Table Of Content

Military/Aerospace Contents May we suggest you contact Series Prefix Description Page Rack and Panel Connectors 2-114 the ITT Cannon technical BKAD/E/F ARINC 600 2-20 SGA 21-24 sales office nearest you for DPXNE/NA MIL-C-81659 25-40 DPX Series ARINC 404 41-74 DPXA/DPXB/DPX*MA/DPX*ME (How to Order) 42 immediate assistance with DPX2/DPX2MA/DPX2ME (How to Order) 42 DPX3/DPX3MA/DPX3ME/DPX4/DPX4MA/DPX4ME (How to Order) 43 technical questions, order DPK Series MIL-C-83733 75-91 DPA Series 92-95 placement or simply to DPGM/DPJM/DPJMB Series 96-102 DPD/DPDMA/DPD2/DPD2MA Series 103-114 discuss your next project. Circular Connectors 115-230 KJL/KJ/KJA MIL-C-38999 Series I, II, and III 115-139 KPT/KPSE MIL-C-26482, Series 1 140-156 PV MIL-C-26482, Series 2 157-166 MS-E/F/R/ER MIL-C-5015 167-187 MS/CV345* MIL-C-5015 Rear Release 188-195 MR Waterproof 196-198 CA-A MIL-C-5015 Type 199-201 MS-K, CA-KE, FRF/FVR/FRA/FVA Firewall Connectors 202-217 KFS MIL-C-28840 218-223 CA-B, CA-COM, CGE Bayonet Coupling 224-230 Microminiature Connectors 231-295 • MICRO.050" Contact Spacing 231-276 MDM Micro-D ® Metal Shell 232-239 Connector Saver 239 MDM-PCB Printed Circuit Board 242-245 MDM-C/P Coaxial/Power 246 MD Micro-D Plastic Shell 247-250, 255-257 MDB-PCB Printed Circuit Board 251-252 MDB/Coaxial Coaxial 253-254 MJS Microminiature Center Jackscrew 258-262 MICRO-K Microminiature Circular 263 MIK Plastic Shell - Screw Coupling 264 MIKM Metal Shell - Screw Coupling 265 MIKQ Metal Shell - Quick Disconnect 265-266 MIKQP Plastic Shell - Quick Disconnect 267 MT Microminiature Strip .100"/.075" 268-271 MEB/MEBL Microminiature Edgeboard 272-276 • CENTI .075" Contact Spacing 277-290 2D Double Density D 278-282 2DD Environmental Double Density D 283-285 CDL Centi-D Loc 286 CTA Strip Connectors .100"/.075' 287-290 • NANO .025" Contact Spacing 291-295 NT Strip Connectors 292 NDM NANO-D Metal Shell 293 NJS Center Jackscrew 294-295 Fiber Optic Connectors 296-303 Filter Connectors 304-326 Special Application Connectors 327-331 Hermetic Connectors 327-328 Battery Connectors 329-331 D Subminiature Connectors 332-385 Standard MIL-Spec D 331-343 Combo D ® 344-357 Environmental Products 358-366 Accessories 367-385 Reference 386-392 Contacts, Crimp-MIL-C-39029 386 Index 387-392 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 1 ARINC 600 BKAD/E/F Low insertion force contacts. Both environmental and non- environmental versions. Polarizing posts that are removable from the mating face. Field replaceable inserts for size 22 and power contacts. Up to 800 size 22 contacts in one connector. Crimp, coax, power, printed circuit and wire wrappable post style contacts. Uses standard DPX crimp, insertion/extraction tooling. Waveguide connections available. BKAD/E BKAF Rear Release/Rear Removable Front Release/Front Removable Size 12, 16, 20, 22 Crimp Contacts Size 22 Solder Tail and Wrap Post Contacts BKAD/E connectors represent a major milestones in This new connector is totally intermateable and presenting a new rack and panel connector for intermountable with ARINC 600 connectors now in support of