Table Of Content

POWDER TECHNOLOGY Bs ge a ELSEVIER Powder Technology 97 (1998) 273 Author Index of Volume 97 Abe, E., 85 Grace, J.R., 59 Mi, G., 178 Shen, L., 170 Ahmadi, G., 139 Grant, D.J.W., 151 Mihalyko, ., 100 Shishkin, A.V., 227 Akiyama, T., 63 Guang, D., 72 Mihalyk6, C., 51 Silomon-Pflug, H., 160 Amal, R., 26 Miura, H., 124 Smith, D.H., 139 Aoki, K., 63 Hallstrom, A., 45 Spicer, P.T., 26 Hirosue, H., 85 Nakamura, H., 85 Suzuki, S., 178 Bai, D., 59 Hounslow, M.J., 246 Nishimoto, K., 63 Tavares, F.W., 200 Bandyopadhyay, R., 151 Hristov, J.Y., 35 Beydoun, D., 72 Huang, Y.-P., 16 Ottino, J.M., 91 Ulbert, Z., 100 Blackburn, S., 118 Huzzard, R.J., 118 Blickle, T., 51, 100 Hwang, K.-J., 16 Palepu, N.R., 151 Valverde, J., 237 Biilau, H.C., 45 Pearson, J.M.K., 246 Venkata Ramayya, A., 77 Buryak, G.A., 227 Iacob, Gh., 233 Perié, J., | Venkatesh, G.M., 151 Bushell, G., 26 Iguchi, T., 63 Pons, M.N., | Venkateshan, S.P., 77 Instone, T., 246 Powell, V., 139 Vivier, H., | Issangya, A.S., 59 Pratsinis, S.E., 26 Castellanos, A., 237 Vonk, P., 183 Castier, M., 200 Vuéak, M., | Kawase, Y., 124 Ramos, A., 237 Chen, X.D., 191 Knight, P.C., 160, 246 Raper, J., 26 Chhabra, R.P., 6, 72 Waseda, Y., 178 Kossen, N.W.F., 183 Raper, J.A., 72, 208 Watson, P.K., 237 Coleman, J.A.N., 151 Colic, M., 129 Kulkin, S.N., 227 Rennie, P.R., 191 Wright, P.C., 208 Kumar Kolar, A., 77 Rezlescu, N., 233 Wrzosek, T.J., 151 Rudolph, V., 109 Delgado Cuéllar, O., 200 Lakatos, B.G., 51, 100 Yamada, N., 85 Duddu, S., 151 Lu, W.-M., 16 Safatov, A.S., 227 Yashin, V.A., 227 Saito, F., 178 Ferreira, J.M., 6 Mackereth, A.R., 191 Schaafsma, S.H., 183 Zenz, F.A., 146 Frolov, V.G., 227 McCarthy, J.J., 91 Segers, P., 183 Zhang, J.-Y., 109 Fuerstenau, D.W., 129 Meesters, G., 26 Seville, J.P.K., 160 Zhang, M., 170 Elsevier Science S.A. POWDER TECHNOLOGY Powder Technology 97 (1998) 275-278 Subject Index of Volume 97 Acceleration Coating mass distribution accelerating motion of a vertically falling sphere in incompressible coating mass distributions of seed particles in a tumbling fluidized bed Newtonian media: an analytical solution, 6 coater, 85 Adhesion Cohesive adhesion characteristics of whole milk powder to a stainless steel examination of dispersed liquid-phase three-phase fluidized beds. Part surface, 191 1. Non-porous, uniform particle systems, 208 Adsorption Cohesive powder the influence of surfactant impurities on colloid stability and dispersion the tensile strength of cohesive powders and its relationship to of powders in aqueous suspensions, 129 consolidation, free volume and cohesivity, 237 Agglomeration Compaction description of agglomerate growth, 183 an investigation into the kinetics of liquid distribution and growth in examination of dispersed liquid-phase three-phase fluidized beds. Part high shear mixer agglomeration, 246 1. Non-porous, uniform particle systems, 208 Compression—permeability cell an investigation into the kinetics of liquid distribution and growth in stress distribution in a confined wet cake in the compression— high shear mixer agglomeration, 246 permeability cell and its application, 16 Axial dispersion model Consolidation stress a simulation model for analysis and design of continuous grinding the tensile strength of cohesive powders and its relationship to mills, 51 consolidation, free volume and cohesivity, 237 Cycled shear effect of shear schedule on particle size, density, and structure during Bubble detection flocculation in stirred tanks, 26 bubble detection with horizontal pressure gradient measurements in gas-fluidised beds, 77 Bubbling fluidized bed Defluidization effect of particle size on solids mixing in bubbling fluidized beds, 170 examination of dispersed liquid-phase three-phase fluidized beds. Part 1. Non-porous, uniform particle systems, 208 Deposition Calcium carbonate adhesion characteristics of whole milk powder to a stainless steel effect of precipitation conditions on the morphology of calcium surface, 191 carbonate: quantification of crystal shapes using image analysis, | Dispersion Calcium hydroxide the influence of surfactant impurities on colloid stability and dispersion formation of CaTiO; by grinding from mixtures of CaO or Ca(OH), of powders in aqueous suspensions, 129 with anatase or rutile at room temperature, 178 Distribution functions Calcium oxide the hyperbolic tangent distribution family, 100 formation of