TMS 2016 145th Annual Meeting & Exhibition: Supplemental Proceedings

774 Pages·2016·51.57 MB·English

by  The Minerals

SUPPLEMENTAL
PROCEEDINGS
FEBRUARY 14-18
DOWNTOWN NASHVILLE,
TENNESSEE MUSIC CITY CENTER
New proceedings volumes
from the TMS2016 Annual Meeting:
• 7th International Symposium on High-Temperature
Metallurgical Processing
• CFD Modeling and Simulation in Materials Processing 2016
• Characterization of Minerals, Metals, and Materials 2016
• Energy Technology 2016: Carbon Dioxide Management
and Other Technologies
• EPD Congress 2016
• Light Metals 2016
• Magnesium Technology 2016
• Rare Metal Technology 2016
• REWAS 2016
• Shape Casting: 6th International Symposium
• TMS 2016 Supplemental Proceedings
SUPPLEMENTAL
PROCEEDINGS
Editor
The Minerals, Metals & Materials Society
ISBN 978-3-319-48624-6 ISBN 978-3-319-48254-5 (eBook)
DOI 10.1007/978-3-319-48254-5
Chemistry and Materials Science: Professional
Copyright © 2016 by The Minerals, Metals & Materials Society
Published by Springer International Publishers, Switzerland, 2016
Reprint of the original edition published by John Wiley & Sons, Inc., 2016, 978-1-119-22583-6
This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or
part of the material is concerned, specifically the rights of translation, reprinting, reuse of
illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way,
and transmission or information storage and retrieval, electronic adaptation, computer software,
or by similar or dissimilar methodology now known or hereafter developed.
The use of general descriptive names, registered names, trademarks, service marks, etc. in this
publication does not imply, even in the absence of a specific statement, that such names are
exempt from the relevant protective laws and regulations and therefore free for general use.
The publisher, the authors and the editors are safe to assume that the advice and information in
this book are believed to be true and accurate at the date of publication. Neither the publisher nor
the authors or the editors give a warranty, express or implied, with respect to the material
contained herein or for any errors or omissions that may have been made.
Printed on acid-free paper
This Springer imprint is published by Springer Nature
The registered company is Springer International Publishing AG
The registered company address is: Gewerbestrasse 11,6330 Cham, Switzerland
TABLE OF CONTENTS
TMS 2016 Supplemental Proceedings
Edited Proceedings
Additive Forming of Components - Tailoring
Specific Material Properties in Low Volume
Production
Anisotropic Mechanical Properties in a Big-Sized Ti-6Al-4V Plate
Fabricated by Electron Beam Melting ................................................................. 5
Pan Wang, Mui Ling Sharon Nai, Xipeng Tan, Wai Jack Sin,
Shu Beng Tor, and Jun Wei
Characterization of Microstructure and Mechanical Properties of Direct
Metal Laser Sintered 15-5 PH1 Stainless Steel Powders and Components ....... 13
Jing Zhang, Yi Zhang, Xingye Guo, Weng Hoh Lee, Bin Hu, Zhe Lu,
Yeon-Gil Jung, and Je-Hyun Lee
Materials Research in Reduced Gravity
Effect of Thermal Drift on the Initial Transient Behavior in Directional
Solidification of a Bulk Transparent Model Alloy ............................................ 23
F.L. Mota, N. Bergeon, D. Tourret, A. Karma, R. Trivedi, and
B. Billia
Rapid Quench in an Electrostatic Levitator ....................................................... 31
Michael P. SanSoucie, Jan R. Rogers, and Douglas M. Matson
Simulation of Shrinkage-Induced Macrosegregation in a Multicomponent
Alloy during Reduced-Gravity Solidification .................................................... 35
Ali Saad, Charles-André Gandin, Michel Bellet, Thomas Volkmann,
and Dieter Herlach
In Situ Investigation of the Effects of Gravity Level Variations on the
Directional Solidification Microstructures during Parabolic Flights ................. 43
L. Abou-Khalil , G. Salloum-Abou-Jaoude, G. Reinhart,
C. Pickmann, G. Zimmermann, Y. Houltz, J. Li, O. Janson, and
H. Nguyen-Thi
Microstructural Evolution in Undercooled Al–8wt%Fe Melts .......................... 51
J. Valloton, A.A. Bogno, J. Chen, R. Lengsdorf, H. Henein,
D.M. Herlach, U. Dahlborg, and M. Calvo-Dahlborg
v
Metal and Polymer Matrix Composites II

