Sec 07 CtEtCO - Andersen Windows Corporation

45 Pages·2003·7.16 MB·English

Specialty Windows
Circle Top™, Quarter Round & Circle & Oval Windows Flexiframe® Windows Custom Arch , Springline™ &
Elliptical Windows Enhancement Windows
Compatible sizes and jamb configurations facilitate joining Circle Top™ and elliptical Standard sizes are available in hundreds of sizes and shapes. Flexiframe® and
units with other Andersen® windows and doors to create combinations. custom arch windows allow you to create custom windows.
• Low maintenance exteriors with natural wood interiors • Low maintenance exteriors with natural wood interiors
• Excellent for creating window combinations • Create large window combinations
• Inside arch casings simplify interior trim application • Custom design capability
Contents
Circle Top™, Elliptical, Circle and Oval Windows Flexiframe®, Arch, Springline™ and Enhancement Windows
Basic Unit Details Basic Unit Details
Circle Top™ and Quarter Round Basic Unit ................7-2 Flexiframe® Basic Unit ...................................................7-26
Elliptical Basic Unit ...................................................7-3 Arch / Custom Arch Basic Unit ......................................7-26
Circle and Oval Basic Unit .........................................7-3 Springline™ Basic Unit ...................................................7-27
Options / Accessories Springline™ Flanker Basic Unit .......................................7-27
Andersen® Grilles .......................................................7-4 Enhancement Full Chord Basic Unit ...............................7-28
Extension Jambs .......................................................7-6 Enhancement Gothic Basic Unit ....................................7-28
Trim Options and Applications—Circle and Oval Windows Enhancement Monumental Quarter Round Basic Unit ....7-29
Transition Piece / Key Block ......................................7-8 Enhancement Monumental Full Round Basic Unit ..........7-29
Key Block/Key Component ........................................7-9 Enhancement Octagon Basic Unit ..................................7-29
Transition Piece ......................................................7-10 Design Parameters for Custom Arch Windows .......................7-30
Trim Options and Applications—Circle Top & Elliptical Windows Options / Accessories
Plinth Blocks ..........................................................7-11 Andersen® Grilles ...........................................................7-32
Interior Casing ........................................................7-12 Extension Jambs ...........................................................7-34
Joining Details ..............................................................7-13 Trim Options and Applications - Arch Windows
Anchoring Methods .......................................................7-17 Transom Joining of Equal Leg Arch ................................7-35
Suggested Product Applications ....................................7-18 Arch Combination .........................................................7-35
Arch Palladian / Casement Combination .......................7-35
Transom Joining of Partial Chord Arch ...........................7-36
Extension Jamb Trim-out ................................................7-36
Trim Options and Applications - Springline™ Windows
Transition Piece / Key Block / Plinth Block ....................7-37
Key Block / Key Component ..........................................7-38
Transition Piece .............................................................7-39
Trim Options
Plinth Block ...................................................................7-40
Interior Casing ...............................................................7-41
Joining Details .....................................................................7-42
Anchoring Methods ..............................................................7-43
Suggested Product Applications ...........................................7-44
REV.03/05 A R C H I T E C T U R A L D E T A I L F I L E 7-1
