Table Of Content

ETSI TS 134 122 V3.6.0 (2001-12) Technical Specification Universal Mobile Telecommunications System (UMTS); Terminal Conformance Specification; Radio Transmission and Reception (TDD) (3GPP TS 34.122 version 3.6.0 Release 1999) 3GPP TS 34.122 version 3.6.0 Release 1999 1 ETSI TS 134 122 V3.6.0 (2001-12) Reference RTS/TSGT-0134122UR7 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [email protected] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 2001. All rights reserved. ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 2 ETSI TS 134 122 V3.6.0 (2001-12) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under www.etsi.org/key . ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 3 ETSI TS 134 122 V3.6.0 (2001-12) Contents Intellectual Property Rights................................................................................................................................2 Foreword.............................................................................................................................................................2 Foreword.............................................................................................................................................................9 1 Scope......................................................................................................................................................10 2 References..............................................................................................................................................10 3 Definitions, abbreviations and equations...............................................................................................10 3.1 Definitions........................................................................................................................................................10 3.2 Abbreviations...................................................................................................................................................11 3.3 Equations..........................................................................................................................................................11 4 Frequency bands and channel arrangement............................................................................................11 4.1 General.............................................................................................................................................................11 4.2 Frequency bands...............................................................................................................................................11 4.3 TX–RX frequency separation...........................................................................................................................12 4.4 Channel arrangement........................................................................................................................................12 4.4.1 Channel spacing..........................................................................................................................................12 4.4.2 Channel raster.............................................................................................................................................12 4.4.3 Channel number..........................................................................................................................................12 5 Transmitter Characteristics.....................................................................................................................12 5.1 General.............................................................................................................................................................12 5.2 User Equipment maximum output power.........................................................................................................13 5.2.1 Definition and applicability........................................................................................................................13 5.2.2 Minimum Requirements.............................................................................................................................13 5.2.3 Test purpose................................................................................................................................................13 5.2.4 Method of test.............................................................................................................................................14 5.2.4.1 Initial conditions...................................................................................................................................14 5.2.4.2 Procedure..............................................................................................................................................14 5.2.5 Test Requirements......................................................................................................................................14 5.3 UE frequency stability......................................................................................................................................15 5.3.1 Definition and applicability........................................................................................................................15 5.3.2 Minimum Requirements.............................................................................................................................15 5.3.3 Test purpose................................................................................................................................................15 5.3.4 Method of test.............................................................................................................................................15 5.3.4.1 Initial conditions...................................................................................................................................15 5.3.4.2 Procedure..............................................................................................................................................16 5.3.5 Test Requirements......................................................................................................................................16 5.4 Output Power Dynamics..................................................................................................................................16 5.4.1 Uplink power control..................................................................................................................................16 5.4.1.1 Initial accuracy......................................................................................................................................16 5.4.1.1.1 Definition and applicability.............................................................................................................16 5.4.1.1.2 Minimum requirements...................................................................................................................16 5.4.1.1.3 Test purpose....................................................................................................................................16 5.4.1.1.4 Method of test..................................................................................................................................17 5.4.1.1.4.1 Initial conditions........................................................................................................................17 5.4.1.1.4.2 Procedure...................................................................................................................................17 5.4.1.1.5 Test requirements............................................................................................................................17 5.4.1.2 Differential accuracy, controlled input..................................................................................................18 5.4.1.2.1 Definition and applicability.............................................................................................................18 5.4.1.2.2 Minimum requirements...................................................................................................................18 5.4.1.2.3 Test purpose....................................................................................................................................18 5.4.1.2.4 Method of test..................................................................................................................................18 5.4.1.2.4.1 Initial conditions........................................................................................................................18 5.4.1.2.4.2 Procedure...................................................................................................................................19 5.4.1.2.5 Test requirements............................................................................................................................19 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 4 ETSI TS 134 122 V3.6.0 (2001-12) 5.4.2 Minimum output power..............................................................................................................................20 5.4.2.1 Definition and applicability...................................................................................................................20 5.4.2.2 Minimum Requirements........................................................................................................................20 5.4.2.3 Test purpose..........................................................................................................................................20 5.4.2.4 Method of test.......................................................................................................................................20 5.4.2.4.1 Initial conditions..............................................................................................................................20 5.4.2.4.2 Procedure.........................................................................................................................................20 5.4.2.5 Test requirements..................................................................................................................................20 5.4.3 Transmit OFF power...................................................................................................................................20 5.4.3.1 Definition and applicability...................................................................................................................20 5.4.3.2 Minimum Requirements........................................................................................................................21 5.4.3.3 Test purpose..........................................................................................................................................21 5.4.3.4 Method of test.......................................................................................................................................21 5.4.3.5 Test requirements..................................................................................................................................21 5.4.4 Transmit ON/OFF Time mask....................................................................................................................21 5.4.4.1 Definition and applicability...................................................................................................................21 5.4.4.2 Minimum requirements.........................................................................................................................21 5.4.4.3 Test Purpose..........................................................................................................................................22 5.4.4.4 Method of test.......................................................................................................................................22 5.4.4.4.1 Initial conditions..............................................................................................................................22 5.4.4.4.2 Procedure.........................................................................................................................................22 5.4.4.5 Test requirements............................................................................................................................22 5.4.5 Out-of-synchronisation handling of output power......................................................................................23 5.4.5.1 Definition and applicability...................................................................................................................23 5.4.5.2 Minimum Requirement.........................................................................................................................23 5.4.5.3 Test purpose..........................................................................................................................................24 5.4.5.4 Method of test.......................................................................................................................................24 5.4.5.4.1 Initial conditions..............................................................................................................................24 5.4.5.4.2 Procedure.........................................................................................................................................25 5.4.5.5 Test Requirements.................................................................................................................................25 5.5 Output RF spectrum emissions.........................................................................................................................25 