REFERENCES Abd. Majid, MZ, & McCaffer, R. (1988).

54 Pages·2012·3.53 MB·English

REFERENCES

Abd. Majid, M. Z., & McCaffer, R. (1988). Factors on non-excusable delays that
influence contractors’ performance. Journal of Management in Engineering, Vol.
14, No.3, 42-49.

Ahmed SM, Azhae S, Kappagntula P, Gollapudial D (2003). Delays in construction: A
brief study of the Florida construction industry. Proceeding of the 39th Annual
ASC Conference, Clemson University, Clemson, SC, pp. 257-266.

Ali, S.A., Rahmat,I.& Hassan,H.(2008).Involvement of key design participants in
refurbishment design process, Facilities. Emerald, UK. Vol. 26 No. 9/10 pp 389-
400

Ali, S.A., Rahmat,I. & Noorhashimah N.(2006). Information in the design process of
refurbishment projects. 5th MICRA 2006, Kulliyyah of Architecture and
Environmental Design, UIAM, 20-21 June 2006, pp 128-400

Ali, S.A., Rahmat,I. & Noorhashimah, N. (2006).Integrative mechanisms in the design
process of refurbishment projects. International Conference of the Built
Environment in the 21st Century, Renaissance Hotel Kuala Lumpur, 13-15 June
2006, pp 699-708

Ali, S.A.& Rahmat,I. (2009). Coordination Methods in Managing the Design Process of
Refurbishment Projects. Journal of Building Appraisal Palgrave, UK. pp. 87-98

Ali. S.A, Syahrul N. K & Salleh, H. (2009) "The characteristics of refurbishment
projects in Malaysia", Facilities, Vol. 27 Iss: 1/2, pp.56 – 65

Al-Momani, A. H. (2000). Construction delay: quantitative analysis. International
Journal of Project Management, 18, 51-59.

Andi & Minato, T. (2003a). Design documents quality in Japanese construction
industry. International Journal of Project Management, Vol. 21, 537-546.

Andi & Minato, T. (2003b). Representing causal mechanism of defective designs: a
system approach considering human errors. Journal of Construction Management
and Economics, Vol. 21, 297-305.

Andi, & Minato, T. (2004). Representing causal mechanism of defective designs:
Exploration through case studies. Journal of Construction Management and
Economics, Vol. 22, 183-192.
145
Arain, F.M. and Low, S.P. (2005), “The potential effects of variation orders on
institutional building projects”, Facilities. Emerald, UK. Vol. 23 No. 11/12 pp.
496-510.

Arditi, D., & Gunaydin, H. M. 1977. Total quality management in the construction
process. International Journal of Project Management, Vol. 14, No.2, 81-87.

Arditi, D., Koksal, A., & Kale, S. 2000. Business failure in the construction industry.
Engineering, Construction and Architectural Management, Vol. 7, No. 2, 120-
132.

Ashley, D.B. (1986), “ new trends in risk management”, paper presented at the
internet’s 10th International Expert Seminar on New Approaches in Project
Management, Zurich, 10-12 March.

Assaf, S. A., Al-Khalil, M., & Al-Hazmi,M. (1994). Causes of delay in large building
construction projects. Journal of Managementin Engineering, Vol.11, No.2, 45-
50.

Atkinson, R. (1999), “Project management: cost, time and quality, two best guesses and
a phenomenon, it’s time to accept other success criteria”, International Journal of
Project Management, Vol 17 No, 6, pp, 337-42.

Babbie, E. R. (2003). The practice of social research. California: Wadsworth Publishing
Company, Inc.

Baccarini, D. (1996). The concept of project complexity- a review. International Journal
of Project Management, Vol. 14, No. 4, 201-204.

Baccarini, D.(1999). The logical framework method for defining project success.
Project Management Institute, Vol.30, No 4, 25-32.

