Tribology Transactions 1999: Vol 42 Index

9 Pages·1999·2.8 MB·English

STLE 1999
COMBINED SUBJECT AND AUTHOR INDEX
Each paper published during the indexed period is assigned a sequence num-
ber, the first two digits of which indicate the year in which the paper was pub-
lished. The index may be entered either through the Subject Index or the Author
Index.
The Subject Index design was revised in 1991, with key words appearing in
one of the following subject areas:
Bearings Lubrication Regimes
Computing and Engineering Methods Maintenance and Condition
Extreme Conditions Tribology Monitoring
Friction Materials Properties and Tribology
Human and Environmental Metalworking, Materials Machining
Lubricant Classes (by Application) Seals
Lubricant Components Surface Technology
Lubricant Manufacture, Application Tribology of Equipment
and Disposal Tribology in Industry
Lubricant Properties and Problems Wear and Failure
Inspection of the index will familiarize the user with the location of key words.
The sequence number of a paper appears next to the key words which describe
a significant part of the content of that paper.
The Author Index is an alphabetical listing of all authors of indexed papers,
together with corresponding paper sequence numbers. Having determined the
sequence numbers associated with a given subject or author, the papers to which
these numbers refer may be found in the Chronological Listing. This listing
provides a complete reference for all papers published in the 1999 issues of
Tribology Transactions (T42) and Lubrication Engineering (L55). The papers are
listed by author(s), title, publication, volume number, issue number, and page
numbers and are in order of ascending sequence number.
An excellent source of general information in the field of tribology is the Hand-
book of Lubrication series, edited by E. R. Booser and published by CRC Press
under the sponsorship of STLE.
The Combined Index is edited by Martin Webster of the Mobil Technology Com-
pany, Paulsboro, NJ. The Society gratefully acknowledges Dr. Webster’s efforts
in this endeavor.
1999 Chronological Listing
Forster, N., “Rolling Contact Testing of Vapor Phase 99009 Van de Veide, F., Willen, P., De Baets, P. and Van Geetruyen,
Lubricants—Part lil: Surface Analysis,” T42, 1, 1-9. C., “Substitution of Inexpensive Bench Tests for the FZG Scuff-
ing Test—Part I: Calculations,” T42, 1, 63-70.
Forster, N., “Rolling Contact Testing of Vapor Phase
Lubricants—Part IV: Surface Analysis,” T42, 1, 10-20. Van de Velde, F., Willen, P., De Baets, P. and Van Geetruyen,
C., “Substitution of Inexpensive Bench Tests for the FZG Scuff-
Woydt, M., Skoop, A., Dérfel, |. and Witke, K., “Wear Engineer- ing Test—Part II: Oil Tests,” T42, 1, 71-75.
ing of Oxides/Antiwear Oxides,” T42, 1, 21-31.
Haizuka, S., Naruse, C. and Tamenaga, J., “Study on Tooth Sur-
Jaworski, J. and Schmid, S.R., “Survivability of Laminated Poly- face Strength of Spur Gears—Part |: Experimental Procedure
mer Lubricant Films in lroning,” T42, 1, 32-38. and Determination of Tooth Surface and Strength,” T42, 1, 76-
83.
Sharif, K.J. H., Holt, C. A., Evans, H.P. and Snidle, R.W., “Sim-
plified Analysis of Non-Newtonian Effects in a Circular Yao, J., “The Role of Sodium Perfluorobutyrate in Promoting the
Elastohydrodynamic Contact and Comparison with Experi- Antioxidancy of DODPA in Synthetic Esters,” T42, 1, 84-89.
ment,” T42, 1, 39-45.
Yamaguchi, E.S., “The Relative Wear Performance of Neutral and
Choy, F.K., Polyshchuk, V., Braun, M.J. and Lu, M., “A New Basic Zinc Dithiophosphates in Engines,” T42, 1, 90-95.
Method in Acoustic Health Monitoring in Mechanical Seals,”
T42, 1, 46-52. Lai, Y.G. and Sui, P.C., “A Finite-Volume Multigrid Calculation
Method for Elastohydrodynamically Lubricated Point Contact
Kudish, I., “Formulation of a Non-Steady Lubrication Problem for Problem,” T42, 1, 96-105.
a Non-Conformal Contact,” T42, 1, 53-57.
Nosaka, M., Kikuchi, M., Oike, M. and Kawai, N., “Tribo-Character-
Nikolajsen, J.L., “The Effect of Aerated Oil on the Load Capacity istics of Cryogenic Hybrid Ceramic Ball Bearings for Rocket
of a Piain Journal Bearing,” T42, 1, 58-62. Turbopumps: Bearing Wear and Transfer Film,” T42, 1, 106-115.
Shuster, M., Mahler, F. and Crysler, D., “Metallurgica! and Metro- Jesh, M.S. and Segar, P.R., “The Effect of Vapor Phase
logical Examinations of the Cylinder Liner-Piston Ring Surfaces Chemicals on Head/Disk Interface Tribology,” T42, 2, 310-
After Heavy Duty Diesel Engine Testing,” T42, 1, 116-125. 316.
Yuan, J.H., Mediey, J.B. and Ferguson, J.H., “Spring-Supported Jones, W.R. Jr., Posiowski, A.K. Shogrin, B.A., Herrera-Fierro,
Thrust Bearings Used in Hydroelectric Generators: Laboratory P. and Jansen, M.J., “Evaluation of Several Space Lubricants
Test Facility,” T42, 1, 126-135. Using a Vacuum Four-Ball Tribometer,” T42, 2, 317-323.
Houpert, L., “Bearing Life Calculation in Oscillatory Applications,” Sukirno and Masuko, M., “Oxidative Degradation of Mineral Oil
T42, 1, 136-143. under Tribocontact and Ineffectiveness of Inhibitors,” T42, 2,
324-330.
Shih, H.-C. and Wilson, W. R.D., “Effects of Contact Pressure and
Strain on Friction in Sheet-Metal Forming,” T42, 1, 144-151. Zhang, R. and Chang, H.S., “Stability of a New Type of Hydro-
Static/Hydrodynamic Floating Ring Gas Bearing,” T42, 2, 331-
Haizuka, S., Naruse, C. and Tamenaga, J., “Study on Tooth Sur- 337.
face Strength of Spur Gears—Part II: Special Attention on the
Effects of Lubricating Oil, Material and Tooth Surface Heat DellaCorte, C. Fellenstein, J.A. and Benoy, P.A., “Evaluation of
Treatment,” T42, 1, 152-161. Advanced Solid Lubricant Coatings for Foil Air Bearings Oper-
ating at 25° and 500° Celsius,” T42, 2, 338-342.
Saito, T., Naka, M., Ito, H., Yamamoto, T. and Matsunaga, S.,
“Particle Generation by Solid-Lubricated Bearings and Ball Sanchez, L.R., “Experimental Investigation of Friction Effects En-
Screws in Vacuum Environments,” T42, 1, 162-167. hanced by Tool Geometry and Forming Method on Plane Strain
Sheet Metal Forming,” T42, 2, 343-352.
