Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear 1995: Vol 185 Index

5 Pages·1995·1.3 MB·English

ae a A
ELSEVIER Wear 185 (1995) 239
Author Index of Volume 185
Alahelisten, A., 213 Gerardi, D.T., 111 Lei, T.C., 167 Smith, R.W., 93
Anderson, I.A., 23 Goto, K., 75 Li, S.Y., 67 Song, W.Q., 125
Liao, P., 1 Stachowiak, G.W., 225
Bai, M., 197 Lin, J.F., 131
Hamblin, M.G., 225
Bandyopadhyay, S., 125 Liu, W., 197 Terheci, M., 119
Harris, S.J., 203
Bantle, R., 151 Lugscheider, E., 93 Tomlinson, W.J., 59
Hashimoto, H., 183
Trivedi, H.K., 111
Bransden, A.S., 59
Hensler, J.H., 119
Tsujikawa, M., 203
Malkin, S., 173
Hills, D.A., 235
Carton, J.-F., 47 Hokkirigawa, K., 9 Manory, R.R., 119 Valencic, A., 93
Celis, J.P., 93 Hooke, C.J., 1 Matthews, A., 151 Vannes, A.-B., 47
Chen, Y.K., 1 McColl, I.R., 203
Vincent, L., 35, 47
Chen, Y.-M., 83 Mouritz, A.P., 125
Voevodin, A.A., 151
Chen, Y.N., 131 Ivanyk, E., 159 Moustafa, S.F., 189
Ives, L.K., 83
Collins, I.F., 23 Wan, Y., 197
Nakayama, K., 183 Wang, X., 197
Dally, J.W., 83 James Li, C., 67 Nowell, D., 235 Waterhouse, R.B., 203
De Bonte, M., 93 Jiang, Z.-L., 17
Xue, Q., 197
Ding, Y., 141 Jones, R., 141 Ouyang, J.H., 167
Yang, Y.-Y., 17
Economou, S., 93 Pei, Y.T., 167
Kapsa, Ph., 35 Yang, Z.-G., 17
Puthanangady, T.K., 173
Kitsunai, H., 9 Yevtushenko, A., 159
Fang, H.-S., 17 Krauklis, P., 125
Fellows, L.J., 235 Kuhnell, B., 141 Roos, J.R., 93 Zheng, Y.-K., 17
Fouvry, S., 35 Kukureka, S.N., 1 Rosado, L., 111 Zhou, Y., 167
Elsevier Science S.A.

34# iFa as
SEVIER
Wear 185 (1995) 241-243
Subject Index of Volume 185
Abrasion Ceramics
experimental investigation of the superfinishing process, 173 the relationship between the change in stress intensity factor
abrasion of hot flame-deposited diamond coatings, 213 and wear rate at elevated temperatures for ceramics, 131
Abrasive wear triboemission of charged particles and photons from wearing
the effect of thermal ageing on the abrasive wear behaviour of ceramic surfaces in various hydrocarbon gases, 183
age-hardening 2014 AI/SiC and 6061 AlI/SiC composites, Charged particle
125 triboemission of charged particles and photons from wearing
a multi-scale measure of particle abrasivity, 225 ceramic surfaces in various hydrocarbon gases, 183
Abrasivity Coatings
a multi-scale measure of particle abrasivity, 225 basis of a coating choice methodology in fretting, 47
Acetal tribological behaviour of laser-clad TiC, composite coating,
the wear mechanisms of acetal in unlubricated rolling—sliding 167
contact, 1 Composites
Acoustic emissions the effect of thermal ageing on the abrasive wear behaviour of
acoustic emission analysis for bearing condition monitoring, 67 age-hardening 2014 AI/SiC and 6061 Al/SiC composites,
Adhesion 125
the friction and wear of automotive grey cast iron under dry tribological behaviour of laser-clad TiC, composite coating,
sliding conditions. Part 2. Friction and wear— particle 167
generation mechanisms and their progress with time, 119 Contact mechanics
Age hardening plane strain stress distributions in discrete and blended coated
the effect of thermal ageing on the abrasive wear behaviour of solids under normal and sliding contact, 23
age-hardening 2014 AIl/SiC and 6061 AIl/SiC composites, Contact spot
125 determination of heat and thermal distortion in braking
Al-22%Si alloy systems, 159
wear and wear mechanisms of Al—22%Si/Al,O3, composite, 189 Contact stress
Alloying contact stresses in a moderately thin strip (with particular
cavitation erosion of laser surface alloyed coatings on reference to fretting experiments), 235
Al-12%Si, 59 Copper
Alumina fibers numerical simulation of sliding contact over a half-plane, 83
wear and wear mechanisms of Al—-22%Si/Al,O3, composite, 189 Crack
Aluminium the friction and wear of automotive grey cast iron under dry
cavitation erosion of laser surface alloyed coatings on sliding conditions. Part 2. Friction and we—ap arrtic le
Al-12%Si, 59 generation mechanisms and their progress with time, 119
the effect of thermal ageing on the abrasive wear behaviour of Crest
age-hardening 2014 AI/SiC and 6061 AI/SiC composites, the friction and wear of automotive grey cast iron under dry
125 sliding conditions. Part 2. Friction and we—ap arrtic le
wear mechanism of SiC whisker-reinforced 2024 aluminum generation mechanisms and their progress with time, 119
alloy matrix composites in oscillating sliding wear tests, 197
Delamination
Bearing the failure models induced by white layers during impact
acoustic emission analysis for bearing condition monitoring, 67 wear, 17
Boundary Lubrication the friction and wear of automotive grey cast iron under dry
evaluation of fatigue and wear characteristics of M50 steel sliding conditions. Part 2. Friction and wear— particle
using synthetic ester turbine engine lubricants—Part 1, 111 generation mechanisms and their progress with time, 119
Brake elements Diamond coating
determination of heat and thermal distortion in braking abrasion of hot flame-deposited diamond coatings, 213
systems, 159 Diamond-like carbon
dynamic impact wear of TiC,N, and Ti-DLC composite
Carbide reinforced coatings coatings, 151
tribological behavior of TiC/TaC-reinforced cermet plasma Dry sliding wear
sprayed coatings tested against sapphire, 93 tribological behavior of TiC/TaC-reinforced cermet plasma
Cavitation sprayed coatings tested against sapphire, 93
cavitation erosion of laser surface alloyed coatings on Dry wear
Al-12%Si, 59 wear and wear mechanisms of Al-22%Si/Al,03, composite, 189
Elsevier Science S.A.
