Product guide, Generator protection REG650 1.2, ANSI

96 Pages·2012·2.35 MB·English

Relion® 650 series
Generator protection REG650 ANSI
Product Guide
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2

Contents
1. 650 series overview...........................................................3 13. Metering.........................................................................26
2. Application.........................................................................3 14. Human Machine interface...............................................27
3. Available functions.............................................................6 15. Basic IED functions.........................................................27
4. Differential protection.......................................................14 16. Station communication...................................................28
5. Impedance protection......................................................15 17. Hardware description......................................................29
6. Current protection............................................................16 18. Connection diagrams Customized..................................31
7. Voltage protection............................................................19 19. Connection diagrams Configured....................................36
8. Frequency protection.......................................................21 20. Technical data................................................................49
9. Secondary system supervision.........................................21 21. Ordering for Customized IED..........................................84
10. Control...........................................................................22 22. Ordering for Configured IED............................................89
11. Logic..............................................................................23 23. Ordering for Accessories................................................92
12. Monitoring......................................................................24
Disclaimer
The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors
that may appear in this document.
© Copyright 2012 ABB.
All rights reserved.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or product names mentioned in this document may be trademarks or registered trademarks
of their respective holders.
2 ABB
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2 Issued: June 2012
Revision: B
1. 650 series overview REG670 may be used when more extensive
The 650 series IEDs provide both customized and protection systems are required or in combination
configured solutions. With the customized IEDs you with REG650 to provide redundant schemes.
have the freedom to completely adapt the
A wide range of protection functions is available to
functionality according to your needs.
achieve full and reliable protection for different types
The 650 series IEDs provide optimum 'off-the- of generating plants, for example hydro power
shelf', ready-to-use solutions. It is configured with plants and thermal power plants. This enables
complete protection functionality and default adaptation to the protection requirements of most
parameters to meet the needs of a wide range of generating plants.
applications for generation, transmission and sub-
Protection functions are available for detecting and
transmission grids.
clearing internal faults, such as generator stator
The 650 series IEDs include: short circuits and ground faults, generator rotor
• Customized versions providing the possibility to ground faults, unit transformer short circuits and
adapt the functionality to the application needs. ground faults and faults in the external power
• Configured solutions are completely ready to use system, fed from the generating plant.
solutions optimized for a wide range of
Two packages have been defined for the following
applications for generation, transmission and sub-
applications:
transmission grids.
• Support for user-defined names in the local
• Generator protection IED including generator
language for signal and function engineering.
differential protection (B01A)
• Minimized parameter settings based on default
• Generator-transformer unit protection IED
values and ABB's new global base value concept.
including transformer differential protection
You only need to set those parameters specific to
(B05A)
your own application, such as the line data.
• GOOSE messaging for horizontal communication. In many generating plants, the protection system
• Extended HMI functionality with 15 dynamic three- can be designed with a combination of the two
color-indication LEDs per page, on up to three packages, that is, two IEDs of either same type or
pages, and configurable push-button shortcuts different types, will give redundant protection for a
for different actions. generating unit (generator and unit transformer)
• Programmable LED text-based labels. depending on the requirements for the plant design.
• Settable 1A/5A -rated current inputs.
The packages are configured and ready for use.
Analogue inputs and binary input/output circuits are
pre-defined.
2. Application
REG650 is used for the protection and monitoring
The pre-configured IED can be changed and
of generating plants. The IED is especially suitable
adapted with the graphical configuration tool.
for applications in distributed control systems with
high demands on reliability. It is intended mainly for
small and medium size generation stations.
ABB 3
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2