the air transportation market. the field. Several important design concerns have been ad- The BKAF permits the user to easily replace a dressed and solved in this new series. High mating contact in case of problems, rather than disas- forces of pluggable modules in a rack have been semble the entire connector--it is available with reduced by approximately two-thirds. size 22 contacts in wrap post or solder-tail ver- sions. The system maintains the advantages of low The low insertion force contacts are also inter- insertion force technology incorporated in all ARINC changeable with the contacts used in the DPX 600 connectors. series and permit retrofit of existing equipment. Pos-Aline Connector Construction Feature In the ARINC 600 connector series, Size 22 con- The result is that the complement of contacts for tacts are the only size that utilize this design the plug connectors will consist of pin contacts for feature. The hooded socket extends from its in- size 22 and socket contacts for all others. The sulator while the pin contacts are shrouded by its receptacle contacts will be just the reverse, socket front insulator. contact for size 22 and pin contacts for the All other contacts used in this series employ stan- balance. dard contact design. Material Specifications BKAD BKAE BKAF Specifications Material Aluminum alloy Aluminum alloy Aluminum alloy QQ A-591/A380 Shell & Waveguide Alodine Alodine Alodine MIL-C-5541 Finish 1200 1200 1200 Insulator Material Thermoset Thermoset Thermoset N/A Material Copper alloy Copper alloy Copper alloy QQ-C-533 Contacts Finish Gold over Nickel Gold over Nickel Gold over Nickel MIL-G-45204 Termination Crimp Crimp P.C./Wrap Post N/A Grommets/Seals Material N/A Silicone-based Elastomer N/A N/A O-Ring Material N/A Silicone-based Elastomer N/A N/A Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 2 ARINC 600 BKAD/E/F How to Order BKA D 2 A234 M * 3 00 01 * F0 CONNECTOR SERIES CLASS SHELL SIZE CONNECTOR LAYOUT DESCRIPTION SIZE 1 COAX INSERT MODIFIER BOEING COAX MODIFIER SHELL STYLE CONNECTOR MOUNTING MODIFIER POLARIZING POSITION MODIFIER (Contact, Finish, Material) * = For Polarizing Position greater then 99, add third digit. CONNECTOR SERIES BOEING COAX MODIFIER BKA (Per ARINC 600) BCooeainxg ITTC ITTC Coax Contacts Supplied CLASS Code Code Plug Connector Receptacle Connector D - Non-environmental (rear release, crimp AA Blank No Coax Supplied No Coax Supplied contacts) AB B 349-0013-000 349-0014-000 E - Environmental (rear release, crimp con- AC C 349-0015-000 349-0016-000 tacts) AD D 349-0013-000 349-0014-000 349-0017-000 349-0002-000 F - Non-environmental (front release, solder AE E 349-0015-000 349-0016-000 and wrap post #22 contact, rear release 349-0018-000 349-0004-000 all others) AF F 349-0015-000 349-0016-000 349-0017-000 349-0002-000 C - Same as E, except uses BKAD shells, and Less 0 rings on plug side. SHELL STYLE S - Environmental (0-ring is used to seal 3 - Plug (rack side) between connector shell and insulators) 4 - Receptacle (box side) with rear release, crimp contacts. T - Non-environmental connector using fil- CONNECTOR