5.5.1 Occupied bandwidth...................................................................................................................................25 5.5.1.1 Definition and applicability...................................................................................................................25 5.5.1.2 Minimum Requirements........................................................................................................................25 5.5.1.3 Test purpose..........................................................................................................................................26 5.5.1.4 Method of test.......................................................................................................................................26 5.5.1.4.1 Initial conditions..............................................................................................................................26 5.5.1.4.2 Procedure.........................................................................................................................................26 5.5.1.5 Test requirements..................................................................................................................................26 5.5.2 Out of band emission..................................................................................................................................27 5.5.2.1 Spectrum emission mask.......................................................................................................................27 5.5.2.1.1 Definition and applicability.............................................................................................................27 5.5.2.1.2 Minimum Requirements..................................................................................................................27 5.5.2.1.3 Test purpose....................................................................................................................................27 5.5.2.1.4 Method of test..................................................................................................................................27 5.5.2.1.5 Test requirements............................................................................................................................28 5.5.2.2 Adjacent Channel Leakage power Ratio (ACLR).................................................................................28 5.5.2.2.1 Definition and applicability.............................................................................................................28 5.5.2.2.2 Minimum Requirements..................................................................................................................29 5.5.2.2.3 Test purpose....................................................................................................................................29 5.5.2.2.4 Method of test..................................................................................................................................29 5.5.2.2.5 Test requirements............................................................................................................................29 5.5.3 Spurious emissions.....................................................................................................................................30 5.5.3.1 Definition and applicability...................................................................................................................30 5.5.3.2 Minimum Requirements........................................................................................................................30 5.5.3.3 Test purpose..........................................................................................................................................30 5.5.3.4 Method of test.......................................................................................................................................31 5.5.3.4.1 Initial conditions..............................................................................................................................31 5.5.3.4.2 Procedure.........................................................................................................................................31 5.5.3.5 Test requirements..................................................................................................................................31 5.6 Transmit Intermodulation.................................................................................................................................31 5.6.1 Definition and applicability........................................................................................................................31 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 5 ETSI TS 134 122 V3.6.0 (2001-12) 5.6.2 Minimum Requirements.............................................................................................................................32 5.6.3 Test purpose................................................................................................................................................32 5.6.4 Method of test.............................................................................................................................................32 5.6.4.1 Initial conditions...................................................................................................................................32 5.6.4.2 Procedure..............................................................................................................................................32 5.6.5 Test requirements........................................................................................................................................32 5.7 Transmit Modulation........................................................................................................................................33 5.7.1 Error Vector Magnitude..............................................................................................................................33 5.7.1.1 Definition and applicability...................................................................................................................33 5.7.1.2 Minimum Requirements........................................................................................................................33 5.7.1.3 Test purpose..........................................................................................................................................33 5.7.1.4 Method of test.......................................................................................................................................33 5.7.1.4.1 Initial conditions..............................................................................................................................33 5.7.1.4.2 Procedure.........................................................................................................................................34 5.7.1.5 Test requirements..................................................................................................................................34 5.7.2 Peak code domain error..............................................................................................................................34 5.7.2.1 Definition and applicability...................................................................................................................34 5.7.2.2 Minimum Requirement.........................................................................................................................34 5.7.2.3 Test purpose..........................................................................................................................................34 5.7.2.4 Method of test.......................................................................................................................................34 5.7.2.4.1 Initial conditions..............................................................................................................................34 5.7.2.4.2 Procedure.........................................................................................................................................35 5.7.2.5 Test requirements..................................................................................................................................35 6 Receiver Characteristics.........................................................................................................................35 6.1 General.............................................................................................................................................................35 6.2 Reference sensitivity level................................................................................................................................36 6.2.1 Definition and applicability........................................................................................................................36 6.2.2 Minimum Requirements.............................................................................................................................36 6.2.3 Test purpose................................................................................................................................................36 6.2.4 Method of test.............................................................................................................................................36 6.2.4.1 Initial conditions...................................................................................................................................36 6.2.4.2 Procedure..............................................................................................................................................36 6.2.5 Test requirements........................................................................................................................................36 6.3 Maximum Input Level......................................................................................................................................37 6.3.1 Definition and applicability........................................................................................................................37 6.3.2 Minimum requirements...............................................................................................................................37 6.3.3 Test purpose................................................................................................................................................37 6.3.4 Method of test.............................................................................................................................................37 6.3.4.1 Initial conditions...................................................................................................................................37 6.3.4.2 Procedure..............................................................................................................................................38 6.3.5 Test requirements........................................................................................................................................38 6.4 Adjacent Channel Selectivity (ACS)................................................................................................................38 6.4.1 Definition and applicability........................................................................................................................38 6.4.2 Minimum Requirements.............................................................................................................................38 6.4.3 Test purpose................................................................................................................................................38 6.4.4 Method of test.............................................................................................................................................38 6.4.4.1 Initial conditions...................................................................................................................................38 6.4.4.2 Procedure..............................................................................................................................................39 6.4.5 Test Requirements......................................................................................................................................39 6.5 Blocking Characteristics...................................................................................................................................39 6.5.1 Definition and applicability........................................................................................................................39 6.5.2 Minimum Requirements.............................................................................................................................39 6.5.3 Test purpose................................................................................................................................................40 6.5.4 Method of test.............................................................................................................................................40 6.5.4.1 Initial conditions...................................................................................................................................40 6.5.4.2 Procedure..............................................................................................................................................41 6.5.5 Test requirements........................................................................................................................................41 