RESERVOIR ACCESSORIES - LDI Industries, Inc.

157 Pages·2016·14.55 MB·English

RESERVOIR ACCESSORIES
TABLE OF CONTENTS
ACCESS COVERS Flexible Jaw - Spiders & Cushions ........................RA-36
Baffl e Mount — Steel and Stainless Steel ..............RA-3 Flexible Jaw - Spiders & Cushions Dimensions .......RA-37
6 Inch Access Cover ...........................................RA-4 Flexible Jaw - L Type Hubs ..................................RA-38
Baffl e Mount — Steel W/ Flow Restrictors ..............RA-4 Flexible Jaw - AL Type Hubs ................................RA-41
Removable Access Cover Bracket .........................RA-5 Flexible Jaw - C Type Hubs ..................................RA-43
Removable Access Cover with Spider ....................RA-5 Flexible Jaw Couplings - Performance Data ............RA-44
Cast Bolt Mount — DIN Type ...............................RA-6 Flexible Jaw Couplings - Dimensional Data ............RA-45
Multiple Bolt Access Covers .................................RA-6 Flexible Jaw - Splined Shaft Installation Data ........RA-46
How to Select A Flexible Jaw Coupling ..................RA-47
ACCUMULATOR BRACKETS & CLAMPS Flexible Drive Couplings - Grommets ....................RA-50
VMB Series .......................................................RA-7 Flexible Drive Couplings .....................................RA-51
VMB Series Specifi cations ...................................RA-8 Flexible Drive Couplings - Standard Bore and Key ..RA-52
Flexible Drive Couplings - Metric Bore and Key ......RA-53
AIR OIL COOLERS Flexible Drive Couplings - Set Screw Type Style AS RA-54
Oil Cooler .........................................................RA-9 Flexible Drive Couplings - Clamp Type Style AC .....RA-54
TEFC Rear Mounted Oil Cooler .............................RA-9 How to Select a Flexible Drive Coupling ................RA-55
Forced Air Oil Cooler ..........................................RA-9
FOOT MOUNTING BRACKETS
BREATHERS & FILLER BREATHERS USAF17 4-Bolt ..................................................RA-56
Top Mount — Standard Flow ................................RA-10 SAE AA 2-Bolt ...................................................RA-56
Side Mount — Standard Flow...............................RA-11 SAE A 2-Bolt .....................................................RA-57
Screw-In Breather — Nickel Plated Steel w/Filter ...RA-11 SAE B 2-Bolt .....................................................RA-57
Miniature Breather — Polymer w/Filter .................RA-12 SAE B 2/4-Bolt ..................................................RA-58
Top Mount — High Flow ......................................RA-13 SAE C 2/4-Bolt ..................................................RA-58
DES-CASE ........................................................RA-14
Series AB .........................................................RA-16 GAS ENGINE ADAPTERS
Series AB Replacement Elements .........................RA-17 Gas Engine Mounting Flange Information ..............RA-59
PEM-F Flange ....................................................RA-60
COUPLING & FLANGE CONNECTIONS LB152 Flange ....................................................RA-61
SAE/NPT Full Coupling ........................................RA-18 PEM-G Flange ...................................................RA-62
SAE/Socket Weld Full Coupling ............................RA-18 PEM-H Flange ...................................................RA-63
SAE O-Ring Boss Full Coupling ............................RA-19 PEM-HH Flange .................................................RA-64
SAE Half Coupling ..............................................RA-19
SAE Straight Thread Tee Coupling ........................RA-20 GEAR PUMPS
4 Bolt Flange - Threaded x O-Ring Face ................RA-21 Gear Pumps Information.....................................RA-65
4 Bolt Flange - Socket x O-Ring Face ....................RA-23 AP100 Series ....................................................RA-66
4 Bolt Flange - Gage Port Spacer .........................RA-24 AP212 Series ....................................................RA-67
4 Bolt Flange - Blanking x O-Ring Face .................RA-25