Bell, D., Chou, J., Nowag, L. and Liang, S., “Modeling of the Envi-
ronmental Effect of Cutting Fluid,” T42, 1, 168-173. Ezugwu, E.O., Wang, Z.M. and Okeke, C.1., “Tool Life and Sur-
face Integrity When Machining Inconel 718 with PVD and CVD
Howard, S.A., “Rotordynamics and Design Methods of an Oil- Coated Tools,” T42, 2, 353-360.
Free Turbocharger,” T42, 1, 174-179.
Harti, M., Krupka, |. and Liska, M., “Elastohydrodynamic Film
Mirmiran, S., Tsukruk, V.V. and Erdemir, A., “Nano-Tribological and Thickness Mapping by Computer Differential Colorimetry,” T42,
Wear Behavior of Boric Acid Solid Lubricant,” T42, 1, 180-185. 2, 361-368.
Nikolajsen, J.L., “Viscosity and Density Models for Aerated Oil in Jiao, H., Jiaa, C.L., Adam, J. and Cromwell, E.F., “Laser Texture
Fluid-Film Bearings,” T42, 1, 186-191. and Tribological Study of Alternative Substrates,” T42, 2, 369-
376.
Lacey, P.I. and Stockwell, R.T., “Development of a Methodology
to Predict Cylinder Liner Scuffing in the 6V92TA Engine Lubri- Kharrat, M., Krichen, A. and Chateauminois, A., “Analysis of
cant Test,” T42, 1, 192-201. the Fretting Conditions in a Contact Between an Epoxy Ther-
moset and a Glass Counterface,” T42, 2, 377-384.
Wang, H.W., Skeldon, P. and Thompson, G.E., “Tribological En-
hancement of Aluminum by Porous Anodic Films Containing Li, Y., Billington, S., Zhang, C., Kurfess, T., Danyluk, S. and
Solid Lubricants of MoS2 Precursors,” T42, 1, 202-209. Liang, S., “Dynamic Prognostic Prediction of Defect Propaga-
tion on Rolling Element Bearings,” T42, 2, 385-392.
Wygant, K.D., Flack, R.D. and Barrett, L.E., “influence of Pad
Pivot Friction on Tilting-Pad Journal Bearing Measurements— Nakatsuji, T. and Mori, A., “Pitting Durability of Electrolytically
Part |: Steady Operating Position,” T42, 1, 210-215. Polished Medium Carbon Steel Gears - Succeeding Report,”
T42, 2, 393-400.
Witelski, T.P. and Hendriks, F., “Stability of Gas Bearing Sliders
for Large Bearing Number: Convective Instability of the Tapered Chen, G., Wang, Q., Cao, Y. and Tso, C., “Development of an
Slider,” T42, 1, 216-222. Isothermal Journal Bearing Employing Heat-Pipe Cooling Tech-
nology,” T42, 2, 401-406.
Chen, G., Wang, Q. and Cao, Y., “Modeling a Heat Source/Heat
Sink for Tribological Applications,” T42, 1, 223-230. Smith, P.W. and Best, G.L., “Figures of Merit for Dynamically
Unloaded Air Bearing Sliders,” T42, 2, 407-412.
Ville, F. and Nélias, D., “An Experimental Study on the Concen-
tration and Shape of Dents Caused by Spherical Metallic Par- Wahl, M.H., Womack, K. and Cornaby, D., “Concepts and Limi-
ticles in EHL Contacts,” T42, 1, 231-240. tations of Using Optical Profilometry for Air Bearing Simula-
tions of Hard Disk Sliders,” T42, 2, 413-418.
Tallian, T.E., “Data Fitted Bearing Life Prediction Model for Vari-
able Operating Conditions,” T42, 1, 241-249. Wang, N., and Chang, C., “An Application of Newton's Method to
the Lubrication Analysis of Air-Lubricated Bearings,” T42, 2,
Wygant, K.D., Flack, R.D. and Barrett, L.E., “Influence of Pad 419-424.
Pivot Friction on Tilting-Pad Journal Bearing Measurements—
Part Il: Dynamic Coefficients,” T42, 1, 250-256. Winoto, S.H., “Performance of a Viscous Pump with Radial Pump-
ing Grooves at Low Speeds,” T42, 2, 425-428.
Kwon, P. and Kountanya, R., “Experimental Observations on
Flank Wear in Machining Spherodized Plain Carbon Steels,” Karis, T.E., Miller, J.L., Hunziker, H.E., De Vries, M.S., Hopper,
T42, 2, 265-272. D.A. and Nagaraj, H.S., “Oxidation Chemistry of a
Pentaerythritol Tetraester Oil,” T42, 3, 431-442.
Oike, M., Nosaka, M., Kikuchi, M. and Hasegawa, S., “Two-Phase
Flow in Floating-Ring Seals for Cryogenic Turbopumps,” T42, Hu, Y.-Z., Barber, G.C. and Zhu, D., “Numerical Analysis for the
2, 273-281. Elastic Contact of Real Rough Surfaces,” T42, 3, 443-452.
Carré, D.J. and Bertrand, P.A., “A Model to Calculate Neder, Z., Varadi, K., Man, L. and Friedrich, K., “Numerical and
Evaporative Oil Loss in Spacecraft Mechanisms,” T42, 2, Finite Element Contact Temperature Analysis of Steel-Bronze
282-288. Real Surfaces in Dry Sliding Contact,” T42, 3, 453-462.
Chiu, Y.P., “An Approach for Fatigue Cracking Failure Prediction Tyndall, G.W., Karis, T.E. and Jhon, M.S., “Spreading Profiles of
of Ceramic Rolling Elements under Hertzian Loading,” T42, 2, Molecularly Thin Perfluorpolether Films,” 142, 3, 463-470.
289-295.
Ojmertz, K.M.C. and Oskarson, H.-B., “Wear on SiC Whiskers
Delfort, B., Daoudal, B. and Barre, L., “Particle Size Determina- Reinforced Ceramic Inserts When Cutting Inconel with Waterjet
tion of (Functionalized) Collodial Calcium Carbonate by Small Assistance,” T42, 3, 471-478.
Angle X-Ray Scattering—Relation with Antiwear Properties,”
T42, 2, 296-302. Ratoi, M. and Spikes, H.A., “Lubricating Properties of Aqueous
Surfactant Solutions,” T42, 3, 479-486.
Hartl, M., Krupka, I., Poliscuk, R. and Liska, M., “An Automatic
System for Real-Time Evaluation of EHD Film Thickness and Ransom, D.L. and San Andrés, L., "Identification of Force Coef-
Shape Based on the Colorimetric Interferometry,” T42, 2, 303- ficients from a Gas Annular Seal—Effect of Transition Flow
309. Regime to Turbulence,” T42, 3, 487-494.
Mosieh, M., Laube, S.J.P. and Suh, N.P., “Friction of Undulated Segall, A.E., Conway, J.C.Jr., Stiver Ill, D.H., Moose, C.A. and
Surfaces Coated with MoS, by Pulsed Laser Deposition,” T42, Hershman, S., “Elevated Temperature Fretting Evaluations
3, 495-502. Using a Flat-on-Flat Configuration,” T42, 3, 681-685.
