National Lubricating Grease Institute. NLGI Spokesman 1994 - 1995: Vol 58 Index

5 Pages·1.3 MB·English

Index to the NLGI Spokesman, Volume 58
April, 1994 — March, 1995
Index to Authors Generation High Performance Titanium Complex
Barrett, C., Bjel, I., Use of High Viscosity Base Grease, April 1994.
Oil Gels for Heavy Duty Open Gear Drive Kyriakopoulos, Fully Formulated H1 Aluminum
Lubrication, August 1994. Complex Food Machinery Greases, July 1994.
Beret, S., Assessment of Grease EP Performance Mita, M., Masters, K.R., Automatic Temperature
and EP Testing, November 1994. Control System for the STRATCO Grease Contactor,
Bessette, P.A., Vapor Pressure of Lubricants, May 1994.
June 1994. Mulvihill, M.A., Witte, A.C., A New Approach
Dholakia, V.P., Klaus, E.E., and Duda, J.L., to Wheel/Rail Lubrication, March 1995.
Development of a Microoxidation Test for Grease, Richardson, R.C., Scinto, P.R., The Effects of
April 1994. Gear Lubricant Components on Oil Seal
Dholakia, V.P., Klaus, E.E., Duda, J.L., Compatibility, September 1994.
Comparison of Grease Oxidation Tests with Seven Roehrs, I., RoBrucker, T., Performance and
Commercial Greases, May 1994. Ecology — Two Aspects for Modern Greases,
Dresel, W.H., Heckler, R.P., Some Aspects of March 1995.
Tomorrow’s Greases, April 1994. Rohr, O., Sulfur: The Ashless Additive. Sulfur
Fennema, R.L., Technology and Lubricants of as a Key Element in EP Greases and in General
the 1995 Domestic Automobiles, January 1995. Lubricants, August 1994.
Heffernan, J.P., New Alternative Options in Root, J.C., A Comparative Study of Polyurea and
Drum Specification Selection, January 1995. Lithium Complex Grease Thickeners, December
Ischuk, Y.L., Umanskaya, O.I., Modified 1994.
Montmorillonite Clays Used in the Manufacture of Root, J.C., The World’s First Fibrous Polyurea
Lubricating Greases, October 1994. Grease, February 1995.
Kawamura, Y., Shimizu, K., Takeuchi, K., Sukys, D., Camino, C., Natural Ester
Okamura, S., Kinoshita, S., Kinoshita, H., Komiya, Biodegradable Fluids and Lubrication Trends for the
H., Sakurai, T., Suzuki, M., Terai, S., Naka, M., Future - Part I: Systematic Removal of Components
Nagano, K., Nishimura, M., Hirano, O., and Based on Used Fluid Regulations, September 1994.
Hoshino, M., Standardization of Tests for Grease Sullivan, W., Bosch, H.W., Worldwide Trends in
Life and the Effect of Test Conditions, May 1994. Automotive Gear Oils, July 1994.
Kawamura, Y., Shimizu, K., Takeuchi, K., Terai, S., Development of a New Method for
Okamura, S., Kinoshita, S., Kinoshita, H., Komiya, Testing Automobile Electric Contact Grease,
H., Sakurai, T., Suzuki, M., Terai, S., Naka, M., September 1994.
Nagano, K., Nishimura, M., Hirano, O., and Trabert, G.R., Carlson, M., Customer Driven to a
Hoshino, M., The Effect of Grease Composition on New Grease Plant, July 1994.
Grease Life Part Two of Factors Affecting Grease Vettel, P., Lochte, M., A New Screening Test for
Life, June 1994. Limited Slip Gear Lubricant Performance, February
Kieke, M., Naé, H., Rheological Properties of 1995.
Grease Systems: Viscosity, Viscoelasticity and the Ward, C.E., Littlefield, C.E., Practical Aspects of
Effect of Temperature, December 1994. Grease Noise Testing, August 1994.
Krol, R., Quantitative Analysis of Aluminum Witte, AC., Turner, D.A., Grease Making in the
Complex Greases by FTIR Spectroscopy, March 90’s A Comparison of Commerical Grease
1995. Manufacturing Processes, June 1994.
Kumar, A., Sayanna, E., Verma, A.S., Naithani, Wunsch, F., Grease Lubrication of High-Speed
K.P., Rai, M.M., and Bhatnagar, A.K., A New Hybrid Bearings, February 1995.
