Table Of Content

By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code § 552(a) and Part 1 of the Code of Regulations § 51 the attached document has been duly INCORPORATED BY REFERENCE and shall be considered legally binding upon all citizens and residents of the United States of America. HEED THIS NOTICE: Criminal penalties may apply for noncompliance. e Document Name: CFR Section(s): Standards Body: Official Incorporator: THE EXECUTIVE DIRECTOR OFFICE OF THE FEDERAL REGISTER WASHINGTON, D.C. 127-96 Factory-Built Fireplaces - with Revisions through November 1999 249 250 NOVEMBER9,1999- UL127 tr1 Underwriters Laboratories Inc. (UL) 333 Pfingsten Road Northbrook, IL 60062-2096 UL Standard for Safety for Factory-Built Fireplaces, UL 127 Seventh Edition, Dated May 16, 1996 Revisions: This Standard contains revisions through and including November 9, 1999. ULis in the process ofconverting its Standards for Safetytothe Standard Generalized Markup Language (SGML), and implementing an SGML compliant document management and publishing system. SGML an international standard(ISO8879-1986) -isa descriptive markup languagethatdescribesa document's structure and purpose, rather than its physical appearance on a page. Significant benefits that will result from UL'suseof SGMLandthese newsystems includeincreased productivity, reduced turnaround times, and data and information consistency, reusability, shareability, and portability. However, the fonts, pagination, and general formatting of UL's new electronic publishing system differ from that of UL's previous publishing system. Consequently, when revision pages are issued for a Standard with the new publishing system, these differences may.result in the printing of pages on which no requirements have been.changed - these additional pages result from relocation oftext due to repagination and refonnatting of the Standard with the new publishing system. Text that has been changed in any manner is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication orthe date on which the changed requirement becomes effective. The new and revised requirements are substantially in accordance with UL's Bulletin(s) on this subject dated August 2, 1999. The bulletin(s) is now obsolete and may be discarded. The revisions dated November9, 1999also reorderthe contents ofthe Performance and Manufacturing and Production Tests Sections in the Blower Assembly requirements. The revisions dated January 13, 1999 include a reprinted title page (page1) for this Standard. The revisions dated January 26, 1998 were issued to correct typographical errors and to change references to UL 547, Standard for Thermal Protectors for Motors, to UL2111, Standard for Overheating Protection for Motors. UL 547 has been withdrawn and replaced by UL 2111. As indicated on the title page (page 1), this UL Standard for Safety is an American National Standard. Attention is directed tothe note on the title page of this Standard outlining the procedures to be followed to retain the approved text of this ANSIIUL Standard. The master for this Standard at UL's Northbrook Office is the official document insofar as it relates to a ULservice and the compliance of aproductwith respecttothe requirements forthat product and service, or ifthere are questions regarding the accuracy of this Standard. UL'sStandards for Safetyare copyrighted byUL. Neitheraprintedcopy ofa Standard, northe distribution diskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should be altered in any way. All of UL's Standards and all copyrightt. ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. 251 tr2 NOVEMBER9,1999- UL127 Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL provides this Standard "as is" without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or fitness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall UL's liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. UL will attempt to answer support requests concerning WordPerfect, Envoy, and Standards-on-Diskette. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request. ULsupports a Standards~on-Diskette onlyif it is used underthe conditions and operating systemsforwhich itisintended. UL'ssupportpolicies maychange from time-to-time without notification. UL reserves the right to change the format, presentation, file types and formats, delivery methods and formats, and the like of both its printed and electronic Standards without prior notice. Standards-on-Diskette purchasers agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorney's fees) resulting from any error or deviation introduced while purchaser is storing a Standard-on-Diskette on the purchaser's computer system. If a single-user version Standards-on-Diskette was purchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN file-server or the permanent storage deviceof amultiple-usercomputerin such amannerthatthis Standard mayonlybe accessed byone user at a time and for which there is no possibility of multiple concurrent access. The original distribution diskette should be stored in a safe place. Ifa multiple-userversion Standards-on-Diskette was purchased, one copy ofthe Standard may be stored on a single LAN file-server, or on the permanentstorage device of a multiple-usercomputer. The number of concurrent users shall not exceed the number of users authorized for the Standards-an-Diskette v.ersion. The original distribution diskette should be stored in a safe place. Standards-an-Diskette are intended for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version ofa Standards-an-Diskette. Only one copy of the Standard may be printed for each authorized user of a multiple-user version of a Standards-an-Diskette. An employee of an organization purchasing a Standard-on-Diskette can make a copy ofthe page orpages being viewed fortheirown fair andlor practical internal use. Because of differences in the computer/software/printer setup used by UL and those of Standards-an-Diskette purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view orthe printed Standard. The requirements inthisStandard arenowineffect, exceptforthose paragraphs, sections, tables, figures, andlor other elements ofthe Standard having future effective dates as indicated in the note follOWing the affected item. The priortextfor requirements that have been revised and that have afuture effective date are located after the Standard, and are preceded by a "SUPERSEDED REQUIREMENTS" notice. 252 NOVEMBER9,1999- UL127 tr3 New product submittals made prior to a specified future effective date will be judged under all of the requirements in this Standard including those requirements with a specified future effective date, unless the applicantspecifically requests thatthe productbejudged underthe current requirements. However, if the applicant elects this option, it should be noted that compliance with all the requirements in this Standard will be required as a condition ofcontinued Listing, Classification and Follow-Up Services after the effective date, and understanding ofthis should be signified in writing. Copyright© 1999 Underwriters Laboratories Inc. 253 tr4 NOVEMBER 9,1999 - UL 127 This Standard consists of pages dated as shown in the following checklist: Page Date 1-2 January 13, 1999 2A-68 November 9, 1999 7 May 16, 1996 8 January 13, 1999 8A-88 January 26, 1998 9-10 May 16,1996 11-14 January 13, 1999 14A-14B January 26, 1998 15 May 16, 1996 16-188 January 13, 1999 19-20 May 16, 1996 21 August 25, 1997 22-228 January 26, 1998 23 August 25, 1997 24-26 May 16, 1996 27 January 26, 1998 28 August 25, 1997 28A-288 January 26, 1998 29 May 16, 1996 30-32 January 13, 1999 33-35 May 16,1996 36-38 ' January 26, 1998 39-48 May 16,1996 49-52 January 26, 1998 53-54 January 13, 1999 55-568 January 26, 1998 57 May 16, 1996 58-59 January 26, 1998 60-65 May 16, 1996 66-67 January 26, 1998 68-69 May 16,1996 70-708 January 26, 1998 71-740 November 9,1999 75-84 May 16,1996 85-868 January 13, 1999 87-88A January 26, 1998 888 February 24, 1997 89-908 January 13, 1999 91-93 May 16, 1996 94-97 January 26, 1998 98 May 16, 1996 99 November 9,1999 100 May 16,1996 101-102 ......................................................................January 13, 1999 102A November 9,1999 1028-103 January 13,1999 104-1048 January 26, 1998 105-106 May 16,1996 107-109 January 13, 1999 254 NOVEMBER9,1999- UL127 tr5 110 May 16, 1996 111 August 25, 1997 112 May 16, 1996 A1-A2 January 13, 1999 SR1 November 9, 1999 SR2-SR2B January 13, 1999 SR3-SR4 June 15, 1998 255 tr6 NOVEMBER9,1999- UL127 No Text on This Page 256