Wilkinson, C.M.R. and Oliver, A.V., “The Durability of Gear and Flack, R.D. and Whitehead, L.D., “Velocity Measurements in an
Disc Specimens—Part |: The Effect of Some Novel Materials Automotive Torque Converter—Part |: Average Pump Measure-
and Surface Treatments,” T42, 3, 503-510. ments,” T42, 4, 687-696.
Etsion, |., Kligerman, Y. and Halperin, G., “Analytical and Ex- Flack, R.D. and Whitehead, L.D., “Velocity Measurements in an
perimental Investigation of Laser-Textured Mechanical Seal Automotive Torque Converter—Part II: Average Turbine and
Faces,” T42, 3, 511-516. Stator Measurements,” T42, 4, 697-706.
Gates, R.S., Ying, T.N., Wang, P.S., Yin, Z., Chen, C.1., Wang, Y. Cento, P., and Dareing, D.W., “Ceramic Materials in Hybrid Ball
and Hsu, S.M., “Mechanisms of Aicohols in Assisting the Dia- Bearings,” T42, 4, 707-714.
mond Grinding of Ceramics,” T42, 3, 517-522.
Gates, R.S., Wang, Y., Ying, T.N. and Hsu, S.M., “A Grinding Map
Huang, P. and Rodkiewicz, C.M., “Thrust Bearings in Thermal Concept for Optimization of Ceramic Machining,” T42, 4, 715-722.
Elastohydrodynamic Lubrication: On the Slider Velocity Corre-
sponding to the Maximum Load,” T42, 3, 523-528. Hashimoto, H. and Ochiai, M., “Measurements of Compressibility
Effects in Stepped Thrust Gas Flim Bearings,” T42, 4, 723-730.
Li, H., Chao, K.K., Duda, J.L. and Klaus, E.E., “A Study of Wear
Chemistry and Contact Temperature Using a Microsample Four- Merati, P. and Okita, N. A., “Experimental and Computational In-
Ball Wear Test,” T42, 3, 529-534. vestigation of Flow and Thermal Behavior of a Mechanical Seal,”
T42, 4, 731-738.
Zou, M. and Green, I., “Clearance Control of a Mechanical Face
Seal,” T42, 3, 535-540. Diaz, S.E. and San Andrés, L., “A Method for Identification of
Bearing Force Coefficients and Its Application to a Squeeze
Pettinato, B. and De Choudhury, P., “Test Results of Key and Film Damper with a Bubbly Lubricant,” T42, 4, 739-746.
Spherical Pivot Five-Shoe Tilt Pad Journal Bearings—Part |
Performance Measurements,” T42, 3, 541-547. Shogrin, B.A., Jr. Jones, W.R., Herrera-Fierro, P., Lin, T.Y. and
Kawa, H., “Evaluation of Boundary-Enhancement Additives for
Berdichevsky, A.L., “Investigation Into Power Steering Seal Noise Perfluoropolyethers,” T42, 4, 747-754.
and Vibrational Instability Criteria,” T42, 3, 548-558.
Soejima, M., Ejima, Y., Wakuri, Y. and Kitahara, T., “improve-
Gunsel, S., Korcek, S., Smeeth, M. and Spikes, H.A., “The ment of Lubrication for Cam and Follower,” T42, 4, 755-762.
Elastohydrodynamic Friction and Film Forming Properties of
Lubricant Base Oils,” T42, 3, 559-569. Wang, Q.J. and Liu, G., “Thermoelastic Asperity Contact Model
Considering Steady-State Heat Transfer,” T42, 4, 763-770.
Haizuka, S., Naruse, C. and Yamanaka, T., “Study of Influence of
Helix Angle on Friction Characteristics of Helical Gears,” T42, Broshteyn, L.A. and Kreiner, J.H., “Energy Efficiency of Indus-
3, 570-580. trial Oils,” T42, 4, 771-776.
Liu, G, Wang, J. and Lin, C., “A Survey of Current Models for Carre, D.J. and Bertrand, P.A., “Modeling and Measurement of
Simulating the Contact between Rough Surfaces,” T42, 3, 581- Aryl Phosphate Ester Vapor Pressures at 50° Celsius,” T42, 4,
591. 777-782.
Burroughs, B.R., Kim, J.H. and Blanchet, T.A., “Boric Acid Self- Fujii, Y., Hirata, M., Maeda, K., Fujii, K. and Yamamoto, S., “New
Lubrication of B,O.—Filled Polymer Composites,” T42, 3, 592- Retainer Material for High Speed and High Temperature Cylin-
600. drical Roller Bearing,” T42, 4, 783-788.
Lin, J.F. and Guu, Y.Y., “Factors Affecting the Tribological Perfor- Howard, S.A., “Preliminary Development of Characterization
mance of Three Resin Bonded Solid Lubricant Films,” T42, 3, Methods for Compliant Air Bearings,” T42, 4, 789-794.
601-609.
Ville, F. and Nelias, D., “Early Fatigue Failure Due to Dents in
Wilkinson, C.M.R. and Oliver, A.V., “The Durability of Gear and EHL Contacts,” T42, 4, 795-800.
Disc Specimens—Part II: Post Failure Examination and Gear-
Disc Correlation,” T42, 3, 610-618. Salant, R.F., Anderson, W. and Jarzynski, J., “Ultrasonic Detec-
tion of Lubricating Flim Collapse in Mechanical Seals,” T42, 4,
Deckman, D.E., Chen, C.-l. and Hsu, S.M., “Effect of Selected 801-806.
Chemical Compounds on the Lubrication of Silicon Carbide,”
T42, 3, 619-625. Kapur, G.S., Chopra, A., Sarpal, A.S., Ramakurmar, S. and Jain,
S., “Studies on Competitive Interactions and Blending Order of
Jisheng, E. and Gawne, D.T., “Effect of Thermochemical Treat- Engine Oil Additives by Variable Temperature 31 P-NMR and
ments on the Sliding Wear Mechanisms of Steel Under Bound- IR Spectroscopy,” T42, 4, 807-812.
ary Lubrication,” T42, 3, 626-632.
Wei, D., Korcek, S. and Spikes, H. A., “The Lubricity of Gaso-
Haizuka, S. and Naruse, C., “Study of Influence of Lubricating line,” T42, 4, 813-823.
Oil and Tooth Height on Friction Characteristics of Helical
Gears,” T42, 3, 633-639. Kletzli, D.B., Cusano, C. and Conry, T.F., “Thermally-Induced
Failures in Railroad Tapered Roller Bearings,” T42, 4, 824-832.
