Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2001: Vol 215 Index PDF
Preview Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2001: Vol 215 Index
Author Index Abdul Ghani, A. G. A computational fluid dynamics study on the effect of sterilization temperatures on bacteria deactivation and vitamin destruction Agarwal, V. C. Empirical relation for the effect of the shape of the capsules and the nose shape on the velocity ratio of heavy density capsules in a hydraulic pipeline Andrews, J. D. Reliability of sequential systems using the cause—consequence diagram method 207-220 Andrews, J. Maintenance modelling for computer-based systems 221-231 Attenborough, K. Predicted influences of changes in particle size distribution in pulverized coal on 133-146 attenuation of sound Axon, C. J. It’s not what you do, it’s why you do it that makes the difference between engineering 93-97 and science: the strategy and structure of process engineering in the United States Bannister, R. H. Condition monitoring of slow-speed rolling element bearings using stress waves 245-271 Beckett, S. T. Milling, mixing and tempering—an engineering view of chocolate 1-8 Bergen, A. Fundamental aspects of centrifugal membrane separation 355-365 Bowen, R. J. Experimental and analytical study of thermal stresses during pipe freezing 63-77 Bridge, S. P. A pneumatic gauging sensor for measuring the thickness of soft films 19-27 Brown, C. J. Aspects of the elastic stability of walls in rectangular planform steel silos 165-176 Budair, M. O. Statistical aspects of fouling processes 331-354 Chen, X. D. A computational fluid dynamics study on the effect of sterilization temperatures on 9-17 bacteria deactivation and vitamin destruction Cirne, J. M. O. S. Stresses from radial loads and external moments in spherical pressure vessels 99-109 da Costa Pereira Leal, Stresses from radial loads and external moments in spherical pressure vessels 99-109 R. A. da Silva Gomes, J. F. Stresses from radial loads and external moments in spherical pressure vessels 99-109 Davim, J. P. Cutting force, tool wear and surface finish in drilling metal matrix composites 177-183 Djilali, N. Fundamental aspects of centrifugal membrane separation 355-365 Dugan, J. B. Maintenance modelling for computer-based systems 221-231 Duncan, C. Stability of open-channel trickling-filter distributor arms 39-51 Edwards, I. J. The impact of variable hazard rates on in-service reliability 233-242 Farid, M. M. A computational fluid dynamics study on the effect of sterilization temperatures on 9-17 bacteria deactivation and vitamin destruction Feng, C. Thermodynamic performance simulation of a twin-screw multiphase pump 157-163 Fichera, A. Comparison of the dynamical behaviour of rectangular natural circulation loops 273-28 | Foster, A. M. Using advanced modelling techniques to reduce the cold spillage from retail display 29-38 cabinets into supermarket stores to maintain customer comfort Froghieri, M. Comparison of the dynamical behaviour of rectangular natural circulation loops 273-281 Gogate, S. A. Self-discharging flat-bottom centrifugal basket design 111-122 Hamdan, M. M. Finite element and experimental analysis for the effect of elliptical chord shape on 123-131 tubular T-joint strength Hamed, A. F. Finite element and experimental analysis for the effect of elliptical chord shape on 123-131 tubular T-joint strength Higham, E. H. Fault detection and flow regime identification based on analysis of signal noise from 283-294 electromagnetic flowmeters Howell, J. A. It’s not what you do, it’s why you do it that makes the difference between engineering 93-97 and science: the strategy and structure of process engineering in the United States Jamaludin, N. Condition monitoring of slow-speed rolling element bearings using stress waves 245-271 Jones, I. A. . Stability of open-channel trickling-filter distributor arms 39-51 Keary, A. C. Experimental and analytical study of thermal stresses during pipe freezing 63-77 Khalid, Y. A. Finite element and experimental analysis for the effect of elliptical chord shape on 123-131 tubular T-joint strength Kim, C.