VOLUME 59, NUMBER |
Index to the NLGI Spokesman, Volume 58
April, 1994 — March, 1995
Index to Authors Generation High Performance Titanium Complex
Barrett, C., Bjel, I., Use of High Viscosity Base Grease, April 1994.
Oil Gels for Heavy Duty Open Gear Drive Kyriakopoulos, Fully Formulated H1 Aluminum
Lubrication, August 1994. Complex Food Machinery Greases, July 1994.
Beret, S., Assessment of Grease EP Performance Mita, M., Masters, K.R., Automatic Temperature
and EP Testing, November 1994. Control System for the STRATCO Grease Contactor,
Bessette, P.A., Vapor Pressure of Lubricants, May 1994.
June 1994. Mulvihill, M.A., Witte, A.C., A New Approach
Dholakia, V.P., Klaus, E.E., and Duda, J.L., to Wheel/Rail Lubrication, March 1995.
Development of a Microoxidation Test for Grease, Richardson, R.C., Scinto, P.R., The Effects of
April 1994. Gear Lubricant Components on Oil Seal
Dholakia, V.P., Klaus, E.E., Duda, J.L., Compatibility, September 1994.
Comparison of Grease Oxidation Tests with Seven Roehrs, I., RoBrucker, T., Performance and
Commercial Greases, May 1994. Ecology — Two Aspects for Modern Greases,
Dresel, W.H., Heckler, R.P., Some Aspects of March 1995.
Tomorrow’s Greases, April 1994. Rohr, O., Sulfur: The Ashless Additive. Sulfur
Fennema, R.L., Technology and Lubricants of as a Key Element in EP Greases and in General
the 1995 Domestic Automobiles, January 1995. Lubricants, August 1994.
Heffernan, J.P., New Alternative Options in Root, J.C., A Comparative Study of Polyurea and
Drum Specification Selection, January 1995. Lithium Complex Grease Thickeners, December
Ischuk, Y.L., Umanskaya, O.I., Modified 1994.
Montmorillonite Clays Used in the Manufacture of Root, J.C., The World’s First Fibrous Polyurea
Lubricating Greases, October 1994. Grease, February 1995.
Kawamura, Y., Shimizu, K., Takeuchi, K., Sukys, D., Camino, C., Natural Ester
Okamura, S., Kinoshita, S., Kinoshita, H., Komiya, Biodegradable Fluids and Lubrication Trends for the
H., Sakurai, T., Suzuki, M., Terai, S., Naka, M., Future - Part I: Systematic Removal of Components
Nagano, K., Nishimura, M., Hirano, O., and Based on Used Fluid Regulations, September 1994.
Hoshino, M., Standardization of Tests for Grease Sullivan, W., Bosch, H.W., Worldwide Trends in
Life and the Effect of Test Conditions, May 1994. Automotive Gear Oils, July 1994.
Kawamura, Y., Shimizu, K., Takeuchi, K., Terai, S., Development of a New Method for
Okamura, S., Kinoshita, S., Kinoshita, H., Komiya, Testing Automobile Electric Contact Grease,
H., Sakurai, T., Suzuki, M., Terai, S., Naka, M., September 1994.
Nagano, K., Nishimura, M., Hirano, O., and Trabert, G.R., Carlson, M., Customer Driven to a
Hoshino, M., The Effect of Grease Composition on New Grease Plant, July 1994.
Grease Life Part Two of Factors Affecting Grease Vettel, P., Lochte, M., A New Screening Test for
Life, June 1994. Limited Slip Gear Lubricant Performance, February
Kieke, M., Naé, H., Rheological Properties of 1995.
Grease Systems: Viscosity, Viscoelasticity and the Ward, C.E., Littlefield, C.E., Practical Aspects of
Effect of Temperature, December 1994. Grease Noise Testing, August 1994.
Krol, R., Quantitative Analysis of Aluminum Witte, AC., Turner, D.A., Grease Making in the
Complex Greases by FTIR Spectroscopy, March 90’s A Comparison of Commerical Grease
1995. Manufacturing Processes, June 1994.
Kumar, A., Sayanna, E., Verma, A.S., Naithani, Wunsch, F., Grease Lubrication of High-Speed
K.P., Rai, M.M., and Bhatnagar, A.K., A New Hybrid Bearings, February 1995.
VOLUME 59, NUMBER |
Index by Article Title Selection, Heffernan, J.P., January 1995.
