Series 79 Micro-Crimp Connectors and Accessories

173 Pages·2017·19.65 MB·English

Series 79 Micro-Crimp
Connectors and Accessories
The High-Performance Rectangular with
Advanced EMC and Environmental Performance
United States  United Kingdom  Germany  France  Nordic  Italy  Spain  Japan
Second Edition • June 2011
SERIES 79
MMIICCRROO--CCRRIIMMPP
•
ULTRAMINIATURE • SHIELDED • ENVIRONMENTAL
M
eet the newest member of Glenair’s rectangular connector family, the Series 79 Micro-Crimp. The
ultraminiature Micro-Crimp connector features crimp, rear-release size #23 contacts on .075 inch (1.9 mm)
spacing, as well as size #12 and #16 power, coaxial and fi ber optic contacts. Available in 31 hybrid insert
arrangements, the Micro-Crimp off ers broad versatility for data and power transmission. Today’s defense/aerospace
systems require advanced levels of environmental protection, electromagnetic shielding and size/weight reduction.
The Series 79 was developed to meet these needs. Panel mounted connectors feature conductive sealing gaskets.
Right angle printed circuit board connectors have an EMI shroud to prevent electromagnetic interference. Wire sealing
grommets and interfacial seals protect circuits from moisture and contamination. Series 79 plugs are also available
with auxillary EMI springs for advanced EMC performance.
GLENAIR, INC. • 1211 Air Way • Glendale, CA 91201-2497 • Tel: [phone] • Email: [email protected] • www.glenair.com
pn
Series 79 Micro-Crimp 9mo
Connectors and Accessories ries 7ro-Crioducti
Table of Contents ecr
SMint
I
Introduction to the
Product Features,
A
Series 79 Micro-Crimp Connector Selection Guide and
Technology Showcase
Signal, Power and Coaxial
Contacts.................B-2 to B-7 B
Contacts and Crimp Tools
Tools.....................B-8 to B-11
Insert Arrangements.....C-1
General Information Materials and Specs......C-5
A1 1 2 3 4 A2 C
and Reference Plating Options...............C-9
5 6 7 8 9 Space Grade Versions...C-10
Panel Cutouts..............C-14
Crimp Terminated
D
Cable Connectors 790-024P and 790-025S
Crimp Terminated
790-026P, 790-027S, E
Panel Mount Connectors
790-050P, 790-049S
Straight PCB Panel Mount
790-028P, 790-043P, F
and Free-Standing Connectors
790-029S, 790-044S,
Right Angle PCB Panel Mount
790-036P, 790-041P, G
and Free-Standing Connectors
790-037S, 790-042S
Backshells and Accessories, 799-015,799-016,
H
799-011, 799-018,
EMI Adapters and Protective Covers
799-019
I
N
Part Number Index D
E
X
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com A-1 E-Mail: [email protected]
InM
troductioicro-CrimSeries 79 Series 7In9t Mroidcuroc-tCiornim top tChoennector
np
The Micro-D Connector with Crimp Contacts

A
Meet the newest member of
MM --CC TTMM
IICCRROO RRIIMMPP Glenair’s Micro-D family, the
Series 79 Micro-Crimp. The
Micro-Crimp connector features crimp, rear-release size #23 contacts
on .075 inch (1.9 mm) spacing, as well as size #12 and #16 power
and coaxial crimp contacts in a range of hybrid layouts. Available in Cable Plug With
31 insert arrangements, the Micro-Crimp provides a wide selection of Socket Contacts
arrangements for data and power transmission. and EMI Spring
Today's defense/aerospace systems require advanced levels of
environmental protection, electromagnetic shielding and size/weight
reduction. The Series 79 was developed to meet these needs. Panel
mounted connectors feature conductive sealing gaskets. Right angle
printed circuit board connectors have an EMI shroud to prevent
electromagnetic interference. Wire sealing grommets and interfacial
Cable Receptacle
seals protect circuits from moisture and contamination. Series 79 plugs
With Pin Contacts
are available with auxillary EMI springs for superior EMC performance.