110kV HV Substation
HV CB
A
200/1
200/1
Y
Unit
Transformer
29MVA J
121/11kV
YNd5 TRM module with 4I+1I*+5U
110/./110.11 kV AIM module with 6I+4U
33 3
Y
Auxiliary Y 59N 3Uo> Meter.
Transformer C MSQI
ROV2 PTOV
2500/5 100/5
1)
51 3I> 49 Ith Meter. 25 SC
C 1.6MVA B A, B, C or D OC4 PTOC TR PTTR CV MMXN SESRSYN
11/0.4kV
Generator CB 32Q Q 81R df/dt
GOP PDOP SA PFRC
Excitation 110.110.11 47 U2>
Transformer // kV
33 3 V MSQI
50/5 Y 59N 3Uo> 32 P 81O f>
ROV2 PTOV GOP PDOP SA PTOF
390kVA D Y
11/0.37kV 52PD PD 51 3I> 37 P< 81U f<
Dyn11 1600/5 CC RPLD OC4 PTOC GOP PDUP SA PTUF
50BF 3I> BF 50AE U</I> 27 3U<
CB 3) Rotor EF protection 64R CC RBRF AEG GAPC UV2 PTUV
Fed il ~ RXETT4 VI 6S7DNEPISND>E 6E7FN4 PTINO>C 87G 3Id/I L4E0X PDIS< O5V92 PT3OUV>
29MVA GEN PDIF 78 Ucos 24 U/f>
11kV OOSPPAM OEX PVPH
150rpm
1600/5 46 I2> 49 Ith 21 Z< 51V I>/U< 60FL
NS2 PTOC TR PTTR ZGCPDIS VR2 PVOC SDD RFUF
200/5
11
/0.11kV
3
G 59THDU3d/N
1000 STEF PHIZ
¤)
10/1 51N IN> 87N IdN 59N UN>
H J, G or H
EF4 PTOC HZPDIF
REG650-B01
2)
¤) Requires dedicated CT cores, external resistor and metrosil for correct operation
Note:
1) Input for independent non-directional OC and overload functions. It can be used for different purposes (e.g. OC protection for either
Auxiliary trafo or Excitation trafo or Step-up transformer HV side)
2) Input for independent non-directional EF function. It can be used for different purposes (e.g. as stator EF protection or turn-to-turn protection for
generators with split winding or even HV side EF protection). Alternatively it can be used for High-Impedance REF protection.
3) Input for independent directional (sensitive) EF function. It can be used for different purposes
(e.g. as rotor EF with RXTTE4 or stator EF for generators operating in parallel)
4) An example to indicate the functions, marked in black are enabled in settings.
ANSI11000140-2-en.vsd
ANSI11000140 V2 EN
Figure 1. Generator protection IED including generator differential protection (B01A)
4 ABB
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2

110kV HV Substation
HV CB TRM module with 4I+1I*+5U
AIM module with 6I+4U
52PD PD 51 3I> 50BF3I> BF Meter.
200/1 CC RPLD OC4 PTOC CC RBRF CV MMXN
Y
1100.110.11
// kV
33 3 Y
Y 200/1
Unit
Transformer
12291M/1V1kAV J 25 SC
YNd5 SESRSYN
87T 3Id/I
Y T3D PDIF
Auxiliary Y 59N 3Uo> Meter.
2500/5Transformer 100/5 ROV2 PTOV C MSQI
3)
51 3I> 49 Ith Meter.
E 1.6MVA D D or E OC4 PTOC TR PTTR CV MMXN
11/0.4kV
GT01
GGeenneerraattoorr CCBB 32Q Q 81R df/dt
GOP PDOP SA PFRC
TEraxncsitfaotriomner 1133/0.131/0.311kV 47V MSUQ2I>
50/5 Y 59N 3Uo> 32 P 81O f>
Y ROV2 PTOV GOP PDOP SA PTOF
C
390kVA 37 P< 81U f<
11/0.37kV
Dyn11 1600/5 B GUP PDUP SA PTUF
50AE U</I> 27 3U<
CBFed il ~ RXETT4 1)UI R6So7DtNoEr P EISNFD> pErotec6E7tFiNo4n P 6TIN4OR>C A4L0EEGX GPDAPI<SC OU5VV922 PPTT3UOUVV>
29MVA 78 Ucos 24 U/f>
11kV
1600/5 150rpm OOS PPAM OEX PVPH
46 I2> 49 Ith 21 Z< 51V I>/U< 60FL
A A or B
NS2 PTOC TR PTTR ZGC PDIS VR2 PVOC SDD RFUF
200/5
11
/0.11kV
G 3 59THDU3d/N
1000
¤) STEF PHIZ
10/1 51N IN> 87N IdN 59N UN>
H J, G or H
EF4 PTOC HZ PDIF
2) REG650-B05
¤) Requires dedicated CT cores, external resistor and metrosil for correct operation
Note:
1)Inputs for independent directional (sensitive) EF function. It can be used for different purposes.
(e.g. as rotor EF with RXTTE4 or stator EF for generators running in parallel)
2)Input for independent non-directional EF function. It can be used for different purposes (e.g. as stator EF protection or turn-to-turn protection
for generators with split winding or even HV side EF protection). Alternatively it can be used for High-Impedance REF protection.
3)Alternatively step up transformer HV side open delta VT can be connected here

