Powder Technology 1999: Vol 105 Index

10 Pages·1999·3.5 MB·English

POWDER
TECHNOLOGY
Powder Technology 105 (1999) 453
www.elsevier.com /locate /powtec
Author Index of Volume 105
Abecassis, J., 89 Fagerli, S., 436 Le Bolay, N., 321 Rubiera, F., 351
Aboussouan, L., 288 Filippov, L.O., 106 Leclerc, D., 288 Russo, Ph., 288
Adams, M.J., 74 Firpo, J.-L., 413 Lecogq, O., 21
Alnot, M., 141 Forssberg, E., 295 Leroy, J., 95 Saito, F., 162
Arenillas, A., 351 Frances, C., 362 Lutch, J.J., 199 Samskog, P.O., 443
Austin, L.G., 210 Frost, T., 436 Lysiak, G., 83 Sander, U., 282
Fuente, E., 351 Sandvik, K.L., 436
Bakshi, A.K., 418 Fuerstenau, D.W., 113, 199 Mabille, F., 89 Schafer, M., 243
Barres, O., 141 Malvik, T., 52 Schilz, J., 149
Baudet, G., 125 Gaffet, E., 155 Mamourian, A., 362 Schonert, K., 30, 179, 282, 311
Becker, M., 374 Galk, J., 186 Mayade, T.L., 237 Schreier, M., 39
Belaroui, K., 396 Geldart, D., 337 Meijer, M., 396 Schubert, G., 274
Bel Fadhel, H., 362 Ghadiri, M., 57, 66 Melcion, J.-P., 119 Schwedes, J., 374, 406
Benet, J.C., 89 Gillot, B., 155 Mermet, A., 89 Seron, A., 125
Benezet, J.C., 167 Gock, E., 302 Meyer, H.-J., 149 SeSelj, A., 205
Benhassaine, A., 167, 172 Goeuriot, P., 328 Mi, G., 162 Shindo, D., 162
Bergougnoux, L., 413 Goujon, C., 328 Miles, N., 351 Solecki, M., 389
Bernard, F., 155, 328 Groger, T., 39 Minoux, M.A., 172 Stellatelli, M., 125
Bernhardt, C., 357 Guibert, D., 119 Misguich-Ripault, J., 413 StraziSar, J., 205
Berthiaux, H., 228, 266 Guigon, P., 21 Misra, A., 222 Subero, J., 66
Bertrand, D., 119 Gutsche, O., 113 Molina-Boisseau, S., 321
Birat, J.P., 288 Monredon, T., 443
Tano, K., 443
Bock, U., 311 Haddad, Y., 89 Miiller, F., 2, 243
Tasirin, S.M., 337
Bortzmeyer, D., 57 Heim, A., 389 Murakami, Y., 162
Theuerkauf, J., 406
Bouquet, E., 141 Herbst, J.A., 424
Thomas, A., 106
Broussaud, A., 443 Hogg, R., 135 Negro, P., 95
Thomas, D., 288
Brunard, N., 57 Homma, T., 342 Nielsen, K., 52 Thornton, C., 66, 74
Houot, R., 106 Niepce, J.C., 328
Timmel, G., 274
Cases, J.M., 141 Hoyer, D.I., 250 Ning, Z., 57, 66
Timmermann, D., 179
Charmet, J.-C., 190 Husemann, K., 357 Nivoix, V., 155
Tomas, J., 39
Chedru, M., 328 Tsoungui, O., 190
Chermant, J.L., 328 Inoue, T., 342 Oberg, E., 443
Cheung, J., 222 Irannajad, M., 106 Okaya, K., 342
Vallet, D., 190
Cho, H., 210 Owada, S., 342
Varinot, C., 228
Ciomocos, M.T., 74 Joussemet, R., 106
Vasilkov, O., 257
Clerc, L., 172 Pate, W.T., 424
Verdier, P., 328
Couroyer, C., 57 Kawatra, S.K., 418 Perriat, P., 155
Vicens, J., 328
Kirchner, J., 274 Perrotel, V., 125
Vivier, H., 396
De, A., 199 Klimpel, R.R., 430 Peukert, W., 186
Voropayev, S., 257
De Donato, Ph., 141 Kolenda, F., 57 Pis, J.J., 351
Delebarre, A., 95 Kongolo, M., 141 Pixius, K., 149
Werner, V., 30
Dodds, J., 228, 266 Krahnen, J., 186 Polke, R., 243
Duc, G., 119 Kurrer, K.-E., 302 Polke, R.F., 2
Kwade, A., 14, 382 Pons, M.N., 21, 288, 396 Yildirim, K., 210
Ehlers, S., 39 Yvon, J., 141
Eisele, T.C., 418 Laskowski, J., 83 Reinsch, E., 357
Enderlé, F., 141 Laurent, Y., 328 Riffel, M., 149 Zelkowski, J., 30
Eskin, D., 257 Laval, P., 57 Roux, J.C., 237 Zhang, S., 295
Elsevier Science S.A.