Panel Mount Right Angle Panel Mount Receptacle
PCB Plug with EMI Shroud with Straight PC Tails
and EMI Spring
BeCu Insert
Retention Clip EMI Spring
Three Contact Sizes: BeCu Insert
Fluorosilicone
12, 16 and 23 Retention Clip Fluorosilicone
Grommet
Grommet
Fluorosilicone Gold-plated BeCu RTV Sealing
Machined Interfacial Seal Contact with SST
Aluminum Hood
Shell 30% Glass-Filled
LCP Insulators
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com A-2 E-Mail: [email protected]
pn
9mo
Series 79 MSeilcercoti-oCnr Gimuipd eConnector ries 7ro-Crioducti
ecr
SMint
I
Plug Connectors
A
(Socket Contacts)
Crimp Termination Printed Circuit Board Printed Circuit Board
For Attaching Wire or Cable For Rear Panel Mounting Free-Standing
Standard Rear Panel Float Straight Right Angle Straight Right Angle
Cable Mount Mount PCB PCB PCB PCB
790-025S 790-027S 790-049S 790-029S 790-037S 790-044S 790-042S
Page D-4 Page E-6 Page E-17 Page F-16 Page G-16 Page F-21 Page G-21
Receptacle Connectors
(Pin Contacts)
Crimp Termination Printed Circuit Board Printed Circuit Board
For Attaching Wire or Cable For Rear Panel Mounting Free-Standing
Standard Rear Panel Float Straight Right Angle Straight Right Angle
Cable Mount Mount PCB PCB PCB PCB
790-024P 790-026P 790-050P 790-028P 790-036P 790-043P 790-041P
Page D-1 Page E-1 Page E-11 Page F-1 Page G-1 Page F-6 Page G-6
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com A-3 E-Mail: [email protected]
IntrMicSe Series 79 Micro-Crimp Connector
orr
ductioo-Crimies 79 Technology Showcase
np
Technology Showcase
A MM --CC TTMM
IICCRROO RRIIMMPP
Integrated Ground Spring
RUBBER RETAINER
GROMMET TINE Series 79 plugs are available with
auxiliary EMI springs for superior EMC
performance.
Low profi le EMI adaptteerrss ffoorr ccaabbllee
braid termination with Glenair’s BAND-
Rear-Release Crimp Contacts
IT® straps.
Series 79 Size #23 contacts conform
EMI Backshell Adapters
to the AS39029 requirements, but are
Shielded Panel Mount Connectors
not covered by a slash sheet. Size #16 These two-piece adapters fi t into
and size #12 contacts are standard Avoid EMI problems “inside-the-box” a groove on Micro-Crimp cable
“QPL” contacts used in MIL-DTL-38999 with optional EMI adapters. These connectors. Attach to connector with
connectors. adapters attach to standard panel mount screws (provided). Elliptical banding
ccrriimmmppp--tttyyypppeee vvveeerrrsssiiiooonnnsss.. platform provides ample room for
large wire bundles.
Integrated EMI Shroud
Right angle printed circuit board
connectors have an EMI shroud to
PPanell mountt connecttor wiitthh opttiionall EEMMI
prevent electromagnetic interference. adapter.
Jackpost Hardware Options
A complete range of jacking hardware
is available including captivated, low-
profi le and extended versions.
#16 Fiber Optic Contacts
A1 1 2 3 4 A2
Gold-plated M39029 size #12 and #16 Size #16 fi ber optic termini are com-
contacts for high current capacity. patible with all Series 79 Micro-Crimp 5 6 7 8 9
connectors with size #16 cavities.
Snap-In COAX & Power Pins Over Thirty Layouts
These snap-in, rear-release termini
Size #12 contacts accept #12-14 AWG feature precision ceramic ferrules Twelve different shell sizes are offered
wire. Size 12 and 16 cavities also and sleeves for accurate fi ber align- with from 5 to 102 contacts. #23, #16
accept coaxial contacts purchased ment. Typical insertion loss 0.5 dB. and #12 AWG cavities accept signal,
separately. These crimp contacts are Fits 50/125 and 62.5/125 multi mode power, shielded and fi ber optic contacts.
plated with 50 microinches gold over and 9/125 single mode fi ber. Stainless Hybrid layouts support a wide range of
nickel underplating. steel bodies and springs. common requirements.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com A-4 E-Mail: [email protected]
pn
9mo
SeriesT e7c9h Mnoiclorog-yC Srihmopw Ccoasnenector ries 7ro-Crioducti
ecr
SMint
I
Technology Showcase
MM --CC TTMM A
IICCRROO RRIIMMPP
Pneumatic Contacts
Snap these “gas” pitot tube contacts
snap into any size #12 contact cavity
and are designed for air speed sensor
applications. Attach standard ttuubbiinng
to the contact.. TThheese staaiinnlleessss sstteeeeell
contaaccttss aarree rreemmooovvvvaabbllee..