CaTiO, by grinding from mixtures of CaO or Ca(OH), Dodecanol with anatase or rutile at room temperature, 178 the influence of surfactant impurities on colloid stability and dispersion Calcium titanate of powders in aqueous suspensions, 129 formation of CaTiO, by grinding from mixtures of CaO or Ca(OH), Down-scaling with anatase or rutile at room temperature, 178 description of agglomerate growth, 183 Carbonation Drag effect of precipitation conditions on the morphology of calcium accelerating motion of a vertically falling sphere in incompressible carbonate: quantification of crystal shapes using image analysis, | Newtonian media: an analytical solution, 6 Ceramic injection moulding particle settling in oil-in-water emulsions, 72 slip flow in concentrated alumina suspensions, 118 Drying technology Choking adhesion characteristics of whole milk powder to a stainless steel a novel method for determination of choking velocities, 59 surface, 191 Circulating beds a novel method for determination of choking velocities, 59 Circulating fluidized beds Elutriation predicting the degree of particle refluxing in cocurrent upflow risers, carry-over from shallow fluidized beds, 45 146 Emulsions Coagulation particle settling in oil-in-water emulsions, 72 the influence of surfactant impurities on colloid stability and dispersion Entrainment of powders in aqueous suspensions, 129 carry-over from shallow fluidized beds, 45 Elsevier Science S.A. 276 Subject Index of Volume 97 /P owder Technology 97 (1998) 275-278 Experimental conditions High gradient magnetic separation fractional factorial designs for optimizing experimental conditions for experimental observations on the saturation mass in the capture Hiestand’s Indices of Tableting Performance, 151 process of an ordered transverse high gradient magnetic separation matrix, 233 Filtration High temperature stress distribution in a confined wet cake in the compression— modelling of sintering in high temperature gas fluidisation, 160 permeability cell and its application, 16 Horizontal pressure gradients analysis of operational filtration data Part II: Incomplete cleaning of bubble detection with horizontal pressure gradient measurements in candle filters, 139 gas-fluidised beds, 77 Floc structure Hot-gas cleanup effect of shear schedule on particle size, density, and structure during analysis of operational filtration data Part II: Incomplete cleaning of flocculation in stirred tanks, 26 candle filters, 139 Flow instability flow instability in non-fluidized standpipe flow, 109 IGCC Flow visualization analysis of operational filtration data Part II: Incomplete cleaning of a fractal analysis of solids mixing in two-dimensional vibrating particle candle filters, 139 beds, 63 Image analysis Fluidised beds effect of precipitation conditions on the morphology of calcium modelling of sintering in high temperature gas fluidisation, 160 carbonate: quantification of crystal shapes using image analysis, | Fluidization Image processing examination of dispersed liquid-phase three-phase fluidized beds. Part a fractal analysis of solids mixing in two-dimensional vibrating particle 1. Non-porous, uniform particle systems, 208 beds, 63 Fluidization regime terminology Impurities fluidization of ferromagnetic particles in a magnetic field. Part 2: Field the influence of surfactant impurities on colloid stability and dispersion effects on preliminarily gas fluidized bed, 35 of powders in aqueous suspensions, 129 Fluidized bed coating Indices Tableting Performance coating mass distributions of seed particles in a tumbling fluidized bed fractional factorial designs for optimizing experimental conditions for coater, 85 Hiestand’s Indices of Tableting Performance, 151 Fluidized beds Instability fluidization of ferromagnetic particles in a magnetic field. Part 2: Field a novel method for determination of choking velocities, 59 effects on preliminarily gas fluidized bed, 35 Integrated gasification combined cycle carry-over from shallow fluidized beds, 45 analysis of operational filtration data Part II: Incomplete cleaning of a novel method for determination of choking velocities, 59 candle filters, 139 minimum liquid fluidization velocity in two- and three-phase fluidized Interparticle force beds with non-Newtonian fluids, 124 variations in disperse composition of dry powders according to energy Fractal dimensions of their dispersion, 