Baldwin, A. N., Austin, S. A., Hassan, T. M. & Thorpe (1999). Modelling information
flow during the conceptual and schematic stages of building design. Journal of
Construction Management and Economics, Vol.17, 155-167.

Baldwin, J.D., Manthei, J.M., Rothbart, H., & Harris, R.B. (1971). Causes of delay in
construction industry. Journal of Construction Division, ASCE, Vol.97, No.C02,
177-187.

146
Bassioni, H.A., Price, A.D.F. & Hassan, T.M. (2005). Building a conceptual framework
for measuring business performance in construction: an empirical evaluation.
Journal of Construction Management and Economics, Vol. 18, 73-182.

Beckmann, P. & Bowels, R. (2004). Structural Aspects of Building Conservation.
Elsevier Butterworth-Heinemann Ltd, Oxford.

Beger, H., Wolf, H.F. & Ullmann, E. 1989. Handbook der Sozialistischen Forschung.
Methodologies, Method, Techniques, Berlin: Academy Verlag.

Bennett, J. & Fine, (1980). Measurement of complexity in construction projects. Journal
of Construction Management and Economics, Vol.2, 225-263.

Bennett, J. (1983). Office Refurbishment: Contracts and Organization. Architects
Journal, 178(48), 69-70.

Bennett, J. (1991). International construction project management general theory and
practice. Butterworth-Heinemann Ltd, Oxford.

Bennett, J. (2002). Construction the third way. Butterworth-Heinemann Ltd, Oxford.

Bloomberg, I. (1992). Careful renovation-obstacle and possibilities, Proceeding
innovations in management, maintenance & modernisation of building, 28-30
Oct. 1992 Rotterdam-Holland, Vol. 4 Theme 6, Paper 6.5.

Building Research Establishment (BRE) (2002) Tall Buildings and Sustainability
Report, BRE, London, UK.

Bouma, G., Atkinson, G. (1995). Social Science Research: a comprehensive and
practical guide for students (2nd ed.) Oxford: Oxford University Press.

Boyd, D. & Weaver, O.P. (1994). Improving the management and operation of
refurbishment projects, Proceedings of the 10th. ARCOM Annual Conference, 14-
16 September, 1994, Loughbrough University of Technology, UK.

Brandon, P.S. and Powell, J.A. Quality and profit building design E & F N Spon,
London. Pp 339-349

Building And Construction Authority (2010). Contract Administration Public Sector
Standard Of Contract For Construction Works.
147
Burati, J.L., Farrington, J.J. & Ledbetter, W.B. (1992). Causes of quality deviation in
design and construction. Journal of Construction Engineering and Management
Vol. 118, No. 1, 34-49.

Casley, D.J., and K. Kumar. 1988. The collection, Analysis and Use of Monitoring and
Evaluation Data. Baltimore, MD: Johns Hopkins University Press for the World
Bank.

Chalabi, A.F., & Camp, D. (1984). Causes of delays and overruns of construction
projects in developing countries. Proceedings of the CIB, W65, Vol 3, 723-734.

CIDB, (2007). Construction quarterly statistical bulletin- fourth quarter 2006. CIDB,
Malaysia.

Clancy, B. P. (1995). New building from old: some views of refurbishment projects.
Journal of The Structural Engineer. Vol. 73, No. 20/17, 341-346.

Clancy, B.P. (1994). The role of the structural engineer in maintaining the built
environment. Journal of The Structural Engineer. Vol. 72, No. 21/1, 365-368.

Coles, J.E., 1990. Design Management: A study of practice in the building industry.
Occasional Paper No. 40. The Chartered Institute of Building, Ascot UK.

Cooper, R. & Press, M. (1995). The Design Agenda, A guide to successful design
management. John Wiley and Sons, Inc, USA.

Creswell, J.W. (1994). Research design: qualitative and quantitative approaches.
Thousand Oaks, CA: Sage.

Daoud, (1997). The Architect/Engineer’s role in rehabilitation work. Journal of
Construction Engineering and Management Vol. 123, No. 1, 1- 5.

