Siemens Above NEMA Price Guide

113 Pages·2006·1.26 MB·English

by  Siemens - Norwood

Pricing Guide for Horizontal
Above NEMA Motors – Rev. 0

s
www.sea.siemens.com/us/Products/Electric-Motors/
Section 1
Part RevRec

Page 1 of 1
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
Revision Record
Rev. No. Section Part Page Date Description
0 All All All 02/11 NEW

All information in this guide is subject to change without notice.
Rev. No. Approved: Title Date
0 (Joseph Moreland) Marketing Manager 2/1/2011
Section 1
Part General

Page 1
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
General Information
As one of the World’s leading provider of large motors with Global service and support second to none, Siemens
sells and manufactures a complete line of motors at the ISO-9001 Certified Norwood, OH plant. This 350,000
square foot facility has produced over 150,000 high voltage motors continuously since 1898. The Norwood
plant offers horizontal AC squirrel-cage induction motors through 18,000 horsepower and voltage ranges from
460 through 13200 volts. The plant also manufactures a complete line of vertical motors.

Larger induction motors as well as wound rotor and synchronous motors are also available from other Siemens
plants located in Germany.

The following pages covers horizontal induction motors through 5000HP. It is intended for use in pricing the
more common ratings, enclosures and modifications. Special features or applications which could affect frame
size and, therefore seriously impact cost and price, should be referred to factory for price and availability.
Ratings that fall outside those covered in this book, as well as all vertical motors, should also be referred to
factory for pricing and availability.

For additional information and updates of our products and services visit our website at

http://www.sea.siemens.com/us/products/electric-motors/Pages/Electric-Motors.aspx

and click on the “Large AC Above NEMA motors” link.

NOTE: This Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211 supersedes all previous
issues of the Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-xxxx and
ANPG-60000-xxxx.
Section 1
Part General

Page 2
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
General Information
All ratings in this price guide are designed for the following;
 Horizontal Mounting
 3 phase
 Class F insulation
 Service factor of 1.0
 Maximum temperature rise of 80 degrees C by resistance at 1.0 service factor
 Maximum 40 degrees C ambient
 Altitude of 3300 feet or less
 Direct connection to a typical centrifugal load with rated voltage and frequency applied at the
motor terminals and a load inertia value equal to or less than NEMA value for the rating. Also,
during accelerating period, connected load torque shall be equal to, or less than, a torque which
varies as square of the speed and is equal to 100% of full-load torque at rated speed.

Frame sizes are estimated and are subject to change without notice. Frame sizes may have a suffix or
combination of suffixes dependent upon enclosure, bearings, and/or features;
 D = Flanged. Indicates that motor is to be supplied with a D-flanged bearing housing.
 S = Short shaft. Indicates motor is to be supplied with Siemens standard short shaft extension for
direct connection except on 680 frame series where no suffix is used.
 Y = Special mounting. Indicates motor is to be supplied with non-standard mounting dimensions.
 Z = Special shaft. Indicates motor is to be supplied with non-standard or special shaft dimensions.
 No Suffix = Indicates that motor is to be supplied with a Siemens standard long shaft extension
except on 680 & 800 frame series. The long shaft is provided if Belt Drive modification is made
from the Modification & Accessories Section.

Some 680 frame ratings can be supplied with grease lubricated ball bearings. Refer exact requirements
to factory for price and availability.

Lead Times will be per the latest issue of the Norwood Product Lead Times document ANMC- 70000-xxxx.
Section 1
Part Encl

Page 3
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
Enclosures – Designed To Meet All Application And Environmental Needs

Horizontal Drip Proof / Weather Protected I (Type CG) / IC01 / IP23
Meets or exceeds industry standards for NEMA WP-type machines. Best suited for indoor applications where
not exposed to extreme ambient conditions. Available through 10,000 HP.

Horizontal Drip Proof / Weather Protected II (Type CGII) / IC01 / IP24
Meets or exceeds industry standards for NEMA WPII-type machines. Specifically designed for outdoor
applications where motor is not likely to be protected by other structures. Available through 18,000 HP.

Totally Enclosed Fan Cooled Totally Enclosed Air-to-Air Cooled
(Type CZ and CGZ) / IC411 / IP54 (Type CAZ) / IC611 / IP54

Designed for indoor and outdoor applications Designed for indoor and outdoor applications where

where internal parts must be protected from internal parts must be protected from adverse

adverse ambient conditions. Utilizes cooling ambient conditions. Utilizes air-to-air tube-type heat
fins on all four quadrants of yoke and exchangers. Available through 14,000 HP.
housings. Available through 2250 HP.
Section 1
Part Encl

Page 4
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
Enclosures – Designed To Meet All Application And Environmental Needs

Totally Enclosed Water-to-Air Cooled (Type CGG) / ICW81 / IP54
Same critical design requirements as the air-to-air cooled machine with the added benefit of low noise and
efficient water cooling. Available through 18,000 HP.
Section 1
Part MRPD

Page 5
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
Machine Readable Product Description (MRPD) Structure
Siemens Norwood AboveNEMA motors has adopted the Machine-Readable Product
Designation structure (MRPD). These designations, which are very similar in structure to those
used by many other Siemens Business Units, will provide a clear means of product designation.

