National Fire Protection Association Report

63 Pages·2014·0.27 MB·English

National Fire Protection Association Report http://submittals.nfpa.org/TerraViewWeb/ContentFetcher?commentPara...
Committee Input No. 12-NFPA 2-2013 [ Global Input ]
Type your content here ...
Submitter Information Verification
Submitter Full Name:[ Not Specified ]
Organization: [ Not Specified ]
Street Address:
City:
State:
Zip:
Submittal Date: Tue Jun 04 13:38:03 EDT 2013
Committee Statement
Committee To conform to the NFPA Regulations Governing Committee Projects. A task group was formed to
Statement: update extract text and separate public input has been submitted on a Chapter by Chapter basis.
The focus of the submittals by the task group has been limited to extracts from NFPA 1, 55 and 400.
Extract text for other source documents will be addressed by the Staff Liaison along with public input
from the technical committee for discussion during the public input meeting. This public input
comment has been provided to document the need for additional updates to extract text where
necessary.
Response
Message:
Public Input No. 62-NFPA 2-2012 [Global Input]
1 of 11 1/27/2014 11:20 AM
National Fire Protection Association Report http://submittals.nfpa.org/TerraViewWeb/ContentFetcher?commentPara...
Committee Input No. 13-NFPA 2-2013 [ Global Input ]
Submitter Information Verification
Submitter Full Name:[ Not Specified ]
Organization: [ Not Specified ]
Street Address:
City:
State:
Zip:
Submittal Date: Tue Jun 04 13:54:26 EDT 2013
Committee Statement
Committee Review all extracted text to determine the appropriate source document for the extracted text.
Statement: Text should be extracted from the fundamental source document. Staff will review all extracts and
update appropriately for committee review.
Response
Message:
2 of 11 1/27/2014 11:20 AM
National Fire Protection Association Report http://submittals.nfpa.org/TerraViewWeb/ContentFetcher?commentPara...
Committee Input No. 150-NFPA 2-2013 [ Global Input ]
Type your content here ...
Submitter Information Verification
Submitter Full Name:[ Not Specified ]
Organization: [ Not Specified ]
Street Address:
City:
State:
Zip:
Submittal Date: Tue Jun 18 13:01:03 EDT 2013
Committee Statement
Committee The Technical Committee is getting up a task group to work with the NFPA 86 Technical
Statement: Committee to review Chapter 14 and the material that is extracted from NFPA 86
Response
Message:
3 of 11 1/27/2014 11:20 AM
National Fire Protection Association Report http://submittals.nfpa.org/TerraViewWeb/ContentFetcher?commentPara...
Committee Input No. 27-NFPA 2-2013 [ Global Input ]
Type your content here ...
Submitter Information Verification
Submitter Full Name:[ Not Specified ]
Organization: [ Not Specified ]
Street Address:
City:
State:
Zip:
Submittal Date: Wed Jun 05 10:44:59 EDT 2013
Committee Statement
Committee The technical committee is creating a task group to review Chapter 7 to address changes
Statement: resulting from the revised definition of bulk GH2 system in the most recent edition of NFPA 55.
This will result in changes to Chapter 7 and may result in changes to the next edition of NFPA 55.
Response
Message:
4 of 11 1/27/2014 11:20 AM
National Fire Protection Association Report http://submittals.nfpa.org/TerraViewWeb/ContentFetcher?commentPara...
Committee Input No. 5-NFPA 2-2013 [ Global Input ]
Replace, where appropriate, the use of the references to NFPA 101, with the "adopted building
code."
Submitter Information Verification
Submitter Full Name:[ Not Specified ]
Organization: [ Not Specified ]
Street Address:
City:
State:
Zip:
Submittal Date: Tue Jun 04 08:36:53 EDT 2013
Committee Statement
Committee Note: This public input appeared as Comment 2-2 (Log #CC17) which was held from the F10
Statement: ROC on Proposal 2-1. This would create consistency with the remainder of the document.
Response
Message:
Public Input No. 28-NFPA 2-2012 [Global Input]
5 of 11 1/27/2014 11:20 AM
National Fire Protection Association Report http://submittals.nfpa.org/TerraViewWeb/ContentFetcher?commentPara...
Committee Input No. 517-NFPA 2-2013 [ Global Input ]
The TC is planning a reorganization of Chapter 10 once the first revisions are balloted. See the
attached files for the proposed reorganization.