PII: $0032-5910(99)00201-6

POWDER
TECHNOLOGY
te vie
ELSEVIER
Powder Technology 105 (1999) 453
www.elsevier.com /locate /powtec
Author Index of Volume 105
Abecassis, J., 89 Fagerli, S., 436 Le Bolay, N., 321 Rubiera, F., 351
Aboussouan, L., 288 Filippov, L.O., 106 Leclerc, D., 288 Russo, Ph., 288
Adams, M.J., 74 Firpo, J.-L., 413 Lecogq, O., 21
Alnot, M., 141 Forssberg, E., 295 Leroy, J., 95 Saito, F., 162
Arenillas, A., 351 Frances, C., 362 Lutch, J.J., 199 Samskog, P.O., 443
Austin, L.G., 210 Frost, T., 436 Lysiak, G., 83 Sander, U., 282
Fuente, E., 351 Sandvik, K.L., 436
Bakshi, A.K., 418 Fuerstenau, D.W., 113, 199 Mabille, F., 89 Schafer, M., 243
Barres, O., 141 Malvik, T., 52 Schilz, J., 149
Baudet, G., 125 Gaffet, E., 155 Mamourian, A., 362 Schonert, K., 30, 179, 282, 311
Becker, M., 374 Galk, J., 186 Mayade, T.L., 237 Schreier, M., 39
Belaroui, K., 396 Geldart, D., 337 Meijer, M., 396 Schubert, G., 274
Bel Fadhel, H., 362 Ghadiri, M., 57, 66 Melcion, J.-P., 119 Schwedes, J., 374, 406
Benet, J.C., 89 Gillot, B., 155 Mermet, A., 89 Seron, A., 125
Benezet, J.C., 167 Gock, E., 302 Meyer, H.-J., 149 SeSelj, A., 205
Benhassaine, A., 167, 172 Goeuriot, P., 328 Mi, G., 162 Shindo, D., 162
Bergougnoux, L., 413 Goujon, C., 328 Miles, N., 351 Solecki, M., 389
Bernard, F., 155, 328 Groger, T., 39 Minoux, M.A., 172 Stellatelli, M., 125
Bernhardt, C., 357 Guibert, D., 119 Misguich-Ripault, J., 413 StraziSar, J., 205
Berthiaux, H., 228, 266 Guigon, P., 21 Misra, A., 222 Subero, J., 66
Bertrand, D., 119 Gutsche, O., 113 Molina-Boisseau, S., 321
Birat, J.P., 288 Monredon, T., 443
Tano, K., 443
Bock, U., 311 Haddad, Y., 89 Miiller, F., 2, 243
Tasirin, S.M., 337
Bortzmeyer, D., 57 Heim, A., 389 Murakami, Y., 162
Theuerkauf, J., 406
Bouquet, E., 141 Herbst, J.A., 424
Thomas, A., 106
Broussaud, A., 443 Hogg, R., 135 Negro, P., 95
Thomas, D., 288
Brunard, N., 57 Homma, T., 342 Nielsen, K., 52
Thornton, C., 66, 74
Houot, R., 106 Niepce, J.C., 328
Timmel, G., 274
Cases, J.M., 141 Hoyer, D.I., 250 Ning, Z., 57, 66
Timmermann, D., 179
Charmet, J.-C., 190 Husemann, K., 357 Nivoix, V., 155
Tomas, J., 39
Chedru, M., 328
Tsoungui, O., 190
Chermant, J.L., 328 Inoue, T., 342 Oberg, E., 443
Cheung, J., 222 Irannajad, M., 106 Okaya, K., 342
Vallet, D., 190
Cho, H., 210 Owada, S., 342
Varinot, C., 228
Ciomocos, M.T., 74 Joussemet, R., 106
Vasilkov, O., 257
Clerc, L., 172 Pate, W.T., 424
Verdier, P., 328
Couroyer, C., 57 Kawatra, S.K., 418 Perriat, P., 155
Vicens, J., 328
Kirchner, J., 274 Perrotel, V., 125
Vivier, H., 396
De, A., 199 Klimpel, R.R., 430 Peukert, W., 186
Voropayev, S., 257
De Denato, Ph., 141 Kolenda, F., 57 Pis, J.J., 351
Delebarre, A., 95 Kongolo, M., 141 Pixius, K., 149
Werner, V., 30
Dodds, J., 228, 266 Krahnen, J., 186 Polke, R., 243
Duc, G., 119 Kurrer, K.-E., 302 Polke, R.F., 2
Kwade, A., 14, 382 Pons, M.N., 21, 288, 396 Yildirim, K., 210
Ehlers, S., 39 Yvon, J., 141
Eisele, T.C., 418 Laskowski, J., 83 Reinsch, E., 357
Enderlé, F., 141 Laurent, Y., 328 Riffel, M., 149 Zelkowski, J., 30
Eskin, D., 257 Laval, P., 57 Roux, J.C., 237 Zhang, S., 295
Elsevier Science S.A.
PII: $0032-5910(99)00201-6
POWDER
TECHNOLOGY
a.
EV Powder Technology 105 (1999) 454—459
www.elsevier.com /locate /powtec
Subject Index of Volume 105
Abrasion Blé
Attrition as a process of comminution and separation, 205 Rheological properties of wheat endosperm with a view on grinding
Additives behaviour, 89
