Surface Modification of Biopolymers

468 Pages·2015·8.828 MB·English

by  Vijay Kumar Thakur, Amar Singh Singha

Surface Modification of BiopolyMerS

Surface
Modification
of BiopolyMerS
Edited by
Vijay kuMar thakur and aMar Singh Singha
Copyright © 2015 by John Wiley & Sons, Inc. All rights reserved
Published by John Wiley & Sons, Inc., Hoboken, New Jersey
Published simultaneously in Canada
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, scanning, or
otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright
Act, without either the prior written permission of the Publisher, or authorization through
payment of the appropriate per‐copy fee to the Copyright Clearance Center, Inc., 222
Rosewood Drive, Danvers, MA 01923, (978) 750‐8400, fax (978) 750‐4470, or on the web at
www.copyright.com. Requests to the Publisher for permission should be addressed to the
Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030,
(201) 748‐6011, fax (201) 748‐6008, or online at http://www.wiley.com/go/permissions.
Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their
best efforts in preparing this book, they make no representations or warranties with respect to
the accuracy or completeness of the contents of this book and specifically disclaim any
implied warranties of merchantability or fitness for a particular purpose. No warranty may be
created or extended by sales representatives or written sales materials. The advice and
strategies contained herein may not be suitable for your situation. You should consult with a
professional where appropriate. Neither the publisher nor author shall be liable for any loss
of profit or any other commercial damages, including but not limited to special, incidental,
consequential, or other damages.
For general information on our other products and services or for technical support, please
contact our Customer Care Department within the United States at (800) 762‐2974, outside
the United States at (317) 572‐3993 or fax (317) 572‐4002.
Wiley also publishes its books in a variety of electronic formats. Some content that appears
in print may not be available in electronic formats. For more information about Wiley
products, visit our web site at www.wiley.com.
Library of Congress Cataloging‐in‐Publication Data:
Surface modification of biopolymers / edited by Vijay Kumar Thakur, Amar Singh Singha. – 1
pages cm
Includes index.
ISBN 978-1-118-66955-6 (hardback)
1. Biopolymers. I. Thakur, Vijay Kumar, editor. II. Singha, Amar Singh, editor.
QP801.B69S87 2015
572′.33–dc23
2014042903
Printed in the United States of America
10 9 8 7 6 5 4 3 2 1
COnTEnTS
List of Contributors vii
Preface xi
1 Surface Modification of Biopolymers: An Overview 1
Manju Kumari Thakur, Ashvinder Kumar Rana, Yang Liping,
Amar Singh Singha, and Vijay Kumar Thakur
2 Surface Modification of Chitosan and its Implications
in Tissue Engineering and Drug Delivery 20
Dilip Depan and Raj Pal Singh
3 Microwave‐Irradiated Synthesis of Agar‐Based Graft Copolymers:
Analytical Evidences, Biomedical and Environmental Applications 45
Sumit Mishra, Gautam Sen, and G. Usha Rani
4 Adaptation of Biopolymers to Specific Applications 84
Cecilia I. Alvarez Igarzabal, Marisa Martinelli,Verónica Brunetti, and
Miriam C. Strumia
5 Modifications of Lignocellulose Fibers and its Application
in Adsorption of Heavy Metals from Aqueous Solution 113
Vicente de Oliveira Sousa Neto, Francisco Cláudio de Freitas Barros,
Diego de Quadros Melo, Paulo de Tarso C. Freire, Marcos Antônio
Araujo‐Silva, and Ronaldo Ferreira do Nascimento
6 Tailoring Surface Properties of Degradable
Poly(3‐Hydroxyalkanoates) for Biological Applications 150
Estelle Renard, Davy‐Louis Versace, Julien Babinot, and Valerie Langlois
v
vi CONTENTS
7 Physically and Chemically Modified Starches in Food
and non‐Food Industries 173
Małgorzata Kapelko‐Żeberska, Tomasz Zięba, and Akhilesh Vikram Singh
8 Polymer Modifications and Recent Technological Advances
toward Live Cell Encapsulation and Delivery 194
Paulomi Ghosh, Kausik Kapat, and Santanu Dhara
9 Surface Modification of natural Fibers for Reinforcement
in Polymeric Composites 224
Na Lu, Shubhashini Oza, and Morteza Ghaempanah Tajabadi
10 Surface Electroconductive Modification of Biopolymers 238
Hamidreza Barghi and Mohammad J. Taherzadeh
