Planning Instructions Fire Alarm System EBL512 G3 United version 2.7.x

168 Pages·2012·2.89 MB·English

by  Jan Pettersson

Planning Instructions
MEW01472
Revision -

Fire Alarm System EBL512 G3
United version 2.7.x

Author: Jan Pettersson Date of issue: 2012-04-05 Date of rev:
This page has deliberately been left blank.
Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
Table of contents
1 Introduction________________________________ 9
2 Definitions / Explanations ___________________ 11
2.1 PEWN AB _______________________________________ 11
2.2 Alarm points _____________________________________ 11
2.2.1 Smoke detector _______________________________ 11
2.2.2 Sensor ______________________________________ 11
2.2.3 Analog detector _______________________________ 11
2.2.4 Analog (Sensor) Base (ASB) ____________________ 11
2.2.5 Conventional detector __________________________ 11
2.2.6 (Conventional Detector) Base (CDB) ______________ 11
2.2.7 Addressable __________________________________ 11
2.2.8 Conventional zone line input / External line _________ 12
2.3 Output unit ______________________________________ 12
2.4 Output / Control output _____________________________ 12
2.5 Short circuit isolator (ISO) __________________________ 12
2.6 Display unit (D.U.) ________________________________ 12
2.7 COM loop _______________________________________ 12
2.8 Control Unit / C.U. / C.I.E. __________________________ 12
2.9 Fire Brigade Panel (FBP) ___________________________ 12
2.10 Control panel (CP) ________________________________ 12
2.11 System __________________________________________ 12
2.12 Network / TLON® / LonWorks® / Echelon / Node / TLON
Conn. board / Channel / Backbone net / Router / Repeater _______ 13
2.13 LED ____________________________________________ 13
2.14 External Indicator (Ext. LED) ________________________ 13
2.15 Display / LCD ____________________________________ 13
2.16 Door open (Door / Key switch) _______________________ 13
2.17 Site Specific Data (SSD) ____________________________ 14
2.18 Software (S/W) / System program ____________________ 14
2.19 Mixed system ____________________________________ 14
3 Overview _________________________________ 15
3.1 The EBL512 G3 system ____________________________ 15
3.1.1 Printer ______________________________________ 15
3.1.2 Expansion boards _____________________________ 15
3.1.3 Power supply _________________________________ 15
3.2 S/W versions _____________________________________ 16
3.3 Documents ______________________________________ 16
3.4 Applications _____________________________________ 16
3.5 PC software (S/W) ________________________________ 16
3.5.1 Win512 version 2.7.x __________________________ 16
3.5.2 WinG3 version 1.1.x ___________________________ 17
3.5.3 TLON Manager _______________________________ 17
1
Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
3.5.4 Web512 II Config Tool 2.7 ______________________ 17
4 Control Unit / TLON Network _______________ 18
4.1 The TLON network ________________________________ 18
4.2 Single TLON Network / Redundancy in distributed system _ 18
5 Control Units 5000 and 5001 _________________ 20
5.1 Mounting plates ___________________________________ 22
5.1.1 Mounting plate for 19" mounting rack, 5020 ________ 22
5.1.2 Mounting plate for inflammable wall, 5021 _________ 22
5.2 COM loops ______________________________________ 23
5.3 Programmable voltage outputs (S0-S3) ________________ 25
5.4 Programmable relay outputs (R0-R1) __________________ 25
5.5 Programmable inputs (I0-I3) _________________________ 25
5.6 Relay outputs for routing equipment (tx) _______________ 26
5.6.1 Fire alarm output ______________________________ 26
5.6.2 Fault condition output __________________________ 26
6 Expansion boards 458x _____________________ 27
6.1 Expansion board no. (address) setting __________________ 28
6.2 8 zones expansion board 4580 _______________________ 28
6.2.1 Type of detectors = Type of zone line input _________ 29
6.2.2 Input states __________________________________ 30
6.3 8 relays expansion board 4581 _______________________ 31
6.4 I/O Matrix board 4582 _____________________________ 31
6.4.1 Generic _____________________________________ 33
6.4.2 Fan control __________________________________ 33
6.4.3 Zone control _________________________________ 34