Supplemental Information
File Name Description
2_Harris_Submission_FWG_NFPA_2_Ch_10_reorgnized_table_rev1.G1357571926152.xls
2_Harris_Submission_FWG_NFPA_2_Ch_10_reorganized_rev2.G1357571902938.docx
Submitter Information Verification
Submitter Full Name:Susan Bershad
Organization: National Fire Protection Assoc
Street Address:
City:
State:
Zip:
Submittal Date: Mon Sep 09 10:53:19 EDT 2013
Committee Statement
Committee The TC is planning a reorganization of Chapter 10 once the first revisions are balloted. See
Statement: the attached files for the proposed reorganization.
Response
Message:
6 of 11 1/27/2014 11:20 AM
Old Section New Section Proposal Comment
10.3.1.3 10.2.2 Design and Construction of Containers, Cylinders, and Tanks.
10.3.1.3.1 10.2.2.1
10.3.1.3.2 10.2.2.2
10.3.1.3.3 10.2.2.3
10.3.1.3.4 10.2.2.4 Composite Container Cylinders and Tanks. (Reserved)
10.3.1.3.5 10.2.2.5 ASME Containers, Cylinders and Tanks
10.3.1.3.5.1 10.2.2.6
10.3.1.3.5.1 (A) 10.2.2.6.1
10.3.1.3.5.1 (B) 10.2.2.6.2
N/A 10.2.3 Hazard Analaysis New section heading
10.2.1.2 10.2.3.1
10.2.1.3 10.2.3.2
10.2.1.4 10.2.3.3
N/A 10.2.4 Leak and Fire Detection New section heading
10.3.1.19.1 10.2.4.1
10.3.1.19.1.1 10.2.4.1.1
10.3.1.19.1.2 10.2.4.1.2
10.3.1.19.1.3 10.2.3.1.3
10.3.1.19 10.2.4.2 Fire Protection New section heading
A portable fire extinguisher having a rating of not less than 20‐B:C shall 
be provided at the dispensing area in approved locations not more 
than 50 ft (15.2 m) away from the dispensing area. [52:9.15] Fire 
extinguishers shall be inspected and maintained according to NFPA 10, 
10.3.1.19 10.2.4.2.1 Standard for Portable Fire Extinguishers [52:9.15.1] Move text to suplementary paragraph
Moved to reflect the order of 
components as they appear in the list 
10.3.1.4 10.3.1.3 Pressure Relief Devices in section 10.3.1.1
10.3.1.4.1 10.3.1.3.1
10.3.1.4.1.5 10.3.1.3.2
10.3.1.4.1.3 10.3.1.3.3
10.3.1.4.1.4 10.3.1.3.4
10.3.1.4.1.1 10.3.1.3.5
10.3.1.4.1.2 10.3.1.3.6
Moved to reflect the order of 
components as they appear in the list 
10.3.1.5 10.3.1.4 Pressure Gauges in section 10.3.1.1
10.3.1.5.1 thru 10.3.1.5.2 Renumber accordingly
Moved to reflect the order of 
components as they appear in the list 
10.3.1.6 10.3.1.5 Pressure Regulators in section 10.3.1.1
10.3.1.6.1 and 10.3.1.6.2 Renumber accordingly
Moved to reflect the order of 
components as they appear in the list 
10.3.1.9 10.3.1.6 Valves in section 10.3.1.1
10.3.1.9.1 10.3.1.6.1
10.3.1.9.1.1 10.3.1.6.2
10.3.1.9.3 10.3.1.6.3
10.3.1.9.3.1 10.3.1.6.4
10.3.1.9.2 10.3.1.6.5
Moved to reflect the order of 
components as they appear in the list 
10.3.1.8 10.3.1.7 Hose and Hose Connections in section 10.3.1.1
Moved and renumbered to improve 
10.3.1.8.5.3 10.3.1.7.1 The hose shall be approved or listed for hydrogen service. [52:9.9.4] readibility of section
Hose and metallic hose shall be distinctly marked by the manufacturer, 
either by the manufacturer’s permanently attached tag or by distinct 
markings indicating the manufacturer’s name or trademark, applicable 