227 effect of shear schedule on particle size, density, and structure during the tensile strength of cohesive powders and its relationship to flocculation in stirred tanks, 26 consolidation, free volume and cohesivity, 237 Fractals Interparticle forces a fractal analysis of solids mixing in two-dimensional vibrating particle fluidization of ferromagnetic particles in a magnetic field. Part 2: Field beds, 63 effects on preliminarily gas fluidized bed, 35 Fractional factorial designs examination of dispersed liquid-phase three-phase fluidized beds. Part fractional factorial designs for optimizing experimental conditions for 1. Non-porous, uniform particle systems, 208 Hiestand’s Indices of Tableting Performance, 151 Free volume Local cake properties the tensile strength of cohesive powders and its relationship to stress distribution in a confined wet cake in the compression— consolidation, free volume and cohesivity, 237 permeability cell and its application, 16 Gas-fluidised bed Magnetic separation bubble detection with horizontal pressure gradient measurements in experimental observations on the saturation mass in the capture gas-fluidised beds, 77 process of an ordered transverse high gradient magnetic separation Gasification matrix, 233 modelling of sintering in high temperature gas fluidisation, 160 Magnetism Granular media fluidization of ferromagnetic particles in a magnetic field. Part 2: Field particle dynamics simulation: a hybrid technique applied to granular effects on preliminarily gas fluidized bed, 35 mixing, 91 Mechanochemistry Granulation formation of CaTiO; by grinding from mixtures of CaO or Ca(OH), an investigation into the kinetics of liquid distribution and growth in with anatase or rutile at room temperature, 178 high shear mixer agglomeration, 246 Mercury intrusion Gravitational fields an investigation into the kinetics of liquid distribution and growth in Monte Carlo simulation of particle segregation, 200 high shear mixer agglomeration, 246 Grinding Milk products formation of CaTiO, by grinding from mixtures of CaO or Ca(OH)> adhesion characteristics of whole milk powder to a stainless steel with anatase or rutile at room temperature, 178 surface, 191 Grinding mills Minimum fluidization velocity a simulation model for analysis and design of continuous grinding minimum liquid fluidization velocity in two- and three-phase fluidized mills, 51 beds with non-Newtonian fluids, 124 Subject Index of Volume 97 /P owder Technology 97 (1998) 275-278 Mixer Refluxing an investigation into the kinetics of liquid distribution and growth in predicting the degree of particle refluxing in cocurrent upflow risers, high shear mixer agglomeration, 246 146 Mixing Rheological parameters particle dynamics simulation: a hybrid technique applied to granular slip flow in concentrated alumina suspensions, 118 mixing, 91 Risers Modelling predicting the degree of particle refluxing in cocurrent upflow risers, a simulation model for analysis and design of continuous grinding 146 mills, 51 description of agglomerate growth, 183 Sample preparation Moments variations in disperse composition of dry powders according to energy the hyperbolic tangent distribution family, 100 of their dispersion, 227 Monte Carlo simulation Saturation mass Monte Carlo simulation of particle segregation, 200 experimental observations on the saturation mass in the capture Morphology process of an ordered transverse high gradient magnetic separation effect of precipitation conditions on the morphology of calcium matrix, 233 carbonate: quantification of crystal shapes using image analysis, | Sedimentation effect of shear schedule on particle size, density, and structure during Non-Newtonian liquids flocculation in stirred tanks, 26 minimum liquid fluidization velocity in two- and three-phase fluidized particle settling in oil-in-water emulsions, 72 beds with non-Newtonian fluids, 124 Settling velocity particle settling in oil-in-water emulsions, 72 Orifices Shear induced flocculation flow instability in non-fluidized standpipe flow, 109 effect of shear schedule on particle size, density, and structure during flocculation in stirred tanks, 26 Simulation Parallel wire matrix a simulation model for analysis and design of continuous grinding experimental observations on the saturation mass in the capture mills, 51 process of an ordered transverse high gradient magnetic