Diekmann, J. E., & Girard, M.J. (1995). Are contract disputes predictable? Journal of
Construction Engineering and Management, Vol. 121, No.4 355-363.

Diekmann, J. E., & Nelson, M.C. (1985). Construction claims: frequency and severity.
Journal of Construction Engineering and Management, Vol. 111, No.1, 74-81.

148
Dvir, D., Raz, T., & Shenhar, A.J. (2003). An empirical analysis of the relationship
between project planning and project success. International Journal of Project
Management, 21, 89-95.

Economic Review Committee Sub-committee on Domestic Enterprises, 2011

Egan, J. (1998) Rethinking construction. Department of the Environment, Transport and
the Regions.

Egbu, C.O. (1994). Management education and training for refurbishment work within
the construction industry, PhD thesis Department of Civil Engineering, University
of Salford, UK.

Egbu, C.O. (1995). Perceived degree of difficulty of management tasks in construction
refurbishment work. Building research and information Vol. 23, No. 6, 340-344.

Egbu, C.O. (1997) Refurbishment management: challenges and opportunities. Building
research and information Vol. 25, No. 6, 338-347.

Egbu, C.O. (1999) Skills, knowledge and competencies for managing construction
refurbishment works. Journal of Construction Management and Economics 17,
29-43.

Egbu, C.O., Young, B.A. & Torrance, V.B. (1996). Refurbishment management
practices in shipping and construction industries- lesson to be learned. Building
Research and Information Vol. 24, No. 6, 329-338.

Egbu, C.O., Young, B.A. and Torrance, V.B. (1998). Planning and control processes
and techniques for refurbishment management. Journal of Construction
Management and Economics, Vol. 16, 315-325.

Elinwa, A. U., & Joshua, M. 2001. Time – overruns factors in Nigerian construction
industry. Journal of Construction Engineering and Management, Vol. 127, No. 5,
419-425.

Erling S. Andersen, David Birchall, Svein Arne Jessen, Arthur H. Money, (2006)
"Exploring project success", Baltic Journal of Management, Vol. 1 Iss: 2, pp.127
– 147

Friedman, D. & Oppenheimer, N. (1998). The design of renovations. W. W. Norton &
Company New York, London.
149
Frimpong, Y., Oluwoye, J., & Crawford, L. (2003). Causes of delay and cost overruns
in construction of groundwater projects in a developing countries: Ghana as a case
study. International Journal of Project Management, 21, 321-326.

Gardiner, P.D., & Simmons, J.E.L. 1992. Analysis of conflict and change in
construction projects. Construction Management and Economics, 10, 459-478.

Georgy, M.E., Chang, L.M. & Zhang, L. (2005). Journal of Construction Engineering
and Management Vol. 131, No. 5, 548-557.

Global Construction 2020. (2009). Global Construction Perspectives and Oxford
Economics.

Griffith, A. F., Gibson Jr., E. G., Hamilton, M. R., Tortora, A. L., & Wilson,
C.T.(1999). Project success index for capital facility construction projects. Journal
of Performance of Constructed Facilities, Vol. 13, No.1, 39-45.

Harris, C.M. (2006). Interior fit out of commercial office space. CPD Talk of The
Chartered Institute of Building, November, Malaysia.

Hashim, S., Kadir, M. R.A., Lew, Y.L., & Sim, Y.C. (2003). Estimation of minimum
working capital for construction projects in Malaysia. Journal of Construction
Engineering and Management, Vol. 129, No.4. 369-374.

Hong, T.J. (2005). Statistical techniques in business research a practical approach.
Pearson Prentice Hall, Malaysia.

John, J.A., Whitaker, D. & Johnson, D.G. (2001). Statistical thinking for managers.
Chapman and Hall/CRC, United States.

Kagioglou, M., Cooper, R, and Aouad, G, 2001, “Performance management in
construction: a conceptual framework:, Construction Management and
Economics, Vol. 19 No. 1, pp. 85-95.

