Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReXetGG 2016): sponsored by the Advanced Characterization, Testing, and Simulation Committee of the Structural Materials Division of The Minerals, Metals et Materials S

314 Pages·2016·40.461 MB·English

by  Holm, Elizabeth

Proceedings of the
6th International Conference on
Recrystallization and Grain Growth
(ReX&GG 2016)
Proceedings of the
6th International Conference on
Recrystallization and Grain Growth
(ReX&GG 2016)
Sponsored by
the Advanced Characterization, Testing, and Simulation Committee
of the Structural Materials Division of
The Minerals, Metals & Materials Society (TMS)
Held
July 17-21, 2016
Omni William Penn Hotel
Pittsburgh, Pennsylvania, USA
Edited by
Elizabeth A. Holm • Susan Farjami
Priyadarshan Manohar* Gregory S. Rohrer
Anthony D. Rollett • David Srolovitz
Hasso Wei land
Wl LEY TMS
Copyright © 2016 by The Minerals, Metals & Materials Society.
All rights reserved.
Published by John Wiley & Sons, Inc., Hoboken, New Jersey.
Published simultaneously in Canada.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as
permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior
written permission of The Minerals, Metals, & Materials Society, or authorization through payment of
the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers,
MA 01923, [phone], fax [phone], or on the web at www.copyright.com. Requests to
the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons,
Inc., Ill River Street, Hoboken, NJ 07030, [phone], fax [phone], or online at http://
www.wiley.com/go/permission.
Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts
in preparing this book, they make no representations or warranties with respect to the accuracy or
completeness of the contents of this book and specifically disclaim any implied warranties of mer-
chantability or fitness for a particular purpose. No warranty may be created or extended by sales rep-
resentatives or written sales materials. The advice and strategies contained herein may not be suitable
for your situation. You should consult with a professional where appropriate. Neither the publisher nor
author shall be liable for any loss of profit or any other commercial damages, including but not limited
to special, incidental, consequential, or other damages.
Wiley also publishes books in a variety of electronic formats. Some content that appears in print may
not be available in electronic formats. For more information about Wiley products, visit the web site
at www.wiley.com. For general information on other Wiley products and services or for technical sup-
port, please contact the Wiley Customer Care Department within the United States at [phone],
outside the United States at [phone] or fax [phone].
Library of Congress Cataloging-in-Publication Data is available.
ISBN 978-1-119-32835-3
Printed in the United States of America.
10 987654321
Wl LEY TMS
TABLE OF CONTENTS
Proceedings of the 6th International Conference
on Recrystallization and Grain Growth
(ReX&GG 2016)
Preface xi
About the Organizers xiii
Acknowledgments xvii
Grain Growth Theory and Simulation
Triple Junction Energy and Mobility Controlled Microstructural Evolution
in 2D and 3D Polycrystals 3
Dana Zollner and Peter Streitenberger
Grain Boundary, Triple Junction, and Quadruple Point Grain Growth
Dynamics 9
Paulo R. Rios and Martin E. Glicksman
Theoretical Basis of the Aboav-Weaire Equation and Topological
Consequences 15
Giuseppe Carlo Abbruzzese
Self-Similar Coarsening and the Envelope Theorem 23
Peter Streitenberger and Dana Zollner
Grain Growth in a System Containing Finely Dispersed Mobile
Second-Phase Particles: A GPU-Accelerated Multi-Phase-Field Study 29
Akinori Yamanaka andMasashi Okamoto
Recrystallization Theory and Simulation
Simulation and Data-Analytics of Sub-Grain Growth with Consideration
of Stored Elastic Energy and Anisotropic Grain Boundary Properties 37
Markus Kuhbach, Christian Miefien, Luis A. Barrales-Mora,
and Gunter Gottstein
On Recrystallization Twinning in Al-l%Wt.Mn Single Crystals of Two
Stable Orientations 43
Magdalena M. Miszczyk, Henryk Paul, Julian H. Driver,
and Piotr Drzymaia
v
Separate Construction of Recrystallization Diagrams for Grains of
Different Texture Components 51
Yuriy Perlovich, Margarita Isaenkova, Olga Krymskaya,