separation bubble detection with horizontal pressure gradient measurements in matrix, 233 gas-fluidised beds, 77 Parameter estimation particle dynamics simulation: a hybrid technique applied to granular the hyperbolic tangent distribution family, 100 mixing, 91 Particle dispersion Sintering variations in disperse composition of dry powders according to energy modelling of sintering in high temperature gas fluidisation, 160 of their dispersion, 227 Size distributions Particle dynamics the hyperbolic tangent distribution family, 100 particle dynamics simulation: a hybrid technique applied to granular Slip flow mixing, 91 slip flow in concentrated alumina suspensions, 118 Particle growth Solids mixing coating mass distributions of seed particles in a tumbling fluidized bed effect of particle size on solids mixing in bubbling fluidized beds, 170 coater, 85 Solution splitting Particle segregation accelerating motion of a vertically falling sphere in incompressible Monte Carlo simulation of particle segregation, 200 Newtonian media: an analytical solution, 6 Particle size Sphere—fluid an investigation into the kinetics of liquid distribution and growth in accelerating motion of a vertically falling sphere in incompressible high shear mixer agglomeration, 246 Newtonian media: an analytical solution, 6 Particle size analysis Spraying variations in disperse composition of dry powders according to energy coating mass distributions of seed particles in a tumbling fluidized bed of their dispersion, 227 coater, 85 Particle size distribution Standpipes variations in disperse composition of dry powders according to energy flow instability in non-fluidized standpipe flow, 109 of their dispersion, 227 Stress distribution Planetary ball mill formation of CaTiO, by grinding from mixtures of CaO or Ca(OH), stress distribution in a confined wet cake in the compression— with anatase or rutile at room temperature, 178 permeability cell and its application, 16 Pneumatic transport Stress free surfaces a novel method for determination of choking velocities, 59 flow instability in non-fluidized standpipe flow, 109 Porosity Surfactants an investigation into the kinetics of liquid distribution and growth in the influence of surfactant impurities on colloid stability and dispersion high shear mixer agglomeration, 246 of powders in aqueous suspensions, 129 Precipitation Suspensions effect of precipitation conditions on the morphology of calcium slip flow in concentrated alumina suspensions, 118 carbonate: quantification of crystal shapes using image analysis, | adhesion characteristics of whole milk powder to a stainless steel surface, 191 Randomness bubble detection with horizontal pressure gradient measurements in Tangent hyperbolic distribution family gas-fluidised beds, 77 the hyperbolic tangent distribution family, 100 278 Subject Index of Volume 97 / Powder Technology 97 (1998) 275-278 Tensile strength Uniformity of coating the tensile strength of cohesive powders and its relationship to coating mass distributions of seed particles in a tumbling fluidized bed consolidation, free volume and cohesivity, 237 coater, 85 Three-phase flow Unsaturated flow minimum liquid fluidization velocity in two- and three-phase fluidized description of agglomerate growth, 183 beds with non-Newtonian fluids, 124 Titanium dioxide formation of CaTiO, by grinding from mixtures of CaO or Ca(OH), Vertical pressure gradients with anatase or rutile at room temperature, 178 bubble detection with horizontal pressure gradient measurements in Torque gas-fluidised beds, 77 an investigation into the kinetics of liquid distribution and growth in Vibrated beds high shear mixer agglomeration, 246 a fractal analysis of solids mixing in two-dimensional vibrating particle Transmitted force beds, 63 stress distribution in a confined wet cake in the compression— permeability cell and its application, 16 Transverse ordered matrix experimental observations on the saturation mass in the capture Wake exchange coefficient process of an ordered transverse high gradient magnetic separation effect of particle size on solids mixing in bubbling fluidized beds, matrix, 233 170 Two-phase fiow Wall friction minimum liquid fluidization velocity in two- and three-phase fluidized stress distribution in a confined wet cake in the compression— beds with non-Newtonian fluids, 124 permeability cell and its application, 16