11 Surface Modification of Cellulose nanocrystals for 
nanocomposites 258
Jin Huang,, Youli Chen, and Peter R. Chang,
12 Biopolymer‐Based Stimuli‐Sensitive Functionalized Graft
Copolymers as Controlled Drug Delivery Systems 291
T.S. Anirudhan and S.R. Rejeena
13 nucleophile‐Induced Shift of Surface Plasmon Resonance
and its Implication in Chemistry 335
Anindita Roy and Tarasankar Pal
14 Surface Modification of natural Fiber Composites
and their Potential Applications 370
Moshibudi C. Khoathane, Emmanuel R. Sadiku, Chinenyeze S. Agwuncha
15 Effect of Surface Modification of natural Cellulosic Fibers on
the Dielectric and Mechanical Properties of Polymer Composites 401
Ashvinder Kumar Rana, Amar Singh Singha, Manju Kumari Thakur,
and Vijay Kumar Thakur
Index 419
LiST oF ConTRiBuToRS
Chinenyeze S. Agwuncha Department of Chemical, Metallurgical and Materials
Engineering, Faculty of Engineering and the Built Environment, Tshwane University of
Technology, Pretoria, South Africa
T.S. Anirudhan Department of Chemistry, University of Kerala, Kariavattom,
Trivandrum, India
Marcos Antônio Araujo‐Silva Department of Physical Chemistry, Federal University
of Ceará‐Brazil, Ceará, Brazil
Julien Babinot Institut de Chimie et des Matériaux Paris Est, UMR7182 CNRS,
Université Paris Est Créteil UPEC, Thiais, France
Hamidreza Barghi Swedish Centre for Resource Recovery, University of Borås,
Borås, Sweden
Verónica Brunetti Departamento de Fisicoquímica—INFIQC, Facultad de
Ciencias Químicas, Universidad Nacional de Córdoba, Córdoba, Argentina
Peter R. Chang BioProducts and Bioprocesses National Science Program,
Agriculture and Agri‐Food Canada, Saskatoon, Saskatchewan, Canada; Department of
Chemical and Biological Engineering, University of Saskatchewan, Saskatoon,
Saskatchewan, Canada
Youli Chen College of Chemistry, Chemical Engineering and Life Science, Wuhan
University of Technology, Wuhan, China
Francisco Cláudio de Freitas Barros Department of Analytical Chemistry and
Physical Chemistry, Federal University of Ceará‐Brazil, Ceará, Brazil
vii
viii LIST OF CONTRIBUTORS
Dilip Depan Biomaterials and Biomedical Engineering Research Laboratory,
Center for Structural and Functional Materials, University of Louisiana at Lafayette,
Lafayette, LA, USA
Santanu Dhara Biomaterials and Tissue Engineering Laboratory, School of Medical
Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur, West
Bengal, India
Paulo de Tarso C. Freire Department of Physical Chemistry, Federal University
of Ceará‐Brazil, Ceará, Brazil
Paulomi Ghosh Biomaterials and Tissue Engineering Laboratory, School of Medical
Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur, West
Bengal, India
Jin Huang College of Chemistry, Chemical Engineering and Life Science, Wuhan
University of Technology, Wuhan, China; State Key Laboratory of Pulp and Paper
Engineering, South China University of Technology, Guangzhou, China
Cecilia i. Alvarez igarzabal Departamento de Química Orgánica, Facultad
de Ciencias Químicas, Universidad Nacional de Córdoba, IMBIV, Córdoba,
Argentina
Kausik Kapat Biomaterials and Tissue Engineering Laboratory, School of Medical
Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur, West
Bengal, India
Moshibudi C. Khoathane Department of Chemical, Metallurgical and Materials
Engineering, Faculty of Engineering and the Built Environment, Tshwane University
of Technology, Pretoria, South Africa
Valerie Langlois Institut de Chimie et des Matériaux Paris Est, UMR7182 CNRS,
Université Paris Est Créteil UPEC, Thiais, France
Yang Liping Polymer Engineering and Catalysis, Institute of Chemical and
Engineering Sciences, Singapore, Singapore
na Lu Department of Engineering Technology, University of North Carolina at
Charlotte (UNCC), Charlotte, NC, USA
Małgorzata Kapelko‐Żeberska Department of Food Storage and Technology,
Wroclaw University of Environmental and Life Sciences, Wroclaw, Poland
Marisa Martinelli Departamento de Química Orgánica, Facultad de Ciencias
Químicas, Universidad Nacional de Córdoba, IMBIV, Córdoba, Argentina
Sumit Mishra Department of Applied Chemistry, Birla Institute of Technology,
Mesra, Ranchi, Jharkhand, India
Ronaldo Ferreira do nascimento Department of Analytical Chemistry and
Physical Chemistry, Federal University of Ceará‐Brazil, Ceará, Brazil