Elbow - 4 Bolt Flange x NPTF. ..............................RA-26 IMMERSION HEATERS
Elbow - 4 Bolt Flange x Pipe Socket .....................RA-26 ET Series ..........................................................RA-68
SAE J518 Split Flange ........................................RA-27
Suction Flanges for Pipe/Tubing ...........................RA-28 MOTOR BASE PLATES
Return Flanges for Pipe and Tubing ......................RA-29 Motor Base Plates ..............................................RA-69
Rubber Grommets for Reservoir Downpipes ...........RA-29
MOUNTING PLATES
COUPLING GUARDS Mounting Plates .................................................RA-70
CG Series .........................................................RA-30
NOISE & VIBRATION DAMPENING
CUSHION CLAMPS FOR PIPE & TUBE DEVICES
Single and Single Stack Cushion Clamps ...............RA-31 Dampening Bars - Bolt Down ..............................RA-71
Dampening Bars - Weldable ................................RA-72
FLEXIBLE SHAFT COUPLINGS 182TC thru 256TC & 213UC thru 256UC ...............RA-73
Flexible Jaw - Spider Performance Data ................RA-35 284 thru 286TC/TSC & 284 thru 286UC/USC .........RA-74
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
02/14
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-1
RESERVOIR ACCESSORIES
TABLE OF CONTENTS (CONT’D)
324 thru 405TC/TSC & 324 thru 405UC/USC .........RA-75 G620 Series ......................................................RA-117
Vertical Dampening Rings ...................................RA-76 G623 Series ......................................................RA-118
Dampening of Structure Borne Noise ....................RA-77 GT623 Series ....................................................RA-119
About the Dampening Flange ..............................RA-78 G632 Series ......................................................RA-120
Selecting a Dampening Flange. ............................RA-78 G635 Series ......................................................RA-121
Dampening Flange for a Horizontal Installation ......RA-78 G640 Series ......................................................RA-122
Dampening Flange for a Vertical Installation ..........RA-79 G642 Series ......................................................RA-123
G645 Series ......................................................RA-124
PRESSURE GAGES G1615 Series ....................................................RA-125
VPG Series .......................................................RA-80 G1620 Series ....................................................RA-126
SGC Series .......................................................RA-127
PUMP MOTOR ADAPTERS FOR ELECTRIC TMA Series .......................................................RA-128
MOTORS
56C thru 145TC & 182UC thru 184UC ...................RA-81 SIGHT PLUGS
182TC thru 256TC & 213UC thru 256UC ...............RA-83 LSP51 Series ....................................................RA-129
284 thru 286TC/TSC & 284 thru 286UC/USC .........RA-86 LSP101 Series ...................................................RA-130
324 thru 405TC/TSC & 324 thru 405UC/USC .........RA-88 LSP151 Series ...................................................RA-131
444 thru 445TSC/TC/USC/UC & 447 thru 449TSC/TC RA-90 LSP201 Series ...................................................RA-132
ANSI Pump/Motor shaft information .....................RA-91 LSP501 Series ...................................................RA-133
Standard Nema “C” Face Electric Motor Dimensions RA-92 LSP701 Series ...................................................RA-134
Pump Mounting Flange Information ......................RA-93 LSP1301 Series .................................................RA-135
Adapter Mounting Spacer....................................RA-96 LSP1351 Series .................................................RA-136
Vertical Mounting Adapter Rings ..........................RA-97
SUCTION STRAINERS
VERTICAL GASKET INFORMATION PSS Series (Nylon Hex) ......................................RA-137
Vertical Mounting Information .............................RA-98 SS Series (Steel) ...............................................RA-138