The benefits of adopting the MRPD codes include:
1) Consistent communication between regional organizations, field sales personnel and the
business unit
2) Improved processes within Norwood
3) Enables smoother transition into product standardization
4) Provides a basis for product lead-times

The MRPD structure is generated by two segments:
1) Product codes - 12 Alpha-numeric characters which define:
 Enclosure
 Frame-size
 Motor speed (Number of poles)
 Rotor construction
 Voltage / Frequency
 Type of construction (horizontal, vertical, flange-mounted, etc)
2) Option codes - Standard accessories

The next several pages describe the Product Code structure for;
 Modular (ODP/WPI, WPII, TEAAC and TEWAC enclosures) machines.
 TEFC machines.

In the Modifications and Accessories Section, you will find the Option Codes and Categories
listed. It is important that these codes, both Product and Options, are clearly indicated on the
orders.

The Categories, explained in more detail later, are listed as the minimum category for the given
option. The base motor category or other options with higher categories may impact the overall
category of the motor. The highest category will dictate the applicable lead-time of the motor.
Section 1
Part MRPD

Page 6
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
Machine Readable Product Description (MRPD) Structure
C
MODULAR GMroauinp Sub Group Factory Frsaizmee- Reserved # of Poles ooling Type RToyptoer Volts / Hz Mounting Options
Data Position 1 2 3 4 5 6 7 - 8 9 10 11 12 - Z
Example 1 R P 2 6 8 E - 2 H E 3 0 - Z
1 + 2 Main Group Identification
1R Induction Motor (Modular - ODP/WPI, WPII, TEWAC or TEAAC)
1S Induction Motor (Modular) - Hazardous Areas
3 Sub Group (Enclosure-type & Hazardous Area)
1RA ODP / WPI (IP23 / IC01), Non-hazardous Areas
1RN TEWAC (IP54 / ICW81), Non-hazardous Areas
1RP WPII (IP24 / IC01), Non-hazardous Areas
1RQ TEAAC (IP54 / IC611 or IC616), Non-hazardous Areas
1SC WPII (IP24 / IC01), Hazardous Areas (Division 2 or Zone 2)
1SG TEAAC (IP54 / IC611 or IC616), Hazardous Areas (Division 2 or Zone 2)
1SL TEWAC (IP54 / ICW81), Hazardous Areas (Division 2 or Zone 2)
4 Factory Specifics
2 2 = Norwood-built
5 + 6 Frame-size
50 500 Frame
58 580 Frame
68 680 Frame
80 800 Frame
11 1120 Frame
7 Reserved for Factory Use
E This position will contain letters for Norwood-built motors
8 Number of Poles
2 2 pole motor
4 4 pole motor
6 6 pole motor
8 8 pole motor
3 10 pole motor
5 12 pole motor
7 14 pole motor
9 Refer to factory for slower speeds
9 Cooling Type
ODP / WPI, WPII & TEWAC - Standard Internal Fan Design
H
TEAAC = Use H Code for TEAACs with Auxiliary Blowers for Cooling (IC616)
J TEAAC = Use J Code for TEAACs with Shaft-Mounted External Fan (IC611)
10 Rotor Construction
Motors without VFD (Line Supply Operation) Motors used with VFD
B Aluminum Die-cast L Low Voltage Drive - Aluminum Rotor
E Copper-bar M Low Voltage Drive - Copper Rotor
N Medium Voltage Drive - Aluminum Rotor
V Medium Voltage Drive - Copper Rotor
11 Voltage, frequency
Medium / High Voltage Applications Low Voltage Applications
0 3300 V, 50 hz 0 690 V, --
1 6600 V, 60 hz 1 460 V, 60 hz
2 13200 V, 60 hz 2 575 V, 60 hz
3 4160 V, 60 hz 3 380 V, 50 hz
4 4000 V, 60 hz 4 415 V, 50 hz
5 2300 V, 60 hz 5 500 V, --
6 6000 V, 50 hz 6
7 6600 V, 50 hz 7 660 V, --
8 10000 V, 50 hz 8
9 other voltage/frequency 9 other voltage/frequency
12 Mounting
0 Horizontal, foot-mounted
1 NEMA D-Flange, with feet
3 Vertical, hollow shaft
4 Vertical, solid shaft, with canopy
8 Vertical, solid shaft, without canopy
9 Other types of mounting (requires additional text)
13 Option Code
Z Means that the motors will have additional options
Section 1
Part MRPD