6.5 Inputs and outputs expansion board 4583 _______________ 34
6.6 External FBP / DU interface board 1587 _______________ 34
7 Printer ___________________________________ 35
8 TLON connection board 1590 ________________ 36
8.1 Single TLON Network _____________________________ 36
8.2 Network programming _____________________________ 36
9 Peripheral devices __________________________ 37
9.1 COM loop units ___________________________________ 37
9.1.1 Input units ___________________________________ 39
9.1.2 Addressable I/O units __________________________ 46
9.1.3 Alarm devices (addressable sounders) _____________ 48
9.1.4 Short circuit isolators (addressable) _______________ 49
9.1.5 Units for Hazardous (Ex) areas ___________________ 50
9.1.6 Other COM loop units __________________________ 51
9.2 Units connected to the RS485 interface ________________ 53
9.2.1 External Fire Brigade Panels _____________________ 53
9.2.2 Alert Annunciation Units _______________________ 55
9.2.3 External Presentation Units ______________________ 56
9.3 Units connected to the RS232 interface J7 ______________ 57
2
Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
9.3.1 Web-servers __________________________________ 57
9.4 Other units _______________________________________ 57
9.4.1 Alert Annunciation Controllers ___________________ 57
9.4.2 External LED ________________________________ 58
9.4.3 Alarm devices (sounders, etc.) ___________________ 58
9.4.4 Door release magnets __________________________ 58
9.4.5 Boxes _______________________________________ 59
9.4.6 Duct detector chambers _________________________ 59
10 Programmable inputs _______________________ 60
10.1 The 3361 unit's Inputs In0 / Z & In1 ___________________ 60
10.1.1 Input In0 ____________________________________ 60
10.1.2 Input In1 ____________________________________ 60
11 Input programming ________________________ 61
11.1 Trigger conditions _________________________________ 61
11.2 Logic ___________________________________________ 63
12 Programmable outputs ______________________ 64
12.1 Control unit outputs S0 – S3 _________________________ 65
12.2 Control unit outputs R0 & R1 ________________________ 65
12.3 8 relays expansion board 4581 Output 0 – Output 7 _______ 65
12.4 The 3361 unit's Outputs Re0 & Re1 ___________________ 66
12.5 The 3364 unit's VO0 – VO2 _________________________ 66
12.6 The 3377 unit's Output (siren) ________________________ 66
12.7 The 3379 unit's Output (sounder) _____________________ 66
12.8 The 4380 unit's Output (beacon) ______________________ 66
13 Output programming _______________________ 67
13.1 Type of output ____________________________________ 67
13.2 Logic ___________________________________________ 68
13.3 Supervised / Not supervised _________________________ 68
13.4 Time Activation Output ____________________________ 68
13.5 Control expression ________________________________ 71
13.5.1 Trigger conditions _____________________________ 71
13.5.2 Logical operators ______________________________ 75
13.5.3 Control expression examples ____________________ 75
14 Interlocking function _______________________ 79
14.1 Programming of interlocking function _________________ 79
14.1.1 Interlocking output ____________________________ 79
14.1.2 Interlocking input _____________________________ 79
14.1.3 Interlocking combination _______________________ 79
14.2 Interlocking indications _____________________________ 81
14.3 Information of interlocking combinations (H9) __________ 81
14.3.1 Display interlocking information (H9/C1) __________ 81
14.3.2 Activate interlocking output (H9/C2) ______________ 81
14.3.3 Reset interlocking output (H9/C3) ________________ 82
14.3.4 Disable interlocking output (H9/C4) _______________ 82
14.3.5 Re-enable interlocking output (H9/C5) _____________ 82
3
Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
14.4 Interlocking control expressions ______________________ 82
15 Fire Door Closing __________________________ 83
16 Functions / Services / Features _______________ 84
16.1 Sensor value _____________________________________ 84
16.2 Week average sensor value __________________________ 84
16.3 Decision value ____________________________________ 85
16.4 Alarm algorithms for smoke detectors / Detection levels /
Offsets 85
16.4.1 Alarm algorithm / Alternative alarm algorithm ______ 86