Heshmat, H. and Heshmat, C.A., “The Effect of Slider Geometry
on the Performance of a Powder Lubricated Bearing,” T42, 3, Furey, M., Tritt, B., Kajdas, C. and Kempinski, R., “Lubrication
640-646. Ceramics by Tribopolymerization: A Designed Experiment to
Determine Effects of Monomer Structure, Load, and Speed on
Lo, S.-W. and Fu, R.-F., “The Influence of Bulk Plastic Flow on Wear,” T42, 4, 833-841.
Lubricant Permeation from Micro Oil Pits in Metal Forming,”
T42, 3, 647-653. Kahiman, L. and Hutching, I., “Effect of Particulate Contamination
in Grease-Lubricated Hybrid Rolling Bearings,” T42, 4, 842-850.
Ovaert, T.C. and Talmage, G., “The Temperature of Sliding Con-
tacts: Application to the Anisotropic Half-Space,” T42, 3, 654-660. Bercea, M., Bercea, |., Nelias, D. and Orlau, D., “Polyethylene
as Additive for Mineral Oils—Part |: Influence of the Polymer
Prakash, J. and Gururajan, K., “Effect of Velocity Slip in an Infi- Concentration on the Flim-Forming Properties in Rolling Bear-
nitely Long Rough Porous Journal Bearing,” T42, 3, 661-667. ing,” T42, 4, 851-859.
Witelski, T.P. and Hendriks, F., “Large Bearing Number Stability Asadauskas, S., Perez, J. M. and Erhan, S., “Kinetics of Oxida-
Analysis for Tango Class Gas Bearing Sliders,” T42, 3, 668-674. tive Degradation: Applicability of Time and Temperature Su-
perposition,” T42, 4, 860-866.
Pettinato, B. and De Choudhury, P., “Test Results of Key and
Spherical Pivot Five-Shoe Tilt Pad Journal Bearings—Part II: 99112 Cann, P.M., “Starved Grease Lubrication of Rolling Contacts,” T42,
Dynamic Measurements,” T42, 3, 675-680. 4, 867-873.
Post, R., Conry, T.F. and Cusano, C.,”The Effect of Adapter Crown Liston, M.-J. A., “RCF Life Comparison of Bearing Steels ant Two
Wear on Rated Fatigue Life of a Railroad Tapered Roller Bear- Stress Levels,” L55, 6, 12-19.
ing,” T42, 4, 874-880.
Park, W., Hilton, M.R., Leveille, A.R., Ward, P.C., McClintock,
Ertas, A., Culvaici, O. and J.R., Carper, H., “Determination of Fric- D.E. and Smith, D.W., “Microstructure, Fatigue Life and Load
tion Characteristics of J-55 OCTG Connections Lubricated with Capacity of PM Tool Steel REX20 for Bearing Applications,”
Environmentally Safe Thread Compound,” T42, 4, 881-887. L55, 6, 20-30.
Vick, B., Furey, M. and Iskandar, K., “Surface Temperature Gen- Strzelecki, S. and Wojcicki, R., “Measurement of Tribological
erated by Friction with Ceramic Materials,” T42, 4, 888-894. Characteristics in the Research of Journal Bearing Materials,”
L55, 6, 31-35.
Yamaguchi, E.S., Onopchenko, A., Francisco, M.M. and Chan,
C.Y., “The Relative Oxidation Inhibition Performance of Some Neu- Magathayes, J.F., Ventsel, L. and MacDonald, D.D., “Environ-
tral and Basic Zinc Dithiophosphate Salts,” T42, 4, 895-901. mental Effects on Pitting Corrosion of AISI 440C Ball Bearing
Steels—Experimental Results,” L55, 6, 36-41.
Han, D. and Masuko, M., “Comparison of Antiwear Additive Re-
sponse Among Several Base Oils of Different Polarities,” T42, Netzel, J.P. and Freimanis, |., “Performance and Wear Tesing of
4, 902-906. Mechanical Seals in Sea Water Service,” L55, 7, 15-19.
Hemmi, M. and Inque, T., “The Behavior of the Centrally Pivoted Pecht, G.G. and Netzel, J.P., “Design and Application of Non-
Thrust Bearing Pad with Hydrostatic Recesses Pressurized by Contacting Gas Lubricated Seals for Slow-Speed Services,”
a Constant-Rate Flow,” T42, 4, 907-911. L55, 7, 20-25.
Luo, j., Qian, L., Wen, S., Wen, L., Wen, S. and Li, L., “The Fail- Sharma, S.K., Snyder, C.E.Jr., Gschwender, L.J., Liang, J.C.
ure of Fluid Film at Nano-Scale,” T42, 4, 912-916. and Schreiber, B.F., “Stuck Servovalves in Aircraft Hydraulic
Systems,” L55, 7, 27-32.
Zantopulos, H. and Russell, J., “A Fatigue Life Comparison of
Two-Row Tapered Roller Bearings and Spherical Roller Bear- Arnsek, A. and Vizintin, J., “Scuffing Load Capacity of Rape-
ings,” T42, 4, 917-921. seed-Based Oils,” L55, 8, 11-18.
Zhang, C., Zhang, H. and Qiu, Z., “Fast Analysis of Crankshaft Kato, N., Komiya, H., Kimura, A. and Kimura, H., “Lubrication
Bearings with a Database Including Shear Thinning and Vis- of Biodegradable Greases with Rapeseed Oil Base,” L55, 8,
coelastic Effects,” T42, 4, 922-928. 19-25.
Gatto, V. J., Grina, M. A., “Effect of Base Oil Type, Oxidation Test Deneuville, P., “On the Use of Laboratory Friction Tests to Se-
Conditions and Phenolic Antioxidant Structure on the Detec- lect Lubricants for Cold Rolling of Aluminum Alloys,” L55, 8,
tion and Magnitude of Hindered Phenol/Diphenylamine Syner- 28-32.
gism,” L55, 1, 11-20.
Sasaki, A., Uchiyama, S. and Yamamoto, T., “Generation of Static
Mikulan, K.M. and Ross, N.C., “The Relationship of Various So- Electricity During Oil Filtration,” L55, 9, 14-21.
dium Sulfonates to Their Properties and Their Performance in
Soluble Base Products,” L55, 1, 21-26. Sasaki, A., Uchiyama, S. and Yamamoto, T., “Free Radicals and
Oil Auto-Oxidation Due to Spark Discharges of Static Electric-
Schenach, T.A., “A simple Process for the Recycling of ity,” L55, 9, 24-27.
Water-Based Metalworking Fluids,” L55, 2, 15-22.
Perez, J.M., Weller, D.E.Jr., Duda, J.L., “Sequential Four-Ball
Ngaile, G. and Saiki, H., “Cold Forging Tribo-Test Based on Varia- Study of Some Lubricating Oils,” L55, 9, 28-32.
tion of Deformation Patterns at Tool-Workpiece Interface.” L55,
2, 24-32. Humphrey, G.R., “Condition-Based Monitoring Using Energy Dis-
persive X-Ray Fluorescence,” L55, 10, 19-26.
