Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 1999: Vol 213 Index

3 Pages·1999·0.88 MB·English

Author Index
Alcock, R. J. Synergistic classification systems for wood defect identification
Alcock, R. J. Automated visual inspection of wood boards: selection of features for defect
classification by a neural network
Andrews, J. D. Techniques for modelling the frequency of explosions on offshore platforms
Andrews, J. D. Genetic algorithms in optimal safety system design
Attenborough, K. Measured dependence of the attenuation of audio-frequency sound on concentration in
flowing particulate suspensions
Avery, P. A computational and experimental study of flows in a distribution chamber: validation
of a numerical model
Bannister, R. H. Condition monitoring of low-speed rotating machinery using stress waves. Part |
Bannister, R. H. Condition monitoring of low-speed rotating machinery using stress waves. Part 2
Beck, S. B. M. A non-dimensional method to increase the accuracy of turbine flowmeters
Bissessur, Y. Machine condition monitoring for consistent paper production
Bridle, I. The analysis of particle degradation in pneumatic conveyors utilizing a pilot-sized test
facility
Caputo, A. C. Polyfunctional plants for industrial waste disposal: a case study for small enterprises
Caputo, A. C. Polyfunctional plants for industrial waste disposal: capacity analysis
Carey, V. P. Use of extended exergy analysis to evaluate the environmental performance of
machining processes
Creyts,. J.C. Use of extended exergy analysis to evaluate the environmental performance of 264
machining processes ‘
Cuthbert, M. R. A non-dimensional method to increase the accuracy of turbine flowmeters 126
Ebrahimi, M. Process control with minimum control effort 5—289
Findlay, G. E. Condition monitoring of low-speed rotating machinery using stress waves. Part | 53-170
Findlay, G. E. Condition monitoring of low-speed rotating machinery using stress waves. Part 2 185
Foster, K. J. Techniques for modelling the frequency of explosions on offshore platforms 119
Gallagher, G. J. Effects of local flow on the heat transfer characteristics of a cowled, finned system 99-110
Galletly, G. D. Buckling of imperfect elastic elliptic toroidal shells subjected to uniform external 199-214
pressure
Griffiths, A. J. Effects of local flow on the heat transfer characteristics of a cowled, finned system 99-110
Grosvenor, R. I. Sensor-based performance monitoring of a control valve unit 71-84
Hollaway, L. An approach to design for reliability 61-67
Jafargholi, K. Numerical simulation of laminar natural convection in horizontal annuli with radial fins 93-97
Lin, S. Effects of local flow on the heat transfer characteristics of a cowled, finned system 99-110
Liu, J. S. An approach to design for reliability 61-67
Ean, 8. Y. Recovery of waste rubber through pulverization at a low temperature of refrigeration by 135-138
an air turbine
Lordan, M. A review of creativity principles applied to engineering design
Lucia, U. The capacitive method as an industrial experimental technique of analysis of the
cavitation and two-phase flows
Mansouri, S. H. Numerical simulation of laminar natural convection in horizontal annuli with radial fins
Martin, E. B. Machine condition monitoring for consistent paper production 141-151
Mba, D. Condition monitoring of low-speed rotating machinery using stress waves. Part | 153-170
Mba, D. Condition monitoring of low-speed rotating machinery using stress waves. Part 2 171-185
Mehrabian, M. A. Numerical simulation of laminar natural convection in horizontal annuli with radial fins 93-97
Morris, A. J. Machine condition monitoring for consistent paper production 141-151
Moss, S. H. O. Measured dependence of the attenuation of audio-frequency sound on concentration in 45-56
flowing particulate suspensions
Nau, B. S. Design for optimum gasket assembly stress and leak rate control in bolted gasketed 33-44
joints
O'Doherty, T. Effects of local flow on the heat transfer characteristics of a cowled, finned system 99-110
Pattison, R. L. Genetic algorithms in optimal safety system design 187-197
Pelagagge, P. M. Polyfunctional plants for industrial waste disposal: a case study for small enterprises 1-9
© IMechE 1999 Proc Instn Mech Engrs Vol 213 Part E
294 AUTHOR INDEX
Pelagagge, P. M. Polyfunctional plants for industrial waste disposal: capacity analysis 11-16
Pham, D. T. Synergistic classification systems for wood defect identification 127-133
Pham, D. T. Automated visual inspection of wood boards: selection of features for defect 231-245
classification by a neural network
Rahnama, M. Numerical simulation of laminar natural convection in horizontal annuli with radial fins 93-97
Reed, A. R. The analysis of particle degradation in pneumatic conveyors utilizing a pilot-sized test 85-9]
facility
Sharif, M. A. Sensor-based performance monitoring of a control valve unit 71-84
Sinaie, A. Numerical simulation of laminar natural convection in horizontal annuli with radial fins 93-97
Thompson, C. P. A computational and experimental study of flows in a distribution chamber: validation 217-230
of a numerical model
Thompson, G. A review of creativity principles applied to engineering design 17-31
Thompson, G. An approach to design for reliability 61-67
Wang, P. Recovery of waste rubber through pulverization at a low temperature of refrigeration by 135-138
an air turbine
Whalley, R. Process control with minimum control effort 275-289
Wilkinson, D. Optimizing the design of waveplates for gas—liquid separation 265-274
Wong, V. H. A computational and experimental study of flows in a distribution chamber: validation 217-230
of a numerical model
Woodhead, S. R. Measured dependence of the attenuation of audio-frequency sound on concentration in
flowing particulate suspensions
Woodhead, S. R. The analysis of particle degradation in pneumatic conveyors utilizing a pilot-sized test
facility
Proc Instn Mech Engrs Vol 213 Part E © IMechE 1999