MOUNTING MODIFIER tered contacts (reference Cannon Phoe- 00 - Standard design, .148 dia. holes nix) 01 - With #6-32 ESNA (#12 NCFMA2-62) clinch nuts (see chart) SHELL SIZE 1 - Max. contact capacity - 125 Connector Number of Clinch Nuts 2 - Max. contact capacity - 400 Size Plug Receptacle 1 4 4 3 - Max. contact capacity - 800 2 4 6 CONNECTOR LAYOUT DESCRIPTION 3 8 10 (See page 4) 02 - Size 1 receptacle only - less 3 printed circuit board mounting lugs SIZE 1 COAX INSERT MODIFIER 03 - With #4-40 ESNA (#22 NCFMA2-40) clinch M - Connector contains modified 71W1 or nuts (see chart) 2W2 insert (four MTG screw hole loca- 08 - Size 2 and 3 plug and receptacle only - with tions and coaxial contact used in this #4-40 ESNA (#22 NCFMA2-40) clinch nuts insert are interchangeable between dif- (all mounting holes) ferent manufacturers 09 - Size 2 and 3 plug and receptacle only - with NOTE: A dash must be inserted whenever code does not apply. #6-32 ESNA (#12 NCFMA2-62) clinch nuts (all mounting holes) 16 - Same as - 00 mounting modification except with nickel finished shells .0008 - .0012 thick with EMI grounding spring for plug shells and supplied with non-environmental inserts. 17 - Same as - 00 mounting modification except with nickel finished shells .0008 - .0012 thick with EMI grounding spring for plug shells and supplied with environmental inserts not potted into shell. 23 - With floating eyelets (.048 min. radial float) 4 corner holes per connector. Consult factory if other modifications are required Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 3 ARINC 600 BK AD/E/F How to Order (Continued) CONNECTOR LAYOUT DESCRIPTION Note: All layouts with "OPEN' insert cavity are not supplied with an insulator. If a Blank insert is required please consult factory. Three Digit Number Contained within the Shell Layout Indicates Total Number of Contacts Available (including Waveguide) Connector Shell Shell Cavity Identification Ref. ARINC Connector Shell Shell Cavity Identification Ref. ARINC Layout Size A B C D E F Characteristic Layout Size A B C D E F Characteristic -005 1 OPEN OPEN 5W2 -T173 2 150 10T10 13W2 -060 1 OPEN 60 OPEN 234 2 150 71W1 13W2 709 A060 1 60 OPEN OPEN A234 2 71W1 150 13W2 727 -065 1 OPEN 60 5W2 -246 2 120T2 120T2 6T6 A065 1 60 Open 5W2 -248 2 121 121 6T6 -120 1 60 60 OPEN 250 2 OPEN 150 100 -125 1 60 60 5W2 250A 2 150 BLANK 100 -013 2 OPEN OPEN 13W2 -251 2 Waveguide 150 100 -017 2 2W2 2W2 13W2 -300 2 150 150 OPEN -071 2 OPEN 71W1 OPEN -306 2 150 150 6T6 A071 2 71W1 OPEN OPEN -313 2 150 150 13W2 -085 2 Waveguide 71W1 13W2 -370 2 150 120T2 100 A085 2 71W1 Waveguide 13W2 -400 2 150 150 100 86M 2 2W2 71W1A 13W2 -021 3 4W4 4W4 13W2 BLANK OPEN OPEN -093 2 4W4 4W4 85 -026 3 OPEN OPEN 13W2 OPEN OPEN 13W2 -100 2 OPEN OPEN 100 -113 3 OPEN OPEN 100 OPEN OPEN 13W2 -137 2 121 10T10 6T6 -A113 3 OPEN OPEN 13W2 OPEN OPEN 100 -T141 2 120T2 10T10 13W2 -114 3 4W4 4W4 4W4 4W4 13W2 85 -142 2 71W1 71W1 OPEN -284 3 71W1 71W1 OPEN 71W1 71W1 OPEN -155 2 71W1 71W1 13W2 -310 3 71W1 71W1 13W2 71W1 71W1 13W2 155M 2 71W1A 71W1A 13W2 -330M 3 2W1 2W2 13W2 150 150 13W2 V155M 2 71W1B 71W1A 