Godfrey, D., “Iron Oxides and Rust (Hydrated Iron Oxides) in Tri-
bology,” L55, 2, 33-37. Whitlock, R.R., Humphrey, G.R. and Churchill, D.B., “Filter De-
bris Analysis by XRF Using Commercial Equipment Today,” L55,
Zhao, Q, Kang, H.J., Fu, L., Talke, F.E. and Perettie, D.J., “Tri- 10, 27-31.
bological Study of Phosphazene-Type Additives in Perfluoro-
polyether Lubricant for Hard Disk Applications,” L55, 3, 16-21. Anderson, D.P., Lukas, M.X., Johnson, B. and Cunningham,
M., “Rotrode Filter Spectroscopy—A Method for Multi-Elemen-
Kang, H.J., Zhao, Q, Talke, F.E., Perettie, D.J., Dekoven, B.M., tal Analysis of Particles in Used Lubricating Oil,” L55, 10, 32-
Morgan, T.A., Fischer, D.A., Hsu, D.A. and Bhatia, S., “The 40.
Use of Cyclic Phosphazene Additives to Enhance the Perfor-
mance of the Head/Disk Interface,” L55, 3, 22-27. Stellman, C.M., Ewing, K.J., Bucholtz, F. and Aggarwal, I.D.,
“Monitoring the Degradation of a Synthetic Lubricant Oil Using
Krantz, J., Tumoas, R. and Bushan, B., “Electrorheological Flu- Infrared Absorption, Fluorescence Emission and Multivariate
ids for Lubrication,” L55, 3, 28-35. Analysis: A Feasibility Study,” L55, 10, 42-52.
Rizvi, S. Q. A., “Additives for Automotive Fuels and Lubricants,” Helmsetter, A., “Chemical Management and Recycling,” L55,
L55, 4, 33-39. 11, 10-14.
Samman, N. and Lau, S.N., “Grease-Based Open Gear Lubri- Hohn, B.-R., Michaelis, K. and Dobereiner, R., “Load Carrying
cants: Multi Service Product Development and Evaluation,” L55, Capacity Properties of Fast Biodegradable Gear Lubricants,”
4, 40-48. L55, 11, 32-38.
Bowman, W.F. and Stachowiak, G.W., “Application of Sealed Cap- Heenan, D.F., Januszkiewicz, K.R. and Stratford, G.,
sule Differential Scanning Calorimetry—Part Il: Assessing the “Supercritical Fluid Extraction of Residues from Aluminum Sheet
Performance of Antioxidants and Base Oils,” L55, 5, 22-29. Surfaces,” L55, 12, 18-22.
Prashad, H., “Diagnosis and Cause Analysis of Rolling-Element Lai, J.-H., Huang, T.-K., Lee, C.M. and Lau, H.C.H., “The Effects
Bearing Failure in Electrical Power Equipment Due to Current of Emulsifier HLB Value, Dispersant Dose and Temperature on
Passage,” L55, 5, 30-35. the Emulsion Particle Size of Rolling Oil,” L55, 12, 25-28.
1999 Subject Index
Bearings Compliant 99102
Air, Gas 99023, 99029, 99043, 99044, 99053, 99054, 99055, 99086, Foil 99044
99093, 99102 Journal 99008, 99052, 99055, 99085, 99136
Ceramic 99135 Slider 99086
Hydrodynamic 99017, 99025, 99043, 99044, 99068, 99071, 99082, 99085, Squeeze-Film 99095
99086, 99087, 99093, 99118 Tilting-Pad 99017, 99028, 99033, 99071, 99087, 99118
Hydrostatic 99043, 99118 Lubricant Manufacture, Application and Disposal
Porous Metal 99085 Application Method
Rolling Element 99018, 99032, 99037, 99050, 99101, 99109, 99110, Vapor Phase 99001, 99002
99112, 99120, 99133, 99134, 99135, 99137, 99142 Manufacture 99130
Ball 99015, 99021, 99091 Blending 99130
Cylindrical Roller 99101 Refining 99130
Spherical Roller 99120 Lubricant Properties and Problems
Tapered Roller 99107, 99113, 99120 Additive Degradation 99105
Computing and Engineering Methods Interaction 99105
Computerized Maintenance—see Maintenance Additive Deposition—see Surface Technology
Contact Mechanics 99005, 99007, 99014, 99039, 99048, 99058, 99059, Additive Solubility 99117
99075, 99083, 99098, 99113, 99125 Contamination 99031, 99103, 99109
Dynamic Modelling 99072, 99095, 99121 Incompatible Fluids 99137
Fluid Mechanics 99005, 99007, 99008, 99014, 99025, 99029, 99055, Particulates 99031, 99103, 99109, 99148
99066, 99068, 99083, 99085, 99086, 99093, 99094, 99118, 99121 Water 99137
Heat Transfer Analysis 99030, 99059, 99068, 99084, 99094, 99098, Electrical Properties 99133
99107, 99115 Foaming, Gas Entrainment and Release 99008, 99025, 99095
Stress Analysis 99018, 99032, 99037, 99058, 99107, 99113, 99125 Lubricant Degradation 99116, 99145, 99150
Tribology Databases 99121 Oxidation 99012, 99057, 99111, 99122, 99132, 99145
see also Lubrication Regimes Rheology 99082, 99129
Extreme Conditions Tribology Electrorheological Behavior 99129
High Temperature 99003, 99023, 99044, 99101 Non-Newtonian Behavior 99005, 99110, 99121
Low Temperature 99015, 99035 Viscosity 99025, 99106, 99121, 99123
Vacuum and Space 99021, 99036, 99041, 99100 Viscosity-Temperature 99110
Friction Viscoelasticity 99121
Boundary Lubrication 99019, 99024, 99041, 99069, 99097, 99101, Vapor Pressure, Volatility 99036, 99040, 99100
99106, 99114, 99129, 99136, 99140, 99141, 99143 see also Maintenance
EHL (Traction) 99073, 99099 Lubrication Regimes
Hydrodynamic Lubrication 99055, 99071, 99082, 99093 Biolubrication
Mechanisms 99064 Boundary Lubrication 99041, 99042, 99069, 99079, 99080, 99084,
Self Lubrication 99027 99096, 99108, 99117, 99119, 99146
Solid Lubrication 99024, 99064, 99077, 99082 Chemistry 99069, 99079, 99108
Static 99127 Friction—see Friction
Stick-Slip 99045, 99127, 99128 Thermal Effects 99084
Testing Wear—see Wear
Bench Tests 99041, 99045, 99064, 99069, 99093, 99106, 99125 Elastohydrodynamic Lubrication (EHL) 99005, 99007, 99014, 99031,
99143 99039, 99047, 99062, 99068, 99073, 99103, 99106, 99107, 99110,
Equipment Tests 99028, 99033, 99074, 99081 99112, 99119
Unlubricated 99003, 99115 Compliant Surface EHL
Human and Environmental Film Geometry 99039, 99047, 99062, 99073, 99110, 99119
Biolubrication—see Lubrication Regimes Non-Newtonian Lubricants 99063
Conservation 99099, 99124, 99151 Starvation 99107, 99112
Energy 99099 Traction—see Friction
Lubricants 99124, 99151 Hydrodynamic and Hydrostatic Lubrication 99017, 99028, 99033,
Materials 99151 99043, 99052, 99055, 99056, 99063, 99070, 99071, 99085, 99086,
Noise and Vibration 99072 99087, 99093, 99102, 99118, 99139
Pollution 99142 Compressibility 99093
Recycling 99124, 99151 Film Geometry 99028, 99033, 99043, 99055, 99070, 99087, 99118
Safety 99022 Flow Rate 99055, 99089, 99090, 99139
Toxicology 99022 Friction—see Friction
Waste 99151 Gas and Vapor Lubricated 99055
