Railway Catenary Fittings

201 Pages·2012·11.21 MB·English

Railway Catenary
Fittings

EXCLUSIVE AUSTRALIAN DISTRIBUTORS
ONLINE-CATALOGUE
B601/1 B661/1 Dropper clamps for contact wire and carrier cable

identification- fig. cross section a b c 3) I1 I2 srew / nut mass appr.
number mm² standard / Ebs-No.
material / dimension
4) contact wire1) messenger wire2) kg / 100 pices
DIN 933 / DIN 934
F11358A01 heigh grade copper alloy
70 M10x40 / M10
30 28 11 30 36
D = 10,5 DIN 933 / DIN 934
F11358A02 A2-80
M10x40 / M10
1a / 1b 80 - 150 18
DIN 933 / DIN 934
B661001A01 heigh grade copper alloy
50 M10x40 / M10
30 28 11 31 36
D = 9,0 DIN 933 / DIN 934
B661001A02 A2-80
M10x40 / M10

1) contact wire shape AC acc. EN 50149 corr. Ri acc. DIN 43141 T1
2) conductors made of copper or copper alloy acc. to DIN 48 201 T1 or T2
3) clamps adapted for dropper wire 10 mm² and 16 mm²
4) clamps acc. NS specifications

Material / finish:

Clamp body: high grade copper alloy, forged
Screws and nuts: see table

Application / mounting information:

Dropper clamps for contact wire and carrier cable in hangers for catenary systems as in picture 2 are universally used for clamping the contact wire or carrier cable.

The clamping parts on the contact wire or carrier cable have to be cleaned from dirt and oxide layer by means of a cleaning brush,
for example as per page B198/1, before mounting.
Stand: 02. November 2007
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Dropper clamps for contact wire and carrier cable/
Gedruckt am: 16. Januar 2012 1 / 200
ONLINE-CATALOGUE

After having put on the wires the screws of the clamps have to be tightened with a torque of 39 Nm.

fig. 2

Stand: 02. November 2007
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Dropper clamps for contact wire and carrier cable/
Gedruckt am: 16. Januar 2012 2 / 200
ONLINE-CATALOGUE
B601/2 Dropper clamps for carrier cable

fig. 1 fig. 2

identification Ebs-no. fig. cross section a b c 2) l screw / nut mass appr.
number 3) messenger wire1) (mm2) standard-no. kg/100 pc.
material / dimensions
F02557A02 Ebs 05.95.15 25 / D = 6,3 mm 30 24 10 28 16
F02556A02 Ebs 07.42.21 70 / D = 10,5 mm 30 24 10 28 DIN 933 / DIN 934 16
1
F11357A02 - 120 / D = 14,0 mm 30 28 11,5 33 A2-80 / M10x35 / M10 19
F02528A03 Ebs 07.42.20 150 / D = 15,8 mm 30 24 10 31 17

1) messenger wire made of copper or copper alloy acc. DIN 48 201 T 1 or T2
2) Clamps with c = 10 mm only applicable for dropperwire 10 mm² flex. Bz and with c = 11,5 mm for wires 16 mm² flex. Bz
3) Clamps acc. NS specifications

Material / finish:

Clamp body: high grade copper alloy, forged
Screws and nuts: see table

Application / mounting information:

Dropper clamps for carrier cable in hangers for catenary systems as in picture 2 are used for clamping the carrier cable.

The clamping part of the carrier cable has to be cleaned from dirt and oxide layer by means of a cleaning brush, for example as per page B198/1, before mounting.

After having put on of the carrier cable the screws and nuts of the clamps have to be tightened with a torque of 39 Nm.

Stand: 19. Januar 2009
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Dropper clamps for carrier cable/
Gedruckt am: 16. Januar 2012 3 / 200
ONLINE-CATALOGUE
B611/1 Dropper clamps for contact wire

identification- standard / fig. contact wire a b h l screw / nut mass appr.
number Ebs-No. cross secion +1 ≈ standard / Ebs-No. kg/100 pieces
mm² 0 material / dimension
Ebs 20.20.21 / DIN 934
5311115 1) Ebs 07.42.12 Bl.2 1 5,5 A2-70
M10x30 / M10
DIN 933 / DIN 934
5311117 - 1/2 high grade copper alloy
M10x30 / M10
7
DIN 933 / DIN 934
5311118 - 1/2 80 - 150 2) 30 9 45 high grade copper alloy 11
M10x35 / M10
DIN 43 147-3 / DIN 934
Ebs 07.42.12 Bl.1
5311119A1 4 high grade copper alloy
DIN 43 147-A
M10x35 / M10
4
3) / DIN 934
5311119A2 - A2-70
M10x30 / M10