Series 79 with ssiizzee ##1122 ppoowweerr ppiinnss for
up to 23 amp current capaacciittyy.. Right angle PPCCBB ccoonnnneeccttoorrss ffoorr tthhrru-
hole termination
Micro-Crimp Combo Layouts
Right Angle PCB Header
Thirty-one contact arrangements are
Available in panel mount (shown)
available with size #23 contacts for
Sizee ##1122 ppnneeuumatic connttaaccttss wwiitthhssttaand or free-standing versions, these
signal and data, size #16 contacts
up ttoo 1100 PSI air pressurree ffoorr ppitot tube connectors feature an EMI shroud
for up to 13 amps power, or size #12
applications. and threaded board mounting holes.
contacts for up to 23 amp capacity. All
Float Mount Connectors
31 arrangements are available with
crimp pins or with printed circuit tails. 790-050P connectors are equipped
with rear-panel fl oat mounting
assemblies to provide additional
mounting lee-way in rack and panel
applications.
790-028PH-66 with stainless steel guide Protective Covers
pins for blind mate applications.
Machined aluminum covers prevent
Guide Pins for Blind Mating ingress of water and contamination.
Plug covers provide metal-to-
Series 79 panel connectors can be
Float Mount connectors feature machined metal bottoming for EMI protection.
confi gured with guiding hardware for
aluminum shells and wire grommets for Receptacle covers feature conductive
module-to-chassis applications.
environmental protection. fl uorosilicone gaskets. For attachment,
Choose small diameter eye fi ttings
Conductive Panel Gaskets
for panel attachment. Larger rings fi t
Panel mount connectors are supplied over cable jackets. Split rings can be
with conductive fl uorosilicone gaskets installed on fully assembled cables.
for sealing to bulkheads. These gaskets
provide an easy way to assure a
watertight installation.
Watertight EMI gaskets are supplied
with all panel mount Micro-Crimp
Shield Termination System
connectors.
Glenair Band-Master Advanced
Termination System delivers turnkey
shield termination tools, bands and
calibration services.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com A-5 E-Mail: [email protected]
SERIES 79
MICRO-CRIMP
CONTACTS • ASSEMBLY TTOOOOLLSS •• BBAANNDD-MASTER™ ATS
S
eerriieess 7799 MMiiccrroo--CCrriimmpp ssiiggnnaall,, ppoowweerr aanndd ccooaaxxiiaall ccoontacts are crimped to wire using mil spec crimpers. The Micro-
CCrriimmpp ccoonnnneeccttoorr ffeeaattuurreess ccrriimmpp,, rreeaarr--rreelleeaassee ssiizzee #23 contacts on .075 inch (1.9 mm) spacing, as well as size #12
and #16 power, coaxial, fi ber optic contacts in a range of hybrid layouts. Available in 31 insert arrangements, the
Micro-Crimp provides a wide selection of arrangements for data and power transmission. Military Specifi cation MIL-
DTL-22520 provides the aerospace/defense industry with a common set of rugged, reliable hand crimp tools. This
specifi cation controls the voltage drop and tensile strength of crimp terminations. The Series 79 Micro-Crimp family
of products is well-supported with a complete range of contacts, tools and assembly instructions for turnkey assembly
and use.
GLENAIR, INC. • 1211 Air Way • Glendale, CA 91201-2497 • Tel: [phone] • Email: [email protected] • www.glenair.com
Series 79 Micro-Crimp 79tsols
co
saT
Section B: Contacts and Tools SerieContand
Series 79 Micro-Crimp Contacts and Tooollss
B
Signal and Power Contacts Coaxial Contacts Pneumatic Contacts
B-2 B-5 B-7
Crimp Tools Insertion/Extraction Tools Band-Master™ Tool and Bands
B-8 B-10 B-11
About Mil Spec Contacts For Series 79 Micro-Crimp Connectors
Aerospace Standard AS39029 in AS39029/58. Each contact is assigned a Coaxial contacts are covered by
(SAE) defi nes the design, dimensions Basic Identifi cation Number (BIN), a non- AS39029.These contacts are not
and performance of contacts used in signifi cant three digit code corresponding to recommended for high frequency
aerospace grade electrical connectors. the color code on the contacts. A Qualifi ed applications. Note 6.1.2 states “Type
D contacts are coaxial contacts...
The “general specifi cation” covers a Products List (QPL) identifi es those
to shield the circuit from unwanted
variety of contacts including thermocouple, manufacturers whose products have been
interference (RFI and EMI). These
hermetic, coaxial and triaxial types. verifi ed to meet all requirements. Series 79
contacts are not impedance
The "slash sheets" contain Size #23 contacts conform to the AS39029 (matched) and, therefore, are not
dimensions and other information for requirements, but are not covered by recommended for RF use.” Matched
specifi c types of contacts. For example, a slash sheet. Size #16 and size #12 impedance 50 ohm coaxial contacts
pin contacts used in MIL-DTL-38999 contacts are standard “QPL” contacts used are available but are not covered by
connectors are specifi ed in MIL-DTL-38999 connectors. the AS39029 specifi cation.