The influence of suspension properties on ultra-fine grinding in stirred Boyle’s law
ball mills, 357 An on-line pressure vessel rheometer for slurries, 418
Agglomerates Breakage
Effect of interface energy on the impact strength of agglomerates, 66 Effect of interface energy on the impact strength of agglomerates, 66
Numerical simulations of agglomerate impact breakage, 74 Breakage behavior
Air classification Breakage mechanisms and mill performance in ultrafine grinding, 135
Industrial classification in a new impeller wheel classifier, 186 Breakage distributions
Air classifier Breakage mechanisms and mill performance in ultrafine grinding, 135
Industrial classification in a new impeller wheel classifier, 186 Breakage rates
Air-jet mill Breakage mechanisms and mill performance in ultrafine grinding, 135
A grindability test to study the influence of material processing on Bulk attrition
impact behaviour, 21 Breakage of macroporous alumina beads under compressive loading:
AIN-AI alloy composite simulation and experimental validation, 57
Cryomilling of Al/AIN powders, 328
Alumina beads
Breakage of macroporous alumina beads under compressive loading:
simulation and experimental validation, 57
Calcium titanate
Anatase
Mechanochemical synthesis of CaTiO, from a CaO-TiO, mixture
Mechanochemical synthesis of CaTiO, from a CaO-TiO, mixture
and its HR-TEM observation, 162
and its HR-TEM observation, 162
Cell disintegration
Associations of mills
Disintegration of microorganisms in a bead mill with a multi-disk
Prediction of the product size distribution in associations of stirred
impeller, 389
bead mills, 228
Centrifugal mill design and performance
Attrition
Development of a centrifugal mill — a chain of simulation, equip-
Breakage mechanisms and mill performance in ultrafine grinding, 135
ment design and model validation, 342
Attrition as a process of comminution and separation, 205
Ceramic media
The modeling of dry grinding of quartz in tumbling media mills, 210
Ball mill Charge motion
Disintegration of microorganisms in a bead mill with a multi-disk Charge motion model for vibration mills with high excitation, 311
impeller, 389 Chemical additives
Ball milling The selection of wet grinding chemical additives based on slurry
Synthesis of thermoelectric materials by mechanical alloying in plane- rheology control, 430
tary ball mills, 149 Classification
Ball mills The modeling of dry grinding of quartz in tumbling media mills, 210
Particle motion and energy distribution in tumbling ball mills, 222 Modeling classifier networks by Markov chains, 266
Ball size effects in comminution Intelligent Liberation and classification of electronic scrap, 295
The effect of ball size on the energy efficiency of hybrid high-pres- Classifier network
sure roll mill /ball mill grinding, 199 Modeling classifier networks by Markov chains, 266
Batch grinding Clays
Wet grinding of gibbsite in a bead-mill, 396 Two dimensions comminution of kaolinite clay particles, 125
Bead-mill Cleaning efficiency
Wet grinding of gibbsite in a bead-mill, 396 Attrition as a process of comminution and separation, 205
Biological material Coal
Use of compression behaviour of legume seeds in view of impact Lab-scale roller table mill for investigating the grinding behaviour of
grinding prediction, 83 coal, 30
Blasting Mechanical strength characterization of feed materials used in iron-
Grindability enhancement by blast-induced microcracks, 52 making industry by Epstein theory, 95
Elsevier Science S.A.