Vladimir Fesenko, and Elena Dergunova
Modeling the Dynamic Recrystallization: A Modified Cellular Automaton
Method 57
Fei Chen and Zhenshan Cui
Low Carbon and IF Steels
Texture Evolutions in Annealing Process for Medium Manganese Steel
Sheets 65
K. Okuda, T. Ishikawa, T. Omori, and R. Kainuma
Grain Refinement and Texture Evolution in Highly Deformed Ferrite
during High-Temperature Torsion Deformation of IF Steel 71
Reza Gholizadeh, Akinobu Shibata, and Nobuhiro Tsuji
Nucleation Stage during IF Steel Recrystallization and Internal
Misorientation Parameters 79
A. Ayad, M. Ramoul, N. Rouag, A.D. Rollett, and F. Wagner
Recrystallization Behavior of 5-Ferrite in the Ti-Alloyed Low Density
Steel 85
Xiangyu Xu, Xuemin Wang, Jianzhe Li, and Jian Zhang
Contrasting the Use of Contact and Non-Contact Dilatometers to
Measure Ferrite Recrystallization in Cold-Rolled Dual-Phase Steel 91
L.S. Thomas, K.D. Clarke, and D.K. Matlock
High Strength Steels
Annealing Studies of HSLA Steels Using EBSD 99
Yu Gong, Xiaojun Liang, J. Uusitalo, and A.J. DeArdo
A Model for the Influence of Micro-Alloying Elements on Static
Recrystallization of Austenite 113
Heinrich Buken, Sabine Zamberger, and Ernst Kozeschnik
On Control of Grain Coarsening of Austenite by Nano-Scale Precipitate
Engineering of TiN-NbC Composite in Ti-Nb Microalloyed Steel 119
S. V. Subramanian, Ma Xiaoping, KashifRehman, and Hatem Zurob
vi
Driving and Retarding Forces in Tempered Martensite Lath Structure 125
Alexandra Fedoseeva, Nadezhda Dudova, and Rustam Kaibyshev
On the Hot Deformation and Static Recrystallization Characteristics of
Al-Bearing Microalloyed TWIP Steels 131
Mahesh C. Somani, David A. Porter, and L. Pentti Karjalainen
Effects of Deformation Texture and Microstructure on Recrystallization
and Grain Growth in TWIP Steels 137
Rajib Kalsar, Pampa Ghosh, Saurabh Kundu, and Satyam Suwas
Deformation and Recrystallization Textures in a High-Mn Steel Subjected
to Large Strain Cold Rolling 147
Zhanna Yanushkevich, Andrey Belyakov, Rustam Kaibyshev,
Christian Haase, and Dmitri A. Molodov
Effect of Grain Size Distribution on Recrystallisation Kinetics in a
Fe-30Ni Model Alloy 153
Mo Ji, Vit Janik, Martin Strangwood, and Claire Davis
Modelling Microstructure and Mechanical Properties of High Strength
Steels during Hot Rolling in an ESP Plant 159
Andrea Di Schino, Claudio Braccesi, Filippo Cianetti,
andAli Smith
Through-Process Modeling for Hot Processing of Advanced High Strength
Steel Strips 165
Priya A. Manohar
Electrical Steels
The Effect of Cross-Rolling on the Growth of Goss Grains in a Grain
Oriented Silicon Steel 173
Fatayalkadri Citrawati, Md Zakaria Quadir, and Paul Munroe
Cube Texture Control by Retaining from Columnar Grains in a Fe-3%Si
Alloy 179
Ning Zhang, Ping Yang, and Weimin Mao
Effect of Cold Rolling Reduction on Recrystallization Texture and
Magnetic Anisotropy of Non-Oriented Electrical Steel 185
Hunju Lee and Jong-Tae Park
vii
Effect of Temper Rolling Reduction Prior to Hot Band Annealing on the
Goss Texture Formation in Grain-Oriented Electrical Steels 191
Kyung-Jun Ko, Jong-Tae Park, and Chan-Hee Han
Effect of Martensite on Deformation Structure and Recrystallization
Behavior in Ferritic Stainless Steel 197
Ken Kimura, Kohsaku Ushioda, Eiichiro Ishimaru,
and Akihiko Takahashi
Recrystallization of Cold Pilgered Heat Resistant Austenitic Stainless
Steel Seamless Tubes under Anisothermal Annealing Conditions 203
A. Iza-Mendia, I. Gutierrez, R. Rodriguez, and A. Lopez
Hot Deformation Behaviour and Recrystallization Mechanisms in a
Niobium Stabilized Austenitic Stainless Steel 209
Alexandre Hermant, Eric Suzon, Jacques Bellus, Philippe Petit,
Frangois Cortial, and Anne-Frangoise Gourgues
Aluminum and Magnesium Alloys
Precise Direction of Symmetrically Tilt Small Angle Boundaries
Developed during Recrystallization of Cross Rolled Aluminium 217
Mohammad Shamsuzzoha
Recrystallization Nucleation and Grain Growth in Al-l%wt.Mn Single
Crystals of Stable Orientations 223
Magdalena M. Miszczyk, Henryk Paul, and Julian H. Driver
Effect of Strain Path Change on Deformation and Recrystallization
Texture Evolution in Al-Mg Alloy 231
Latimuni Patra, Sumeet Mishra, and N.P. Gurao
Mechanism of Grain Refinement during Equal-Channel Angular Pressing