Vertical Mounting Gaskets ...................................RA-98 SSTM Series — Tank Mounted .............................RA-139
RETURN LINE DIFFUSERS TANK MAGNETS
Return Line Diff users..........................................RA-99 Tank Magnet Information ....................................RA-140
Tank Magnets ....................................................RA-141
RISERS Magnetic Drain Plugs ..........................................RA-141
Filler Breather ...................................................RA-100
Suction Flange ..................................................RA-100 APPENDICES
Return Flange ...................................................RA-100 Sight Openings & Pressure Ratings ......................RA-A1
Front Mount Gage Installation Instructions ............RA-A2
SIGHT GAGES - CLOSED CIRCUIT Back Mount Gage Installation Instructions ............RA-A3
G601 Series ......................................................RA-101 Weld Instructions for Dampening Bar ...................RA-A4
G603 Series ......................................................RA-102 Service Temperature Ranges by Seal Material ........RA-A5
GA603 Series ....................................................RA-103 G601 Series - Installation Instructions ..................RA-A6
GAT603 Series ..................................................RA-104 Gages W/Pipe Adapters Installation Instructions ....RA-A7
GT603 Series ....................................................RA-105 G613 & GT613 Series Installation Instructions .......RA-A8
G605 Series ......................................................RA-106 G623 & GT623 Series Installation Instructions .......RA-A9
G607 Series ......................................................RA-107 SGC Series Installation Instructions .....................RA-A10
G608 Series ......................................................RA-108 G603 & GT603 Series Installation Instructions .......RA-A11
G609 Series ......................................................RA-109 TMA Series Thermometer Installation Instructions ..RA-A12
G610 Series ......................................................RA-110 Immersion Heater Install and Wiring Instructions ...RA-A13
G613 Series ......................................................RA-111 Replacement Parts .............................................RA-A14
GA613 Series ....................................................RA-112
GT613 Series ....................................................RA-113
G615 Series ......................................................RA-114
G617 Series ......................................................RA-115
G619 Series ......................................................RA-116
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
02/14
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-2
ACCESS COVERS
BAFFLE MOUNT — STEEL AND STAINLESS STEEL
Access Covers (Cleanout Covers) are designed to allow access into a dry (drained) reservoir for cleaning,
inspection or mounting of components inside of the reservoir.
Standard Features: Standard Materials:
▪ Center clearance hole for mounting bolt ▪ Carbon Steel
▪ With or without drain connection ▪ 304 Stainless Steel
▪ Buna N lip gasket
▪ Reference Spec Sheet for Access Cover kits that
NOTE:
includes the mounting hardware
▪ Recommended Torque = 15 ft·lb
.66 DIA. HOLE
Carbon Steel 304 Stainless Steel
NOTE: All dimensions are inches
P/N 5084
.125 NOMINAL
P/N 5083
Access Covers: Baffl e Mount - Steel
Access *Kit w/o *Kit with 3/4 inch †Cover Only †Cover Only *Kit with †Cover Only
Cover Size Drain NPT Drain w/o Drain with Drain SAE-12 Drain with SAE-12 Drain
(inches) Part No. Part No. Part No. Part No. Part No. Part No.
10 5067 5068 5070 5072 5053-D 5053
12 5080 5080-D 5085 5086-D 5054-D 5054
14 5065 5066 5071 5073 5055-D 5055
16 5087 5087-D 5089 5090-D 5056-D 5056
18 5091 5091-D 5095 5094-D 5057-D 5057
Access Covers: Baffl e Mount - Stainless Steel Access Cover Dimensions (inches)
Access *Kit with 3/4 †Cover Only †Cover Only Access Access
Cover Size *Kit w/o Drain inch NPT Drain w/o Drain with Drain Cover Size A *B T L Hole Dia.