PII: S0032-5910(99)00202-8
Subject Index of Volume 105
Coal blends Discrete element method
Effect of the grinding behaviour of coal blends on coal utilisation for The discrete element method for fine grinding scale-up in Hicom
combustion, 351 mills, 250
Coke Development of a centrifugal mill — a chain of simulation, equip-
Mechanical strength characterization of feed materials used in iron- ment design and model validation, 342
making industry by Epstein theory, 95 Dispersion
Combustion Investigations on ultra-fine grinding of titanium dioxide in a stirred
Effect of the grinding behaviour of coal blends on coal utilisation for media mill, 362
combustion, 351 Distinct element analysis
Comminution Breakage of macroporous alumina beads under compressive loading:
Wet comminution in stirred media mills — research and its practical simulation and experimental validation, 57
application, 14 Dry grinding
Grindability enhancement by blast-induced microcracks, 52 Mechanochemical synthesis of CaTiO, from a CaO-TiO, mixture
Evaluation of the transition matrix for comminuting pea seeds in an and its HR-TEM observation, 162
impact mill using a linear neural network, 119 Dureté
Two dimensions comminution of kaolinite clay particles, 125 Rheological properties of wheat endosperm with a view on grinding
Breakage mechanisms and mill performance in ultrafine grinding, 135 behaviour, 89
Chemical surface modifications of sulphide minerals after comminu-
tion, 141
Numerical model of crushing of grains inside two-dimensional granu-
Electronic scrap
lar materials, 190
Intelligent Liberation and classification of electronic scrap, 295
Particle motion and energy distribution in tumbling ball mills, 222
Elliptical vibrations
The discrete element method for fine grinding scale-up in Hicom
Eccentric vibratory mills — theory and practice, 302
mills, 250
Energy efficiency in comminution
Simulation of jet milling, 257
The effect of ball size on the energy efficiency of hybrid high-pres-
Comminution of metals in shredders with horizontally and vertically
sure roll mill /ball mill grinding, 199
mounted rotors — microprocesses and parameters, 274
Epstein theory
Effect of the grinding behaviour of coal blends on coal utilisation for
Mechanical strength characterization of feed materials used in iron-
combustion, 351
making industry by Epstein theory, 95
Investigations on ultra-fine grinding of titanium dioxide in a stirred
media mill, 362
An on-line pressure vessel rheometer for slurries, 418
Comminution (Broyage)
Failure
Object components for comminution system softsensor design, 424 Rheological properties of wheat endosperm with a view on grinding
Comminution of ceramics behaviour, 89
Comminution of ceramics in stirred media mills and wear of grinding Fine grinding
beads, 374 The discrete element method for fine grinding scale-up in Hicom
Comportement en mouture mills, 250
Rheological properties of wheat endosperm with a view on grinding Operational conditions of a screw-feeder-equipped high-pressure roller
behaviour, 89 mill, 282
Computer simulation Eccentric vibratory mills — theory and practice, 302
Effect of interface energy on the impact strength of agglomerates, 66 Fine particles
Computer simulations Industrial classification in a new impeller wheel classifier, 186
Particle motion and energy distribution in tumbling ball mills, 222 Fines generation
Concentration measurement Fracture kinetics of particle bed comminution — ramifications for
Optical fiber sensor for measuring high particle concentrations, 413 fines production and mill optimization, 113
Control (Control)
Finest particles
Object components for comminution system softsensor design, 424 Industrial classification in a new impeller wheel classifier, 186
Control strategy Flotation
Comparison of control strategies for a hematite processing plant, 443 An approach of the whiteness quantification of crushed and floated
Counter-flow talc concentrate, 106
Process equation for centrifugal counter flow classification, 179 Flow field visualization
Critical size Theoretical and experimental investigation on particle and fluid mo-
Grinding and pozzolanic reactivity of quartz powders, 167 tion in stirred media mills, 406
Crushing Flow model
Grindability enhancement by blast-induced microcracks, 52 Prediction of the product size distribution in associations of stirred
Cryomilling bead mills, 228
Cryomilling of Al/AIN powders, 328 Fluidized bed jet grinding (broyage par jet en lit fluidise)