6.6 Spurious Response...........................................................................................................................................42 6.6.1 Definition and applicability........................................................................................................................42 6.6.2 Minimum Requirements.............................................................................................................................42 6.6.3 Test purpose................................................................................................................................................42 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 6 ETSI TS 134 122 V3.6.0 (2001-12) 6.6.4 Method of test.............................................................................................................................................43 6.6.4.1 Initial conditions...................................................................................................................................43 6.6.4.2 Procedure..............................................................................................................................................43 6.6.5 Test requirements........................................................................................................................................43 6.7 Intermodulation Characteristics........................................................................................................................43 6.7.1 Definition and applicability........................................................................................................................43 6.7.2 Minimum Requirements.............................................................................................................................44 6.7.3 Test purpose................................................................................................................................................44 6.7.4 Method of test.............................................................................................................................................44 6.7.4.1 Initial conditions...................................................................................................................................44 6.7.4.2 Procedure..............................................................................................................................................44 6.7.5 Test requirements........................................................................................................................................45 6.8 Spurious Emissions..........................................................................................................................................45 6.8.1 Definition and applicability........................................................................................................................45 6.8.2 Minimum Requirements.............................................................................................................................45 6.8.3 Test purpose................................................................................................................................................45 6.8.4 Method of test.............................................................................................................................................46 6.8.4.1 Initial conditions...................................................................................................................................46 6.8.4.2 Procedure..............................................................................................................................................46 6.8.5 Test requirements........................................................................................................................................46 7 Performance Requirements....................................................................................................................47 7.1 General.............................................................................................................................................................47 7.1.2 Definition of Additive White Gaussian Noise (AWGN) Interferer............................................................47 7.2 Demodulation in static propagation conditions................................................................................................47 7.2.1 Demodulation of DCH................................................................................................................................47 7.2.1.1 Definition and applicability...................................................................................................................47 7.2.1.2 Minimum requirements.........................................................................................................................47 7.2.1.3 Test purpose..........................................................................................................................................48 7.2.1.4 Method of test.......................................................................................................................................48 7.2.1.4.1 Initial conditions..............................................................................................................................48 7.2.1.4.2 Procedure.........................................................................................................................................48 7.2.1.5 Test requirements..................................................................................................................................48 7.3 Demodulation of DCH in multipath fading conditions....................................................................................49 7.3.1 Multipath fading Case 1..............................................................................................................................49 7.3.1.1 Definition and applicability...................................................................................................................49 7.3.1.2 Minimum requirements.........................................................................................................................49 7.3.1.3 Test purpose..........................................................................................................................................49 7.3.1.4 Method of test.......................................................................................................................................49 7.3.1.4.1 Initial conditions..............................................................................................................................49 7.3.1.4.2 Procedure.........................................................................................................................................50 7.3.1.5 Test requirements..................................................................................................................................50 7.3.2 Multipath fading Case 2..............................................................................................................................50 7.3.2.1 Definition and applicability...................................................................................................................50 7.3.2.2 Minimum requirement..........................................................................................................................50 7.3.2.3 Test purpose..........................................................................................................................................51 7.3.2.4 Method of test.......................................................................................................................................51 7.3.2.4.1 Initial conditions..............................................................................................................................51 7.3.2.4.2 Procedure.........................................................................................................................................51 7.3.2.5 Test requirements..................................................................................................................................51 7.3.3 Multipath fading Case 3..............................................................................................................................51 7.3.3.1 Definition and applicability...................................................................................................................51 7.3.3.2 Minimum requirements.........................................................................................................................51 7.3.3.3 Test purpose..........................................................................................................................................52 7.3.3.4 Method of test.......................................................................................................................................52 7.3.3.4.1 Initial conditions..............................................................................................................................52 7.3.3.4.2 Procedure.........................................................................................................................................52 7.3.3.5 Test requirements............................................................................................................................53 7.4 Base station transmit diversity mode................................................................................................................53 7.4.1 Demodulation of BCH in Block STTD mode..................................................................................................53 7.5 Power control in downlink...............................................................................................................................53 7.5.1 Minimum requirements...............................................................................................................................53 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 7 ETSI TS 134 122 V3.6.0 (2001-12) 8 Requirements for Support of RRM........................................................................................................53 8.1 General.............................................................................................................................................................53 8.2 Idle Mode Tasks...............................................................................................................................................53 8.2.1 Introduction.................................................................................................................................................53 8.2.2 RF Cell Selection Scenario.........................................................................................................................54 8.2.2.1 Requirements for Cell Selection single carrier single cell case.............................................................54 8.2.2.2 Requirements for Cell Selection multicarrier carrier multi cell case....................................................54 8.2.3 RF Cell Re-Selection Scenario...................................................................................................................54 8.2.3.1 Requirements for Cell Re-Selection single carrier multi cell case........................................................54 8.2.4 PLMN Selection and Re-Selection Scenario..............................................................................................54 8.2.5 Location Registration Scenario...................................................................................................................54 8.3 RRC Connection mobility................................................................................................................................54 8.3.1 Handover....................................................................................................................................................54 8.3.1.1 Introduction...........................................................................................................................................54 8.3.1.2 Handover 3G to 3G...............................................................................................................................54 8.3.1.2.1 TDD/TDD Handover.......................................................................................................................54 8.3.1.2.2 TDD/FDD Handover.......................................................................................................................54 8.3.1.3 Handover 3G to 2G...............................................................................................................................54 8.3.1.3.1 Handover to GSM............................................................................................................................54 8.3.2 Radio Link Management............................................................................................................................54 8.3.2.1 Link adaptation.....................................................................................................................................54 8.3.3 Cell Update.................................................................................................................................................55 8.3.4 URA Update...............................................................................................................................................55 8.4 RRC Connection