1) for use at messenger wire see B611/2
2) contact wire shape AC acc. EN 50149 corr. Ri acc. DIN 43141 T1
3) dimension and shape acc. to DIN 43 147-3

Material / finish:

Clamp body: high grade copper alloy
Screws and nuts: see table

Application / mounting information:

Dropper clamps for contact wire as in picture 5 are used to connect the hanger cable with the contact wire.
For mounting take notice of the user requirements.
The screws M10 of the clamps have to be tightened with a torque of 25 Nm

Stand: 10. September 2009
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Dropper clamps for contact wire/
Gedruckt am: 16. Januar 2012 4 / 200
ONLINE-CATALOGUE

fig. 5
(exemplary assembly of fittings for a dropper cable 10 mm² copper alloy)

Stand: 10. September 2009
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Dropper clamps for contact wire/
Gedruckt am: 16. Januar 2012 5 / 200
ONLINE-CATALOGUE
B611/2 Dropper clamps for carrier cable

identification number standard / Ebs-No. fig. messenger wire 2) a h l screw / nut Mass appr.
mm mm mm kg / 100 pc.
D cross section standard / Ebs-No.
mm mm² material / dimensions
DIN 933 / DIN 934
DIN 43 147 T.2-B
5311192A02 2 7,5 35 7 47 A2-70 / A2-80 10,5
Ebs 07.42.31-3 b1
M10x35/M10
Ebs 20.20.21 / DIN 934
5311115 1) Ebs 07.42.12 Bl.2 1 9,0 50 30 5,5 49 A2-70 / A2-80
M10x30 / M10
DIN 43 147 T.2-B 11,0
5311182A02 2 10,5 70 50
Ebs 07.42.31-3 a1
5311133 DIN 43 147 T.2-B 2 12,5 95
40 53 DIN 933 / DIN 934
5311135 3) Ebs 06.93.06 Bl.2 4 12,5 95 7 A2-70 / A2-80 12,0
M10x35 / M10
5311201A02 14,0 120 54 10,5
DIN 43 147 T.2-C 2/3 30
B662009A02 15,8 150 58 10,7

1) For use with contact wire see B611/1.
2) copper or copper alloy according DIN 48 201 T1 or T2
3) In order to improve the electrical contact clips like shown on fig. 4 are used in dropper clamps from case to case (see also B611/3), clip is part of clamp in this case.

Material / finish:

Clamp body: high grade copper alloy
Screws and nuts: see table

Application / mounting information:

Dropper clamps for carrier cable as in picture 5 are used to connect the hanger cable with the carrier cable.
For mounting take notice of the user requirements.

The screws M10 of the clamps have to be tightened with a torque of 25 Nm.

Stand: 07. Juli 2009
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Dropper clamps for carrier cable/
Gedruckt am: 16. Januar 2012 6 / 200
ONLINE-CATALOGUE

fig. 5 exemplary assembly of fittings for a dropper cable 10 mm² copper alloy

Stand: 07. Juli 2009
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Dropper clamps for carrier cable/
Gedruckt am: 16. Januar 2012 7 / 200
ONLINE-CATALOGUE
B611/3 Clips for Dropper clamps on carrier cable

fig. 1

identification Ebs / standard no. fig. d D b e g h l weight appr.
number kg / 100 pieces
5391141 Ebs 07.42.30 Bl.2 "c2" M3 14 9 31 52 11 35 1,0
5391142 Ebs 07.42.30 Bl.2 "a2" 1 M4 14 9 31 52 11 35 1,1
5391143 Ebs 07.42.30 Bl.2 "b2" M4,5 20 13 41 72 15 45 1,8

Material / finish: high grade copper alloy

Application / mounting information:

In order to improve the electrical contact clips are used in dropper clamps from case to case.
(see example page B611/2 picture 4 and 5)
For mounting the instructions of the user has to be followed.
Stand: 14. Juni 2007
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Clips for Dropper clamps on carrier cable/
Gedruckt am: 16. Januar 2012 8 / 200
ONLINE-CATALOGUE
B611/4 Dropper arrangements

fig. 1 fig. 2 fig. 3

Dropper arrangements in accordance with pictures 1-3 or similar — on request
Stand: 16. Mai 2006
Pfad: Fittings for railway catenary systems/Fittings for catenary systems/Dropper arrangements/
Gedruckt am: 16. Januar 2012 9 / 200