Crystallite size Experimental investigation on fluidized bed jet grinding, 337
Cryomilling of Al/AIN powders, 328 Fluidized bed (lit fluidise)
Experimental investigation on fluidized bed jet grinding, 337
Fly ash
Pneumatic selection of fly ash: selection methods — influence of the
DEA operating parameters, 172
Effect of interface energy on the impact strength of agglomerates, 66 Fractal dimension
Discrete Element Method An approach of the whiteness quantification of crushed and floated
Particle motion and energy distribution in tumbling ball mills, 222 talc concentrate, 106
456 Subject Index of Volume 105
Fracture High-pressure roller mill
Numerical simulations of agglomerate impact breakage, 74 Operational conditions of a screw-feeder-equipped high-pressure roller
Breakage mechanisms and mill performance in ultrafine grinding, 135 mill, 282
Fracture physics High-pressure roll mills
Numerical model of crushing of grains inside two-dimensional granu- The effect of ball size on the energy efficiency of hybrid high-pres-
lar materials, 190 sure roll mill /ball mill grinding, 199
Fragmentation Hybrid grinding systems
A grindability test to study the influence of material processing on The effect of ball size on the energy efficiency of hybrid high-pres-
impact behaviour, 21 sure roll mill/ball mill grinding, 199
Investigations on ultra-fine grinding of titanium dioxide in a stirred Hydrocyclone
media mill, 362 An on-line pressure vessel rheometer for slurries, 418
Friction
Simulation of jet milling, 257 Image analysis
Steel scrap fragmentation by shredders, 288
Gibbsite Wet grinding of gibbsite in a bead-mill, 396
Wet grinding of gibbsite in a bead-mill, 396 Impact
Grade efficiency Effect of interface energy on the impact strength of agglomerates, 66
Modeling classifier networks by Markov chains, 266 Numerical simulations of agglomerate impact breakage, 74
Grains and seeds Impact crushing
Evaluation of the transition matrix for comminuting pea seeds in an Impact crushing of concrete for liberation and recycling, 39
impact mill using a linear neural network, 119 Impeller wheel classifier
Granular dynamics Industrial classification in a new impeller wheel classifier, 186
Numerical simulations of agglomerate impact breakage, 74 Iron ore sinter
Granular medium Mechanical strength characterization of feed materials used in iron-
Numerical model of crushing of grains inside two-dimensional granu- making industry by Epstein theory, 95
lar materials, 190
Granulometric distribution Jet
Grinding and pozzolanic reactivity of quartz powders, 167 Simulation of jet milling, 257
Grindability test Jet grinding (broyage par jet)
A grindability test to study the influence of material processing on Experimental investigation on fluidized bed jet grinding, 337
impact behaviour, 21
Grinding Kinetics
From the product and process requirements to the milling facility, 2 Modeling of the particle breakage kinetics in the wet mills for the
Grindability enhancement by blast-induced microcracks, 52 paper industry, 237
Use of compression behaviour of legume seeds in view of impact Fine grinding of polymers in a vibrated bead mill, 321
grinding prediction, 83
An approach of the whiteness quantification of crushed and floated Lattice parameter
talc concentrate, 106 Cryomilling of Al/AIN powders, 328
Prediction of the product size distribution in associations of stirred Liberation
bead mills, 228 Impact crushing of concrete for liberation and recycling, 39
Fine grinding of polymers in a vibrated bead mill, 321 Intelligent Liberation and classification of electronic scrap, 295
The influence of suspension properties on ultra-fine grinding in stirred Limestone
ball mills, 357 The influence of suspension properties on ultra-fine grinding in stirred
Grinding bead motion ball mills, 357
Theoretical and experimental investigation on particle and fluid mo-
tion in stirred media mills, 406 Macroporosity
Grinding behaviour Breakage of macroporous alumina beads under compressive loading:
Lab-scale roller table mill for investigating the grinding behaviour of simulation and experimental validation, 57
coal, 30 Markov chain
Grinding experiments Modeling classifier networks by Markov chains, 266
Model-based evaluation of grinding experiments, 243 Markovian process
Grinding kinetics Evaluation of the transition matrix for comminuting pea seeds in an
Investigations on ultra-fine grinding of titanium dioxide in a stirred impact mill using a linear neural network, 119
media mill, 362 Material processing