Control.................................................................................................................................55 8.4.1 Radio Access Bearer Control......................................................................................................................55 8.5 Dynamic Channel Allocation...........................................................................................................................55 8.6 Timing characteristics......................................................................................................................................55 8.6.1 Timing Advance (TA) Requirements.........................................................................................................55 8.7 Measurements Performance Requirements......................................................................................................55 8.7.1 Measurements Performance for UE............................................................................................................55 Annex A (informative): Connection Diagrams....................................................................................56 Annex B (normative): Global In-Channel TX-Test..........................................................................60 B.1 General.............................................................................................................................................................60 B.2 Definition of the process..................................................................................................................................60 B.2.1 Basic principle............................................................................................................................................60 B.2.2 Output signal of the TX under test..............................................................................................................60 B.2.3 Reference signal..........................................................................................................................................60 B.2.4 void.............................................................................................................................................................61 B.2.5 Classification of measurement results.........................................................................................................61 B.2.6 Process definition to achieve results of type “deviation”............................................................................61 B.2.7 Process definition to achieve results of type "residual"..............................................................................62 B.2.7.1 Error Vector Magnitude (EVM)............................................................................................................62 B.2.7.2 Peak Code Domain Error (PCDE)........................................................................................................62 B.3 Notes................................................................................................................................................................63 Annex C (normative): Measurement channels..................................................................................65 C.1 General.............................................................................................................................................................65 C.2 UL Reference measurement channels..............................................................................................................66 C.2.1 UL reference measurement channel (12.2 kbps).........................................................................................66 C.2.2 UL multi code reference measurement channel (12.2 kbps).......................................................................67 C.2.3 UL reference measurement channel (64 kbps)............................................................................................68 C.2.4 UL reference measurement channel (144 kbps)..........................................................................................69 C.2.5 UL reference measurement channel (384 kbps)..........................................................................................70 C.3 DL Reference measurement channels..............................................................................................................71 C.3.1 DL reference measurement channel (12.2 kbps).........................................................................................71 C.3.2 DL reference measurement channel (64 kbps)............................................................................................72 C.3.3 DL reference measurement channel (144 kbps)..........................................................................................73 C.3.4 DL reference measurement channel (384 kbps)..........................................................................................74 C.3.5 BCH reference measurement channel.........................................................................................................75 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 8 ETSI TS 134 122 V3.6.0 (2001-12) Annex D (normative): Propagation conditions..................................................................................76 D.1 Test Environments............................................................................................................................................76 D.2 Propagation Conditions....................................................................................................................................76 D.2.1 Static propagation condition.......................................................................................................................76 D.2.2 Multi-path fading propagation conditions...................................................................................................76 Annex E (normative): Common RF test conditions..........................................................................77 E.1 General.............................................................................................................................................................77 E.2 Connection Set-up............................................................................................................................................77 E.3 During connection............................................................................................................................................77 E.3.1 Measurement of Tx Characteristics............................................................................................................77 E.3.2 Measurement of Rx Characteristics............................................................................................................78 E.3.3 Measurement of Performance requirements...............................................................................................78 Annex F (normative): General test conditions and declarations.....................................................79 F.1 Acceptable uncertainty of Test System............................................................................................................79 F.1.1 Measurement of test environments.............................................................................................................79 F.1.2 Measurement of transmitter........................................................................................................................80 F.1.3 Measurement of receiver............................................................................................................................81 F.1.4 Performance requirement............................................................................................................................81 F.1.5 Requirements for support of RRM.............................................................................................................81 F.2 Test Tolerances (This clause is informative)....................................................................................................81 F.2.1 Transmitter..................................................................................................................................................82 F.2.2 Receiver......................................................................................................................................................82 F.2.3 Performance requirements..........................................................................................................................82 F.2.4 Requirements for support of RRM.............................................................................................................83 F.3 Interpretation of measurement results..............................................................................................................83 F.4 Derivation of Test Requirements (This clause is informative).........................................................................83 F.5 Acceptable uncertainty of Test Equipment (This clause is informative)..........................................................87 F.5.1 Transmitter measurements..........................................................................................................................87 F.5.2 Receiver measurements..............................................................................................................................87 F.5.3 Performance measurements........................................................................................................................87 F.6 General rules for statistical testing...................................................................................................................88 F.6.1 Statistical testing of receiver BER/BLER performance..............................................................................88 F.6.1.1 Error Definition.....................................................................................................................................88 F.6.1.2 Test Method..........................................................................................................................................88 F.6.1.3 Test Criteria...........................................................................................................................................88 F.6.1.4 Calculation assumptions........................................................................................................................88 F.6.1.5 Definition of good pass fail decision.....................................................................................................89 F.6.1.6 Good balance between testtime and statistical significance..................................................................89 F.6.1.7 Pass fail decision rules..........................................................................................................................90 F.6.1.8 Test conditions for BER,BLER tests.....................................................................................................91 F.6.1.9 Practical Use (informative)...................................................................................................................92 Annex G (normative): Environmental conditions.............................................................................95 G.1 General.............................................................................................................................................................95 G.2 Environmental requirements............................................................................................................................95 G.2.1 Temperature................................................................................................................................................95 G.2.2 Voltage........................................................................................................................................................95 G.2.3 Vibration.....................................................................................................................................................96 G.2.4 Specified frequency range..........................................................................................................................96 Annex H (normative): Terminal Baseline and Service Implementation Capabilities (TDD)........97 H.1 Baseline Implementation Capabilities:.............................................................................................................97 H.2 Service Implementation Capabilities:...............................................................................................................97 Annex I (informative): Change history...............................................................................................98 History..............................................................................................................................................................99 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 9 ETSI TS 134 122 V3.6.0 (2001-12) Foreword rd This Technical Specification (TS) has been produced by the 3 Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI

ebook img

TS 134 122 - V3.6.0 - Universal Mobile Telecommunications System (UMTS); Terminal Conformance Specification; Radio Transmission and Reception (TDD) (3GPP TS 34.122 version 3.6.0 Release 1999) PDF

100 Pages·0.96 MB·English
by  European Telecommunications Standards Institute
#additional_collections #etsi_standards
Save to my drive
Quick download
Download
Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview TS 134 122 - V3.6.0 - Universal Mobile Telecommunications System (UMTS); Terminal Conformance Specification; Radio Transmission and Reception (TDD) (3GPP TS 34.122 version 3.6.0 Release 1999)

ETSI TS 134 122 V3.6.0 (2001-12) Technical Specification Universal Mobile Telecommunications System (UMTS); Terminal Conformance Specification; Radio Transmission and Reception (TDD) (3GPP TS 34.122 version 3.6.0 Release 1999) 3GPP TS 34.122 version 3.6.0 Release 1999 1 ETSI TS 134 122 V3.6.0 (2001-12) Reference RTS/TSGT-0134122UR7 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [email protected] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 2001. All rights reserved. ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 2 ETSI TS 134 122 V3.6.0 (2001-12) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under www.etsi.org/key . ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 3 ETSI TS 134 122 V3.6.0 (2001-12) Contents Intellectual Property Rights................................................................................................................................2 Foreword.............................................................................................................................................................2 Foreword.............................................................................................................................................................9 1 Scope......................................................................................................................................................10 2 References..............................................................................................................................................10 3 Definitions, abbreviations and equations...............................................................................................10 3.1 Definitions........................................................................................................................................................10 3.2 Abbreviations...................................................................................................................................................11 3.3 Equations..........................................................................................................................................................11 4 Frequency bands and channel arrangement............................................................................................11 4.1 General.............................................................................................................................................................11 4.2 Frequency bands...............................................................................................................................................11 4.3 TX–RX frequency separation...........................................................................................................................12 4.4 Channel arrangement........................................................................................................................................12 4.4.1 Channel spacing..........................................................................................................................................12 4.4.2 Channel raster.............................................................................................................................................12 4.4.3 Channel number..........................................................................................................................................12 5 Transmitter Characteristics.....................................................................................................................12 5.1 General.............................................................................................................................................................12 5.2 User Equipment maximum output power.........................................................................................................13 5.2.1 Definition and applicability........................................................................................................................13 5.2.2 Minimum Requirements.............................................................................................................................13 5.2.3 Test purpose................................................................................................................................................13 5.2.4 Method of test.............................................................................................................................................14 5.2.4.1 Initial conditions...................................................................................................................................14 5.2.4.2 Procedure..............................................................................................................................................14 5.2.5 Test Requirements......................................................................................................................................14 5.3 UE frequency stability......................................................................................................................................15 5.3.1 Definition and applicability........................................................................................................................15 5.3.2 Minimum Requirements.............................................................................................................................15 5.3.3 Test purpose................................................................................................................................................15 5.3.4 Method of test.............................................................................................................................................15 5.3.4.1 Initial conditions...................................................................................................................................15 5.3.4.2 Procedure..............................................................................................................................................16 5.3.5 Test Requirements......................................................................................................................................16 5.4 Output Power Dynamics..................................................................................................................................16 5.4.1 Uplink power control..................................................................................................................................16 5.4.1.1 Initial accuracy......................................................................................................................................16 5.4.1.1.1 Definition and applicability.............................................................................................................16 5.4.1.1.2 Minimum requirements...................................................................................................................16 5.4.1.1.3 Test purpose....................................................................................................................................16 5.4.1.1.4 Method of test..................................................................................................................................17 5.4.1.1.4.1 Initial conditions........................................................................................................................17 5.4.1.1.4.2 Procedure...................................................................................................................................17 5.4.1.1.5 Test requirements............................................................................................................................17 5.4.1.2 Differential accuracy, controlled input..................................................................................................18 5.4.1.2.1 Definition and applicability.............................................................................................................18 5.4.1.2.2 Minimum requirements...................................................................................................................18 5.4.1.2.3 Test purpose....................................................................................................................................18 5.4.1.2.4 Method of test..................................................................................................................................18 5.4.1.2.4.1 Initial conditions........................................................................................................................18 5.4.1.2.4.2 Procedure...................................................................................................................................19 5.4.1.2.5 Test requirements............................................................................................................................19 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 4 ETSI TS 134 122 V3.6.0 (2001-12) 5.4.2 Minimum output power..............................................................................................................................20 5.4.2.1 Definition and applicability...................................................................................................................20 5.4.2.2 Minimum Requirements........................................................................................................................20 5.4.2.3 Test purpose..........................................................................................................................................20 5.4.2.4 Method of test.......................................................................................................................................20 5.4.2.4.1 Initial conditions..............................................................................................................................20 5.4.2.4.2 Procedure.........................................................................................................................................20 5.4.2.5 Test requirements..................................................................................................................................20 5.4.3 Transmit OFF power...................................................................................................................................20 5.4.3.1 Definition and applicability...................................................................................................................20 5.4.3.2 Minimum Requirements........................................................................................................................21 5.4.3.3 Test purpose..........................................................................................................................................21 5.4.3.4 Method of test.......................................................................................................................................21 5.4.3.5 Test requirements..................................................................................................................................21 5.4.4 Transmit ON/OFF Time mask....................................................................................................................21 5.4.4.1 Definition and applicability...................................................................................................................21 5.4.4.2 Minimum requirements.........................................................................................................................21 5.4.4.3 Test Purpose..........................................................................................................................................22 5.4.4.4 Method of test.......................................................................................................................................22 5.4.4.4.1 Initial conditions..............................................................................................................................22 5.4.4.4.2 Procedure.........................................................................................................................................22 5.4.4.5 Test requirements............................................................................................................................22 5.4.5 Out-of-synchronisation handling of output power......................................................................................23 5.4.5.1 Definition and applicability...................................................................................................................23 5.4.5.2 Minimum Requirement.........................................................................................................................23 5.4.5.3 Test purpose..........................................................................................................................................24 5.4.5.4 Method of test.......................................................................................................................................24 5.4.5.4.1 Initial conditions..............................................................................................................................24 5.4.5.4.2 Procedure.........................................................................................................................................25 5.4.5.5 Test Requirements.................................................................................................................................25 