About Mil Spec Crimp Tools
Series 79 Micro-Crimp signal, power Before ordering, check to see if you Calibration: gage pins are available
and coaxial contacts are crimped to might already have these tools! We for checking crimp tool calibration.
wire using mil spec crimpers. Military have listed the military part number Tools should be checked periodically.
Specifi cation MIL-DTL-22520 provides and the Daniels part number. Daniels If a tool needs calibration, the mil spec
the aerospace/defense industry with a Manufacturing Corporation is the leading requires calibration to be performed
common set of rugged, reliable hand manufacturer of these tools. The size 23 by the manufacturer or a certifi ed
crimp tools. This specifi cation controls the positioner part number 809-005 is not a ANSI-Z540.1 agency. Gauging and
voltage drop and tensile strength of crimp standard tool. Chances are, you will need calibration information is supplied in the
terminations. this positioner box with the tool.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com B-1 E-Mail: [email protected]
and TContaSeries Size #23 Copper Alloy Crimp Contacts
oc
ot7
lss9
Size #23 Copper Alloy Crimp Contacts
Contact Ø A Color Tool
Type Wire Size Material Part Number In. mm. Band Code
Pin #22 – #28 BeCu 809-001 .0335-.0355 0.851-0.902 None A, C
Pin #26 – #30 BeCu 809-042 .0229-.0245 0.582-0.622 Blue A, D
B Pin #22 – #28 Alumel 809-065A .0335-.0355 0.851-0.902 None A, C
Pin #22 – #28 Chromel 809-065C .0335-.0355 0.851-0.902 None A, C
#23 Pin Contact Socket #22 – #28 BeCu 809-002 .0335-.0355 0.851-0.902 None A, C
Socket #26 – #30 BeCu 809-043 .0229-.0245 0.582-0.622 Blue A, D
Socket #22 – #28 Alumel 809-066A .0335-.0355 0.851-0.902 None A, C
Socket #22 – #28 Chromel 809-066C .0335-.0355 0.851-0.902 None A, C
Standard size #23 contacts accept #22 to #28 AWG wire. Choose "small bore"
versions for #26 to #30 AWG wire. For thermocouple applications, specify alumel
#23 Socket Contact
or chromel contacts. Contacts are bulk packaged. Terminate with standard
M22520 crimper with special positioner.
CRIMP TENSILE STRENGTH .289 (7.34) .165 (4.19)
Values are in pounds and are minimums. .283 (7.19) .160 (4.06) Ø.048 (1.22)
.044 (1.12)
Silver or Tin Nickel #23 Pin
Wire Coated Copper Coated Contact
Gage Wire Copper Wire
#22 12 8
.034 (0.86) Ø A
#24 8 6 Ø.0275 (0.699) .029 (0.74) Ø.056 (1.42)
#26 5 3 .0265 (0.673) SPHERICAL RADIUS MAX
COLOR
#28 3 2 .015 (0.38) MAX FLAT BAND
#30 1.5 1.5
Material and Finish COLOR
BAND
Copper alloy per ASTM B196 or HOOD .440 (11.18) Ø.048 (1.22)
B197, 50 microinches gold plated per MAX .044 (1.12)
ASTM B488 Type 3 Code C Class
#23 Socket
1,27 over nickel plate per QQ-N-290
Contact
Class 2, 50-100 microinches.
Thermocouple contacts: alumel or Ø .053
.031 (0.79) .055 (1.40)
chromel alloy, unplated, per ANSI (1.35) .275 (6.99) .025 (0.64) Ø A MAX
96.1 MAX .265 (6.73)
Socket contact hood: stainless steel,
passivated per AMS-QQ-P-35.
Specifi cations Crimp Tools and Insertion/Removal Tools
Current Rating: 5 Amps maximum  Crimper: 809-015
Voltage Drop (at 5 Amps and 25° C):  Positioner: 809-005 (standard). Use P/N 809-057 for small bore
70 millivolts maximum
contacts 809-065 and 809-066
Temperature Range: -65° to + 200° C
 Standard Insertion/Removal Tool: 809-088
Socket Contact Minimum Separation
Force: 0.5 ounces
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com B-2 E-Mail: [email protected]