Lubricant Classes (by Application) Load-Carrying Capacity 99008, 99055
Automatic Transmission Fluids 99089, 99090 Roughness Effects 99085
Biodegradable Oils 99152 Stability, Vibration 99023, 99033, 99043, 99063, 99086, 99087, 99102
Fire-Resistant Fluids 99062 Thermal Effects 99017, 99052, 99071
Gear Lubricants 99009, 99010, 99099, 99131, 99146, 99152 Self Lubrication 99076
Greases 99091, 99109, 99112, 99131, 99142 Solid Lubrication 99021, 99077, 99082, 99091, 99125
Hydraulic Fluids 99062, 99099, 99146 Friction—see Friction
Internal Combustion Engine Oils 99130 Wear—see Wear
Metalworking Fluids, Coolants 99022, 99123, 99124, 99154 Vapor Phase Lubrication 99001, 99002
Cutting 99022 Maintenance and Condition Monitoring
Grinding 99092 Equipment Monitoring 99006, 99050, 99104, 99147, 99148, 99149,
Rolling 99143, 99153, 99154 99150
Screw Thread Lubricants 99114 Failure Analysis 99133
Vapor Phase Lubricants 99001, 99002 Filtration, Cleanliness 99031, 99103, 99144, 99145, 99148, 99149
Lubricant Components Life Prediction Methods 99018, 99032, 99037, 99050, 99113, 99120
Additives 99105, 99130 Lubricant Analytical Techniques 99147, 99148, 99150
Antioxidant 99012, 99116, 99122, 99132, 99142 DSC 99012, 99122, 99132
Antiwear 99013, 99038, 99042, 99079, 99096, 99097, 99108, 99117, Liquid Chromatography 99012, 99042
99127, 99128 NMR 99001, 99057, 99105
Corrosion Inhibitor 99123 Spectroscopy 99001, 99057, 99105, 99140, 99145, 99149, 99150
Detergent/Dispersant 99038, 99105, 99106 see also Lubricant Properties
Emulsifiers/Demulsifiers 99123, 99154 Maintenance 99150
Extreme Pressure 99026 see also Wear and Failure
Friction Modifying 99097, 99099 Materials Properties and Tribology
Vi Improver 99110 Ceramics 99003, 99015, 99034, 99037, 99046, 99061, 99067, 99079,
Mineral Basestocks 99122, 99132 99091, 99108, 99115, 99135
Solid Lubricants 99024, 99044, 99064, 99077, 99082 Carbides 99003, 99046, 99061, 99079
Molybdenum Disulfide 99027, 99064, 99082 Composite 99101
PTFE 99021 Nitrides 99003, 99034, 99092, 99097
Synthetic Basestocks 99041, 99057, 99067, 99073, 99100, 99117, 99127, Oxides 99003, 99034
99146, 99150 Diamond 99067, 99092
Fluorocarbons 99060, 99096, 99127, 99128 Ferrous Alloys, Steel 99034, 99078, 99080, 99088, 99126, 99134, 99135,
Hydrocarbons 99073 99137
Organic Esters 99012, 99057, 99117 Metals, Elemental
Phosphate Esters 99100 Aluminum 99027, 99101, 99143
Polyethers 99060, 99096, 99127, 99128 Titanium 99088
Polyglycols 99117 Non-Ferrous Alloys 99101, 99136
Vegetable Oils 99111, 99141, 99142 Polymeric 99135
Water, Water-Based 99062 Self-Lubricating 99027, 99076
Metalworking, Materials Machining Centrifugal Pumps, Motors 99006
Coolants—see Lubricant Classes Torque Converters 99089, 99090
Cutting 99034, 99046, 99061 Vaives 99140
Turning 99034, 99061 Internal Combustion Engines 99013, 99016, 99097, 99130
Finishing 99067, 99092 Diesel 99016, 99026
Grinding 99067, 99092 Magnetic Data Storage Systems 99029, 99040, 99048, 99053, 99054,
Surface Modification—see Surface Technology 99060, 99086, 99127, 99128
Forming 99004, 99019, 99045, 99083, 99125 Hard Discs 99040, 99048, 99053, 99054, 99060, 99127, 99128
Forging 99125 Heads 99029, 99054, 99086
Rolling 99083, 99143, 99153 Rocket Motors 99015, 99035
Seals Seals—see Seals
Reciprocating Seals Tribology in Industry
Piston Rings 99016 Aerospace 99100
Rotary Seals 99035, 99063, 99072, 99104 Space Vehicles 99100
Elastomeric 99072 Aluminum 99143, 99153
Face 99066, 99070, 99104 Automotive 99013, 99089, 99090
Mechanical 99006, 99094, 99104, 99138, 99139 Magnetic Data Storage 99029, 99040, 99048, 99053, 99054, 99060,
Two-Phase 99035 99127
Surface Technology Metaiworking—see Metalworking
Chemical Analytical Techniques 99038 Marine 99138
AES(Auger) 99001, 99002 Power Generation
AFM 99024 Hydroelectric 99017
EDXRF 99001, 99002, 99141, 99147, 99148 Railroad 99107, 99113
EXAFS 99128 Vehicles 99107
FTIR 99001, 99002, 99096 Wear and Failure
Raman 99001, 99002, 99096 Corrosion 99137
Coatings and Films 99004, 99015, 99024, 99030, 99034, 99044, 99046 Fatigue 99011, 99020, 99032, 99037, 99051, 99065, 99078, 99103, 99120,
99060 99134, 99135
Friction-Reducing Coatings 99024, 99027 Crack Propagation 99037, 99078
Wear-Resistant Coatings 99024, 99027 Rolling-Contact 99011, 99020, 99032, 99037, 99051, 99065, 99078,
Hardness 99065 99103, 99120, 99134, 99135, 99152
Metallurgical Analysis 99016 Fretting 99049, 99088, 99126
Surface Modification 99065, 99078, 99080 Galling 99114
Carburizing 99078 Scoring, Scuffing 99097, 99141, 99146, 99152
Nitriding 99065 Wear
see also Metalworking Boundary Lubricated 99013, 99041, 99061, 99069, 99079, 99080,
Surface Roughness 99016, 99048, 99049, 99051, 99054, 99058, 99059 99096, 99097, 99101, 99108, 99117, 99136, 99140, 99141, 99146
99075, 99083, 99085, 99098 Self-Lubricated 99076
Analysis and Models 99058, 99059, 99075, 99085, 99098 Solid Lubricated 99021, 99077, 99082
Measurement Methods 99054 Unlubricated 99003
Tribology of Equipment Wear Mechanisms 99069, 99080, 99088, 99126
Bearings—see Bearings Abrasive 99080, 99109
Cams 99097 Adhesive 99009, 99010, 99026, 99114
Dampers 99095 Corrosive 99126
Electrical Equipment 99133 Delamination 99080
Gas Turbines 99101 Wear Particle Analysis 99147, 99148, 99149
Gears 99011, 99020, 99051, 99058, 99065, 99074, 99078, 99081, 99131 Wear/Failure Testing Devices 99009, 99010, 99026
99152 Bench Tests 99009, 99010, 99026, 99069, 99088, 99134, 99141,
Helical Gears 99074, 99081 99146, 99152
Open Gears 99131 Equipment Tests
Spur Gears 99011, 99020, 99051 see also Maintenance
Hydraulic Components 99056, 99140
1999 Author Index
Adam, J 99048
Aggarwal, |.D 99150
Anderson, D.P. ; 99149
Anderson, W 99104
Arnsek, A. 99141
Asadauskas, S 99111
Barber, G.C. .... 99058
_ eee 99038
Barrett, L.E. 99033
MIR acsccsaveciinncsnses 99022
Benoy, P.A. ........... 99044 EERIE ERE ee See een eS hor eee ;
Ee, See : 99110 Conny, TF. escis.ss0s. :
Bercea, M. ........ 99110 Conway, J.C.uJr. .....