Kaming, P. F., Olomolaiye, P.O., Holt, G. D., & Harris, F, 1997. Factors influencing
construction time and cost overruns on high-rise projects in Indonesia.
Construction Management and Economics, 15, 83-94.

150
Krejcie, R.V. & Morgan D.W. 1970. Determining sample size for research activities.
Educational and Psychological Measurement, Vol. 30, 607-610.

Krippendrof, F. (1980). Content analysis: an introduction to its methodology. Saga,
London.

Koontz, H. and O’Donnel, C. (1972). Principles of management: an analysis of
managerial functions, 5th edition, McGraw-Hill, Tokyo. Pp 199-227

Kometa, S.T. Olomolaiye, P.O. & Frank, C.H. (1994). Attributes of UK clients
influencing project consultant’s performance. Journal of Construction
Management and Economics, Vol. 12, 433-443.

Kumaraswamy, M. M. (1997). Conflicts, claims and disputes in construction.
Engineering, Construction and Architectural Management, Vol. 4, No. 2 95-111.

Kumaraswamy, M. M., & Chan, D. W. M. (1998). Contributors to construction delays.
Construction Management and Economics, 16,17 -29.

Latham, M. (1994). Constructing the Team. H.M.S.O.

Laufer, A., Shapira, A. and Cohenca-Zall, D. (1993). Pre-bid and pre-construction
planning process. Journal of Construction Engineering and Management, Vol.
119, No. 3, 426-443.

Laufer, A., Tucker, R.L., Shapira, A., and Shenhar, A.J. (1994). The multiplicity
concept in construction project planning, Construction Management and
Economics, 11, 53-65.

Lee, A., Cooper, R. and Aouad, G. (2000),” A methodology for designing performance
measures for UK construction industry”, paper presented at Bizarre Fruit
Postgraduate Research Conference on the Built and Human Environment, Salford.

Lee, B., Bouchlaghem, D. & Austin, S. (2003). Design management in practice: testing
a training initiative to deliver tools ad learning. Construction Innovation, Vol. 3,
217-229.

Lee, Jae-Seob. 2007. Delay analysis using linear schedule in construction.AACE
International Transactions.

151
Lee, J.H. (1996). Statistical deterioration models for condition assessment of older
buildings, PhD thesis. Wayne State University, Nebr.

Liaw, S.H. & Goh, K.L. (2002). Statistik asas: konsep & amalan. McGraw-Hill
(Malaysia) Sdn. Bhd, Kuala Lumpur.

Lind, D.A., Marchal, W.G. and Wathen, S.A. (2003). Basic Statistics For Business and
Economics. McGraw Hill, United States.

Lin, G. and Shen, Q., (2007). Measuring the performance of value management studies
in construction critical review. Journal of Management in Engineering, ASCE,
23(1), 2-9.

Liu, A.M.M., & Walker, A.(1998). Evaluation of project outcomes. Construction
Management and Economics, 16, 209-219.

Long, N.D., Ogunlana, So.O., & Lan, D.T.X. (2004a). A study on project success
factors in large construction projects in Vietnam. Journal of Engineering,
Construction and Architectural, 11. 404-413.

Love, P.E.D. & Edwards, D.F. (2004). Determinants of rework in building construction
projects. Journal of Engineering, Construction and Architectural Management,
Vol. 11, No. 4, 259-274.

Love, P.E.D. & Wyatt, A.D. (1997). Communication and rework: Case studies of
construction projects, CSIRO. DBCE DOC 97/38 (B), Australia.

Love, P.E.D., Holt, G.D. & Li, H. (2002). Triangulation in construction management
research. Journal of Engineering, Construction and Architectural Management,
Vol. 9, N0. 4, 294-303.

Love, P.E.D., Mandal, & Li, H. (1999), Determine the causal structure of rework
influences in construction. Journal of Construction Management and Economics,
Vol. 17, 505-517.

