The drilling manual

739 Pages·2015·101.093 MB·English

by  ADITC – Australian Drilling Industry Training Committee Limited

K10727_FM.indd 2 3/9/15 3:35 PM
Fifth Edition
DRILLING
THE

M ANUAL
K10727_FM.indd 1 3/9/15 3:35 PM
K10727_FM.indd 2 3/9/15 3:35 PM
Fifth Edition
DRILLING
THE

M ANUAL
Boca Raton London New York
CRC Press is an imprint of the
Taylor & Francis Group, an informa business
K10727_FM.indd 3 3/9/15 3:35 PM
Cover image credits:
·         Driller at work:  image courtesy of Go Drill Pty Ltd, A. Carlon.    
·         Casing with screens:  image courtesy of Southern Rural Water.
CRC Press
Taylor & Francis Group
6000 Broken Sound Parkway NW, Suite 300
Boca Raton, FL 33487-2742
© 2015 by ADITC – Australian Drilling Industry Training Committee Limited
CRC Press is an imprint of Taylor & Francis Group, an Informa business
No claim to original U.S. Government works
Version Date: 20150309
International Standard Book Number-13: 978-1-4398-1421-5 (eBook - PDF)
This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been made to publish reliable data and
information, but the author and publisher cannot assume responsibility for the validity of all materials or the consequences of their use. The authors and
publishers have attempted to trace the copyright holders of all material reproduced in this publication and apologize to copyright holders if permission
to publish in this form has not been obtained. If any copyright material has not been acknowledged please write and let us know so we may rectify in any
future reprint.
Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic,
mechanical, or other means, now known or hereafter invented, including photocopying, microfilming, and recording, or in any information storage or
retrieval system, without written permission from the publishers.
For permission to photocopy or use material electronically from this work, please access www.copyright.com (http://www.copyright.com/) or contact
the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a not-for-profit organization that provides
licenses and registration for a variety of users. For organizations that have been granted a photocopy license by the CCC, a separate system of payment
has been arranged.
Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation
without intent to infringe.
Visit the Taylor & Francis Web site at
http://www.taylorandfrancis.com
and the CRC Press Web site at
http://www.crcpress.com
Foreword
The Australian Drilling Industry Training Committee Ltd (ADITC) presents the Drilling Manual.
We hope that we have done some justice to the depth of expertise, and pride in excellence of work
demonstrated daily by contractors, organisations, and individuals in the drilling industry.
Where the information comes from
Much of the information in this new manual was earlier published as Drilling, the Manual of
Methods, Applications and Management, and has been included here after it has been extensively
revised. This publication also draws on the Australian Drilling Manual, and the Australian Driller’s
Guide. We acknowledge the contribution of the past ADITC publications that have provided a
continuous resource to the industry since 1981.
The Drilling Manual draws on current good industry practice and on current and forward
technology, with direct input from industry personnel. To achieve this, we have consulted
industry members whose knowledge is recognised in the industry, rather than relying exclusively
on academic references. Both these sources have value and, as in any industry, both make a
significant contribution to good industry practice. It is also the reason that the style of writing varies
across the Drilling Manual. We have made thorough and best efforts to be accurate and fair, and to
acknowledge all sources of information.
Who the Drilling Manual is intended for
This manual will be useful to members of the drilling industry, from owner–operators to large
contractors, and also to people who simply want to know about the industry. We aim to provide
reference information about ‘what’, ‘how’, and also ‘why’. (This publication does not deal with
offshore oil and gas drilling.)
Our aim is to provide a reference work for the drilling industry in Australia and throughout
the world, with a reasonably deep level of information. The drilling industry covers a wide
range of sectors and applications. Drilling occurs in all nations around the world, and in the seas
surrounding those nations. Throughout the world there is a vast range of industry practice. For
these reasons some historical information has been retained, even though current industry practice