16.4.2 Filtering algorithm ____________________________ 87
16.4.3 Smouldering smoke algorithm ___________________ 89
16.5 Performance factor ________________________________ 90
16.6 Algorithms for analog heat detectors __________________ 91
16.6.1 Class A1 algorithm ____________________________ 92
16.6.2 Class A2 S algorithm __________________________ 92
16.6.3 Class B S algorithm ____________________________ 92
16.7 Self verification ___________________________________ 92
16.8 Minimum / Maximum sensor values ___________________ 93
16.9 2-zone / 2-address dependence (Co-incidence alarm) ______ 94
16.9.1 2-zone dependence ____________________________ 94
16.9.2 2-address (-unit) dependence ____________________ 95
16.9.3 Reset of 2-zone / 2-address dependence (co-incidence
alarm 95
16.10 Delayed alarm __________________________________ 96
16.11 Alarm Verification Facility ________________________ 96
16.12 Alert Annunciation ______________________________ 97
16.13 Alarm Acknowledgement Facility (AAF) _____________ 99
16.14 Quiet alarm ___________________________________ 101
16.15 Fire alarm type A and Fire alarm type B _____________ 101
16.15.1 Fire alarm type B ___________________________ 102
16.15.2 Fire alarm type A __________________________ 102
16.16 Disable alarm points and outputs __________________ 102
16.16.1 Disable zone ______________________________ 103
16.16.2 Disable zone / address _______________________ 103
16.16.3 Disable control output _______________________ 103
16.16.4 Disable / Re-enable output type _______________ 103
16.16.5 Disable / Re-enable alarm devices _____________ 103
16.17 Disable interlocking output _______________________ 103
16.18 Disable outputs for routing equipment ______________ 104
16.19 Disconnect & Re-connect loop / zone line input _______ 104
16.20 External time channels __________________________ 104
16.21 Test mode ____________________________________ 104
16.22 Test alarm devices ______________________________ 105
16.23 Test of routing equipment ________________________ 105
16.24 Calibration of supervised outputs __________________ 105
4
Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
16.25 Service signal _________________________________ 105
16.26 Fault signal (fault condition) ______________________ 106
16.27 Alarm texts ___________________________________ 106
16.27.1 Creating the alarm texts via Win512 version 2.7.x _ 107
16.27.2 Downloading alarm texts to the DU:s 1728 / 1735 /
1736 and ext. FBP:s 1826 / 1828 ________________________ 108
16.28 Real time clock (RTC) __________________________ 108
16.28.1 Daylight saving time ________________________ 109
16.29 Loss of main power source _______________________ 109
16.29.1 Fault: Loss of main power source ______________ 109
16.29.2 LCD backlight _____________________________ 109
16.30 Evacuate _____________________________________ 109
16.31 Win512 Tools menu ____________________________ 110
17 Redundancy in distributed system ___________ 112
17.1 Master and Slaves ________________________________ 112
17.1.1 Master unit _________________________________ 112
17.1.2 Slave unit ___________________________________ 113
17.2 Several control units ______________________________ 115
17.2.1 Master unit _________________________________ 115
17.2.2 Several control units (slaves) ___________________ 115
18 Special New Zealand functions ______________ 118
18.1 Alarm devices ___________________________________ 118
18.1.1 Silence alarm devices (inside switch) _____________ 118
18.1.2 New Zealand FB Silence switch (outside switch) ____ 118
18.2 Battery faults ____________________________________ 120
18.2.1 FAULT: Battery _____________________________ 120
18.2.2 FAULT: Low battery capacity __________________ 120
18.3 Routing equipment isolate (disable) __________________ 120
18.4 Acknowledged alarm _____________________________ 120
19 Cyber sensor functions _____________________ 122
19.1 Pulse up – down counter ___________________________ 123
19.1.1 Pulse up – down counter for smoke ______________ 123
19.1.2 Pulse up – down counter for temperature __________ 123
19.1.3 Pulse up – down counter for smoke & temperature __ 123
19.2 Fire judgement __________________________________ 123
19.3 Alarm threshold levels ____________________________ 124
19.4 Learning function / Learning conditions _______________ 124