5.5 Output RF spectrum emissions.........................................................................................................................25 5.5.1 Occupied bandwidth...................................................................................................................................25 5.5.1.1 Definition and applicability...................................................................................................................25 5.5.1.2 Minimum Requirements........................................................................................................................25 5.5.1.3 Test purpose..........................................................................................................................................26 5.5.1.4 Method of test.......................................................................................................................................26 5.5.1.4.1 Initial conditions..............................................................................................................................26 5.5.1.4.2 Procedure.........................................................................................................................................26 5.5.1.5 Test requirements..................................................................................................................................26 5.5.2 Out of band emission..................................................................................................................................27 5.5.2.1 Spectrum emission mask.......................................................................................................................27 5.5.2.1.1 Definition and applicability.............................................................................................................27 5.5.2.1.2 Minimum Requirements..................................................................................................................27 5.5.2.1.3 Test purpose....................................................................................................................................27 5.5.2.1.4 Method of test..................................................................................................................................27 5.5.2.1.5 Test requirements............................................................................................................................28 5.5.2.2 Adjacent Channel Leakage power Ratio (ACLR).................................................................................28 5.5.2.2.1 Definition and applicability.............................................................................................................28 5.5.2.2.2 Minimum Requirements..................................................................................................................29 5.5.2.2.3 Test purpose....................................................................................................................................29 5.5.2.2.4 Method of test..................................................................................................................................29 5.5.2.2.5 Test requirements............................................................................................................................29 5.5.3 Spurious emissions.....................................................................................................................................30 5.5.3.1 Definition and applicability...................................................................................................................30 5.5.3.2 Minimum Requirements........................................................................................................................30 5.5.3.3 Test purpose..........................................................................................................................................30 5.5.3.4 Method of test.......................................................................................................................................31 5.5.3.4.1 Initial conditions..............................................................................................................................31 5.5.3.4.2 Procedure.........................................................................................................................................31 5.5.3.5 Test requirements..................................................................................................................................31 5.6 Transmit Intermodulation.................................................................................................................................31 5.6.1 Definition and applicability........................................................................................................................31 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 5 ETSI TS 134 122 V3.6.0 (2001-12) 5.6.2 Minimum Requirements.............................................................................................................................32 5.6.3 Test purpose................................................................................................................................................32 5.6.4 Method of test.............................................................................................................................................32 5.6.4.1 Initial conditions...................................................................................................................................32 5.6.4.2 Procedure..............................................................................................................................................32 5.6.5 Test requirements........................................................................................................................................32 5.7 Transmit Modulation........................................................................................................................................33 5.7.1 Error Vector Magnitude..............................................................................................................................33 5.7.1.1 Definition and applicability...................................................................................................................33 5.7.1.2 Minimum Requirements........................................................................................................................33 5.7.1.3 Test purpose..........................................................................................................................................33 5.7.1.4 Method of test.......................................................................................................................................33 5.7.1.4.1 Initial conditions..............................................................................................................................33 5.7.1.4.2 Procedure.........................................................................................................................................34 5.7.1.5 Test requirements..................................................................................................................................34 5.7.2 Peak code domain error..............................................................................................................................34 5.7.2.1 Definition and applicability...................................................................................................................34 5.7.2.2 Minimum Requirement.........................................................................................................................34 5.7.2.3 Test purpose..........................................................................................................................................34 5.7.2.4 Method of test.......................................................................................................................................34 5.7.2.4.1 Initial conditions..............................................................................................................................34 5.7.2.4.2 Procedure.........................................................................................................................................35 5.7.2.5 Test requirements..................................................................................................................................35 6 Receiver Characteristics.........................................................................................................................35 6.1 General.............................................................................................................................................................35 6.2 Reference sensitivity level................................................................................................................................36 6.2.1 Definition and applicability........................................................................................................................36 6.2.2 Minimum Requirements.............................................................................................................................36 6.2.3 Test purpose................................................................................................................................................36 6.2.4 Method of test.............................................................................................................................................36 6.2.4.1 Initial conditions...................................................................................................................................36 6.2.4.2 Procedure..............................................................................................................................................36 6.2.5 Test requirements........................................................................................................................................36 6.3 Maximum Input Level......................................................................................................................................37 6.3.1 Definition and applicability........................................................................................................................37 6.3.2 Minimum requirements...............................................................................................................................37 6.3.3 Test purpose................................................................................................................................................37 6.3.4 Method of test.............................................................................................................................................37 6.3.4.1 Initial conditions...................................................................................................................................37 6.3.4.2 Procedure..............................................................................................................................................38 6.3.5 Test requirements........................................................................................................................................38 6.4 Adjacent Channel Selectivity (ACS)................................................................................................................38 6.4.1 Definition and applicability........................................................................................................................38 6.4.2 Minimum Requirements.............................................................................................................................38 6.4.3 Test purpose................................................................................................................................................38 6.4.4 Method of test.............................................................................................................................................38 6.4.4.1 Initial conditions...................................................................................................................................38 6.4.4.2 Procedure..............................................................................................................................................39 6.4.5 Test Requirements......................................................................................................................................39 6.5 Blocking Characteristics...................................................................................................................................39 6.5.1 Definition and applicability........................................................................................................................39 6.5.2 Minimum Requirements.............................................................................................................................39 6.5.3 Test purpose................................................................................................................................................40 6.5.4 Method of test.............................................................................................................................................40 6.5.4.1 Initial conditions...................................................................................................................................40 6.5.4.2 Procedure..............................................................................................................................................41 