in Australia has now changed.
We thank …
ADITC most sincerely thanks the many industry contributors – companies and individuals – who
have provided review, information, photos, updated practice, and new technological information.
We also thank the companies and individuals who have provided sponsorship.
We thank the Committee members without whose expertise, insight, and overview this complex
review and final publication could not have been achieved. We particularly thank ADITC’s drilling
technical editor, Mr Max King, for his knowledge, writing, and research.
Virginia Hilliard
Chair of the Industry Advisory Reviewing Committee
Chief Executive Officer, Australian Drilling Industry Training Committee Ltd
Acknowledgments
Industry Steering Committee
Kerry Brydon Lucas Drilling
Leigh Davies Geotechnical Drilling Engineers
Virginia Hilliard, Chair Australian Drilling Industry Training Committee Ltd
Peter Kank Boart Longyear
Bruce Keogh Department of Natural Resources and Mines, Queensland
Ross Raymond
Gordon Stewart Globaltech Corporation Pty Ltd
Technical editor: Robert Maxwell (Max) King, MIEAust, CPEng
Major contributors DDH1 Drilling Pty Ltd – Murray Pollock
Age Developments – Robert Peters Foraco Australia – Paul Allen
Atlas Copco Geotechnical Drilling Engineers – Leigh Davies
Ausdrill – Mick Crocker Globaltech Corporation – Gordon Stewart, Ben Ameri,
Australian Drilling Industry Training Committee Ltd Tony Harmon, Raymond Hill, Brett Wilkinson
– Virginia Hilliard JK Boyles
Barrick Gold – Daniel Holmes, Robbie Rowe LKAB Wassara AB Waterhammers – Stefan Swartling
Boart Longyear Lucas Drilling – Kerry Brydon
Bosch Rexroth National Ground Water Association (USA)
Budd Drilling – Sue Rowlings Rob Lait and Associates – Rob Lait
Contact Energy – Ralph Winmill Max King
Compile Ryobi – Luke Martin, Steve Hedges Sandvik
CR Kennedy Survey Solutions Pty Ltd Snap-on Tools – Peter Marinovic
Department of Natural Resources and Mines, SonicSampDrill – Huug Eijlkamp
Queensland – Bruce Keogh Trenchless Advisor – Peter Brown
Ditchwitch – Stewart Brown Vermeer
The Australian Drilling Industry Association (ADIA) The New Zealand Drillers’ Federation (NZDF)
is pleased to formally endorse the Drilling Manual is pleased to formally endorse the Drilling Manual and
as a resource and reference for the strongly recommend its use as a resource and a valuable
Australian drilling industry. training tool for the New Zealand drilling industry.
Environmental, Geotechnical, Minerals, Sonic,
Diamond Core, Hammer, Auger, Probe
www.stardrilling.com.au Phone: [phone]
Hagstrom Drilling
hagstromdrilling.com.au Phone: [phone]
Specialist geotechnical, environmental, and cone penetration testing
contractor, with extensive land and marine project experience
Cairns Drilling Contractors Pty Ltd
Contact Michael (Mick) Bacon Mobile: [phone]
Email: [email protected] www.cairnsdrill.com.au
Specialist in geotechnical drilling, with extensive overwater experience.
ADITC is the author of this manual, and is proud to have served
the drilling industry for more than 30 years with technical and training
advice, industry training, and national Australian qualifications.
CONTACT US
PO Box 742, Lane Cove NSW 2061 Australia
Phone: [phone] International: [phone]
Email: [email protected] Website: www.aditc.com.au
Proudly supporting the ADITC and the production
of this Drilling Manual

• Serving the drilling industry since 1983
• Exploration and waterwell drilling
• Sale of new and used drilling equipment
• Licensed auctioneers and valuers (LC No. 18438)
Davies International has been supplying Australia, New Zealand, Asia, and the rest of the
international market with quality drilling and engineering products consistently since 1983.
We are a leading Australian company dedicated to providing quality service and drilling
and mining equipment to our customers on an international scale.
We buy, sell, and carry stock of all types of drilling, mining machinery, and equipment,
including pre-owned diamond drilling rigs, underground equipment, and water boring rigs, as
well as a large range of new equipment sourced from manufacturers in Australia, Korea, and
America.
We have an extensive range of new and used drilling equipment for sale. Our inventory
of trucks, machinery, mud pumps, compressors, and other drilling equipment is constantly
turning over.
Proprietor and Founder: Leigh Davies
Davies International is based in Perth, Western Australia,
with branch offices in Brisbane, Queensland, and Dallas, Texas.
Phone: [phone] International: [phone]
www.daviesinternational.com.au