Grinding mechanism A grindability test to study the influence of material processing on
Determination of the most important grinding mechanism in stirred impact behaviour, 21
media mills by calculating stress intensity and stress number, 382 Mechanical activation
Mechanical activation conditions of the Fe,O, and V,0O, mixture
Hardgrove Index powders in order to obtain a nanometric vanadium spinel ferrite,
Effect of the grinding behaviour of coal blends on coal utilisation for 155
combustion, 351 Mechanical alloying
Heavy metals Synthesis of thermoelectric materials by mechanical alloying in plane-
Attrition as a process of comminution and separation, 205 tary ball mills, 149
Hematite Cryomilling of Al/AIN powders, 328
Comparison of control strategies for a hematite processing plant, 443 Mechanical strength
High excitation Mechanical strength characterization of feed materials used in iron-
Charge motion model for vibration mills with high excitation, 311 making industry by Epstein theory, 95
Subject Index of Volume 105
Mechanochemical synthesis Neural network
Mechanochemical synthesis of CaTiO, from a CaO-TiO, mixture Evaluation of the transition matrix for comminuting pea seeds in an
and its HR-TEM observation, 162 impact mill using a linear neural network, 119
Mesures rhéologiques Non-Newtonian
Rheological properties of wheat endosperm with a view on grinding An on-line pressure vessel rheometer for slurries, 418
behaviour, 89 Nozzle
Metallography Simulation of jet milling, 257
Steel scrap fragmentation by shredders, 288 Nutating mill
Metal recycling The discrete element method for fine grinding scale-up in Hicom
Steel scrap fragmentation by shredders, 288 mills, 250
Metals
Comminution of metals in shredders with horizontally and vertically Object-oriented (Langage Orienté objet)
mounted rotors — microprocesses and parameters, 274 Object components for comminution system softsensor design, 424
Micron range Optical fiber sensor
Process equation for centrifugal counter flow classification, 179 Optical fiber sensor for measuring high particle concentrations, 413
Microprocesses Oxidized species
Comminution of metals in shredders with horizontally and vertically Chemical surface modifications of sulphide minerals after comminu-
mounted rotors — microprocesses and parameters, 274 tion, 141
Microstructure
Mechanochemical synthesis of CaTiO, from a CaO-TiO, mixture Paper pulp
and its HR-TEM observation, 162 Modeling of the particle breakage kinetics in the wet mills for the
Mill circuits paper industry, 237
The modeling of dry grinding of quartz in tumbling media mills, 210 Parameters
Milling Comminution of metals in shredders with horizontally and vertically
The modeling of dry grinding of quartz in tumbling media mills, 210 mounted rotors — microprocesses and parameters, 274
Milling behaviour Particle
Rheological properties of wheat endosperm with a view on grinding Optical fiber sensor for measuring high particle concentrations, 413
behaviour, 89 Particle-bed comminution
Milling facility Fracture kinetics of particle bed comminution — ramifications for
From the product and process requirements to the milling facility, 2 fines production and mill optimization, 113
Mill model validation Particle breakage
Development of a centrifugal mill — a chain of simulation, equip- Numerical model of crushing of grains inside two-dimensional granu-
ment design and model validation, 342 lar materials, 190
Mill optimization Modeling of the particle breakage kinetics in the wet mills for the
Fracture kinetics of particle bed comminution — ramifications for paper industry, 237
fines production and mill optimization, 113 Particle compound material recycling
Mineral processing Impact crushing of concrete for liberation and recycling, 39
Grindability enhancement by blast-induced microcracks, 52 Particle damage in comminution
Minerals The effect of ball size on the energy efficiency of hybrid high-pres-
Change from pressure crushing in roller mills to impact crushing in sure roll mill /ball mill grinding, 199
production of mineral sand, 436 Particle motions
Mining Particle motion and energy distribution in tumbling ball mills, 222
Grindability enhancement by blast-induced microcracks, 52 Particle shape
Model-based evaluation An approach of the whiteness quantification of crushed and floated
Model-based evaluation of grinding experiments, 243 talc concentrate, 106
Modeling Particle size distribution