(inches) Part No. Part No. Part No. Part No. 10 10.75 1.50 11 GA 1.25 8
10 5067-SS 5067-D-SS 5070-SS 5072-D-SS 12 12.50 1.81 7 GA 1.75 10
12 5080-SS 5080-D-SS 5085-SS 5085-D-SS 14 14.12 1.81 8 GA 1.75 12
14 5065-SS 5065-D-SS 5071-SS 5071-D-SS 16 16.06 2.25 7 GA 2.00 14
16 5087-SS 5087-D-SS 5089-SS 5089-D-SS 18 18.50 2.62 7 GA 2.50 16
18 5091-SS 5091-D-SS 5095-SS 5095-D-SS * All "B" dimensions are reference only
*NOTE: Access Cover Kit includes - (1) access cover. (1) Buna N gasket, (1) 5/8-11 bolt, (1) Nylon washer, (1) baffl e lug
†NOTE: Access Cover only includes - (1) access cover, (1) Buna N gasket
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
11/16
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-3
ACCESS COVERS
6 INCH ACCESS COVER
Access Covers (Cleanout Covers) are designed to allow access into a dry (drained) reservoir for cleaning,
inspection or mounting of components inside of the reservoir.
Standard Features: Standard Material:
1. (1) 3/8 inch x 1-1/14 inch long hex head bolt ▪ Zinc plated carbon steel
2. (1) Nylon washer
3. Cover
4. Buna N flat gasket
5. Back cover with weld nut WELD NUT ON BACK SIDE.
DETAIL ASSEMBLY
6 Inch Access Cover
Opening Diameter Recommended Torque
Part No. (inches) (ft·lb)
V1917 4 5/8 8
BAFFLE MOUNT — STEEL W/ FLOW RESTRICTORS
Access Covers (Cleanout Covers) with fl ow restrictors are designed to help prevent hydraulic fl uid from by-passing
the baffl e cutout by fl owing around the cover dome. It will also allow access into a dry (drained) reservoir for
cleaning, inspection or mounting of components inside of the reservoir.
Standard Features: Standard Material:
▪ Center clearance hole for mounting bolt ▪ Carbon Steel
▪ One piece design
▪ With or without drain connection NOTES:
▪ Buna N lip gasket
▪ Stainless steel also available upon request
▪ Recommended Torque = 15 ft·lb
NOTE: All dimensions are inches
Access Covers: Baffl e Mount - Steel w/Flow Restrictors
Access Steel Access Cover Steel Access Cover Steel Access Cover
Dimensions
Access Cover w/Restrictor w/Restrictor w/Restrictor
Cover Size A B C Openings w/Drain w/o Drain w/SAE-12 Drain
(inches) (inches) (inches) (inches) T (inches) Part No. Part No. Part No.
12 4.50 9.88 1.50 7 GA 10.00 5080-R 50800-R 50540
14 5.00 11.88 1.50 7 GA 12.00 5065-R 5066-R 50550
16 5.62 12.12 1.75 7 GA 12.25 5087-R 50870-R 50560
18 7.50 15.88 2.25 7 GA 16.00 5091-R 50910-R 50570
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
09/18
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-4
ACCESS COVERS
BRACKET MOUNTS - STEEL
Bracket Mounted Access Covers (Cleanout Covers) are removable and designed to be used when a baffl e is
unavailable to mount the cover and when access to inside of reservoir is required . This allows access into a dry
(drained) reservoir for cleaning, inspection or mounting of components inside of the reservoir with full access
through the opening in the reservoir.