6.5.5 Test requirements........................................................................................................................................41 6.6 Spurious Response...........................................................................................................................................42 6.6.1 Definition and applicability........................................................................................................................42 6.6.2 Minimum Requirements.............................................................................................................................42 6.6.3 Test purpose................................................................................................................................................42 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 6 ETSI TS 134 122 V3.6.0 (2001-12) 6.6.4 Method of test.............................................................................................................................................43 6.6.4.1 Initial conditions...................................................................................................................................43 6.6.4.2 Procedure..............................................................................................................................................43 6.6.5 Test requirements........................................................................................................................................43 6.7 Intermodulation Characteristics........................................................................................................................43 6.7.1 Definition and applicability........................................................................................................................43 6.7.2 Minimum Requirements.............................................................................................................................44 6.7.3 Test purpose................................................................................................................................................44 6.7.4 Method of test.............................................................................................................................................44 6.7.4.1 Initial conditions...................................................................................................................................44 6.7.4.2 Procedure..............................................................................................................................................44 6.7.5 Test requirements........................................................................................................................................45 6.8 Spurious Emissions..........................................................................................................................................45 6.8.1 Definition and applicability........................................................................................................................45 6.8.2 Minimum Requirements.............................................................................................................................45 6.8.3 Test purpose................................................................................................................................................45 6.8.4 Method of test.............................................................................................................................................46 6.8.4.1 Initial conditions...................................................................................................................................46 6.8.4.2 Procedure..............................................................................................................................................46 6.8.5 Test requirements........................................................................................................................................46 7 Performance Requirements....................................................................................................................47 7.1 General.............................................................................................................................................................47 7.1.2 Definition of Additive White Gaussian Noise (AWGN) Interferer............................................................47 7.2 Demodulation in static propagation conditions................................................................................................47 7.2.1 Demodulation of DCH................................................................................................................................47 7.2.1.1 Definition and applicability...................................................................................................................47 7.2.1.2 Minimum requirements.........................................................................................................................47 7.2.1.3 Test purpose..........................................................................................................................................48 7.2.1.4 Method of test.......................................................................................................................................48 7.2.1.4.1 Initial conditions..............................................................................................................................48 7.2.1.4.2 Procedure.........................................................................................................................................48 7.2.1.5 Test requirements..................................................................................................................................48 7.3 Demodulation of DCH in multipath fading conditions....................................................................................49 7.3.1 Multipath fading Case 1..............................................................................................................................49 7.3.1.1 Definition and applicability...................................................................................................................49 7.3.1.2 Minimum requirements.........................................................................................................................49 7.3.1.3 Test purpose..........................................................................................................................................49 7.3.1.4 Method of test.......................................................................................................................................49 7.3.1.4.1 Initial conditions..............................................................................................................................49 7.3.1.4.2 Procedure.........................................................................................................................................50 7.3.1.5 Test requirements..................................................................................................................................50 7.3.2 Multipath fading Case 2..............................................................................................................................50 7.3.2.1 Definition and applicability...................................................................................................................50 7.3.2.2 Minimum requirement..........................................................................................................................50 7.3.2.3 Test purpose..........................................................................................................................................51 7.3.2.4 Method of test.......................................................................................................................................51 7.3.2.4.1 Initial conditions..............................................................................................................................51 7.3.2.4.2 Procedure.........................................................................................................................................51 7.3.2.5 Test requirements..................................................................................................................................51 7.3.3 Multipath fading Case 3..............................................................................................................................51 7.3.3.1 Definition and applicability...................................................................................................................51 7.3.3.2 Minimum requirements.........................................................................................................................51 7.3.3.3 Test purpose..........................................................................................................................................52 7.3.3.4 Method of test.......................................................................................................................................52 7.3.3.4.1 Initial conditions..............................................................................................................................52 7.3.3.4.2 Procedure.........................................................................................................................................52 7.3.3.5 Test requirements............................................................................................................................53 7.4 Base station transmit diversity mode................................................................................................................53 7.4.1 Demodulation of BCH in Block STTD mode..................................................................................................53 7.5 Power control in downlink...............................................................................................................................53 7.5.1 Minimum requirements...............................................................................................................................53 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 7 ETSI TS 134 122 V3.6.0 (2001-12) 8 Requirements for Support of RRM........................................................................................................53 8.1 General.............................................................................................................................................................53 8.2 Idle Mode Tasks...............................................................................................................................................53 8.2.1 Introduction.................................................................................................................................................53 8.2.2 RF Cell Selection Scenario.........................................................................................................................54 8.2.2.1 Requirements for Cell Selection single carrier single cell case.............................................................54 8.2.2.2 Requirements for Cell Selection multicarrier carrier multi cell case....................................................54 8.2.3 RF Cell Re-Selection Scenario...................................................................................................................54 8.2.3.1 Requirements for Cell Re-Selection single carrier multi cell case........................................................54 8.2.4 PLMN Selection and Re-Selection Scenario..............................................................................................54 8.2.5 Location Registration Scenario...................................................................................................................54 8.3 RRC Connection mobility................................................................................................................................54 8.3.1 Handover....................................................................................................................................................54 8.3.1.1 Introduction...........................................................................................................................................54 8.3.1.2 Handover 3G to 3G...............................................................................................................................54 8.3.1.2.1 TDD/TDD Handover.......................................................................................................................54 8.3.1.2.2 TDD/FDD Handover.......................................................................................................................54 8.3.1.3 Handover 3G to 2G...............................................................................................................................54 8.3.1.3.1 Handover to GSM............................................................................................................................54 8.3.2 Radio Link Management............................................................................................................................54 8.3.2.1 Link adaptation.....................................................................................................................................54 8.3.3 Cell Update.................................................................................................................................................55 8.3.4 URA