The Ashless Additive. Sulfur as a Key Element A New Approach to Wheel/Rail Lubrication,
in EP Greases and in General Lubricants, Rohr, O., Mulvihill, M.A., Witte, A.C., March 1995.
Sulfur: August 1994. A New Generation High Performance Titanium
Assessment of Grease EP Performance and EP Complex Grease, Kumar, A., Sayanna, E., Verma,
Testing, Beret, S., November 1994. A.S., Naithani, K.P., Rai, M.M., and Bhatnagar,
Automatic Temperature Control System for the A.K., April 1994.
STRATCO Grease Contactor, Mita, M., Masters, A New Screening Test for Limited Slip Gear
K.R., May 1994. Lubricant Performance, Vettel, P., Lochte, M.,
A Comparative Study of Polyurea and Lithium February 1995.
Complex Grease Thickeners, Root, J.C., December Performance and Ecology — Two Aspects for
1994. Modern Greases, Roehrs, I., RoBrucker, T., March
Comparison of Grease Oxidation Tests with 1995.
Seven Commercial Greases, Dholakia, V.P., Klaus, Practical Aspects of Grease Noise Testing, Ward,
E.E., Duda, J.L., May 1994. C.E., Littlefield, C.E., August 1994.
Customer Driven to a New Grease Plant, Trabert, Quantitative Analysis of Aluminum Complex
G.R., Carlson, M., July 1994. Greases by FTIR Spectroscopy, Krol, R., March 1995.
Development of a Microoxidation Test for Rheological Properties of Grease Systems:
Grease, Dholakia, V.P., Klaus, E.E., and Duda, J.L., Viscosity, Viscoelasticity and the Effect of
April 1994. Temperature, Kieke, M., Naé, H., December 1994.
Development of a New Method for Testing Standardization of Tests for Grease Life and the
Automobile Electric Contact Grease, Terai, S., Effect of Test Conditions, Kawamura, Y., Shimizu,
September 1994. K., Takeuchi, K., Okamura, S., Kinoshita, S.,
The Effect of Grease Composition on Grease Kinoshita, H., Komiya, H., Sakurai, T., Suzuki, M.,
Life Part Two of Factors Affecting Grease Life, Terai, S., Naka, M., Nagano, K., Nishimura, M.,
Kawamura, Y., Shimizu, K., Takeuchi, K., Okamura, Hirano, O., and Hoshino, M., May 1994.
S., Kinoshita, S., Kinoshita, H., Komiya, H., Some Aspects of Tomorrow’s Greases, Dresel,
Sakurai, T., Suzuki, M., Terai, S., Naka, M., W.H., Heckler, R.P., April 1994.
Nagano, K., Nishimura, M., Hirano, O., and Technology and Lubricants of the 1995 Domestic
Hoshino, M., June 1994. Automobiles, Fennema, R.L., January 1995.
The Effects of Gear Lubricant Components on Use of High Viscosity Base Oil Gels for Heavy
Oil Seal Compatibility, Richardson, R.C., Scinto, Duty Open Gear Drive Lubrication, Barrett, C..,
P.R., September 1994. Bjel, I., August 1994.
Fully Formulated H1 Aluminum Complex Food Vapor Pressure of Lubricants, Bessette, P.A.,
Machinery Greases, Kyriakopoulos, July 1994. June 1994.
Grease Lubrication of High-Speed Hybrid The World’s First Fibrous Polyurea Grease,
Bearings, Wunsch, F., February 1995. Root, J.C., February 1995.
Grease Making in the 90’s A Comparison of Worldwide Trends in Automotive Gear Oils,
Commerical Grease Manufacturing Processes, Sullivan, W., Bosch, H.W., July 1994.
Witte, AC., Turner, D.A., June 1994.
Modified Montmorillonite Clays Used in the Index by Category
Manufacture of Lubricating Greases, Ischuk, Y.L.,
Umanskaya, O.I., October 1994. General
Natural Ester Biodegradable Fluids and Fully Formulated H1 Aluminum Complex Food
Lubrication Trends for the Future - Part I: Machinery Greases, Kyriakopoulos, July 1994.
Systematic Removal of Components Based on Used Rheological Properties of Grease Systems:
Fluid Regulations, Sukys, D., Camino, C., Viscosity, Viscoelasticity and the Effect of
September 1994. Temperature, Kieke, M., Naé, H., December 1994.
