MPR User Guide PDF
Preview MPR User Guide
MPR USER GUIDE 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Alcatel-Lucent 5620 SERVICE AWARE MANAGER MPR USER GUIDE Alcatel-Lucent Proprietary This document contains proprietary information of Alcatel-Lucent and is not to be disclosed or used except in accordance with applicable agreements. Copyright 2014 © Alcatel-Lucent. All rights reserved. 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is subject to change without notice. Alcatel, Lucent, Alcatel-Lucent, the Alcatel-Lucent logo, lightRadio, and TiMetra are registered trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. Copyright 2014 Alcatel-Lucent. All rights reserved. Disclaimers Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design engineering, they must not be sold, licensed or otherwise distributed for use in any hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life-support machines, or weapons systems, in which the failure of products could lead directly to death, personal injury, or severe physical or environmental damage. The customer hereby agrees that the use, sale, license or other distribution of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the use, sale, license or other distribution of the products in such applications. This document may contain information regarding the use and installation of non-Alcatel-Lucent products. Please note that this information is provided as a courtesy to assist you. While Alcatel-Lucent tries to ensure that this information accurately reflects information provided by the supplier, please refer to the materials provided with any non-Alcatel-Lucent product and contact the supplier for confirmation. Alcatel-Lucent assumes no responsibility or liability for incorrect or incomplete information provided about non-Alcatel-Lucent products. However, this does not constitute a representation or warranty. The warranties provided for Alcatel-Lucent products, if any, are set forth in contractual documentation entered into by Alcatel-Lucent and its customers. This document was originally written in English. If there is any conflict or inconsistency between the English version and any other version of a document, the English version shall prevail. When printed by Alcatel-Lucent, this document is printed on recycled paper. 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Contents Getting started 1 — What’s new? 1-1 1.1 What’s new in 5620 SAM Release 12.0 for 9500MPR and 9500MPRe devices.............................................................................1-2 Deprecation notice...................................................................1-2 Maintenance releases................................................................1-2 What’s new in 5620 SAM Release 12.0 R7........................................1-2 What’s new in 5620 SAM Release 12.0 R5........................................1-3 What’s new in 5620 SAM Release 12.0 R2........................................1-4 What’s new in 5620 SAM Release 12.0 R1........................................1-4 2 — 9500 MPR/9500 MPRe overview 2-1 2.1 5620SAM management of 9500MPR/9500 MPRe devices.........................2-2 Supported device objects, auxiliary equipment, and service types..........2-2 Supported MSS types.................................................................2-3 IDUs and ODUs........................................................................2-3 9500MPR/9500 MPRe card support................................................2-6 Fan tray................................................................................2-6 9500MPR LAG objects...............................................................2-6 9500MPR services and service tunnel support ..................................2-6 9500MPR/9500 MPRe NEtO support...............................................2-7 XPIC ....................................................................................2-8 9500MPRe support...................................................................2-8 2.2 Workflow to manage 9500 MPR/9500MPRe devices...............................2-9 Alcatel-Lucent 5620 Service Aware Manager iii 5620 SAM MPR User Guide 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Contents 9500 MPR/9500 MPRe management 3 — 9500 MPR/9500 MPRe device commissioning and management 3-1 3.1 9500MPR/9500 MPRe device commissioning and management overview......3-2 9500MPR/9500 MPRe management...............................................3-2 9500MPR radio link discovery and management................................3-4 3.2 Workflow to commission 9500MPR/9500 MPRe devices..........................3-7 3.3 9500MPR/9500 MPRe device commissioning and management procedures ........................................................................3-7 Procedure 3-1 To commission a 9500MPR/9500 MPRe for 5620 SAM management....................................................................3-7 Procedure 3-2 To configure polling for 9500 MPR/9500MPRe devices..........................................................................3-10 Procedure 3-3 To enable 5620 SAM management of 9500MPR/9500 MPRe devices...............................................3-11 4 — 9500 MPR/9500 MPRe object