Proceedings of the 4th International Conference on Industrial Engineering: ICIE 2018

2368 Pages·2019·64.82 MB·English

by  Andrey A. Radionov, Oleg A. Kravchenko, Victor I. Guzeev, Yurij V. Rozhdestvenskiy

Lecture Notes in Mechanical Engineering
Andrey A. Radionov
Oleg A. Kravchenko · Victor I. Guzeev
Yurij V. Rozhdestvenskiy Editors
Proceedings of the
4th International
Conference
on Industrial
Engineering
ICIE 2018
Lecture Notes in Mechanical Engineering
Lecture Notes in Mechanical Engineering (LNME) publishes the latest
developments in Mechanical Engineering—quickly, informally and with high
quality. Original research reported in proceedings and post-proceedings represents
the core of LNME. Volumes published in LNME embrace all aspects, subfields and
new challenges of mechanical engineering. Topics in the series include:
• Engineering Design
• Machinery and Machine Elements
• Mechanical Structures and Stress Analysis
• Automotive Engineering
• Engine Technology
• Aerospace Technology and Astronautics
• Nanotechnology and Microengineering
• Control, Robotics, Mechatronics
• MEMS
• Theoretical and Applied Mechanics
• Dynamical Systems, Control
• Fluid Mechanics
• Engineering Thermodynamics, Heat and Mass Transfer
• Manufacturing
• Precision Engineering, Instrumentation, Measurement
• Materials Engineering
• Tribology and Surface Technology
To submit a proposal or request further information, please contact: Dr. Leontina Di
Cecco
Andrey A. Radionov • Oleg A. Kravchenko
Victor I. Guzeev • Yurij V. Rozhdestvenskiy
Editors
Proceedings of the 4th
International Conference
on Industrial Engineering
ICIE 2018
123
Editors
Andrey A. Radionov Victor I. Guzeev
South Ural State University South Ural State University
Chelyabinsk, Russia Chelyabinsk, Russia
Oleg A. Kravchenko Yurij V. Rozhdestvenskiy
Platov South-Russian State Polytechnic South Ural State University
University Chelyabinsk, Russia
Novocherkassk, Russia
ISSN 2195-4356 ISSN 2195-4364 (electronic)
Lecture Notes in Mechanical Engineering
ISBN 978-3-319-95629-9 ISBN 978-3-319-95630-5 (eBook)
https://doi.org/10.1007/978-3-319-95630-5
Library of Congress Control Number: 2018948126
© Springer Nature Switzerland AG 2019
This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part
of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations,
recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission
or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar
methodology now known or hereafter developed.
The use of general descriptive names, registered names, trademarks, service marks, etc. in this
publication does not imply, even in the absence of a specific statement, that such names are exempt from
the relevant protective laws and regulations and therefore free for general use.
The publisher, the authors and the editors are safe to assume that the advice and information in this
book are believed to be true and accurate at the date of publication. Neither the publisher nor the
authors or the editors give a warranty, express or implied, with respect to the material contained herein or
for any errors or omissions that may have been made. The publisher remains neutral with regard to
jurisdictional claims in published maps and institutional affiliations.
This Springer imprint is published by the registered company Springer Nature Switzerland AG
The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Preface
International Conference on Industrial Engineering took place on May 15–18, 2018
in Moscow, Russian Federation. The conference was organized by three universi-
ties—Moscow Polytechnic University, South Ural State University (national
research university), and Platov South-Russian State Polytechnic University. It was
carried out under financial support of the South Ural State University (national
research university), Moscow Polytechnic University as well as at informational
support of the Institute of Electrical and Electronics Engineers (South Ural IEEE
Chapter).
The conference was really large-scaled and international. The program com-
mittee selected more than 900 reports. The delegates represented several Russian
universities and 15 states such as Egypt, Belarus, Bulgaria, Canada, Cyprus, China,
Germany, Iraq, Kazakhstan, Mongolia, Portugal, Spain, Tajikistan, United States,
and Ukraine.
The conference participants submitted papers reflecting recent advances in the
field of Industrial Engineering. The conference was organized in 14 sections,
including
• Part 1: Research and Development of Machines and Mechanisms (Dynamics of
Machines and Working Processes; Friction, Wear and Lubrication in Machines;
Design and Manufacturing Engineering of Industrial Facilities; Surface
Transport and Technological Machines; Equipment and Technology of Welding
Production).
• Part 2: Materials Engineering and Technologies for Production and Processing
(New Functional Materials and Technologies; Innovation and Cost-Effective
Use of Resources of Metallurgy Industry).
• Part 3: Control and Automation Systems for Manufacturing in the Industrial
Production Areas (Control Systems and Their Industrial Application; Industrial
Mechatronics, Automation, and Robotics; Electric Power Systems and
Renewable Energy Sources; Power Electronics, Electrical Machines, and Drives;
v
vi Preface
Signal Processing and Real-Time Embedded Control; Modeling and Computer
Technologies; Theory and Applications of Dynamical Measurements).
The present volume gathers 269 peer-reviewed papers from Part 1 of the conference
technical sections, “Research and Development of Machines and Mechanisms”, and
these papers were selected by the program committee for publication in Springer
book series “Lecture Notes in Mechanical Engineering”.
The organizing committee would like to express its sincere gratitude to every-
body who has contributed to the conference. Heartfelt thanks are due to authors,