Standard Features: Standard Material:
▪ Spider bracket mounted kits are available in two sizes ▪ Carbon Steel
with different options
▪ A removable bracket style is available
▪ Quick and easy installation
REMOVABLE ACCESS COVER BRACKET
2.25
.44 X .75 SLOT 1.25
NOTE: All dimensions are inches
Removable Access Cover Brackets
Access Access Hole Each Removable Access Cover
Cover Dia Diameter A A/2 B B/2 Bracket includes:
(inches) (inches) Part No. (inches) (inches) (inches) (inches) (1) Removable Access Cover Bracket
10 8 V-5393 12.00 6.00 10.00 5.00 *(2) Studs 3/8 inch x 3/4 inch long
*(2) 3/8 inch hex nuts
12 10 V-5392 14.00 7.00 12.00 6.00
*(2) lockwashers
14 / 16 12 / 12.25 V-5390 16.25 8.12 14.25 7.12 *When installed by LDI
18 16 V-5391 20.00 10.00 18.00 9.00
REMOVABLE ACCESS COVER WITH SPIDER
ACCESS COVER SPIDER
PART NO. 5060
12 INCH / 14 INCH ACCESS COVER
PART NO. 5080/5065
HEX HEAD BOLT
5/8-11NC X 3-1/2 INCH LONG
PART NO. 5075
NOTE: All dimensions are inches NOTE: Recommended Torque = 15 ft·lb
Removable Access Cover With Spider
Access Hole
Access Cover Diameter A A/2 B
Available as kit only
Description (inches) Part No. (inches) (inches) (inches)
Each kit includes:
12 inch w/no drain 10 5060-12-S 14.00 7.00 5.31 (1) access cover with gasket
14 inch w/no drain 12 5060-14-S 14.00 7.00 5.31 (1) removable access cover spider
12 inch w/ 3/4 inch NPT Drain 10 5060-12-N-S 14.00 7.00 5.31 (1) hex head bolt
(1) Nylon washer
14 inch w/ 3/4 inch NPT Drain 12 5060-14-N-S 14.00 7.00 5.31
12 inch w/SAE-12 Drain 10 5060-12-S-S 14.00 7.00 5.31
14 inch w/SAE-12 Drain 12 5060-14-S-S 14.00 7.00 5.31
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
06/17
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-5
ACCESS COVERS
CAST BOLT MOUNT — DIN TYPE
DIN Type access covers (Cleanout Covers) are designed to allow access into a dry (drained) reservoir for cleaning,
inspection or mounting of components inside of the reservoir.
Standard Features: Standard Material:
▪ Multi-bolt mounting for positive sealing ▪ Cast Aluminum
▪ Available in two sizes
▪ Does not require a baffle for mounting
NOTES:
▪ Buna N gasket
▪ Recommended Torque = 35 in·lb
Type 324 Type 449
Access Covers: Cast Bolt Mount - DIN Type
DIN Type A B C
*Access Cover M10 Access Cover DIN Type Dia BC Cutout H
Access Cover Kit No. For Acorn Nut Gaskets (Buna N) Access Cover inches inches inches inches
Type All Parts Part No. Part No. Part No. (mm) (mm) (mm) (mm)
13.78 12.75 9.76 .70
324 136699 108499 V-6701 DIN324
(350) (324) (248) (18)
18.70 17.68 15.08 .70
449 136799 108499 V-6702 DIN449
(475) (449) (383) (18)
*NOTE: Access cover kit includes- (1) DIN type door, (1) Buna N gasket, (4) or (6) acorn nuts. Access cover includes (1) DIN type
door and (1) Buna N gasket
MULTIPLE BOLT ACCESS COVERS
Multiple Bolt Access Cover (Cleanout Cover) are designed to allow access into a dry (drained) reservoir for
cleaning, inspection or mounting of components inside of the reservoir.
Standard Features: Standard Material:
▪ Multi-bolt mounting bolts for positive sealing ▪ Carbon Steel
▪ Larger access hole in the reservoir
▪ Available in different sizes
NOTES:
▪ Does not require a baffle for mounting
▪ Recommended Torque = 25 ft·lb
Multiple Bolt Access Cover
Access Access Buna N
Cover Size Hole Size A B C Qty Gasket
(inches) (inches) Part No. (inches) (inches) (inches) D T Part No.
18x18 16x16 5334 18.00 18.00 .44 16 .25 5335
12x14 10x12 5283 14.00 12.00 .44 16 .25 5079
24x24 20x20 5338 24.00 24.00 .44 24 .25 5339
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
05/16
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-6
ACCUMULATOR BRACKETS & CLAMPS
VMB SERIES
Mounting Brackets are designed to provide simple and secure mounting for accumulators, cylinders and fi lter
housings.