19.4.1 Learning conditions ___________________________ 124
19.5 Alarm delay time _________________________________ 126
19.6 Analog data output _______________________________ 127
19.7 Sensitivity compensation __________________________ 127
19.8 Self diagnosis of internal devices ____________________ 128
19.9 Address setting check _____________________________ 128
20 Control unit properties (settings) ____________ 129
20.1 Control unit properties ____________________________ 129
5
Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
20.1.1 General data ________________________________ 129
20.1.2 Type of control unit ___________________________ 129
20.1.3 LED indications by inputs ______________________ 130
20.1.4 Miscellaneous _______________________________ 130
20.1.5 Selective alarm presentation ____________________ 131
20.2 Log events ______________________________________ 132
20.3 Log setup _______________________________________ 132
20.4 Control unit information ___________________________ 132
21 System properties (settings) _________________ 133
21.1 System data _____________________________________ 133
21.1.1 Logical name ________________________________ 133
21.1.2 Alarm delay time _____________________________ 133
21.1.3 Main power loss fault delay time ________________ 133
21.1.4 Alarm reset _________________________________ 133
21.1.5 Door closing by time __________________________ 134
21.1.6 Miscellaneous _______________________________ 134
21.1.7 LCD in quiescent state ________________________ 135
21.2 Time channels ___________________________________ 135
21.3 Time activation output ____________________________ 135
21.4 Door open ______________________________________ 136
21.4.1 Indication door open affected by _________________ 136
21.4.2 Disablement of routing equipment _______________ 136
21.5 National holidays ________________________________ 137
21.6 Alarm algorithms ________________________________ 137
21.6.1 Classic smoke detectors' properties _______________ 137
21.6.2 Heat detectors' (3308, 3309, 3316 and 4300) properties138
21.6.3 Smoke detectors' (3304, 4301, 3316 and 4300) properties139
21.6.4 Multi detectors' (3316 and 4300 + decision algorithm)
properties __________________________________________ 139
21.7 System information _______________________________ 140
21.8 Alert Annunciation and Alarm Acknowledgement Facility 140
21.8.1 Alert Annunciation ___________________________ 140
21.8.2 Alarm Acknowledgement Facility _______________ 140
21.9 Two zone dependence _____________________________ 140
22 Compatibility_____________________________ 142
23 Cable types ______________________________ 143
23.1 TLON Network cables ____________________________ 143
23.2 COM loop cables_________________________________ 143
23.3 Ext. FBP / Display Units cables _____________________ 143
23.4 Conventional zone line cables _______________________ 143
23.5 Alarm device cables ______________________________ 144
23.6 Other cables _____________________________________ 144
24 COM loop cable length _____________________ 145
25 Current consumption ______________________ 148
6
Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
26 Power supply _____________________________ 152
26.1 Charger functions ________________________________ 153
26.1.1 Charging ___________________________________ 153
26.1.2 Battery charging functions: _____________________ 153
26.1.3 Security functions ____________________________ 153
26.2 Current consumption calculations ____________________ 154
26.3 Rectifier (main power source) _______________________ 155
26.4 Battery (second power source) ______________________ 155
26.5 Fuses __________________________________________ 156
26.6 Form / Table of current consumption _________________ 157
27 S/W versions _____________________________ 158
28 Technical data ____________________________ 159
29 Limitations_______________________________ 160
29.1 User definable texts _______________________________ 160
29.2 C.i.e. / System ___________________________________ 160
30 National regulations _______________________ 162
31 Drawings / connection diagrams _____________ 163
32 Revision history ___________________________ 164

Drawings according to the valid table of drawings.

7
Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x

8