New Alternative Options in Drum Specification Some Aspects of Tomorrow’s Greases, Dresel,
NLGI SPOKESMAN, APRIL 1995
W.H., Heckler, R.P., April 1994. Seven Commercial Greases, Dholakia, V.P., Klaus,
The Effect of Grease Composition on Grease E.E., Duda, J.L., May 1994.
Life Part Two of Factors Affecting Grease Life, Development of a Microoxidation Test for
Kawamura, Y., Shimizu, K., Takeuchi, K., Grease, Dholakia, V.P., Klaus, E.E., and Duda, J.L.,
Okamura, S., Kinoshita, S., Kinoshita, H., Komiya, April 1994.
H., Sakurai, T., Suzuki, M., Terai, S., Naka, M., Development of a New Method for Testing
Nagano, K., Nishimura, M., Hirano, O., and Automobile Electric Contact Grease, Terai, S.,
Hoshino, M., June 1994. September 1994.
Performance and Ecology — Two Aspects for A New Screening Test for Limited Slip Gear
Modern Greases, Roehrs, I., RoBrucker, T., March Lubricant Performance, Vettel, P., Lochte, M.,
1995. February 1995.
Practical Aspects of Grease Noise Testing, Ward,
Product Development C.E., Littlefield, C.E., August 1994.
A Comparative Study of Polyurea and Lithium Quantitative Analysis of Aluminum Complex
Complex Grease Thickeners, Root, J.C., December Greases by FTIR Spectroscopy, Krol, R., March 1995.
1994. Standardization of Tests for Grease Life and the
A New Generation High Performance Titanium Effect of Test Conditions, Kawamura, Y., Shimizu,
Complex Grease, Kumar, A., Sayanna, E., Verma, K., Takeuchi, K., Okamura, S., Kinoshita, S.,
A.S., Naithani, K.P., Rai, M.M., and Bhatnagar, Kinoshita, H., Komiya, H., Sakurai, T., Suzuki, M.,
A.K., April 1994. Terai, S., Naka, M., Nagano, K., Nishimura, M.,
The World’s First Fibrous Polyurea Grease, Hirano, O., and Hoshino, M., May 1994.
Root, J.C., February 1995. Vapor Pressure of Lubricants, Bessette, P.A.,
June 1994.
Additives
The Ashless Additive. Sulfur as a Key Element Environmental Issues
in EP Greases and in General Lubricants, Rohr, O., Natural Ester Biodegradable Fluids and
Sulfur: August 1994. Lubrication Trends for the Future - Part I:
Systematic Removal of Components Based on Used
Manufacture/Lubricating Grease Fluid Regulations, Sukys, D., Camino, C.,
Automatic Temperature Control System for the September 1994.
STRATCO Grease Contactor, Mita, M., Masters, New Alternative Options in Drum Specification
K.R., May 1994. Selection, Heffernan, J.P., January 1995.
Customer Driven to a New Grease Plant,
Trabert, G.R., Carlson, M., July 1994. Transportation
Grease Making in the 90’s A Comparison of A New Approach to Wheel/Rail Lubrication,
Commerical Grease Manufacturing Processes, Mulvihill, M.A., Witte, A.C., March 1995.
Witte, AC., Turner, D.A., June 1994. Technology and Lubricants of the 1995
Modified Montmorillonite Clays Used in the Domestic Automobiles, Fennema, R.L., January
Manufacture of Lubricating Greases, Ischuk, Y.L., 1995.
Umanskaya, O.I., October 1994.
Gear Lubricants
Bearings The Effects of Gear Lubricant Components on
Grease Lubrication of High-Speed Hybrid Oil Seal Compatibility, Richardson, R.C., Scinto,
Bearings, Wunsch, F., February 1995. P.R., September 1994.
Use of High Viscosity Base Oil Gels for Heavy
Testing/Lubricating Grease Duty Open Gear Drive Lubrication, Barrett, C.,
Assessment of Grease EP Performance and EP Bjel, I., August 1994.
Testing, Beret, S., November 1994. Worldwide Trends in Automotive Gear Oils,
Comparison of Grease Oxidation Tests with Sullivan, W., Bosch, H.W., July 1994.
VOLUME 59, NUMBER 1
a
7
*
=
‘ ©e e obonl ” - ’ . \ iY .
. o
te
2 s
3
.
» ,
6
. a
t
:
g ep
75
‘
:
ee
rs
e ‘
s
7 ;
é
Spe * ‘
—
‘
: :
er; e
a
~~ :
ees : ei os ‘ j .
*I °