-H. An integrated use of IDEFO, IDEF3 and Petri net methods in support of business process — 317-329 modelling Kubie, J. Transient processes in a closed vessel due to injection of hot liquid sprays 79-9] Lewis, J. S. Transient processes in a closed vessel due to injection of hot liquid sprays 79-91 Mathur, R. Empirical relation for the effect of the shape of the capsules and the nose shape on the 147-155 velocity ratio of heavy density capsules in a hydraulic pipeline © IMechE 2001 Proc Instn Mech Engrs Vol 215 Part E AUTHOR INDEX Mba, D. Condition monitoring of slow-speed rolling element bearings using stress waves 245-271 Meshkat, L. Maintenance modelling for computer-based systems 221-231 177-183 Monteiro Baptista, A. Cutting force, tool wear and surface finish in drilling metal matrix composites 53-62 Morris, W. D. A production planning and design model for assessing the thermal behaviour of thick steel strip during continuous heat treatment Nilsson, C. A multiobjective approach to design for reliability 197-205 Pagano, A. Comparison of the dynamical behaviour of rectangular natural circulation loops 273-281 Paterson, W. R. A pneumatic gauging sensor for measuring the thickness of soft films 19-27 Pengcheng, S. Thermodynamic performance simulation of a twin-screw multiphase pump 157-163 Perovic, S. Fault detection and flow regime identification based on analysis of signal noise from 283-294 electromagnetic flowmeters Quarini, G. Using advanced modelling techniques to reduce the cold spillage from retail display 29-38 cabinets into supermarket stores to maintain customer comfort Richards, P. A computational fluid dynamics study on the effect of sterilization temperatures on 9-17 bacteria deactivation and vitamin destruction Ridley, L. M. Reliability of sequential systems using the cause—consequence diagram method 207-220 Rilo, N. R. Stresses from radial loads and external moments in spherical pressure vessels 99-109 Robbins, P. T. A pneumatic gauging sensor for measuring the thickness of soft films 19-27 Sahari, B. B. Finite element and experimental analysis for the effect of elliptical chord shape on 123-131 tubular T-joint strength Sheikh, A. K. Statistical aspects of fouling processes 331-354 Singh, M. K. Empirical relation for the effect of the shape of the capsules and the nose shape on the 147-155 velocity ratio of heavy density capsules in a hydraulic pipeline Syngellakis, S. Experimental and analytical study of thermal stresses during pipe freezing 63-77 Thompson, G. The reduction in plant maintenance costs using creative problem-solving principles 185-195 Thompson, G. A multiobjective approach to design for reliability 197-205 Unsworth, P. J. Fault detection and flow regime identification based on analysis of signal noise from 283-294 electromagnetic flowmeters Valha, J. Transient processes in a closed vessel due to injection of hot liquid sprays Vickers, G. W. Fundamental aspects of centrifugal membrane separation Wang, Q. Predicted influences of changes in particle size distribution in pulverized coal on attenuation of sound Weston, R. H. An integrated use of IDEFO, IDEF3 and Petri net methods in support of business process modelling Wild, P. M. Fundamental aspects of centrifugal membrane separation Wilson, D. I. A pneumatic gauging sensor for measuring the thickness of soft films Woodhead, S. Predicted influences of changes in particle size distribution in pulverized coal on attenuation of sound Yim, D.-S. An integrated use of IDEFO, IDEF3 and Petri net methods in support of business process 317-329 modelling Younas, M. Statistical aspects of fouling processes 331-354 Yueyuan, P. Thermodynamic performance simulation of a twin-screw multiphase pump 157-163 Zaher, M. A. Approximate method for calculating the characteristics of a radial flow pump 295-316 Ziwen, X. Thermodynamic performance simulation of a twin-screw multiphase pump 157-163 Zubair, S. M. Statistical aspects of fouling processes 331-354 Proc Instn Mech Engrs Vol 215 Part E © IMechE 2001
The list of books you might like