Standard Features: Standard Material:
▪ Rubber cushioning to reduce vibration and noise ▪ Rubber ring - Buna N, 70 Durometer
▪ Compensation for thermal expansion and contraction
▪ Exclusively designed for all types of accumulators,
cylinders and filter housings
▪ Clear Zinc plated to resist corrosion
▪ Single Bolt Clamp
▪ Double Bolt Clamp
VMB CLAMP
VMB CLAMP
Optional
Rubber Ring
Base Bracket
Type 1 Type 2
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
02/14
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-7
ACCUMULATOR BRACKETS & CLAMPS
VMB SERIES SPECIFICATIONS
VMB Series Clamps - Type 1 and Type 2
inches Piece
Weight
Part No. A B C D H K Width (lbs)
CLAMP-TYPE 1
VMB-42 5.43 3.94 5.91 4.25 2.52 — 1.25 1.60 DIA
VMB-45 5.26 3.94 6.68 4.51 2.87 — 1.25 1.80
VMB-50 6.89 5.35 7.12 4.96 3.03 — 1.25 1.80
VMB-57 6.63 5.35 7.75 5.75 3.50 — 1.25 2.00
VMB-66 7.50 6.02 9.00 6.75 3.94 — 1.25 2.30 .38 x .50 SLOT
CLAMP-TYPE 2
VMB-81 10.24 8.19 9.06 8.11 4.65 10.83 1.50 3.20
VMB-89 10.00 8.50 9.89 9.12 4.95 12.48 1.50 3.40 Single Bolt Clamp - Type 1
NOTE: All dimensions are inches
VMB Series Clamp - Base Brackets and Rubber Ring
inches Piece
Weight
Part No. A B C D E F G H L (lbs)
Base Bracket
VMB-47 10.24 7.87 3.94 4.72 2.95 1.38 8.86 3.62 .67 5.5 DIA
VMB-67 10.24 7.87 3.94 6.69 2.95 1.38 8.86 4.84 .67 5.3
Rubber Ring
VMB-425 5.91 4.72 4.69 4.25 .79 .59 Use with VMB-47 Base Bracket .59 DIA
VMB-625 7.87 6.69 6.65 6.26 .79 .59 Use with VMB-67 Base Bracket
Note: Base Bracket and Rubber Ring must be ordered as separate items
Double Bolt Clamp - Type 2
Base Bracket
DIA. Rubber Ring
DIA.
.67 DIA DIA.
DIA.
DIA.
Nominal diameter required for bladder accumulators Nominal diameter required for piston type accumulators Note: *No Rubber Ring
Accumulator Clamp Dia Base Accumulator Clamp Dia Base* Accumulator Clamp Dia Base*
Size Part No. Qty (inches) Bracket Size Part No. Qty (inches) Bracket Size Part No. Qty (inches) Bracket
1.00 qt VMB-45 1 4.50 — 1.00 qt VMB-45 1 4.50 — 4.00 gal VMB-81 1 8.00 VMB-67
2.00 qt VMB-45 1 4.50 — 2.00 qt VMB-45 1 4.50 — 5.00 gal VMB-57 3 5.50 —
1.00 gal VMB-66 1 6.70 VMB-47 1.00 gal VMB-45 1 4.50 — 5.00 gal VMB-66 2 7.00 VMB-47
2.50 gal VMB-89 1 9.00 VMB-67 1.00 gal VMB-57 2 5.50 — 5.00 gal VMB-81 1 8.00 VMB-67
5.00 gal VMB-89 2 9.00 VMB-67 1.00 gal VMB-66 1 7.00 VMB-47 5.00 gal VMB-89 1 9.00 VMB-47
7.50 gal VMB-89 2 9.00 VMB-67 1.50 gal VMB-45 2 4.50 — 7.50 gal VMB-66 2 7.00 VMB-67
10.00 gal VMB-89 2 9.00 VMB-67 1.50 gal VMB-57 2 5.50 — 7.50 gal VMB-81 2 8.00 VMB-67
15.00 gal VMB-89 3 9.00 VMB-67 1.50 gal VMB-66 1 7.00 VMB-47 7.50 gal VMB-89 1 9.00 VMB-67
2.00 gal VMB-45 1 4.50 — 10.00 gal VMB-81 2 8.00 VMB-67
2.50 gal VMB-57 2 5.50 — 10.00 gal VMB-89 2 9.00 VMB-67
2.50 gal VMB-66 1 7.00 VMB-47 15.00 gal VMB-81 2 8.00 VMB-67