Degradation Study of High Melt Strength Polypropylene/Clay
Nanocomposites in Environmental and Accelerated Conditions ....................... 61
Luiz Gustavo Hiroki Komatsu, Duclerc Fernandes Parra,
Washington Luiz Oliani, Ademar Benevolo Lugao, and
Vijaya Kumar Rangari

Nanotube Sheet - Graphite Hybrid Nanocomposite for Damage Detection ...... 69
Jiukun Li and Sirish Namilae

Effect of Nano-Particle Addition on Grain Structure Evolution of Friction
Stir Processed Al 6061 during Post-Weld Annealing ........................................ 77
Guo Junfeng, Lee Bing Yang, Du Zhenglin, Bi Guijun,
Tan Ming Jen, and Wei Jun

Enhanced Ductility with Significant Increase in Strength of As-Cast
CNTs/AZ91D Nanocomposites ......................................................................... 85
Rongyu Feng, Lin Zhu, and Wenzhen Li

The Synthesis and Processing Self-Healing Structural Al/Mg Lamellar
Composite Materials .......................................................................................... 93
Yasser Fouad and Bakr Mohamed Rabeeh

Filler Surface Nature, Bead, Solution Viscosity and Fibre Diameter of
Electrospun Particle-Reinforced Polylactide ................................................... 101
S.O. Adeosun, E.I. Akpan, O.P. Gbenebor, A.A. Peter, and
S.A. Olaleye

Evaluation of Intermetallic Reaction Layer Formation within Steel
Encapsulated Metal Matrix Composites .......................................................... 109
Sean Fudger, Eric Klier, Prashant Karandikar, and Chaoying Ni

Effect of Load and Grit Size on High Stress Abrasive Wear of Al-Mg-Si
Hybrid Composites .......................................................................................... 119
N.Ch. Kaushik and R. Narasimha Rao

The Corrosion of 30% Mo-ZrO Cermet in Molten Slag of
CaO-MgOMgO-Al O .................................................................................... 127
Xiaopeng Li, Ziming W₂ang, Yang Yang, Yanling Guo,
Jieyu Zhan₂g, ₃and Wende Dan

vi
Study on Mechanical Property of Porous Titanium by Adding Powder
Carbon ............................................................................................................. 135
Guibao Qiu, Hao Cui, Tengfei Lu, Yilong Liao, and Yang Yang

Fabrication of Gamma-Irradiated Polypropylene and AgNPs
Nanocomposite Films and Their Antimicrobial Activity ................................. 143
Isabelle Oliveira Berenguer, Washington Luiz Oliani, Duclerc
Fernandes Parra, Luiz Gustavo Hiroki Komatsu,
Vinicius Juvino dos Santos, Nilton Lincopan,
Ademar Benevolo Lugao, and Vijaya Kumar Rangari

Natural Aging Effects in HMS-Polypropylene Synthesized by Gamma
Radiation in Acetylene Atmosphere ................................................................ 151
Washington Luiz Oliani, Luiz Gustavo Hiroki Komatsu,
Ademar Benevolo Lugao, Vijaya Kumar Rangari, and
Duclerc Fernandes Parra

Superaligned Carbon Nanotubes Reinforced Copper Nanocomposites with
Enhanced Strength and Electrical Conductivity .............................................. 159
Jing Shuai, Yu Jin, Lin Zhu, and Wenzhen Li

Unedited Proceedings

Additive Manufacturing: Building the Pathway
towards Process and Material Qualification

Selective Laser Melting of TiB /H13 Steel Bulk Nanocomposites:
Influence of Nanoscale Reinforcment ............................................................. 171
B. Almangour, Darius₂z Grzesiak, and J.M. Yang

In-Space Manufacturing Baseline Property Development ............................... 177
Tom Stockman, Judith Schneider, Tracie Prater, Quincy Bean,
and Nicki Werkheiser