at Intermediate Temperature in an Al-Mg-Sc Alloy 239
Sergey Malopheyev, Vladislav Kulitskiy, Marat Gazizov,
and Rustam Kaibyshev
Strength and Ductility of Ultrafine Grained ZKX600 Mg Alloy 245
Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata,
Taisuke Sasaki, Kazuhiro Hono, and Nobuhiro Tsuji
viii
Nickel and Nickel Based Superalloys
Thickness and Surface Effects on Abnormal Grain Growth in
Nanocrystalline Nickel Films 253
Khalid Hattar, Bryan Miller, Ian M. Robertson, and Josh Kacher
Heteroepitaxial Recrystallization, a New Recrystallization Mechanism in
Sub-Solvus Forged y-y' Nickel-Based Superalloys with Low Lattice
Mismatch 259
Marie-Agathe Charpagne, Thomas Billot, Jean-Michel Franchet,
and Nathalie Bozzolo
Grain Growth Modeling for Additive Manufacturing of Nickel Based
Superalloys 265
H.L. Wei, T. Mukherjee, and T. DebRoy
Inconel 718 Micro structural Evolution Modeling during Sequential
Forming Steps (Hot Forging Followed by Ring Rolling) 271
O. Beltran
Unconventional and Advanced Materials
Point-Group Sensitive Orientation Mapping Using EBSD 281
Aimo Winkelmann, Gert Nolze, Marcel Himmerlich, Vadim Lebedev,
and Angelika Reichmann
Influence of Annealing Temperature on the Morphology and
Crystallography of Cr, CrN and CrAIN Films 287
F.Z. Mammeri, B. Riah, A. Ayad, L. Chekour, M.A. Djouadi,
and N. Rouag
Changes of Basal Normal Orientation during Recrystallization of Sheets
and Tubes from Zr-Based Alloys 293
Margarita Isaenkova, Yuriy Perlovich, Vladimir Fesenko,
and Olga Krymskaya
Textured Growth of A1N Films Deposited on Si(100) by DC Reactive
Magnetron Sputtering and by High Power Impulse Magnetron Sputtering
(HiPIMS) 299
B. Riah, A. Ayad, J. Camus, M.A. Djouadi, and N. Rouag
An Effective Method to Homogenize the Microstructure of High Purity
Tantalum in Sputtering Targets 303
Yahui Liu, Shifeng Liu, Lijuan Li, Chao Deng, and Qing Liu
ix
Author Index
Subject Index
PREFACE
This collection of manuscripts represents a cross-section of the papers presented at
the 6th International Conference on Recrystallization and Grain Growth, which
was held in Pittsburgh, Pennsylvania, USA, on July 17-21, 2016.
As the two fundamental processes of annealing, grain growth and recrystallization
have been studied, modeled, and debated for the better part of a century. In 2001,
two long-standing conferences, the International Conference on Grain Growth in
Poly crystalline Materials and the International Recrystallization Conference, merged
in the First International Conference on Grain Growth and Recrystallization held in
Aachen, Germany. Subsequent ReX&GG installments took place in 2004 (Annecy,
France), 2007 (Jeju, Korea), 2010 (Sheffield, UK), and 2013 (Sydney, Australia). At
this sixth conference in the series, over 300 scientists gathered from 30 countries to
present and discuss the latest research in these fundamental material processes. It
seems safe to predict that grain growth and recrystallization will continue to engage
scientists for at least another century.
Topics addressed by sessions at this conference included: Grain growth theory
and simulation; Abnormal grain growth; Grain growth in nanocrystalline
materials; Recrystallization modeling and simulation; Dynamic recrystallization;
Grain boundary structure and properties; Twinning; Advanced characterization;
Deformation, substructure, and texture; Iron and low carbon steels; Electrical steels;
Stainless steels; HSLA and microalloyed steels; TRIP and TWIP steels; Specialty
steels; Aluminum alloys; Superalloys; Titanium alloys; Magnesium alloys; and
Unconventional materials including ceramics, ice, and refractories. In addition,
plenary sessions highlighted new perspectives on recrystallization and grain growth,
and participants were privileged to attend a lecture by Dr. Dorte Juul Jensen, as
she was awarded the Cyril Stanley Smith Award. An evening poster session, social
events, and a conference banquet rounded out the activities.
The 45 papers presented in these proceedings are divided into nine sections:
• Grain growth theory and simulation
• Recrystallization theory and simulation
• Low carbon and IF steels
• High strength steels
• Electrical steels
• Stainless steels
• Aluminum and magnesium alloys
• Nickel and nickel based superalloys
• Unconventional and advanced materials
xi