Function Enabled Function Disabled .
in Settings in Settings
ANSI IEC ANSI IEC
IEC61850 IEC61850
ANSI11000141-2-en.vsd
ANSI11000141 V2 EN
Figure 2. Generator-transformer unit protection IED including transformer differential protection (B05A)
ABB 5
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2

3. Available functions
Main protection functions
IEC 61850/ ANSI Function description Generator
Function block
name
50 B01A) B05A)o diff
REG6 G650 (n diff G650 (n+Traf
Ee Ee
RG RG
Differential protection
T3WPDIF 87T Transformer differential protection, three winding 0–1 1
HZPDIF 87 1Ph High impedance differential protection 1 1 1
GENPDIF 87G Generator differential protection 0–1 1
Impedance protection
ZGCPDIS 21G Underimpedance protection for generators and 0–1 1 1
transformers
LEXPDIS 40 Loss of excitation 0–1 1 1
OOSPPAM 78 Out-of-step protection 0–1 1 1
LEPDIS Load encroachment 0–1 1 1
6 ABB
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2

Back-up protection functions
IEC 61850/ ANSI Function description Generator
Function
block name
50 B01A) B05A)o diff
REG6 G650 (n diff G650 (n+Traf
Ee Ee
RG RG
Current protection
OC4PTOC 51 Four step phase overcurrent protection, 3–phase output 0–2 2 2
EF4PTOC 51N/67N Four step residual overcurrent protection, zero/negative 0–2 2 2
sequence direction
SDEPSDE 67N Sensitive directional residual overcurrent and power 0–1 1 1
protection
TRPTTR 49 Thermal overload protection, two time constants 0–2 2 2
CCRBRF 50BF Breaker failure protection, 3–phase activation and output 0–1 1 1
CCRPLD 52PD Pole discordance protection 0–1 1 1
GUPPDUP 37 Directional underpower protection 0–1 1 1
GOPPDOP 32 Directional overpower protection 0–2 2 2
AEGGAPC 50AE Accidental energizing protection for synchronous 0–1 1 1
generator
NS2PTOC 46I2 Negative-sequence time overcurrent protection for 0–1 1 1
machines
VR2PVOC 51V Voltage-restrained time overcurrent protection 0–1 1 1
Voltage protection
UV2PTUV 27 Two step undervoltage protection 0–1 1 1
OV2PTOV 59 Two step overvoltage protection 0–1 1 1
ROV2PTOV 59N Two step residual overvoltage protection 0–2 2 2
OEXPVPH 24 Overexcitation protection 0–1 1 1
STEFPHIZ 59THD 100% Stator earth fault protection, 3rd harmonic based 0–1 1 1
- 64R Rotor ground protection with RXTTE4 injection unit 0–1 0–1 0–1
Frequency protection
SAPTUF 81 Underfrequency function 0–4 4 4
SAPTOF 81 Overfrequency function 0–4 4 4
SAPFRC 81 Rate-of-change frequency protection 0–2 2 2
ABB 7
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2

Control and monitoring functions
IEC 61850/Function ANSI Function description Generator
block name
50 B01A) B05A)o diff
REG6 G650 (n diff G650 (n+Traf
Ee Ee
RG RG
Control
SESRSYN 25 Synchrocheck, energizing check, and synchronizing 0–1 1 1
QCBAY Bay control 1 1 1
LOCREM Handling of LR-switch positions 1 1 1
LOCREMCTRL LHMI control of Permitted Source To Operate 1 1 1
(PSTO)
CBC1 Circuit breaker for 1CB 0–1 1
CBC2 Circuit breaker for 2CB 0–1 1
SLGGIO Logic Rotating Switch for function selection and 15 15 15
LHMI presentation
VSGGIO Selector mini switch extension 20 20 20
DPGGIO IEC 61850 generic communication I/O functions 16 16 16
double point
SPC8GGIO Single point generic control 8 signals 5 5 5
AUTOBITS AutomationBits, command function for DNP3.0 3 3 3
I103CMD Function commands for IEC60870-5-103 1 1 1
I103IEDCMD IED commands for IEC60870-5-103 1 1 1
I103USRCMD Function commands user defined for 4 4 4
IEC60870-5-103
I103GENCMD Function commands generic for IEC60870-5-103 50 50 50
I103POSCMD IED commands with position and select for 50 50 50
IEC60870-5-103
Secondary system supervision
SDDRFUF Fuse failure supervision 0–1 1 1
TCSSCBR Breaker close/trip circuit monitoring 3 3 3
Logic
SMPPTRC 94 Tripping logic, common 3–phase output 1–6 6 6
TMAGGIO Trip matrix logic 12 12 12
OR Configurable logic blocks, OR gate 283 283 283
8 ABB
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2