Specialty Windows
Basic Unit Details
Circle Top™ and Quarter Round Basic Unit
(for casement and awning sizes)
Scale 3" = 1'-0" (1:4)
1-5/16" (33) 2-7/8" (73) 1-5/16" (33) 2-7/8" (73)
1-1/8" (29) 1-1/8" (29)
2-1/4" (57) 2-1/4" (57)
1-1/8" (29) 1-1/8" (29)
Head Head
1" (25)
1" (25)
2-1/4" (57) 2-1/8" (54)
1-1/4" (31) 1-1/8" (29)
Sill
Sill
Vertical Section Vertical Section
Circle Top Quarter Round
Circle Top™ Basic Unit
(for double-hung sizes)
Scale 3" = 1'-0" (1:4)
1-5/16" (33) 4-1/2" (116)
13/16" (21)
7/16" (11)
2-5/8" (67)
1-3/8" (35)
Head
1-1/16" (27)
7/16" (11) 2-3/8" (60)
9/16" (14)
5/16" (8)
Sill
Vertical Section
7-2 A R C H I T E C T U R A L D E T A I L F I L E REV.03/05
Specialty Windows
Basic Unit Details
Elliptical Basic Unit
Scale 3" = 1'-0" (1:4)
1-5/16" (33) 4-1/2" (116)
1" (25)
9/16" (14) 2-1/2" (64)
15/16" (24)
Head
7/8" (22)
2-5/16" (59)
1-1/8" (29)
5/16" (8)
Sill
Vertical Section
Circle and Oval Basic Unit
Scale 3" = 1'-0" (1:4)
1-5/16" (33) 2-7/8" (73)
Optional Andersen®
key component
(circle style shown)
Optional Andersen®
1-1/8" (29) key block
2-1/4" (57)
1-1/8" (29) Standard Andersen®
transition piece stop
(circle style shown)
Optional Andersen®
Head transition piece
extension jamb
Optional Andersen®
extension jambs
1-1/8" (29)
2-1/4" (57)
1-1/8" (29) Optional Andersen®
interior casing
Optional Andersen®
transition piece casing
Sill
Vertical Section
REV.03/05 A R C H I T E C T U R A L D E T A I L F I L E 7-3
Specialty Windows
Options / Accessories
Andersen® Divided Light Grilles
Andersen® Andersen®
400 Series Windows m 400 Series Doors
o
AAtPfohlvvereaa a aiiAllsvaanaebbd illlcaeeehb rnoseieloncitnkwlyy wDwiitivthihd Ae3nd/d 8Le"igr sgheltan ps sro tghrraomugh Casement & Awning Casement Picture Window Gliding Window Woodwright® Double-Hung & Transom Woodwright® Picture Window Woodwright® Archtop & Unequal Leg Archtop Woodwright® Springline™ Single-Hung Tilt-Wash Double-Hung & Transom Tilt-Wash Picture Window Circle Top™ & Quarter Round Arch Springline™ Flexiframe® Elliptical Circle & Oval Gothic 200 Series Narroline® Double-Hung & Trans Frenchwood® Gliding Frenchwood® Hinged Inswing Frenchwood® Hinged Outswing Frenchwood® Patio Door Sidelights & Transoms
White
or
ol
C Sandtone
or
eri Terratone®
xt
E Forest Green
3/4"
h 7/8"
dt
Wi 1-1/8"
2-1/4"
e With Spacer
p
Ty Without Spacer
Maple
or Oak
eri
nt Prefinished
I
Pine
Colonial
Modified Colonial
Modified Col W/Check Rail
Prairie A
Short Fractional
s
n Short Fractional W/Check Rail
er
att Tall Fractional
P
Tall Fractional W/Check Rail
Victorian
Renaissance
Sunburst
Specified Equal Light
Custom
HP/HP Tempered
s HP Sun/HP Sun Temp
s
a
Gl 3/8" Low-E/Temp
Single-Pane Impact
7-4 A R C H I T E C T U R A L D E T A I L F I L E REV.03/05
Specialty Windows
Options / Accessories
400 Series Grille Options
Andersen® Divided Light Grille Andersen® Divided Light Grille Andersen® Divided Light Grille Removable Andersen® Finelight™
Permanent Exterior Permanent Exterior Permanent Exterior Interior Grilles-Between-the-Glass
Permanent Interior Permanent Interior Removable Interior
with Spacer
Grille Profiles • Scale = Full • Dimensions include thickness of tape.
Permanent Exterior Fibrex® Material Grille Profiles (chamfer profile). Also used for pre-finished interior, except 400 Series Woodwright® double-hung windows.
5/16" 7/16" 1/2"
1-13/16"
45˚
45˚ 45˚ 35˚
5/16" 5/16" 5/16" 5/16"
3/4" 7/8" 1-1/8" 2-1/4"
Permanent Interior Wood Grille Profiles (chamfer profile).
The Fibrex® material exterior grille is used when a permanent prefinished grille is specified, except with 400 Series Woodwright® double-hung windows.
1/2" 1-13/16"
5/16" 7/16"
3/8" 53˚ 3/8" 53˚ 3/8" 35˚ 7/16" 53˚
3/32"
3/4" 7/8" 1-1/8" 2-1/4"
Removable Interior Wood Grille Profile (roman ogee profile). Removable Interior Wood Grille Profile (Chamfer profile).
400 Series Woodwright® double-hung windows only.
1/2" 7/16"
3/4" 7/8" 1-1/8" 3/4" 7/8" 1-1/8"
Permanent Full Divided Light Grille spacer location.
1/2" 1/2" 1/2" 1/2" 1/2"
1/8" 3/16" 5/16" 1/8"
Andersen® Finelight™ Grilles-Between-the-Glass.