configuration 4-1 4.1 9500MPR/9500 MPRe object configuration overview.............................4-2 4.2 Workflow to configure and manage 9500MPR/9500MPRe device objects.............................................................................4-2 4.3 9500MPR/9500 MPRe device object configuration procedures..................4-2 Procedure 4-1 To configure system settings on a 9500MPR..................4-2 Procedure 4-2 To resolve 9500 MPR MIB inconsistencies......................4-3 Procedure 4-3 To configure a scope of command role for NEtO access............................................................................4-3 Procedure 4-4 To start the 9500MPR/9500 MPRe external element manager from the 5620 SAM GUI..................................4-4 Procedure 4-5 To configure a DSCP value for in-band TMN interfaces on the 9500 MPR...................................................4-5 5 — 9500 MPR LAG object configuration 5-1 5.1 Working with 9500MPR LAG objects.................................................5-2 9500MPR LAG objects...............................................................5-2 5.2 Workflow to configure and manage 9500MPR LAG objects......................5-3 5.3 9500MPR LAG configuration procedures............................................5-4 Procedure 5-1 To create an L1 radio LAG, L2 radio LAG, or Ethernet LAG on a 9500MPR.................................................5-4 Procedure 5-2 To delete a 9500MPR LAG.......................................5-6 6 — 9500 MPR/9500 MPRe shelf object configuration 6-1 6.1 9500MPR/9500 MPRe shelf object configuration overview ......................6-2 6.2 Working with shelf objects on 9500 MPR/9500MPRe devices....................6-2 6.3 Working with card and card slot objects on 9500 MPR/9500MPRe devices.............................................................................6-2 9500MPR card support..............................................................6-3 6.4 Workflow to manage shelf objects on 9500 MPR/9500MPRe devices...........6-9 iv Alcatel-Lucent 5620 Service Aware Manager 5620 SAM MPR User Guide 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Contents 6.5 9500MPR/9500 MPRe shelf object configuration procedures....................6-9 Procedure 6-1 To migrate the 9500 MPRe connected to a 7705SAR from standalone mode to single NE mode.....................6-10 Procedure 6-2 To manage the 9500MPR/9500 MPRe running software........................................................................6-12 Procedure 6-3 To configure a 9500 MPR basic or advanced fan tray.......6-13 Procedure 6-4 To configure 9500 MPR card protection.......................6-14 Procedure 6-5 To remove 9500 MPR card protection.........................6-15 Procedure 6-6 To switch between a 9500 MPR in-service protected radio link and a standby protected radio link................6-15 Procedure 6-7 To configure MPT-HLS radio ....................................6-17 7 — 9500 MPR/9500 MPRe port object configuration 7-1 7.1 9500MPR/9500 MPRe port configuration overview................................7-2 IMA support ...........................................................................7-2 Combiner support....................................................................7-2 9500MPR Ethernet port QoS schemes ............................................7-3 7.2 Workflow to manage port objects on 9500 MPR/9500MPRe devices ...........7-4 7.3 Port configuration procedures........................................................7-4 Procedure 7-1 To configure 9500 MPR/9500MPRe Ethernet ports ..........7-5 Procedure 7-2 To configure 9500 MPR 2 × STM ports..........................7-6 Procedure 7-3 To configure 9500 MPR 1 × STM (Channelized) ports ........7-7 Procedure 7-4 To configure 9500 MPR E1 and DS1 ports......................7-9 Procedure 7-5 To configure 9500 MPR DS3 ports..............................7-10 Procedure 7-6 To configure 9500 MPR AUX alarm ports......................7-11 Procedure 7-7 To configure a 9500MPRe port.................................7-12 Procedure 7-8 To configure analog performance management on 9500MPR 1x radio modem ports............................................7-12 Procedure 7-9 To configure power level performance management on 9500MPR 1x radio modem ports .......................7-13 Procedure 7-10 To configure 9500MPR port segregation....................7-14 Procedure 7-11 To configure a 9500 MPR power source type...............7-15 Procedure 7-12 To configure synchronization on Ethernet ports...........7-16 Procedure 7-13 To add 9500 MPR port protection ............................7-17 Procedure 7-14 To remove 9500 MPR port protection........................7-18 Procedure 7-15 To configure a loopback test on a 9500 MPR DS1, ES1, STM, or 1 x radio modem port.........................................7-18 9500 MPR/9500 MPRe policy and service management 8 — 9500 MPR/9500 MPRe QoS policies 8-1 8.1 9500MPR/9500 MPRe QoS policies overview .......................................8-2 9500 ATM QoS policies...............................................................8-2 9500 NE QoS policies.................................................................8-2 9500 Radio Interface Queue Map