Remote Access Instructions.pdf (PDFy mirror)

0.02 MB·English

Remote Access Instructions
Our public IP is mine.asicspace.com
We will assign you a port, and give you all of the IP addresses of your miners on our internal network.
Download putty at: http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe
Input the following under Session. Replace the Port shown here with the one we have assigned you.

Suppose the internal IP of one of your miners is 10.240.18.188
Now on the left go to Connection > SSH > Tunnels:
Input the following replacing the IP used here with the IP of your miner on our internal network. Make
sure to put “:80” after the IP of your miner.

Now click add, then go back to the original page by click Session on the top left.
Now save your profile, naming the profile the last three digits of your miner’s internal IP.
Now click Open. For most miners, the login/pw for SSH is root/root.

Now open a web browser, and type in http://localhost

You should now see the login page of your miner. Repeat this process for the IP of each of your miners,
except increase the source port by 1 for each additional miner (81,82,83,etc.) when making a
configuration in the Tunnels section of putty.