Love, P.E.D., Mandal, P. Smith, J. & Li, H. (2000). Modelling the dynamics of design
error induced rework in construction. Journal of Construction Management and
Economics, Vol. 18, 567-574.

152
Love, P.E.D., Skitmore, M. & Earl, G. (1998). Selecting a suitable procurement method
for a building project. Journal of Construction Management and Economics, Vol.
16, 221-233.

Mahr, W. 1995. Politishe struktur der sozialforschung. Leipzig:Selbstverlag.

Manavazhi, M.R. & Xunzhi, Z. (2001). Productivity oriented analysis of design
revisions. Journal of Construction Management and Economics, Vol. 19, 379-391.

Manavazhi, M.R. (2004). Assessment of propensity for revisions in design projects
through the dichotomous characterization of designer effort. Journal of
Construction Management and Economics, Vol. 22, 47-54.

Mao, Z., Goh, B.H., Shou, Q.W. & Ofori, G. (2003). Total factor productivity growth
accounting in the construction industry of Singapore, Construction Management
and Economics, 21:7, 707-718.

Markus, T.A. (2003). Lesson from the design quality indicator. Building Research and
Information, Vol. 31, No. 5, 399-405.

Marsh, P. (1983). The refurbishment of commercial and industrial buildings.
Construction Press, London.

Marsh, P. (1983). The refurbishment of commercial and industrial buildings.
Construction Press, London.

Mbugua, L. A. Harris, P., Holt, G.D., & Olomalaiye, P.P.(1999, September 15-17). A
framework for Determining Critical Success Factors Influencing Construction
Business Performance. Paper presented at ARCOM fifteenth Annual Conference,
Liverpool, UK.

McKim, R., Hegazy, T., & Attala,. M. (2000). Project Performance control in
reconstruction projects. Journal of Construction Engineering and Management,
Vol, 126, No. 2, 137-141.

Meng, Y.C. (1994). Time & cost performance of building contracts in Australia and
Malaysia. Unpublished Msc Dissertation, University of South Australia.

Meng. Y.C. (1994). Time & Cost performance of building contracts in Australia and
Malaysia. Unpublished MSc Dissertation, University of South Australia.

153
Mezher, T., & Tawil. W. (1998). Causes of delays in the construction industry in
Lebanon. Engineering, Construction and Architectural Management, Vol. 5, No.
3, 252-260.

Ministry of Trade and Industry Singapore. (2010). Economic Survey of Singapore,
Second Quarter 2010.

Mintzberg, H. (1981). Research notes and communications, what is planning anyway?
Strategic Management Journal, 2, 319-24.

Moselhi, O. and Nicholas, M.J. 1990. Hybrid expert system for construction planning
and scheduling, Journal of Construction Engineering and Management, ASCE,
116(2), 221-38.

Munns, A.K and Bjeirmi, B.F, (1996), “The role of project management in achieving
success”, International Journal of Project Management, Vol, 14 No2, pp, 81-7.

Munns, A.K., & Bjeirmi, B.F. (1996). The role of project management in achieving
project success. International journal of Project Management, Vol. 16, No.1 , 1-8.

Mustapha, F. H., & Naoum, S. 1988. Factors influencing the effectiveness of
construction site managers. International Journal of Project Management, Vol. 16,
No.1, 1-8.

National Environment Agency. (2011) Guide to Singapore’s weather. Meteorological
Services.

Neely, A., Adams, C, and Kenerley, M. 2002, “The performance prism; the scorecard
for measuring and managing business success”, Financial Times, Prentice-Hall,
London.

Nachmias, C., & Naclumias, D. (1991). Research Methods in the Social Sciences(2nd
ed.). London: St Martin Press Inc.

Naoum, S.G. (1998). Dissertation research and writing for construction students.
Butterworth-Heinemann, Oxford.

Nkado, R. N. (1995). Construction time-influencing factors: the contractor’s
perspective. Construction Management and Economics, 13, 81-89.

154