policies........................................8-2 Alcatel-Lucent 5620 Service Aware Manager v 5620 SAM MPR User Guide 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Contents 8.2 Workflow to configure 9500MPR/9500MPRe QoS policies.......................8-3 8.3 9500MPR/9500 MPRe QoS policies procedures.....................................8-3 Procedure 8-1 To configure and distribute a 9500MPR ATM QoS policy.............................................................................8-3 Procedure 8-2 To configure and distribute a 9500 Radio Interface Queue Map policy ..............................................................8-4 Procedure 8-3 To configure and distribute a 9500 NE QoS policy ...........8-5 9 — 9500 MPR service management and service tunnels 9-1 9.1 9500 MPR service management overview ...........................................9-2 Supported service types.............................................................9-2 Complete transport service.........................................................9-5 9500MPR services support..........................................................9-5 9500MPR and 9500MPRe service provisioning considerations and constraints.......................................................................9-7 9.2 9500MPR service tunnel overview ...................................................9-9 9500MPR service tunnel (ERPS) support .........................................9-9 9.3 Ethernet (G.8032) rings...............................................................9-11 ERP topology.........................................................................9-11 9500MPR ERPS tail node support on Ethernet (G.8032) rings................9-11 Supported ERP service types......................................................9-14 9.4 Configuring service tunnels on 9500MPR devices.................................9-14 Procedure 9-1 To create an Ethernet radio ring element on a 9500 MPR .......................................................................9-14 9.5 Workflow to configure a composite service with VLAN service on the 9500MPR and VPLS on the 7210 SAS.........................................9-18 10 — 9500 MPR VLAN service management 10-1 10.1 9500MPR VLAN service management overview...................................10-2 Supported VLAN services types for 9500 MPR devices.........................10-2 VLAN groups and paths.............................................................10-2 10.2 Workflow to create VLAN services on 9500 MPR devices ........................10-3 10.3 VLAN service management procedures for 9500MPR devices ..................10-4 Procedure 10-1 To create a VLAN group........................................10-4 Procedure 10-2 To create a 9500 MPR VLAN path.............................10-5 Procedure 10-3 To create a 9500 MPR (dot1q) VLAN service................10-8 Procedure 10-4 To create a 9500 MPR (dot1ad) VLAN service ............ 10-12 Procedure 10-5 To create a CoS rate limiter per VLAN on a 9500 MPR ..................................................................... 10-18 Procedure 10-6 To discover 9500 MPR services.............................. 10-19 Procedure 10-7 To delete a VLAN group or group member................ 10-20 Procedure 10-8 To delete a 9500 MPR VLAN path........................... 10-21 11 — 9500 MPR VLL service management 11-1 11.1 9500MPR VLL service management overview.....................................11-2 Supported VLL services types for 9500 MPR devices...........................11-2 11.2 Workflow to create VLL services on 9500 MPR devices ..........................11-2 vi Alcatel-Lucent 5620 Service Aware Manager 5620 SAM MPR User Guide 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Contents 11.3 VLL service management procedures for 9500MPR devices ....................11-3 Procedure 11-1 To create a VLL Apipe service on the 9500MPR (ETSI only)......................................................................11-3 Procedure 11-2 To create a VLL Cpipe service on a 9500 MPR..............11-6 Procedure 11-3 To create a single site VLL Cpipe service on 9500MPR connected to an MSS1c lightweight GNE......................11-9 Procedure 11-4 To discover a single-site Cpipe service on 9500MPR connected to an MSS-1c lightweight GNE................................ 11-11 Procedure 11-5 To fix a failed cross-connection in a 9500MPR Cpipe or a hop-based VLAN service....................................... 11-11 Procedure 11-6 To configure a GNE site on a VLL service ................. 11-12 Appendices A. 9500 MPR SAM-E license functionality A-1 A.1 9500MPR SAM-E license functionality ...............................................A-2 Alcatel-Lucent 5620 Service Aware Manager vii 5620 SAM MPR User Guide 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Contents viii Alcatel-Lucent 5620 Service Aware Manager 5620 SAM MPR User Guide 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Getting started 1 — What’s new? 2 — 9500 MPR/9500 MPRe overview Alcatel-Lucent 5620 Service Aware Manager 5620 SAM MPR User Guide 12.0 R7 | December 2014 | 3HE 08850 AAAG TQZZA Edition 01 Alcatel-Lucent 5620 Service Aware Manager 5620 SAM MPR User Guide
Description:The list of books you might like