Update...............................................................................................................................................55 8.4 RRC Connection Control.................................................................................................................................55 8.4.1 Radio Access Bearer Control......................................................................................................................55 8.5 Dynamic Channel Allocation...........................................................................................................................55 8.6 Timing characteristics......................................................................................................................................55 8.6.1 Timing Advance (TA) Requirements.........................................................................................................55 8.7 Measurements Performance Requirements......................................................................................................55 8.7.1 Measurements Performance for UE............................................................................................................55 Annex A (informative): Connection Diagrams....................................................................................56 Annex B (normative): Global In-Channel TX-Test..........................................................................60 B.1 General.............................................................................................................................................................60 B.2 Definition of the process..................................................................................................................................60 B.2.1 Basic principle............................................................................................................................................60 B.2.2 Output signal of the TX under test..............................................................................................................60 B.2.3 Reference signal..........................................................................................................................................60 B.2.4 void.............................................................................................................................................................61 B.2.5 Classification of measurement results.........................................................................................................61 B.2.6 Process definition to achieve results of type “deviation”............................................................................61 B.2.7 Process definition to achieve results of type "residual"..............................................................................62 B.2.7.1 Error Vector Magnitude (EVM)............................................................................................................62 B.2.7.2 Peak Code Domain Error (PCDE)........................................................................................................62 B.3 Notes................................................................................................................................................................63 Annex C (normative): Measurement channels..................................................................................65 C.1 General.............................................................................................................................................................65 C.2 UL Reference measurement channels..............................................................................................................66 C.2.1 UL reference measurement channel (12.2 kbps).........................................................................................66 C.2.2 UL multi code reference measurement channel (12.2 kbps).......................................................................67 C.2.3 UL reference measurement channel (64 kbps)............................................................................................68 C.2.4 UL reference measurement channel (144 kbps)..........................................................................................69 C.2.5 UL reference measurement channel (384 kbps)..........................................................................................70 C.3 DL Reference measurement channels..............................................................................................................71 C.3.1 DL reference measurement channel (12.2 kbps).........................................................................................71 C.3.2 DL reference measurement channel (64 kbps)............................................................................................72 C.3.3 DL reference measurement channel (144 kbps)..........................................................................................73 C.3.4 DL reference measurement channel (384 kbps)..........................................................................................74 C.3.5 BCH reference measurement channel.........................................................................................................75 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 8 ETSI TS 134 122 V3.6.0 (2001-12) Annex D (normative): Propagation conditions..................................................................................76 D.1 Test Environments............................................................................................................................................76 D.2 Propagation Conditions....................................................................................................................................76 D.2.1 Static propagation condition.......................................................................................................................76 D.2.2 Multi-path fading propagation conditions...................................................................................................76 Annex E (normative): Common RF test conditions..........................................................................77 E.1 General.............................................................................................................................................................77 E.2 Connection Set-up............................................................................................................................................77 E.3 During connection............................................................................................................................................77 E.3.1 Measurement of Tx Characteristics............................................................................................................77 E.3.2 Measurement of Rx Characteristics............................................................................................................78 E.3.3 Measurement of Performance requirements...............................................................................................78 Annex F (normative): General test conditions and declarations.....................................................79 F.1 Acceptable uncertainty of Test System............................................................................................................79 F.1.1 Measurement of test environments.............................................................................................................79 F.1.2 Measurement of transmitter........................................................................................................................80 F.1.3 Measurement of receiver............................................................................................................................81 F.1.4 Performance requirement............................................................................................................................81 F.1.5 Requirements for support of RRM.............................................................................................................81 F.2 Test Tolerances (This clause is informative)....................................................................................................81 F.2.1 Transmitter..................................................................................................................................................82 F.2.2 Receiver......................................................................................................................................................82 F.2.3 Performance requirements..........................................................................................................................82 F.2.4 Requirements for support of RRM.............................................................................................................83 F.3 Interpretation of measurement results..............................................................................................................83 F.4 Derivation of Test Requirements (This clause is informative).........................................................................83 F.5 Acceptable uncertainty of Test Equipment (This clause is informative)..........................................................87 F.5.1 Transmitter measurements..........................................................................................................................87 F.5.2 Receiver measurements..............................................................................................................................87 F.5.3 Performance measurements........................................................................................................................87 F.6 General rules for statistical testing...................................................................................................................88 F.6.1 Statistical testing of receiver BER/BLER performance..............................................................................88 F.6.1.1 Error Definition.....................................................................................................................................88 F.6.1.2 Test Method..........................................................................................................................................88 F.6.1.3 Test Criteria...........................................................................................................................................88 F.6.1.4 Calculation assumptions........................................................................................................................88 F.6.1.5 Definition of good pass fail decision.....................................................................................................89 F.6.1.6 Good balance between testtime and statistical significance..................................................................89 F.6.1.7 Pass fail decision rules..........................................................................................................................90 F.6.1.8 Test conditions for BER,BLER tests.....................................................................................................91 F.6.1.9 Practical Use (informative)...................................................................................................................92 Annex G (normative): Environmental conditions.............................................................................95 G.1 General.............................................................................................................................................................95 G.2 Environmental requirements............................................................................................................................95 G.2.1 Temperature................................................................................................................................................95 G.2.2 Voltage........................................................................................................................................................95 G.2.3 Vibration.....................................................................................................................................................96 G.2.4 Specified frequency range..........................................................................................................................96 Annex H (normative): Terminal Baseline and Service Implementation Capabilities (TDD)........97 H.1 Baseline Implementation Capabilities:.............................................................................................................97 H.2 Service Implementation Capabilities:...............................................................................................................97 Annex I (informative): Change history...............................................................................................98 History..............................................................................................................................................................99 ETSI 3GPP TS 34.122 version 3.6.0 Release 1999 9 ETSI TS 134 122 V3.6.0 (2001-12) Foreword rd This Technical Specification (TS) has been produced by the 3 Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI

See more

The list of books you might like

Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.
DMCA & Copyright: Dear all, most of the website is community built, users are uploading hundred of books everyday, which makes really hard for us to identify copyrighted material, please contact us if you want any material removed.
Copyright @ PDFdrive.to, 2022 | We love our users