13W2 -A330M 3 150 150 13W2 2W2 2W2 13W2 158M 2 2W2 71W1A 85 -496 3 121 121 121 121 6T6 6T6 -A158M 2 2W2 71W1B 85 -600 3 150 150 OPEN 150 150 OPEN -163 2 OPEN 150 13W2 -626 3 150 150 13W2 150 150 13W2 A163 2 150 OPEN 13W2 -713 3 150 150 100 150 150 13W2 -164 2 150 Waveguide 13W2 A713 3 150 150 13W2 150 150 100 A164 2 Waveguide 150 13W2 708 -734 3 150 150 100 150 150 3W 165M 2 150 2W2 13W2 -764 3 150 150 64 150 150 100 -A165M 2 2W2 150 13W2 -800 3 150 150 100 150 150 100 -167 2 4W4 150 13W2 -269M 3 2W2 2W2 13W2 2W2 150 100 732 173M 2 2W2 71W1B 100 271C 3 4W4 4W4 13W2 BLANK 150 100 271M 3 2W2 2W2 13W2 4W4 150 100 -326 3 OPEN 150 13W2 OPEN 150 13W2 NOTE. ANY OTHER COMBINATION OF INSERTS WITHIN A SPECIFIC SHELL IS AVAILABLE UPON REQUEST Layout included in the following ARINC configurations 702, 710, 711, 712, 714, 715, 716, 723. Layout included in the following ARINC configurations 707, 718 & 730. Layout included in the following ARINC configurations 701, 702, 703, 704, 705, 706, 724, 725. Layout included in the following ARINC configurations 701, 717, 726, 729. POLARIZING POSITION 01 thru 99 (per ARINC 600) Blank-Polarizing posts or keys not installed but supplied with connector MODIFIER (Contact, Finish, Material) Blank - Rear release, crimp, signal and power SC - Front release .025(0.63) D. x .375 WC - Front release .025(0.63) Sq. x 500 contacts supplied with connector (9.53) solder post and crimp, rear re- (12.7) (3 wraps) wrap post and crimp, (when applicable) lease power contacts (when applica- rear release power contacts (when ap- FO - Contacts not supplied with connector ble) supplied with connector plicable) supplied with connector (FO not stamped on connector) SD - Front release .025(0.63) D. x .500 WD - Front release .025 (0.64) Sq. x 641 FOO - Less contacts and waveguide (FOO not (12.7) solder post and crimp, rear re- (16.28) (3 wraps) wrap post and stamped on connector) lease power contacts (when applica- crimp, rear release power contacts SA - Front release .025(0.63) D. x .150 ble) supplied with connector (when applicable) supplied with con- (3.81) solder post and crimp, rear re- WA - Front release .025(0.63) Sq. x .250 nector lease power contacts (when applica- (6.35) (1 wrap) wrap post and crimp, NOTE: COAXIAL CONTACTS TO BE ORDERED SEPARATELY ble) supplied with connector rear release power contacts (when ap- SB - Front release .025(0.63) D. x .250 plicable) supplied with connector (6.35) solder post and crimp, rear re- WB - Front release .025(0.63 Sq. x .375 lease power contacts (when applica- (9.53) (2 wraps) wrap post and crimp, ble) supplied with connector rear relase power contacts (when ap- plicable) supplied with connector Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 4 ARINC 600 BKAD/E/F Shell Dimensions - Size 1 Plug .205 (5.21)* 1.B40K2A E(3 5S.E6R1)IMESAX 11..011900 ((2287..1699)) .195 (4.95) .130 (3.30) .120 (3.05) 1.195 (30.35)MAX .655 (16.64) .385 (9.78) MAX .645 (16.38) BKAD SERIES .148 +_ .003 (3.76 +_ 0.08)DIA 1.150(29.21)MIN 1.102 (27.99) MAX 4 PLCS MTG HOLES .653 (16.59) .647 (16.43) .55..445655 ((113388..5861)) .1.12055 ( (32.1.687))* A ..118606 ((44..5272))D A 4 PL 6.995 MAX (177.67) 33..882155 ((9976..1960)) .1.13155 ((32..4932))* B B 66..335455 ((116611..4126)) (167M.85I9.N001) ..1023004( .R R7P 6 MLM)AAXX (3.05) 6.