sliding
mechanics of fretting fatigue crack formation, 93
wear of cast irons against mild steel, 293
Friction
Lubricated contacts
analysis of the friction and wear mechanism of structural ceramic
viscoelastic effects in lubricated contacts, 307
coatings. Part 2: The effect of operating conditions and substrate
Lubrication
material, 7
lubrication of stellite at ambient and elevated temperatures by transfer
effect of dissolved oxygen on the formation of iron fluoride, friction
films from a graphite slider, 208
and wear in an iron/iron frictional system under perfluoropolyether Lubricious oxides
fluid lubrication, 52
the effect of oxygen partial pressure on the stability of Magneli phases
influence of surface melting on dry rolling—sliding wear of aluminium in high temperature corrosive wear, 267
bronze against steel, 300
Frictional transfer Machining
lubrication of stellite at ambient and elevated temperatures by transfer on the formation mechanism of adherent layers on a cutting tool, 192
films from a graphite slider, 208 Magnetic flux
Friction and wear
diagnosis of failure of rolling-element bearings of alternators—a study,
dry sliding friction and wear behaviour of short fibre reinforced 46
zinc-based alloy composites, 108 Manganese
effect of humidity on friction and wear of Al-Si eutectic alloy and effects of Mn content on the tribological behaviors of Zn—27% Al-2%
Al-Si alloy—graphite composites, 169 Cu alloy, 129
Friction coefficient Maxwell model
effect of fiber orientation on a graphite fiber composite in single viscoelastic effects in lubricated contacts, 307
pendulum scratching, 122 Metallurgical coatings
high friction coefficient of fullerene C7, film, 165 characteristic features of wear in tools made of high-speed steels with
viscoelastic effects in lubricated contacts, 307 surface engineered coatings. II: Study of surface engineered high-
Subject Index of Volume 198 / Wear 198 (1996) 317-320
speed steel cutting tools by AES, SIMS and EELFAS methods, Perfluoropolyether
280 effect of dissolved oxygen on the formation of iron fluoride, friction
Metal matrix composite and wear in an iron/iron frictional system under perfluoropolyether
dry sliding friction and wear behaviour of short fibre reinforced fluid lubrication, 52
zinc-based alloy composites, 108 Pin-on-disk tests
Metals sliding wear behavior of thermally sprayed 75/25 Cr;C,/NiCr wear
indentation energy and abrasive wear of metals, 77 resistant coatings, 251
Microcracking Plastic deformation
wear maps of TZP/steel reciprocating sliding couple under dry sliding, changes in surface texture of zinc-coated steel sheets under plastic
185 deformation, 176
Microtopography wear maps of TZP/steel reciprocating sliding couple under dry sliding,
wear of cylinder bore microtopography, 271 185
Monitoring Plastic flow
tool wear monitoring in face milling using force signals, 136 formation and separation of the fragmented surface structure of
Morphologies of the wear traces low-carbon steel and copper under friction, 86
the effect of particle size of nanometer ZrO, on the tribological Plasticity index
behaviour of PEEK, 216 wear of cylinder bore microtopography, 271
Multiaxial fatigue Porous
mechanics of fretting fatigue crack formation, 93 hydrodynamic lubrication of long, flexible, porous journal bearings
using the Brinkman model, 156
Pseudoelasticity
Nanometer ZrO,-filled polyetheretherketone (PEEK) composite
wear behavior of a TiNi alloy, 236
the effect of particle size of nanometer ZrO, on the tribological
Pseudoplasticity
behaviour of PEEK, 216
wear behavior of a TiNi alloy, 236
Neural network
tool wear monitoring in face milling using force signals, 136
Nitrides Rock fracture
analysis of the friction and wear mechanism of structural ceramic the model for tool wear in rock cutting, 33
coatings. Part 2: The effect of operating conditions and substrate Rolling/sliding contact
material, 7 an approach towards fatigue wear modelling, 242
damage processes in Si,N, bearing material under contact loading, 197 Rolling contact
Non-linear analysis an analysis of fracture and delamination in thin coatings subjected to
prediction of the stability of air thrust bearings by numerical, analytical contact loading, 15
and experimental methods, | Rolling elements
Nose radius tools diagnosis of failure of rolling-element bearings of alternators—a study,
prediction of tool life in oblique machining with nose radius tools, 220 46
Rolling-sliding
influence of surface melting on dry rolling—sliding wear of aluminium
Oblique machining bronze against steel, 300
prediction of tool life in oblique machining with nose radius tools, 220 Roughness
Oil lubrication wear of cylinder bore microtopography, 271
the tribological performance of 6061 aluminum alloy/ graphite
composite materials in oil lubrications with EP additives, 58
Seizure
Orientation
the tribological performance of 6061 aluminum alloy/ graphite
characterization and application of the sliding wear of hardened die
composite materials in oil lubrications with EP additives, 58
steel against SiC whisker—plastic composite, 229
Sliding wear resistance
Orientation angle
sliding wear behavior of thermally sprayed 75/25 Cr,C,/NiCr wear
effect of fiber orientation on a graphite fiber composite in single
resistant coatings, 251
pendulum scratching, 122
Specific energy
Oscillation
effect of fiber orientation on a graphite fiber composite in single
analysis of an arbitrary shaped guide bearing subject to normal
pendulum scratching, 122
oscillation and translation of a plate, 115
Specific wear rate
Oxidation
the effect of palm oil diesel fuel contaminated lubricant on sliding
analysis of the friction and wear mechanism of structural ceramic
wear of cast irons against mild steel, 293
coatings. Part 2: The effect of operating conditions and substrate
Spheroidal graphite cast iron