service identifier, design pressure, and flow direction. [52:5.10.4] Moved and renumbered to improve 
10.3.1.8.4 10.3.1.7.2 readibility of section
10.3.1.8.5.2 10.3.1.7.2.1
10.3.1.8.5 10.3.1.7.3
10.3.1.8.5 (1) 10.3.1.7.3 (1)
10.3.1.8.5 (2) 10.3.1.7.3 (2)
10.3.1.8.5 (3) 10.3.1.7.3 (3)
10.3.1.8.1 10.3.1.7.4
10.3.1.8.2 10.3.1.7.5
Moved to reflect the order of 
components as they appear in the list 
10.3.1.7 10.3.1.8 Fuel Lines and Piping Systems in section 10.3.1.1
10.3.1.7.3 10.3.1.8.1
10.3.1.7.1.1 10.3.1.8.2
10.3.1.7.1.2 10.3.1.8.3
10.3.1.7.2 10.3.1.8.4
10.3.1.7.1 10.3.1.8.5
10.3.1.7.5 10.3.1.8.6
10.3.1.7.4 10.3.1.8.7
10.3.1.7.4.1 10.3.1.8.8
10.3.1.7.4.1 (1) 10.3.1.8.8.1
10.3.1.7.4.1 (2) 10.3.1.8.8.2
Moved to reflect the order of 
components as they appear in the list 
10.3.1.15 10.3.1.9 Vehicle Fueling Connection in section 10.3.1.1
10.3.1.15.1 10.3.1.9.1
N/A 10.3.1.10 Compression and Gas Processing Systems
10.3.1.13 10.3.1.10.1
10.3.1.13.1 10.3.1.10.1.1
10.3.1.13.2 10.3.1.10.1.2
N/A 10.3.2 Installation and Testing New section heading
N/A 10.3.2.1 Venting New section heading
10.3.1.7.7 10.3.2.1.1
10.3.1.4.2 10.3.2.1.2 Installation of Pressure Relief Devices on Dispensing Systems
10.3.1.4.2.1 10.3.2.1.2.1
10.3.1.4.2.2 10.3.2.1.2.2
10.3.1.4.2.3 10.3.2.1.2.3
10.3.1.4.2.4 10.3.2.1.2.4
10.3.1.5.3 10.3.2.2 Installation of Pressure Gauges on Dispensing Systems
10.3.1.6.3 10.3.2.3 Installation of Pressure Regulators on Dispesning Systems
10.3.1.6.3.1 10.3.2.3.1
10.3.1.6.4   The regulator protection in 10.3.1.6.3.1  10.3.2.3.1shall be  change reference in addtion to 
10.3.1.6.4 10.3.2.3.2 permitted to be integral with the regulator. [52:9.7.2] chaning section
New section heading ‐ Note ‐ 
recommend the use of "Installation of 
N/A 10.3.2.4 Valves Valves"
10.3.1.9.1.2 10.3.2.4.1
New section heading  Note ‐ 
recommend the use of "Installation of 
N/A 10.3.2.5 Hoses and Hose Assemblies Hoses and Hose Assemblies"
10.3.1.8.3 10.3.2.5.1
10.3.18.5.1 10.3.2.5.2
10.3.1.11.2.2 10.3.2.5.3
10.3.1.11.2.3 10.3.2.5.4
10.3.1.11.2.3 (A) 10.3.2.5.4.1
10.3.1.11.2.3 (B) 10.3.2.5.4.2
10.3.1.7.6 10.3.2.6 Installation of Piping and Hoses on Dispensing Systems
10.3.1.7.6.1 10.3.2.6.1
10.3.1.7.6.9 10.3.2.6.2
10.3.1.7.6.8 10.3.2.6.3
10.3.1.7.6.7 10.3.2.6.4
10.3.1.7.6.2 10.3.2.6.5
10.3.1.7.6.3 10.3.2.6.6
10.3.1.7.6.4 10.3.2.6.7
10.3.1.7.6.5 10.3.2.6.8
10.3.1.7.6.6 10.3.2.6.9
10.3.1.16 10.3.2.7 Installation of Electrical Equipment
10.3.1.16.1 10.3.2.7.1
Table 10.3.1.16.1 Table 10.3.2.7.1
10.3.1.16.4 10.3.2.7.2
10.3.1.16.3 10.3.2.7.3
10.3.1.16.2 10.3.2.7.4
10.3.1.16.2.1 10.3.2.7.5
10.3.1.16.1.1 10.3.2.7.5.1
10.3.1.17.3 10.3.2.7.6
10.3.1.17.3.1 10.3.2.7.6.1
10.3.1.17.4 10.3.2.7.7
10.3.1.16.4.1 10.3.2.7.8
10.3.1.17 10.3.2.8 Stray or Impressed Currents and Bonding
10.3.1.17.1 10.3.2.8.1
10.3.1.17.2 10.3.2.8.2
10.3.1.12 10.3.2.9 Equipment Security and Vehicle Protection
10.3.1.10 10.3.2.10 System Testing
10.3.1.10.1 10.3.2.10.1
10.3.1.10.2 10.3.2.10.2
10.3.1.10.3 10.3.2.10.3
10.3.1.10.4 10.3.2.10.4
10.3.1.10.5 10.3.2.10.5
10.3.1.10.5.1 10.3.2.10.5.1
10.3.1.10.5.1 (A) 10.3.2.10.5.1 (A)
10.3.1.10.5.1 (B) 10.3.2.10.5.1 (B)