(510605 .M10A)X 66..664259 ((116688..7388)) (166.315.337) 4 PL .6(.156155. 4M8I)N 22..005499 ((5522..3004)) (166.314.271) 1.313 (33.35) 1.303 (33.10) C .030 (.76)R .620MIN .479 (12.17) C MAX 4 PL .608 MAX (15.75) .469 (11.91) .250 (15.44) (6.35) MAX .135 (3.43) .830 (21.08) .125 (3.18) .188 (4.78) .820 (20.83) ..557655 ((1144..6305)) 1.1B9K8A (D3 0S.4E3R)I EMSAX .184 (4.67) 33..8755 ((99..7582)) .191 (4.85) .705 (17.91) BKAE SERIES 189 (4.80) .695 (17.65) 1.550 (39.37) MAX 3 PL Retainer Plate Size 1 Plug Panel Cutout * This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. For further information, refer to ARINC 600 specification or consult factory. Receptacle BKAE SERIES 1.531 (38.89) MAX .2.10955 ( (54.2.915))* B1K.A22D1/B (K31A.F0 1S) EMRAIEXS 1.010 (25.65) .130 (3.30) .990 (25.15) .240 (6.10)MAX .191 (4.85) 2 PL .120 (3.05) .655 (16.64) .189 (4.80) .125 (3.18)* .645 (16.38) .105 (2.67) .148 +_ .003 (3.76 +_ 0.08)DIA .030 R 4 PLCS MTG HOLES (.76) MAX 2 PL 5.465 (138.81) A A 5.455 (138.56) 7.455 MAX .1.13155 ((32..4932))* B (189.36) 66..335455 ((116611..4126)) (167.847.500) 3.825 (97.16) MIN 3.815 (96.90) 6.627 (168.33) 6.353 6.607 (167.82) (161.37) 6.347 2.059 (52.30) B (161.21) 2.049 (52.04) .287 R (7.29) MAX 4 PL 11..331033 ((3333..3150)) C (.62.4100) .120 R (3.05) MAX MAX 4 PL C .180 (4.57) .166 (4.22)D .810 (20.57) ..113255 ((33..4138)) B1K.A31D7/B (K33A.F4 5S) EMRAIEXS ..118884 ((44..7687)) 33..6555 ((99..2072)) (1.665.453 9P)L .800 (20.32) .575 (14.60) BKAE SERIES .647 .565 (14.35) 1.670 (42.42) .930 (23.62) MIN (16.43) .705 (17.91) .695 (17.65) Retainer Plate Size 1 Receptacle Panel Cutout *This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. For further information, refer to ARINC 600 specification or consult factory. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 5 ARINC 600 BKAD/E/F Shell Dimensions - Size 2 Plug 1.810 (45.97) 1.790 (45.47) 1.431 (36.35) BKAE SERIES 1.421 (36.09) 1.402 (35.61) MAX .655 (16.64) .130 (3.30) 1.195 MAX .645 (16.38) .120 (3.05) (30.35) BKAD SERIES .148 +_ 003 (3.76 +_ 0.08) DIA 260 (6 60)* 1.102 (27.99) MAX 10 PLCS MTG HOLES 653 (16.59) 250 (6 35) 191 (4.85) 647 (16.43)030 (.76) R .070 (1.78)* 189 (4.80) MAX 4 PL .050 (1.27) 3PL A 5.355 (136.02) A 030 R 5.345 (135.76) (.76) 66..336400 ((116611..5044)) M4 APXL B 3 770 (95.76) 111355 ((23..9423))* B 6 (919757 .M67A)X 6.(510605 .M10A)X 6.645 (168.78) (1666..33154.3377) 6(.156155. 4M8I)N 3 760 (95.50) 6.629 (168.38) 161.21 6.890 (175.01) 120 R MIN (3.05) 2 004 (50.90) MAX 1 994 (50.65) 4 PL 11 225488 ((3311..9750)) C .6(1250. 7M5I)N 22..113255 ((5543..2938)) C (.411.685607)D .608 MAX (4.22) (15.44) 8 PL 168 (4.27) 1.429 ..886555 ((2211..9772)) 11 441105558 (((33455.0..96149))) B1B11.KK15AA958ED0 (S(S33EE09.RR.43II37EE))S S MMAAXX 118884((44..7687)) ((9933..87755582)) 1.(8((413356.660.49.. 231M9304)I))N 25(60. 