242 Subject Index of Volume 185
Elastic—plastic deformation Laser
numerical simulation of sliding contact over a half-plane, 83 cavitation erosion of laser surface alloyed coatings on
Electrons Al-12%Si, 59
triboemission of charged particles and photons from wearing Layered systems
ceramic surfaces in various hydrocarbon gases, 183 plane strain stress distributions in discrete and blended coated
EPIC II solids under normal and sliding contact, 23
numerical simulation of sliding contact over a half-plane, 83 Ligament collapse
Erosion numerical analysis of subsurface crack failure beneath the
cavitation erosion of laser surface alloyed coatings on pitch line of a gear tooth during engagement, 141
Al-12%Si, 59 Localized defects
acoustic emission analysis for bearing condition monitoring, 67
Lubrication
Failure models
lubricated fretting wear of a high-strength eutectoid steel rope
the failure models induced by white layers during impact
wire, 203
wear, 17
Fatigue
abrasion of hot flame-deposited diamond coatings, 213 Magnetron sputtering
Finishing dynamic impact wear of TiC,N, and Ti-DLC composite
experimental investigation of the superfinishing process, 173 coatings, 151
Finite element analysis Metal matrix composite
numerical simulation of sliding contact over a half-plane, 83 wear and wear mechanisms of Al-22%Si/Al,O3, composite, 189
Finite element modelling wear mechanism of SiC whisker-reinforced 2024 aluminum
plane strain stress distributions in discrete and blended coated alloy matrix composites in oscillating sliding wear tests, 197
solids under normal and sliding contact, 23 Microscopic observation
Fracture toughness transitions of microscopic wear mode of silicon carbide
the relationship between the change in stress intensity factor coatings by chemical vapor deposition during repeated slid-
and wear rate at elevated temperatures for ceramics, 131 ing observed in a scanning electron microscope tribosystem,
Fretting 9
analysis of sliding behaviour for fretting loadings: determina- Monitoring
tion of transition criteria, 35 acoustic emission analysis for bearing condition monitoring, 67
basis of a coating choice methodology in fretting, 47
Fretting fatigue
Nitriding
contact stresses in a moderately thin strip (with particular
basis of a coating choice methodology in fretting, 47
reference to fretting experiments), 235
Fretting wear
Partial slip
lubricated fretting wear of a high-strength eutectoid steel rope
analysis of sliding behaviour for fretting loadings: determina-
wire, 203
tion of transition criteria, 35
Particles
Gears
a multi-scale measure of particle abrasivity, 225
the wear mechanisms of acetal in unlubricated rolling—sliding
Pattern recognition analysis
contact, 1 acoustic emission analysis for bearing condition monitoring, 67
Gear teeth
Pin-on-disk testing
numerical analysis of subsurface crack failure beneath the
the influence of surface induced voltage on the wear mode of
pitch line of a gear tooth during engagement, 141
stainless steel, 75
Groove
tribological behavior of TiC/TaC-reinforced cermet plasma
the friction and wear of automotive grey cast iron under dry
sprayed coatings tested against sapphire, 93
sliding conditions. Part 2. Friction and wear— particle
Pitting
generation mechanisms and their progress with time, 119
numerical analysis of subsurface crack failure beneath the
Gross slip
pitch line of a gear tooth during engagement, 141
analysis of sliding behaviour for fretting loadings: determina-
Plasma spray
tion of transition criteria, 35 basis of a coating choice methodology in fretting, 47
Plasma sprayed coatings
High strength steel tribological behavior of TiC/TaC-reinforced cermet plasma
lubricated fretting wear of a high-strength eutectoid steel rope sprayed coatings tested against sapphire, 93
wire, 203 Polymers
Hydrocarbon gas the wear mechanisms of acetal in unlubricated rolling—sliding
triboemission of charged particles and photons from wearing contact, 1
ceramic surfaces in various hydrocarbon gases, 183
Rolling contact fatigue
Impact wear evaluation of fatigue and wear characteristics of MSO steel
the failure models induced by white layers during impact using synthetic ester turbine engine lubricants—Part 1, 111
wear, 17 Rolling-sliding
dynamic impact wear of TiC,N, and Ti-DLC composite the wear mechanisms of acetal in unlubricated rolling—sliding
coatings, 151 contact, 1
Ions Rope wire
triboemission of charged particles and photons from wearing lubricated fretting wear of a high-strength eutectoid steel rope
ceramic surfaces in various hydrocarbon gases, 183 wire, 203
Subject Index of Volume 185