Note: All dimensions and weights are for 2.50 gal VMB-81 1 8.00 VMB-67 15.00 gal VMB-89 2 9.00 VMB-67
general information only. Since products are
in continual state of refi nement, please verify 3.00 gal VMB-57 2 5.50 — 17.50 gal VMB-89 3 9.00 VMB-67
all critical dimensions with our engineering 3.00 gal VMB-66 1 7.00 VMB-47 20.00 gal VMB-81 3 8.00 VMB-67
department.
3.00 gal VMB-81 1 8.00 VMB-67 20.00 gal VMB-89 3 9.00 VMB-67
4.00 gal VMB-57 2 5.50 — 23.00 gal VMB-89 3 9.00 VMB-67
4.00 gal VMB-66 1 7.00 VMB-47 25.00 gal VMB-89 4 9.00 VMB-67
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
03/14
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-8
AIR OIL COOLERS
Air Oil Coolers are used to cool fl uid power systems, gear drives, machine tools, torque converters and hydraulic presses.
Standard Features:
▪ Oil Cooler ▪ AC Fan Driven Oil Cooler
▫ Rugged construction that resists vibration ▫ Compact, quiet, efficient design
▫ 1/2 inch NPT internal thread mounting connection ▫ Rugged construction resists vibration and stress
▪ TEFC Rear Mount Oil Cooler ▫ Mounting brackets included
▫ Compact, efficient design ▫ Operating Pressure - 300 PSI
▫ Low cost case drain cooling ▫ Operating Temperature - 350°F
▫ Mounts behind existing TEFC motor ▫ Air filter has Stainless Steel frame with washable media
▫ Mounting backets and gasket
▫ Operating Pressure - 300 PSI
▫ Operating Temperature - 350°F
▫ Air filter has Stainless Steel frame with washable
media
OIL COOLER
▪ Highly Efficient Design
▪ Rugged Construction Resists Vibration
PERFORMANCE CURVES
Order Data / Specifi cations
Flow Piece
Range HP Heat Weight
Part No. (GPM) Removed (lbs)
VOC-5-P 0.3-2 1.0 3.0
TEFC REAR MOUNTED OIL COOLER
▪ Uses air stream from fan of electric motor
▪ Sized to fit popular electric motor frame sizes
▪ Durable powder painted cabinet
▪ Maximizes efficiency with contoured air side fins
and internal oil turbulators
▪ Includes motor gasket and mounting bracket
▪ Fits Nema frame sizes 48 thru 184T
Order Data / Specifi cations
▪ VOC-5-P Performance: D-Rate
Flow Piece VOCS-DP Curve by 25 %(When used
Range HP Heat Weight behind TEFC motor)
Part No. (GPM) Removed (lbs)
Bracket Adjustment .75 inch and 2.25 inches Upward ▪ Curves are based in a 40°F
1.00 inch Downward (from position shown) VOCS-5-P 0.3-2 1.0 6.0 approach temperature (oil out
°F-amb air °F)
FORCED AIR OIL COOLER ▪ Oil Press Drop Coding
= 5 PSI
▪ Compact, highly efficient design with contoured
= 10 PSI
7.50 side fins and internal oil turbulators
= 20 PSI
▪ Rugged construction resists vibration and stress
▪ Eliminates sewer and water costs
▪ Average Oil Viscocity = 100 SSU for
▪ Mounting bracket included for easy installation
performance rating
▪ Motor voltage 115/230 single phase, 50/60
▪ All models above:
hertz, 1.2/.60 amps
▫ Maximum Pressures — 300 P.S.I.