Page 7
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
Machine Readable Product Description (MRPD) Structure
TEFC GMroauinp Sub Group Factory Frsaizmee- Reserved # of Poles Rotor Type oSrLu VipnFpelD y Volts / Hz Mounting Options
Data Position 1 2 3 4 5 6 7 - 8 9 10 11 12 - Z
Example 1 L A 2 5 8 E - 2 L N 3 0 - Z
1 + 2 Main Group Identification
1L Induction Motor (TEFC), Non-Hazardous Area
1M Induction Motor (TEFC), Hazardous Area (Div. or Zone 2)
3 Sub Group (Enclosure-type & Hazardous Area)
1LA TEFC, IP54, Basic Version
1MS TEFC, IP54, Hazardous Area (Division 2 or Zone 2)
4 Factory Specifics
2 2 = Norwood-built
5 + 6 Frame-size
50 500 Frame
58 580 Frame
70 708 Frame
78 780 Frame
88 880 Frame
7 Reserved for Factory Use
E This position will contain letters for Norwood-built motors
8 Number of Poles
2 2 pole motor
4 4 pole motor
6 6 pole motor
8 8 pole motor
3 10 pole motor
5 12 pole motor
7 14 pole motor
9 Refer to factory for slower speeds
9 Rotor Type
L Aluminum die-cast
N Copper-bar
10 Line Supply or VFD (LV or MV)
A Line-supply; Low Voltage (<1000 V)
M VFD; Low Voltage (<1000 V)
N Line-supply; Medium Voltage (>1000 V)
V VFD; Medium Voltage (>1000 V)
11 Voltage, frequency
Line supply operation, MV / HV MV drive converter operation Line supply/drive converter operation, LV
0 3300 V, 50 hz 0 2.3kV, 50 hz 0 690 V
1 6600 V, 60 hz 1 2.3 kV, 60 hz 1 460 V
2 2300 V, 60 hz 2 3.3 kV, 50 hz 2 575 V
3 3000 V, 50 hz 3 3.3 kV, 60 hz 5 500 V
4 4160 V, 60 hz 4 4.16 kV, 50 hz 7 660 V
5 4000 V, 60 hz 5 4.16 kV, 60 hz 9 Other Voltages
6 6000 V, 50 hz
7 6600 V, 50 hz
9 other voltage/frequency
12 Mounting
0 Horizontal, foot-mounted
1 NEMA D-Flange, with feet
4 Vertical, solid shaft, with canopy
8 Vertical, solid shaft, without canopy
9 Other types of mounting (requires additional text)
13 Option Code
Z Means that the motors will have additional options
Section 1
Part Index

Page 8
Date 02/11
Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211
Index
Section 1 Base List Prices, Frame, and Features Page
Part 1 - ODP Enclosure - 60 Hertz 1-10
Part 2 - WPI Enclosure - 60 Hertz 1-10
Part 3 - WPII Enclosure - 60 Hertz 1-10
Part 4 - TEWAC Enclosure - 60 Hertz 1-7
Part 5 - TEFC Enclosure - 60 Hertz 1-8
Part 6 - TEAAC Enclosure - 60 Hertz 1-7
Part 1A - ODP Enclosure - 50 Hertz 1-3
Part 2A - WPI Enclosure - 50 Hertz 1-3
Part 3A - WPII Enclosure - 50 Hertz 1-3
Part 4A - TEWAC Enclosure – 50 Hertz 1-2
Part 5A - TEFC Enclosure - 50 Hertz 1-2
Part 6A - TEAAC Enclosure - 50 Hertz 1-2
Part 5B – TEFC Enclosure per IEEE 841 Std – 2009 1-4
Section 2 Modifications & Accessories
Adjustable Speed Drives 1
Altitude 2
Ambient 2
API 541 – 3rd or 4th Editions 3
API 547 – 2005 3-6
Assembly 7
Balance – Precision Balance for Low Vibration 7
Balance – Special 7
Bearings – Insulation 8
Bearings – Lubrication Systems 8
Bearings - Oil Sump Heaters 8
Bearing Protective Devices – Mechanical 9
Bearing Protective Devices – Temperature 10-11
Bearings – Sleeve 12
Belt Drive Applications 13
Cancellation Charges 14
Chipper/Crusher Drives 14
Couplings 15
Current Transformers 15
Differential Pressure Switch 15
Direction of Rotation 15

All information in this guide is subject to change without notice. Please contact your local Siemens sales
representative for information or assistance with any ratings or modifications not found in this book or with any
Siemens products.