Berdichevsky, A.L. .... : 99072 Cornaby, D
Bertrand, P.A. ..... , ........ 99036, 99100 Cromwell, E.F. .
Sn 99053 Crysler, D. ...........
Bhatia, S. ........... 2 : ; 99128 RA UREN, Sscsinassensssacscavecsssncescsss
Billington, S. ....... sin 99050 CRIN INNS on ssescecessescssesesoensnseace a “
Blanchet, T.A. .... ; : 99076 NNT TIIS se nisin tk ec exten caiiceguida ash moviaspannacusisnsssicesedeabaoniSahSlansisaxnenkesas 99107,
Bowman, W.F. ........... : , 99132
Te 99006
ErOemeyn, L.A. .....0<:.0s000. cencsteceanaes 99099 D
NN cicscccksccasoncnsnsscesne ; 99150
Burroughs, B.R. .................. pasansexaysocansiee 99076 I ca ahaa als casa Sasiasienc ecg cs ca coh ao deams pecase pogssicuohanesaetae
PRUNE OD, winciscsesaccoxciacs 99129 Daoudal, B......
Dareing, D.W. .
De Baets, P. .......
De Choudhury, P. .
RNIN sccinscccansenicascsveresns De Vries, M.S. ..
Deckman, D.E J
Dekoven, B.M
Delfort, B... oh EEE Settee ORC ee ee SI ATOR ee REE ea Ee 99105
DellaCorte, C Jansen, M. J. ............0...
Deneuville, P. Januszkiewicz, K.R. ........
Diaz, S.E PATRIA, B.....0rsccescsscceess
Dobereiner, R Jaworski, J....
Dérfel, | Jesh, M.S......
Duda, J.L , 99146 Jhon, M.S. ....
Jiaa, C.L. ..
Jiao, H. .....
Jisheng, E....
Johnson, B...
Ejima, Y. 99096
Erdemir, A
Erhan, S
Ertas, A.
Etsion, |
Evans, H.P.
Ewing, K.J
Ezugwu, E.O
Fellenstein, J.A 99044
Ferguson, J.H .. 99017 Kempinski, R. .
Fischer, D.A 99128 Kharrat, M. ......
Flack, R.D , 99090
Forster, N , 99002
Francisco, M.M 99116
Freimanis, | .. 99138
Friedrich,K 99059 Kitahara, T. ..
Fu, L.. 99127 Klaus, E.E. ...
Fu, R.-F --- 99083 Kletzli, D.B. .....
Fujii,K .-.. 99101 Kligerman, Y.
Fujii,Y .--. 99101 IIE oie Sos eyes casead seanecannadeaietihiaannpiceniait nslis Nnooiiacabaunbaaincnsiaongae l
Furey, M , 99115 Korcek, S. ....... PO
Kountanya, R.. = ~ schdehaaieho steitis Tien
I cae sssuscn cceinccscnnboanisibihncnnsiadbautoulesiaediuccadtiet Uaencessounsssiaasdhedniiese e
eata a Se Ee eR ee eC
Gates, R.S Krichen, A. .....
Gatto, V. J Krupka, I. .......
Gawne, D.T.
Godfrey, D
Green, |
Grina, M.A
Gschwender, L.J
Gunsel, S
Gururajan, K I PTI asc shapelea esacd Rb etiic bsscas a aoe
Guu, Y.Y. Lai, J.-H. ........
BI IIR siisiassnosen
Lau, H.C.H........
rs | pi paitanlinienias —
Haizuka, S , 99081 IIT aah) cis scsi Pepta Sa aacbiceeneaaeniaiet yekengcciaicaaieaanrixae mcmeasnhéelsi e
Halperin, G 99066 IIIb int cooks cana selcsdaaoaesendacodmuanseenusuninaenssd kchesnomessseeiaemmeiae
Han, D.. 99117 Leveille, A.R. ....
Hartl, M , 99047
Hasegawa, S 99035 TI Sian eis uia phe deen dorb o ssRapreabadcs labc etacean pAb nkcbeasea bop aenceetabacia ies
Hashimoto, H 99093 NAc "textes ceasisedsalabiash oan dsapodeccesiobiopisdian eciaiiabiaacl daau anesaniekeunsincabeeciealGiaiaatd
Heenan, D-F. . 99153 Liang, J.C. .
Helmsetter, A 99151 Liang, S. ....
Hemmi, M 99118 Lin, C. .
Hendriks, F. , 99086
Herrera-Fierro, P , 99096
Hershman, S. 99088
Heshmat, C.A 99082
Heshmat, H 99082
Hilton, M.R 99135
Hirata, M 99101
Hohn, B.-R 99152
Holt, C.A 99005
Hopper, D.A 99057
Houpert, L. .. 99018
Howard, S.A. , 99102
Hsu, D.A. .. 99128 TS ne ee ee Re REN Ce PR senssoens EE
Hsu, S.M. .. 99092 ee .. 99101
o hs 99058 I II aa snscsisvesnhsssnrunensdensebishecteekaiiunansisanaamnesnnduiseesescbensseenabalias 99137
i, Le 99068 ada aah aise ionandainiisasadiionicsicanadaaiigmeaisipaeaniisai alsieodshhlesia d . 99016
Huang, T.-K... 99154 Man, L. sa ptasceedseecenan
Humphrey, G.R. .....