Using Powder Cored Tubular Wire Technology to Enhance Electron
Beam Freeform Fabricated Structures ............................................................. 183
Devon Gonzales, Stephen Liu, Marcia Domack, and Robert Hafley

Microstructure Evolution of Martensitic Stainless Steel in Laser Hot Wire
Cladding with Multiple Heating Passes ........................................................... 191
Shaopeng Wei, Gang Wang, Zhenguo Nie, Zilin Huang, and
Yiming Rong
vii
Effect of Printing Orientation on Strength of 3D Printed ABS Plastics .......... 199
Linlin Cai, Philip Byrd, Hanyin Zhang, Kate Schlarman,
Yi Zhang, Michael Golub, and Jing Zhang
Verification of Numerically Calculated Cooling Rates of Powder Bed
Additive Manufacturing ................................................................................... 205
H.-W. Mindt, M. Megahed, N.P. Lavery, A. Giordimaina, and
S.G.R. Brown
Advanced Materials in Dental and Orthopedic
Applications
Beta-Type Titanium Alloys for Use as Rods in Spinal Fixation Devices ........ 215
Mitsuo Niinomi, Masaaki Nakai, Huihong Liu, and Kengo Narita
Effect of MMT Nanoparticle Clay on Flexural Properties of Polymer
Based BisGMA/TEGDMA Resin .................................................................... 223
Duclerc Parra, Luiza Campos, Letícia Boaro, Henrique Ferreira,
Ademar Lugão, and Vijaya Rangari
Fatigue Performance of New Developed Biomedical Ti-15Mo Alloy with
Surface Modified by TiO Nanotubes Formation ............................................ 231
Nilson T.C. Oliveira, Leonardo C. Campanelli,
Carolina C. Bort₂olan, and Claudemiro Bolfarini
Computational Materials Discovery and
Optimization: From 2D to Bulk Materials
First Principles Investigation on TiAl₃ Alloys Substitutively Doped with
Si ...................................................................................................................... 239
Qing Du, WeiDong Hu, WangJun Peng, GuangXin Wu,
WenDe Dan, and JieYu Zhang
Effect of Strain on the Physical Properties of Lanthanum Nickelate ............... 247
D. Misra, T.K. Kundu, and Ankit
Hydrogen-Induced Core Structures Change of Screw and Edge
Dislocations in Tungsten ................................................................................. 253
Yinan Wang, Chengliang Li, Ben Xu, and Wei Liu
viii
Computational Materials Engineering for
Nuclear Reactor Applications
Validation of BISON Calculation of Hydrogen Distribution by
Comparison to Experiment .............................................................................. 263
Evrard Lacroix and Arthur Motta
Computational Methods for Uncertainty
Quantification, Model Validation, and
Stochastic Predictions
Effect of K-Point Convergence on Derived Properties for Pure Crystals ........ 275
Thomas C. Allison
Quantifying Model-Form Uncertainty in Molecular Dynamics Simulation .... 283
Anh V. Tran and Yan Wang
Atomistic Study of Carbon Nanotubes: Effect of Cut-Off Distance ................ 293
S. Thamaraikannan and S.C. Pradhan
Bayesian Calibration of a Physical Model for Plastic Flow Behavior of
TRIP Steels ...................................................................................................... 301
P. Honarmandi and R. Arroyave
Computational Thermodynamics and Kinetics
Homogeneous Nucleation and Inner Structure Evolution in Nucleus Fe
from Classic Molecular Dynamics Simulation ................................................ 319
Jie Luo, Junjiang Xiao, and Yongquan Wu
Anisotropy of Crystal-Melt Interface of BCC-Fe and FCC-Fe from Molecular
Dynamics Simulation ....................................................................................... 327
Linlin Lv, Yewei Jiang, Yongquan Wu, and Junjiang Xiao
Thermal Decomposition Kinetics of Manganese Carbonate in the Process
of MnZn Ferrite Preparation ............................................................................ 335
Lin Wang, Yan-hong Li, Jin-lin Lu, Wei Xu, and Hui-long Lin
Solid-Liquid Phase Transitions of FCC-Al and HCP-Mg Nanoparticles ........ 343
Yewei Jiang, Linlin Lv, and Yongquan Wu
ix