Modeling of the particle breakage kinetics in the wet mills for the Pneumatic selection of fly ash: selection methods — influence of the
paper industry, 237 operating parameters, 172
Modelling Prediction of the product size distribution in associations of stirred
Process equation for centrifugal counter flow classification, 179 bead mills, 228
Morphology Model-based evaluation of grinding experiments, 243
Wet grinding of gibbsite in a bead-mill, 396 Particle strength
Multimodal distribution function Breakage of macroporous alumina beads under compressive loading:
Impact crushing of concrete for liberation and recycling, 39 simulation and experimental validation, 57
Multi-phase flow Pea
Theoretical and experimental investigation on particle and fluid mo- Evaluation of the transition matrix for comminuting pea seeds in an
tion in stirred media mills, 406 impact mill using a linear neural network, 119
Physical properties
Use of compression behaviour of legume seeds in view of impact
grinding prediction, 83
Nanometric size Pneumatic classifier
Mechanical activation conditions of the Fe,O0, and V,O, mixture Pneumatic selection of fly ash: selection methods — influence of the
powders in order to obtain a nanometric vanadium spinel ferrite, operating parameters, 172
155 Polyethylene
Nepheline syenite Fine grinding of polymers in a vibrated bead mill, 321
Change from pressure crushing in roller mills to impact crushing in Polystyrene
production of mineral sand, 436 Fine grinding of polymers in a vibrated bead mill, 321
458 Subject Index of Volume 105
Poly(vinyl acetate) Semiconductors
Fine grinding of polymers in a vibrated bead mill, 321 Synthesis of thermoelectric materials by mechanical alloying in plane-
Powder tary ball mills, 149
A grindability test to study the influence of material processing on Separation
impact behaviour, 21 Industrial classification in a new impeller wheel classifier, 186
Power consumption Attrition as a process of comminution and separation, 205
Eccentric vibratory mills — theory and practice, 302 Shape factor
Pozzolanic reactivity Two dimensions comminution of kaolinite clay particles, 125
Grinding and pozzolanic reactivity of quartz powders, 167 Shredder
Pressure vessel rheometer Comminution of metals in shredders with horizontally and vertically
An on-line pressure vessel rheometer for slurries, 418 mounted rotors — microprocesses and parameters, 274
Probe Steel scrap fragmentation by shredders, 288
Optical fiber sensor for measuring high particle concentrations, 413 Sieving
Process equation Steel scrap fragmentation by shredders, 288
Process equation for centrifugal counter flow classification, 179 Silica flour
Process kinetics The modeling of dry grinding of quartz in tumbling media mills, 210
Disintegration of microorganisms in a bead mill with a multi-disk Simulation
impeller, 389 Wet comminution in stirred media mills — research and its practical
Process model (Modéle De Procédé) application, 14
Object components for comminution system softsensor design, 424 Single-pipe vibratory mill
Product properties Eccentric vibratory mills — theory and practice, 302
From the product and process requirements to the milling facility, 2 Size distribution
Investigations on ultra-fine grinding of titanium dioxide in a stirred
media mill, 362
Quasi-static
Size distributions
Breakage of macroporous alumina beads under compressive loading:
Two dimensions comminution of kaolinite clay particles, 125
simulation and experimental validation, 57
Size reduction
Breakage mechanisms and mill performance in ultrafine grinding, 135
Fine grinding of polymers in a vibrated bead mill, 321
Reactivity
Slurry rheology control
Chemical surface modifications of sulphide minerals after comminu-
The selection of wet grinding chemical additives based on slurry
tion, 141
rheology control, 430
Recycling
Soft chemistry
Intelligent Liberation and classification of electronic scrap, 295
Mechanical activation conditions of the Fe,O, and V,O, mixture
Refining
powders in order to obtain a nanometric vanadium spinel ferrite,
Modeling of the particle breakage kinetics in the wet mills for the
155
paper industry, 237
Softsensor (Softsensor)
Rheological measurement
Object components for comminution system softsensor design, 424
Rheological properties of wheat endosperm with a view on grinding
Soil remediation
behaviour, 89
Attrition as a process of comminution and separation, 205
Rheology
Steady-state
Two dimensions comminution of kaolinite clay particles, 125
Comparison of control strategies for a hematite processing plant, 443