reviewers, participants, and to all the team of organizers for their support and
enthusiasm which granted success to the conference.
Moscow, Russia Prof. Andrey A. Radionov
Conference Chair
Contents
Part I Dynamics of Machines and Working Processes
Diesel Engine Preheating and Starting Simulation
with Modelica Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A. Malozemov, V. Bondar and G. Malozemov
Processes Dynamic Characteristics in the Intake System
of Piston Internal Combustion Engine . . . . . . . . . . . . . . . . . . . . . . . . . 13
L. V. Plotnikov and Yu. M. Brodov
Calculated and Experimental Study of Free Vibrations
of a Cylindrical Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
D. A. Permyakov, A. S. Pantileev and S. V. Makhnovich
Optimization of Parameters for Fuel Combustion Process
of Diesel Working Cycle Improvement . . . . . . . . . . . . . . . . . . . . . . . . 35
E. A. Lazarev, V. E. Lazarev and M. A. Matsulevich
Mathematical Models of Low-Temperature Gas Generator . . . . . . . . . 47
V. V. Kirillov and R. D. Shelkhovskoi
Iterative Process of AFEM and Ideal Failure Models
of Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
A. Ermakova
Analysis of Resonator Installation Effect in Intake System
of the Diesel Engine on Parameters of Gas Exchange Quality . . . . . . . 69
L. V. Plotnikov, S. Bernasconi and B. P. Zhilkin
Calculated-Experimental Estimation of Residual Pipeline Resource
for Long-Term Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
M. V. Shakhmatov, E. A. Usmanova and L. I. Khmarova
vii
viii Contents
Dynamic Problem of Direct Piezoelectric Effect for the Circular
Multilayer Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
D. A. Shlyakhina and O. V. Ratmanova
Dynamic Diagnostics of Limiting State of Milling Process
Based on Poincaré Stroboscopic Mapping . . . . . . . . . . . . . . . . . . . . . . 99
A. A. Gubanova
Calculation-Analytical Estimation of the Working Cycle
Parameters of the Crankless and Crank Engines Under
Similar Loading Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
B. A. Sharoglazov, K. D. Podsedov and M. K. Kuanyshev
Experimental Estimation of Influence of Fuel Injector Nozzle
Design on Output Parameters of Tractor Diesel . . . . . . . . . . . . . . . . . 119
G. V. Lomakin, V. E. Lazarev and V. M. Myslyaev
Dislocation Model of Wheel–Rail Interaction with Locomotive
Lateral Fluctuations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
A. N. Savoskin and A. P. Vasilev
Study of Oscillating Process of Harp Screens . . . . . . . . . . . . . . . . . . . 133
A. D. Bardovsky, A. A. Gerasimova and I. I. Basyrov
To Issue of Application of Method of Dynamic Mechanical
Analysis (DMA) to Determine Viscoelastic Properties
and Heat Generation in Rubber Elements of Solid Tires . . . . . . . . . . . 141
E. E. Richter, A. V. Ignatova and A. V. Ponkin
Modeling of Dynamic and Economical Characteristics
of Life-Saving Device with Flywheel Energy Storage . . . . . . . . . . . . . . 151
N. N. Barbashov, I. V. Leonov and K. D. Sologub
Experimental Studies on Influence of Natural Frequencies
of Oscillations of Mechanical System on Angular Velocity
of Pendulum on Rotating Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
A. I. Artyunin, S. V. Eliseev and O. Y. Sumenkov
Analysis of Possibilities to Reduce Energy Consumption
of Elevator Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
L. Abdullina, N. Barbashov and I. Leonov
Results of Investigating Vibration Load at Human Operator’s
Seat in Utility Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
I. A. Teterina, P. A. Korchagin and A. B. Letopolsky
Deformation of Thin Elastic Rod Under Large Deflections . . . . . . . . . 185
V. S. Zhernakov, V. P. Pavlov and V. M. Kudoyarova
Contents ix
Selection of Incidence Angle at Designing Blade Row
of Compressors and Turbines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
K. E. Rozhkov, I. A. Krivosheev and N. B. Simonov
Synthesis of Controlling the Movement of Digging Mechanisms
of Excavators on the Basis of Inverse Dynamic Problems . . . . . . . . . . 205
N. K. Kuznetsov, I. A. Iov and A. A. Iov
Damping Ratio and Natural Frequency of Dynamic System
in Milling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
K. Yu. Kravchenko, S. S. Kugaevskii and M. P. Zhuravlev
Models of Fatigue Fracture Under Cyclic Loading Pistons
of Internal Combustion Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
A. N. Gots
Investigation of Units Condition of Rotor-Type Milling Machines
Based on Vibration Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
V. Yu. Ovsyannikov, A. I. Klychnikov and A. V. Sharov
Mathematical Modeling of Wear of Cutter on Back Edge by Taking
into Account Beating and Kinematic Perturbations . . . . . . . . . . . . . . . 241
V. L. Zakovorotny and V. E. Gvindjiliya
Determination of Critical Speed of Rail Vehicle as Mechanical
System with Nonlinear Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
A. N. Davydov and A. V. Smolyaninov
Influence of Contact Area of Additional Elements on Frequency
Spectrum Splitting in Cylindrical Shells . . . . . . . . . . . . . . . . . . . . . . . 261
S. V. Seregin
Selection of Rational Technological Modes and Parameters
of Underwater Waterjet Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
D. R. Mugla, A. L. Galinovskiy and N. V. Kobernik
Voxel and Finite Element Modeling of the Ceramic–Polymer
Composite Panel for Ballistic Impact Description . . . . . . . . . . . . . . . . 277
E. I. Shchurova
Common Problems and Prospects of Crankshaft (Eccentric)
Machinery Usage in Sawmilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
A. A. Kondratyuk, V. K. Shilko and A. A. Klopotov
Drill Bit Self-oscillation in Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
V. S. Bykador
Using Local Coordinate Systems for Dimensional Analysis
in the Machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
S. S. Kugaevskii and V. N. Ashikhmin