, 99148 Masuko, M. ...... as cissianiieial , 99117
Hunziker, H.E. 99057 canseit ias aa anean sid pbeslaniel 99021
Hutching, I. ..... 99109 SII IRIB: sccnsescesisinsacsksotessnsisananca un A
Medley, J.B. ..... shia easulabaeeeekaiiencs aan
Merati, P. .......... iiion wAS es
Michaelis, K. .... 99152
a an Mikulan, K.M. ... scyusseigiasiedepcuanciove a
Iskandar, K. ..... Miller, J.L. .....
Sener REE A Ae ee rere Genre RNR RRS ORR e See ee Rename 99024
III as cischancchatssassnsncsseuressescs ; a a eas ge le aac epee 99062, 99073, 99106
Morgan, T.A. I Sc das csdss tao acaasnas tgcasdunduanechenieqeiesionsaovneacsoetnbsee s +. 99132
Mori, A. ..... 6 assashase assssncinecaicatisices edlaceenbeqeduagendesaseds vabo la umecaakioase 99150
Mosieh, M. ; ieiaatinoietin 9 Stiver tll, D.H. ... écehandstnehikcsascamee
Stockwell, R.T. .. LE
ai a i alate cautai a abs aca ean gkkcoca causes 99153
I ccc Fes asssv enience aie busis ocsuaooapubanscneiecukk ia 99136
I ak cahatascrccnsinsntescncste isos : 99057 Suh, N.P. .... .- 99064
Naka, M. ......... : Lcaltnbawraeeaeit 99021 Sui, P.C. .. <Oubbbbatsakieskgpissesamsanienneenae
EIRES n e eer enka 99051 III aascancccapeasnnscnvxenesie seancdsecsnbepiedicssapeubebnisbicchacsuvenechan : . 99042
ag AE en vee 99011, 99020, 99074, 99081 t
Néder, Z. ...... : Ei eateaslianies 99059
Nélias, D. ..... . 99031, 99103, 99110
isd ccoccentncnsdaensonien sssseee. 99138, 99139 RD,en o ae , 99128
INI vnassnsniccsssscoscsssscssasneccoe awa 99125 PRI ia iat casanc mic aiticecioincn sondessenonsuactaen .. 99032
Nikolajsen, J.L. ss sessseeeeeeeee 99008, 99025 Talmage, G. .. 99084
Nosaka, M. ..... tea peiakavens sseeeseeeee 99015, 99035 Tamenaga, J. .......... are , 99020
PON Ts sasoiceonccecctnascnsacabecnconne " ‘ 99022 Bn . ear = 99027
MIG is ltnrenecossossasonsiciennsuaodanni nisicbkabiceweseeetianan
18) WO Mv esteinssce 99052
Tsukruk, V.V. . 99024
I adios saticabccsnasiivcdsbicdbenscuneenns . 99093 Tumoas, R. ... 99129
III oo Siscasiassnssvecscdctnecascancsansadaesesanns sananau 99035 Tyndall, G.W. 99060
Ojmertz, K.M.C. . aeons siesntcabonstece 99061
Okeke, C.I.......... ets . 99046
I iss ca ssa sasnpanogebnkpinenias panaecnaeae 99094
ao ctsaicari ncaa pcaanaciccasiseeseesie Seeker = 99078 iS asic cecsstcueuisa saliceios cabled apxasonasbenentertscuuta 99144, 99145
Onopchenko, A. . res 99116
oS: Saeeeere =! zestcciniescobacsil 99110 Vv
Oskarson, H.-B. . sins ‘“ 99061
MII Ee osicccevakanescnesnsssscincaivennsonce x ; scsi shuasenn 99084 i i al 99009, 99010
Van Geetruyen, C.. , 99010
Seach cca ae neds askewo mauwagsnen sons cspcaavaiidaelea Gaiden goRORONSS 99059
ibs oak cosa sd akaG a ct scoulbtdstiicep. cane ate Aaoua cana selina 99137
issey on c snionc abanas — heaton 99135 Vick, B....... 99115
Pecht, G.G. .... acetate 99139 Ville, F. ...... , 99103
Perettie, D.J.. . ’ atatead 27, 99128 Vizintin, J. REL OTR sanaianensi oe 99141
Perez, J.M. .... : a ; , 99146
Pettinato, B. ... oe ass nkusinitabiaasel 71, 99087 Ww
Poliscuk, R. ...... ssi ste costae cingtamasavauiaieeannien 99039
Polyshchuk, V. .. ee 99006 I airs coc oredcachaasvese ceedinsnkahwmtussueoemasvo cs
Poslowski, A.K. . RR SO Te 99041
a Se pasbarerancbbnnnebiniinake 99113
Prakash, J... siisiediles ceeaaes iemnnmaateics 99085
99133
Wang,
Wang,
Wang,
Ward, P.C oe
Ns Biacartas trans ns niiccniscaksenansncbsesiasstsasichaseybcks-cnsadtasbescesieasscesoate
Weller, D.E.Jr.
RRaamnaskoumr,m aDr.,L . S.... ... Grice ccadatatiammeedece |Wen , S. e..sceesen ee
Ratoi, M. ........... I, UD. oc ccccccscnncosncenesessens
Rizvi, S. Q. A. ...... PI REE occ occcscsccensennsonssis
Rodkiewicz, C.M. Wilkinson, C.M.R. . caasaouns , 99078
| a , 99010
Russell, J. Wilson, W. R.D. .... ae . 99019
Winoto, S.H. ...... : 99056
Witelski, T.P. ... , 99086
Witke, K. ..... 99003
Wojcicki, R. . . 99136
Womack, K. 99054
Woydt, M. ...... 99003
NN sce senccs saa ns snnecsaiankcsacd ces baxpadphianpmncockenavones 99028, 99033
ooh nas ks Cewaccnaccouebsoasoscbanesutedesdh : Y
Sarpal, A.S. ..... St 9
Sasaki, A.......... I ecco csacarescivcanisansasasinarsucns oudeaniniossicsiats ats 99116
Schenach, T.A. ... stsies . I i nns6s5) cecscisachancnssneasanesnecsct 99101
Schmid, S.R. ......... Yamamoto, T..... - ‘ , 99145
Schreiber, B.F. .... Yamanaka, T. .
Segall, A.E. ..
Segar, P.R....
Sharif, K.J. H. .. ing, T.N. .... . 99067, 99092
Sharma, S.K. ... NN rh ca slice Sas acegsclaanccksaksibbucssunetaswiaraeineseusedactieel 99017
Shogrin, B.A. ... z
Shuster, M. .....
Skeldon, P.... Ugo a, «cua cudicamva tenon Sonsosienscienasisusba Rites 99120
Skoop, A. ..... ;
Smeeth, M. .....
Snidle, R.W.,....
Snyder, C.E.uJr. ..
oSgens oa asc nc cangstnon¥eucece suep sacsbRdauniinesnon sarsucswnssees 99097
“
~~
’
*
bid
*
~~ &