An on-line pressure vessel rheometer for slurries, 418
Stirred ball mills
Roller crushers
The influence of suspension properties on ultra-fine grinding in stirred
Change from pressure crushing in roller mills to impact crushing in
ball mills, 357
production of mineral sand, 436
Stirred beads mill
Roller table mill
Prediction of the product size distribution in associations of stirred
Lab-scale roller table mill for investigating the grinding behaviour of
bead mills, 228
coal, 30
Stirred media mill
Rupture
Wet comminution in stirred media mills — research and its practical
Rheological properties of wheat endosperm with a view on grinding
application, 14
behaviour, 89
Rutile Investigations on ultra-fine grinding of titanium dioxide in a stirred
media mill, 362
Mechanochemical synthesis of CaTiO, from a CaO-TiO, mixture
Comminution of ceramics in stirred media mills and wear of grinding
and its HR-TEM observation, 162
beads, 374
Determination of the most important grinding mechanism in stirred
Scale-up media mills by calculating stress intensity and stress number, 382
From the product and process requirements to the milling facility, 2 Stochastic
The discrete element method for fine grinding scale-up in Hicom Modeling classifier networks by Markov chains, 266
mills, 250 Stress intensity
Scrap Wet comminution in stirred media mills — research and its practical
Comminution of metals in shredders with horizontally and vertically application, 14
mounted rotors — microprocesses and parameters, 274 Determination of the most important grinding mechanism in stirred
Steel scrap fragmentation by shredders, 288 media mills by calculating stress intensity and stress number, 382
Screw feeder Stress number
Operational conditions of a screw-feeder-equipped high-pressure roller Wet comminution in stirred media mills — research and its practical
mill, 282 application, 14
Subject Index of Volume 105
Determination of the most important grinding mechanism in stirred Viscosity
media mills by calculating stress intensity and stress number, 382 The influence of suspension properties on ultra-fine grinding in stirred
Sulphide minerals ball mills, 357
Chemical surface modifications of sulphide minerals after comminu- Vitreousness
tion, 141 Rheological properties of wheat endosperm with a view on grinding
Surface behaviour, 89
Chemical surface modifications of sulphide minerals after comminu- Vitrosité
tion, 141 Rheological properties of wheat endosperm with a view on grinding
Suspension behaviour, 89
Optical fiber sensor for measuring high particle concentrations, 413 Vortex
Simulation of jet milling, 257
Talc
An approach of the whiteness quantification of crushed and floated
Waste treatment
talc concentrate, 106
Pneumatic selection of fly ash: selection methods — influence of the
Target jet grinding (broyage par jet cible)
operating parameters, 172
Experimental investigation on fluidized bed jet grinding, 337
Wear
Thermoelectrics
The modeling of dry grinding of quartz in tumbling media mills, 210
Synthesis of thermoelectric materials by mechanical alloying in plane-
Eccentric vibratory mills — theory and practice, 302
tary ball mills, 149
Wear of grinding beads
Turbulence
Comminution of ceramics in stirred media mills and wear of grinding
Theoretical and experimental investigation on particle and fluid mo-
beads, 374
tion in stirred media mills, 406
Wet classification
Two opposing nozzles jet grinding (broyage par jets opposes)
Process equation for centrifugal counter flow classification, 179
Experimental investigation on fluidized bed jet grinding, 337
Wet grinding
The selection of wet grinding chemical additives based on slurry
Unmeasured variables (Variables non mesurées)
rheology control, 430
Object components for comminution system softsensor design, 424
Wheat hardness
Rheological properties of wheat endosperm with a view on grinding
Vanadium ferrite
behaviour, 89
Mechanical activation conditions of the Fe,O,; and V,O,; mixture
Whiteness
powders in order to obtain a nanometric vanadium spinel ferrite,
An approach of the whiteness quantification of crushed and floated
155
talc concentrate, 106
Velocity
Simulation of jet milling, 257
Vibrating milling XRD line profile
Eccentric vibratory mills — theory and practice, 302 Mechanical activation conditions of the Fe,O; and V,O,; mixture
Vibration mill powders in order to obtain a nanometric vanadium spinel ferrite,
Charge motion model for vibration mills with high excitation, 311 155