Order Data / Specifi cations
▫ Maximum Temperature —350° F
Flow Piece
Bracket Adjustment .75 inch and 2.25 inches Upward Range HP Heat Weight
1.00 inch Downward (from position shown) Part No. (GPM) Removed (lbs)
NOTE: All dimensions are inches VOCSM-5-P 0.3-2 1.0 13.0
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
02/14
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-9
BREATHERS & FILLER BREATHERS
TOP MOUNT — STANDARD FLOW
Top Mount Filler Breathers are designed to be used as a fi ller port for tanks, hydraulic power units or other fl uid
containers. These units also let the tank breathe while keeping out airborne particles.
Standard Features:
▪ Bayonet zinc plated steel cap - large capacity
▪ Twist to lock removable cap breathes and filters air
▪ Concealed air vents allowing for outdoor applications
▪ Flute finger inserts for easy gripping (vented style
only)
▪ 10 or 40 micron filtration (vented style only)
▪ Safety chain - prevents loss of cap
▪ Heavy duty Cork-Neoprene gasket provides a positive
seal between flanges
▪ Zinc plated flange - bayonet flange (SAE J829)
▪ Strainer basket
▫ 4 inch long Nylon with solid dome bottom to
prevent punchout
▫ 3 inch long Stainless Steel, 30 mesh
▪ Thread forming screws -- prevents particles from
entering reservoir during installation by forming
threads rather than cutting them
Standard Bayonet Style Non Vented Bayonet Style
Mounting Information
G
NOTE: All dimensions are inches
Technical and Dimensional Details
Oil Bayonet Flange
Air Filtration Air Flow Transfer (inches)
Cap Breather Strainer Nominal Capacity Rate
Part No. Style (PSI) Basket Type Level Media (CFM) (GPM) A B C D E F G
Non-Pressurized, Standard Filler Breather - Bayonet Style
5201 Standard N/A Nylon 40 Micron Foam 25 192 6.101.902.303.803.003.252.88
5204 Standard N/A Nylon 10 Micron Foam 15 115 6.101.902.303.803.003.252.88
5216 Standard N/A Stainless Steel 40 Micron Foam 25 192 5.101.902.302.803.003.252.88
5220 Standard N/A Stainless Steel 10 Micron Foam 15 115 5.101.902.302.803.003.252.88
Pressurized, Standard Filler Breather - Bayonet Style
5205 Standard 5 Stainless Steel 10 Micron Foam 25 192 5.101.902.302.803.003.252.88
Non-Pressurized, Non-Vented Filler Breather - Bayonet Style
5232 Non Vented N/A Nylon N/A N/A N/A N/A 6.101.901.303.802.443.252.88
5227 Non Vented N/A Stainless Steel N/A N/A N/A N/A 5.101.901.302.802.443.252.88
Non-Pressurized, Metric Mounting Filler Breather - Bayonet Type
5203 Standard N/A Nylon 40 Micron Foam 25 192 6.101.902.303.803.003.252.88
Ordering Information Options
▪ For Locking Tabs add LT to part number (3/8 inch dia. hole to accept padlock)(not available in non vented breathers)
Dimensions and specifi cations are subject to change without notice. Not all items are Made-To-Stock, contact us for availability.
07/17
Ph : 920-682-6877 [email protected]
Fx : 920-684-7210 www.ldi-industries.com
Pg RA-10