3M5A)X Retainer Plate Size 2 Plug Panel Cutout * This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. For further information, refer to ARINC 600 specification or consult factory. Receptacle B1.K5A31E (S3E8.R8I9E)S MAX 11..871900 ((4455..9477)) 1.431 (36.35) B1.K2A21D /(B3K1.A0F1 )SMEARXIES 1.421 (36.09) 1.530 .655 (16.64) (38.86) 130 (3.30 .645 (16.38) 191 (4.85) MIN .120 (3.05) 189 (4.80) 260 (6.60)* .148 .003 (3.76 +_ 0.08) DIA. 2 PL 250 (6.35) 10 PLCS MTG HOLES .070 (1.78)* .050 (1.27) 240 (6.10) 030 R MAX (76) A MAX 5.335 (136.02) A 6.353 2 PL 5.345 (135.76) .135 (3.43)* B 6.(917757 .M16A)X B 66..336400 ((116611..5044 (167M.84I7.N500) ((11666.3114..32771)) ((1133..6644..22319304)) 1((..44011...2 8652P60672L0))D .115 (2.92) 3 PL (6.60) 3.770 (95.76) .230 3.760 (95.50) (5.84) 6.627 (168.33) 2 PL 6.607 (167.82) 21..090944 ((5500..9605)) C 2.133 .(132.005 R) 2.780 (54.18) MAX 11..225488 ((3311..9750)) C 22..113255 ((5543..2938)) (7M0A.6X1) (25.52.0808) (25.41.2073) 4 PL MIN .287 R (7.29) MAX 8 PL BKAD/BKAF SERIES .653 (16.59) .865 (21.97) ..116588 ((44..2071)) BKA1E.3 S17E R(3IE3.S45) ..118884 ((44..7687)) .365 (9.27).24(60. 1M0A)X .6427 P(1L6C.43) .855 (21.72) 1.415 (35.94) 1.670 (42.42) .355 (9.02) 1.405 (35.69) Retainer Plate Size 2 Receptacle Panel Cutout *This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. For further information, refer to ARINC 600 specification or consult factory. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 6 ARINC 600 BKAD/E/F Shell Dimensions - Size 3 Plug 3.275 (83.18) 3.245 (82.42) BKAE SERIES 1.402 (35.61) MAX 2.891 (73.43) 2.881 (73.18) 1.1(2590. 2M1A)X 11..995455 ((4499..6460)) .260 (6.60)* .130 (3.50) BKAD SERIES .655 (16.64) 3.310 MIN .250 (6.35) .120 (3.05) 1.102 (27.99) MAX .645 (16.38) .148 +_ .003 DIA. 1.953 (84.07) (3.76 +_ 0.08) (49.61) .030 (.76)R .070 (1.78)* 14 PLCS MTG HOLES (14.99.4475) MAX 4 PL .060 (1.52) 5.355 (136.02) 5.345 (135.76) .030 R MAX (.76) 4 PL 6.355 (161.42) 6.353 .135 (3.43)* 6.345 (161.16) (161.37) .120 R MAX .115 (2.92) 6.500 6.347 (3.05) (1M65A.X10) 6.645 (168.78) (161.21) 4 P6L.515 MIN 6.629 (168.38) (165.48) 6.995 MAX (177.67) .590 MAX 2.004 (50.90) (14.99) 1.994 (50.65) .385 11..225488 ((3311..9750)) 6(2105 .M75IN) 22..113255 ((5543..2938)) ((.9.39.775582)) 3.770 (95.76) .180 3.760 (95.50) (4..15676) D .250 ..889700 ((2222..6110)) 1.1.6588 ((44..2071)) 11..225422 ((3311..8505)) 1.1B9K8A (D30 S.4E3R) IMESAX. ..118884 ((44..7687)) 1(42. 2P2L)(1..(M666654..A53379X5)) (.272.3.88.838389) ..1198319 P((44L..8850)) 1.440 (36.58) BKAE SERIES (16.43) (73.23) 1.430 (36.32) 1.550 (39.37) MAX 2.712 (68.88) 2.702 (68.63) 2.875 (73.02) 2.865 (72.77) Retainer Plate Size 3 Plug Panel Cutout * This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity. For furter information, refer to ARINC 600 specification or consult factory. Receptacle 3.275 (83.18) 3.245 (82.42) 2.891 (73.43) BKAE SERIES 2.881 (73.18) 1.531 (38.89) MAX 1.955 (49.66 BKAD/BKAF SERIES 1.945 (49.40) 1.221 (31.01)MAX 3.000 (76.20) MIN ..226500 ((66..6305))* ..113200 ((33..3005)) ..665455 ((1166..6348)) .(11344. 78P6 L+ _+C_ . S000 .M038 TD)GIA H.OLES ..1198319 P((44L..8850)) 22..888893 ((7733..3283)) 3 PL .