3/8" 1/2"
3/4" 1"
REV.03/05 A R C H I T E C T U R A L D E T A I L F I L E 7-5
Specialty Windows
Options / Accessories
Extension Jambs for Circle Top™ (casement/awning size), Circle and Oval Windows
Scale 3" = 1'-0" (1:4)
3/4" (19) at curve
Face: 4-9/32" (109) 7-1/8" Face: 3-23/32" (95) 6-9/16" 2-13/32" (61)11/165"- 1(/147") at sill1-23F/a3c2e": (44) 16" (116) 5-1/4" (133) 6-9/16" (167) 7-1/8" (181)
Wall Wall Wall 9/
4-
Unit Dim. Width
1/4" (6)
Rough Opening
Width
Horizontal Section
Extension Jambs for Circle Top™ (double-hung size) Windows
Scale 3" = 1'-0" (1:4)
Optional Andersen®
arched casing
7) 3/4" (19) at curve
2-9/16" (65) Face: 2" (51) Face: 11/16" (1 11/16" (17) at sill 1)
7-W1a/l8l" 6-W9/a1ll6" 5-W1a/l4l" 16" (116) 5-1/4" (133) 6-9/16" (167) 7-1/8" (18
/
9
4-
1/4" (6)
Rough Opening
Width
Horizontal Section
Extension jambs available for 4-9/16" (116), 5-1/4" (133), 6-9/16"
(167) or 7-1/8"(181) wall thickness. Other wall dimensions can be
accommodated with extension jamb modification. 6-9/16" extension
jamb is predrilled for easy application.
7-6 A R C H I T E C T U R A L D E T A I L F I L E REV.03/05
Specialty Windows
Options / Accessories
Extension Jambs for Elliptical Unit
Scale 3" = 1'-0" (1:4)
Face: 2-9/16" (65) Face: 2" (51) Face: 11/16" (17) 151/8/1" 6(1" 6(1) 7a)t caut rsviell 1)
7-W1a/l8l" 6-W9/a1ll6" 5-W1a/l4l" 16" (116) 5-1/4" (133) 6-9/16" (167) 7-1/8" (18
/
9
4-
Unit Dim. Width
1/4" (6)
Rough Opening
Width
Horizontal Section
Extension Jambs for Elliptical Unit for Frenchwood® Gliding Door
Scale 3" = 1'-0" (1:4)
5/8" (16) at curve Optional Andersen®
11/16" (17) at sill inside filler strip for
transom joining over
65) 7) gAlniddienrgs edno oFrrenchwood®
Face: 2-9/16" ( Face: 2" (51) Face: 11/16" (1 1)
7-W1a/l8l" 6-W9/a1ll6" 5-W1a/l4l" 16" (116) 5-1/4" (133) 6-9/16" (167) 7-1/8" (18
/
9
4-
Unit Dim. Width
1/4" (6)
Rough Opening
Width
Horizontal Section
Extension jambs available for 4-9/16" (116), 5-1/4" (133), 6-9/16"
(167) or 7-1/8"(181) wall thickness. Other wall dimensions can be
accommodated with extension jamb modification.
REV.03/05 A R C H I T E C T U R A L D E T A I L F I L E 7-7
Specialty Windows
Trim Options and Applications—Circle and Oval
Transition Piece / Key Block
Optional Andersen®
key block
Optional Andersen®
key component
(circle style shown)
Transition piece
Circle
(Oval similar)
Optional Andersen® Optional Andersen®
transition piece transition piece Standard Andersen® transition piece stop (circle style shown)
arch casing extension jamb
7-8 A R C H I T E C T U R A L D E T A I L F I L E REV.03/05
Specialty Windows
Trim Options and Applications—Circle and Oval 5-3/8" (137mm)
Key Block/Key Component 3-3/8" (86mm)
Scale: Half
Available in maple or oak.
Key block
2" (51mm)
3-3/8" (86mm)
Key component - circle style shown
(4 sizes available or cut to fit wall depth)
1-1/2" (38mm)
1" (25mm)
3/8" (10mm)
Key block
m) m)
m m
4 5 Key component - oval style shown
2 0
1 1
8" ( 8" (
/ /
7 1
4- 4-
3/8" 7/8"
(10mm) (22mm)
1" (25mm) 3-15/16" (100mm) @ 4-9/16" (116mm) wall
4-7/16" (113mm) @ 5-1/4" (133mm) wall
5-15/16" (151mm) @ 6-9/16" (167mm) wall
6-15/16" (176mm) @ 7-1/8" (181mm) wall
REV.03/05 A R C H I T E C T U R A L D E T A I L F I L E 7-9
Specialty Windows
Trim Options and Applications—Circle and Oval
Transition Piece
Available in maple or oak.
Standard Andersen® transition piece casing
1-5/8" (41)
for 3-1/2" (89) casing
1" (25)
1-7/16" (37)
for 2-1/4" (57) and
2-1/2" (64) casing
3/8" (10)
4-1/8" (105) for 3-1/2" (89) casing
3" (76) for 2-1/4" (57) and 2-1/2" (64) casing
Optional Andersen®
1-1/2" (38)
transition piece extension jamb
for 3-1/2" (89) casing
1-3/16" (30)
9/16" (14) for 2-1/4" (57) and
2-1/2" (64) casing
Cut to fit -
36" (914) lengths available
2-11/16" (68)
Standard Andersen®
transition piece stop
(circle style shown)
7-10 A R C H I T E C T U R A L D E T A I L F I L E REV.03/05