material, 7
progress of erosive wear in spheroidal graphite cast iron, 150
Oxygen
Stability
effect of dissolved oxygen on the formation of iron fluoride, friction
prediction of the stability of air thrust bearings by numerical, analytical
and wear in an iron/iron frictional system under perfluoropolyether
and experimental methods, 1
fluid lubrication, 52
Steel
characteristic features of wear in tools made of high-speed steels with
Palm oil diesel surface engineered coatings II: Study of surface engineered
the effect of palm oil diesel fuel contaminated lubricant on sliding high-speed steel cutting tools by AES, SIMS and EELFAS meth-
wear of cast irons against mild steel, 293 ods, 280
Particle size of nanometer ZrO, Stellite
the effect of particle size of nanometer ZrO, on the tribological lubrication of stellite at ambient and elevated temperatures by transfer
behaviour of PEEK, 216 films from a graphite slider, 208
320 Subject Index of Volume 198 / Wear 198 (1996) 317-320
Strain limit Tribological behaviour
wear behavior of a TiNi alloy, 236 the effect of particle size of nanometer ZrO, on the tribological
Stribeck curve behaviour of PEEK, 216
the tribological performance of 6061 aluminum alloy/ graphite TZP ceramics
composite materials in oil lubrications with EP additives, 58 the tribological properties of TZP—graphite self-lubricating ceramics,
Structure 143
formation and separation of the fragmented surface structure of wear maps of TZP/steel reciprocating sliding couple under dry sliding,
low-carbon steel and copper under friction, 86 185
Suction TZP-graphite self-lubricating ceramics
analysis of an arbitrary shaped guide bearing subject to normal the tribological properties of TZP-graphite self-lubricating ceramics,
oscillation and translation of a plate, 115 143
Surface damage
diagnosis of failure of rolling-element bearings of alternators—a study, Vacuum
46 effect of dissolved oxygen on the formation of iron fluoride, friction
Surface finish and wear in an iron/iron frictional system under perfluoropolyether
condition monitoring of the grinding process using light scattering, 39 fluid lubrication, 52
characterization and application of the sliding wear of hardened die Viscoelastic layer
steel against SiC whisker-plastic composite, 229 viscoelastic effects in lubricated contacts, 307
Surface fracture
wear maps of TZP/steel reciprocating sliding couple under dry sliding, Wear
185 an analysis of fracture and delamination in thin coatings subjected to
Surface layer contact loading, 15
formation and separation of the fragmented surface structure of effect of dissolved oxygen on the formation of iron fluoride, friction
low-carbon steel and copper under friction, 86 and wear in an iron/iron frictional system under perfluoropolyether
Surface melting fluid lubrication, 52
influence of surface melting on dry rolling—sliding wear of aluminium formation and separation of the fragmented surface structure of
low-carbon steel and copper under friction, 86
bronze against steel, 300
Surface texture high friction coefficient of fullerene C79 film, 165
changes in surface texture of zinc-coated steel sheets under plastic on the formation mechanism of adherent layers on a cutting tool, 192
deformation, 176 characterization and application of the sliding wear of hardened die
steel against SiC whisker—plastic composite, 229
wear behavior of a TiNi alloy, 236
the effect of oxygen partial pressure on the stability of Magneli phases
in high temperature corrosive wear, 267
Test variables effect wear of cylinder bore microtopography, 271
sliding wear behavior of thermally sprayed 75/25 Cr3C,/NiCr wear the effect of palm oil diesel fuel contaminated lubricant on sliding
resistant coatings, 251 wear of cast irons against mild steel, 293
Thermodynamics influence of surface melting on dry rolling-sliding wear of aluminium
the effect of oxygen partial pressure on the stability of Magneli phases bronze against steel, 300
in high temperature corrosive wear, 267 Wear energy
TiNi alloy indentation energy and abrasive wear of metals, 77
wear behavior of a TiNi alloy, 236 Wear mechanism
Titanium carbide analysis of the friction and wear mechanism of structural ceramic
the effect of oxygen partial pressure on the stability of Magneli phases coatings. Part 2: The effect of operating conditions and substrate
in high temperature corrosive wear, 267 material, 7
Tool life Wear modelling
prediction of tool life in oblique machining with nose radius tools, 220 an approach towards fatigue wear modelling, 242
Tool wear Wear rate
the model for tool wear in rock cutting, 33 the tribological properties of TZP-graphite self-lubricating ceramics,
tool wear monitoring in face milling using force signals, 136 143
Transfer film Whisker
the effect of particle size of nanometer ZrO, on the tribological characterization and application of the sliding wear of hardened die
behaviour of PEEK, 216 steel against SiC whisker—plastic composite, 229
Transformed band White-etching layer
a study on the behavior of adiabatic shear bands in impact wear, 287 a study on the behavior of adiabatic shear bands in impact wear, 287
Translation
analysis of an arbitrary shaped guide bearing subject to normal Zinc-coated steel sheets
oscillation and translation of a plate, 115 changes in surface texture of zinc-coated steel sheets under plastic
Triboemission deformation, 176
triboemission characteristics of electrons during wear of amorphous Zn-Al alloy
carbon and hydrogenated amorphous carbon films in a dry air dry sliding friction and wear behaviour of short fibre reinforced
atmosphere, 71 zinc-based alloy composites, 108
Tribological behaviors Zn-Al-Cu alloy
effects of Mn content on the tribological behaviors of Zn—-27% Al-2% effects of Mn content on the tribological behaviors of Zn—-27% Al-2%
Cu alloy, 129 Cu alloy, 129