Scanning electron microscope Surface induced voltage
transitions of microscopic wear mode of silicon carbide the influence of surface induced voltage on the wear mode of
coatings by chemical vapor deposition during repeated slid- stainless steel, 75
ing observed in a scanning electron microscope tribosystem, Surfaces
9 cavitation erosion of laser surface alloyed coatings on
Seizure Al-12%Si, 59
the influence of surface induced voltage on the wear mode of
Temperature and thermal distortion
stainless steel, 75
determination of heat and thermal distortion in braking
Shakedown
systems, 159
plane strain stress distributions in discrete and blended coated
Thermal ageing
solids under normal and sliding contact, 23
the effect of thermal ageing on the abrasive wear behaviour of
Shape
age-hardening 2014 AI/SiC and 6061 AI/SiC composites,
a multi-scale measure of particle abrasivity, 225
125
Silicon carbide
Third Body
the effect of thermal ageing on the abrasive wear behaviour of
the friction and wear of automotive grey cast iron under dry
age-hardening 2014 Al/SiC and 6061 AlI/SiC composites,
sliding conditions. Part 2. Friction and wear—particle
125 generation mechanisms and their progress with time, 119
Silicon nitride (Ti,Ta)C
the relationship between the change in stress intensity factor tribological behavior of TiC/TaC-reinforced cermet plasma
and wear rate at elevated temperatures for ceramics, 131 sprayed coatings tested against sapphire, 93
Sliding transition criteria Titanium carbide
analysis of sliding behaviour for fretting loadings: determina- tribological behaviour of laser-clad TiC, composite coating,
tion of transition criteria, 35 167
Sliding wear Titanium carbonitride
numerical simulation of sliding contact over a half-plane, 83 dynamic impact wear of TiC,N, and Ti-DLC composite coat-
Spalling ings, 151
Toughness
the failure models induced by white layers during impact
the friction and wear of automotive grey cast iron under dry
wear, 17
sliding conditions. Part 2. Friction and wear-—particle
numerical analysis of subsurface crack failure beneath the
generation mechanisms and their progress with time, 119
pitch line of a gear tooth during engagement, 141
Triboemission
Specific film thickness
triboemission of charged particles and photons from wearing
evaluation of fatigue and wear characteristics of MSO steel
ceramic surfaces in various hydrocarbon gases, 183
using synthetic ester turbine engine lubricants—Part 1,
Tribological behaviour
111
tribological behaviour of laser-clad TiC, composite coating,
Specimens-fretting tests
167
Contact stresses in a moderately thin strip (with particular Tribology
reference to fretting experiments), 235 basis of a coating choice methodology in fretting, 47
Stainless steel
the influence of surface induced voltage on the wear mode of Wear
stainless steel, 75 the wear mechanisms of acetal in unlubricated rolling—sliding
Steel contact, 1
the failure models induced by white layers during impact wear mechanism of SiC whisker-reinforced 2024 aluminum al-
wear, 17 loy matrix composites in oscillating sliding wear tests, 197
basis of a coating choice methodology in fretting, 47 Wear mechanisms
wear and wear mechanisms of Al-22%Si/A1,O3; composite, 189
Stress intensity factor
Wear modes
the relationship between the change in stress intensity factor
transitions of microscopic wear mode of silicon carbide
and wear rate at elevated temperatures for ceramics,
coatings by chemical vapor deposition during repeated slid-
131
ing observed in a scanning electron microscope tribosystem,
numerical analysis of subsurface crack failure beneath the
9
pitch line of a gear tooth during engagement, 141
Wear rate
Strips—contact stress
the relationship between the change in stress intensity factor
contact stresses in a moderately thin strip (with particular
and wear rate at elevated temperatures for ceramics, 131
reference to fretting experiments), 235
Wear resistance
Subsurface cracks
plane strain stress distributions in discrete and blended coated
numerical analysis of subsurface crack failure beneath the
solids under normal and sliding contact, 23
pitch line of a gear tooth during engagement, 141 Wear volume
Superfinishing evaluation of fatigue and wear characteristics of MSO steel
experimental investigation of the superfinishing process, 173 using synthetic ester turbine engine lubricants—Part 1, 111
Surface coatings White layer
plane strain stress distributions in discrete and blended coated the failure models induced by white layers during impact
solids under normal and sliding contact, 23 wear, 17