IEC 61850/Function ANSI Function description Generator
block name
50 B01A) B05A)o diff
REG6 G650 (n diff G650 (n+Traf
Ee Ee
RG RG
INVERTER Configurable logic blocks, Inverter gate 140 140 140
PULSETIMER Configurable logic blocks, Pulse timer 40 40 40
GATE Configurable logic blocks, Controllable gate 40 40 40
XOR Configurable logic blocks, exclusive OR gate 40 40 40
LOOPDELAY Configurable logic blocks, loop delay 40 40 40
TIMERSET Configurable logic blocks, timer function block 40 40 40
AND Configurable logic blocks, AND gate 280 280 280
SRMEMORY Configurable logic blocks, set-reset memory flip- 40 40 40
flop gate
RSMEMORY Configurable logic blocks, reset-set memory flip- 40 40 40
flop gate
FXDSIGN Fixed signal function block 1 1 1
B16I Boolean 16 to Integer conversion 16 16 16
B16IFCVI Boolean 16 to Integer conversion with logic node 16 16 16
representation
IB16A Integer to Boolean 16 conversion 16 16 16
IB16FCVB Integer to Boolean 16 conversion with logic node 16 16 16
representation
Monitoring
CVMMXN Measurements 6 6 6
CMMXU Phase current measurement 10 10 10
VMMXU Phase-phase voltage measurement 6 6 6
CMSQI Current sequence component measurement 6 6 6
VMSQI Voltage sequence measurement 6 6 6
VNMMXU Phase-neutral voltage measurement 6 6 6
AISVBAS Function block for service values presentation of 1 1 1
the analog inputs
TM_P_P2 Function block for service values presentation of 1 1 1
primary analog inputs 600TRM
AM_P_P4 Function block for service values presentation of 1 1 1
primary analog inputs 600AIM
ABB 9
Generator protection REG650 ANSI 1MRK 502 045-BUS B

Product version: 1.2

IEC 61850/Function ANSI Function description Generator
block name
50 B01A) B05A)o diff
REG6 G650 (n diff G650 (n+Traf
Ee Ee
RG RG
TM_S_P2 Function block for service values presentation of 1 1 1
secondary analog inputs 600TRM
AM_S_P4 Function block for service values presentation of 1 1 1
secondary analog inputs 600AIM
CNTGGIO Event counter 5 5 5
DRPRDRE Disturbance report 1 1 1
AxRADR Analog input signals 4 4 4
BxRBDR Binary input signals 6 6 6
SPGGIO IEC 61850 generic communication I/O functions 64 64 64
SP16GGIO IEC 61850 generic communication I/O functions 16 16 16 16
inputs
MVGGIO IEC 61850 generic communication I/O functions 16 16 16
MVEXP Measured value expander block 66 66 66
SPVNZBAT Station battery supervision 0–1 1 1
SSIMG 63 Insulation gas monitoring function 0–2 2 2
SSIML 71 Insulation liquid monitoring function 0–2 2 2
SSCBR Circuit breaker condition monitoring 0–1 1 1
I103MEAS Measurands for IEC60870-5-103 1 1 1
I103MEASUSR Measurands user defined signals for 3 3 3
IEC60870-5-103
I103AR Function status auto-recloser for IEC60870-5-103 1 1 1
I103EF Function status ground-fault for IEC60870-5-103 1 1 1
I103FLTPROT Function status fault protection for IEC60870-5-103 1 1 1
I103IED IED status for IEC60870-5-103 1 1 1
I103SUPERV Supervison status for IEC60870-5-103 1 1 1
I103USRDEF Status for user defined signals for IEC60870-5-103 20 20 20
Metering
PCGGIO Pulse counter logic 16 16 16
ETPMMTR Function for energy calculation and demand 3 3 3
handling
10 ABB