(278.279 R) 8M PALX .240 MAX 5.355 (136.02) .070 (1.78)* (6.10) 5.345 (135.76) .060 (1.52) .030 R MAX (.76) 6.355 (161.42) 2 PL 6.870 6.345 (161.16) .120 R MAX (174.50) (3.05) .960 MIN 4.PL (24.38) .135 (3.43)* .930 .115 (2.92) 66..662077 ((116687..3832)) ..118606 ((44..5272)) D (223 P.6L2) 6.975 MAX 14 PL (177.16) 2.004 (50.90) 1.994 (501..6255)8 (31.95) 22..113255 ((5543..2938)) (27M.07A.86X01) 2.20 1.248 (31.70) (25.41.3138)(5M5.I8N8) 2.127 3.770 (95.76) (54.03) 3.760 (95.50) .188 (4.78) ..887500 ((2221..1509)) 1.1.6588 ((44..2071)) 11..225422 ((3311..8505)) 1.B6BK17K.0A3A D1(E47/ B2S (.K3E4A32R. F4I)EM 5SS)AEMXRAIXES .184 (4.67) ((..9933..65205572)) (M.62.A41X00.) (49.116..199)54 237 PL (16(.15..666954.)4 3723 )PL 1.440 (36.58) (49.45) 1.430 (36.32) 2.712 (68.88) 2.702 (68.63) 2.875 (73.02) 2.865 (72.77) Retainer Plate Size 3 Plug Panel Cutout * This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity. For furter information, refer to ARINC 600 specification or consult factory. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 7 ARINC 600 BKAD/E/F Contact Arrangements - Shell Size 1 BKAD/BKAE (Plug Rear face shown) BKAF - Available Receptacle Shell Only (Front Release) Shell Cavity Shell Cavity Shell Cavity Shell Cavity A or B C A or B C A B C B C D B C D 1 2 2 2 2 2 3 3 3 3 3 4 4 4 4 45 56 56 1 A B C D 56 56 1 6 7 7 1 1 7 7 7 1T 1890 1890 2 3 2 234 1890 1890 3 2 11 11 4 5 11 11 4 12 12 3 6 12 12 2T 13 13 7 13 13 14 14 8 14 14 15 15 4 5 9 15 15 5 B C D 10 B C D 30T2 60 4 5W2 40 60 5W2 28 #22 60 #22 4 #12 1 #12 40 #22 60 #22 1 #12 2 #8 TWINAX/COAX 2 #16 2 #16 (#8 Grounded to 2 #5 COAX 2 #5 COAX Shell) REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE REAR REMOVAL CONTACTS ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS (For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory) Contact Arrangements - Shell Sizes 2 and 3 BKAD/BKAE (Plug Rear face shown) Shell Cavity C or F 1 2 1 4 3 2 1 1 5 6 2 3 2 3 6 5 7 8 8 7 4 5 4 10 9 195 1240 11 6 5 6 21 22 13 12 23 24 3 4 6** 6T6** 13W2 24T4** 6 #8 6 #8 4 #20, 4 #12, 3 #16 20 #20, 4 #8 (Metallic Insert) 2 #5 COAX 1 6 A B C D E F G H J K B C D E F G H J K B C D E F G H J K 7 12 1 2 2 1 1 2 3 3 2 2 13 18 3 4 4 3 3 19 24 4 5 5 4 4 5 6 6 5 5 25 29 51 52 53 54 55 7 7 6 6 8 8 7 7 30 34 56 57 58 59 B C D E F G H J K 8 8 9 9 1 2 3 4 5 10 B C D E F G H J K 10 34** 59** 85 100 24 #20, 10 #18 50 #22, 5 #16, 4 #12 80 #22, 4 #20, 1 #16 100 #22 **Pending ARINC release. NOTE: In layouts using #22 contacts mixed with any other contact size (20HD, 16, 12), the size #22 contact type (pin or socket) determines the insulator as a pin insert or a socket insert. REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE, REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS (For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 8 ARINC 600 BKAD/E/F Contact Arrangements - Shell Sizes 2 and 3 BKAD/BKAE (Plug Rear face shown) Shell Cavity A,B,D,E 2W2 4W4 10T10** 24** 2 #1 COAX 4 Modified 10 #8 TRIAX/COAX 24 #12 #1 COAX (#8 Grounded to Shell) (Metallic Insert) (Metallic Insert) 49T2** 60** 71W1 71W1B 47 #20 60 #20 70 #22 70 #22 2 #8 1 #1 COAX 1 #1 COAX 110** 150 120T2 ** 121** 100 #22 150 #22 118 #22 110 #22 5 #12 & 5 #20 2 #8 TWINAX/COAX 5 #16 (#8 Grounded to Shell) 6 #20 ** Pending ARINC release. REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE. REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS (For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 9 ARINC 600 BKAD/E/F Contact Arrangements - Shell Sizes 2 and 3 BKAF - Available Receptacle Shell ONLY (Front Release) SHELL CAVITY A, B, D, E, 71W1 71W1B 10T10** 121F** 70 #22 70 #22 10 #8 110 #22 6 #20 5 #16 150 150 #22 ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS BKAF - Available Receptacle Shell ONLY (Front Release) SHELL CAVITY C, F 6T6** 13W2 100 6 #8 4 #20 100 #22 3 #16 4 #12 2 #5 COAX ** Pending ARINC release. NOTE #22 CONTACTS ARE SOCKETS, 20HD,16, 12 ARE PIN CONTACTS. ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE, FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS (For Contacts Cavity Location and Contact Cavity Identification refer to ARINC 600 or Consult Factory) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 10

Description:
sales office nearest you for immediate Waveguide connections available365. (9.27) .355. (9.02) .240. (6.10). MAX. 1.953. (49.61) 2 PL. 1.947.
ebook img

Military/Aerospace Contents PDF

386 Pages·2003·8.29 MB·English
by  
Save to my drive
Quick download
Download
Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Military/Aerospace Contents

Military/Aerospace Contents May we suggest you contact Series Prefix Description Page Rack and Panel Connectors 2-114 the ITT Cannon technical BKAD/E/F ARINC 600 2-20 SGA 21-24 sales office nearest you for DPXNE/NA MIL-C-81659 25-40 DPX Series ARINC 404 41-74 DPXA/DPXB/DPX*MA/DPX*ME (How to Order) 42 immediate assistance with DPX2/DPX2MA/DPX2ME (How to Order) 42 DPX3/DPX3MA/DPX3ME/DPX4/DPX4MA/DPX4ME (How to Order) 43 technical questions, order DPK Series MIL-C-83733 75-91 DPA Series 92-95 placement or simply to DPGM/DPJM/DPJMB Series 96-102 DPD/DPDMA/DPD2/DPD2MA Series 103-114 discuss your next project. Circular Connectors 115-230 KJL/KJ/KJA MIL-C-38999 Series I, II, and III 115-139 KPT/KPSE MIL-C-26482, Series 1 140-156 PV MIL-C-26482, Series 2 157-166 MS-E/F/R/ER MIL-C-5015 167-187 MS/CV345* MIL-C-5015 Rear Release 188-195 MR Waterproof 196-198 CA-A MIL-C-5015 Type 199-201 MS-K, CA-KE, FRF/FVR/FRA/FVA Firewall Connectors 202-217 KFS MIL-C-28840 218-223 CA-B, CA-COM, CGE Bayonet Coupling 224-230 Microminiature Connectors 231-295 • MICRO.050" Contact Spacing 231-276 MDM Micro-D ® Metal Shell 232-239 Connector Saver 239 MDM-PCB Printed Circuit Board 242-245 MDM-C/P Coaxial/Power 246 MD Micro-D Plastic Shell 247-250, 255-257 MDB-PCB Printed Circuit Board 251-252 MDB/Coaxial Coaxial 253-254 MJS Microminiature Center Jackscrew 258-262 MICRO-K Microminiature Circular 263 MIK Plastic Shell - Screw Coupling 264 MIKM Metal Shell - Screw Coupling 265 MIKQ Metal Shell - Quick Disconnect 265-266 MIKQP Plastic Shell - Quick Disconnect 267 MT Microminiature Strip .100"/.075" 268-271 MEB/MEBL Microminiature Edgeboard 272-276 • CENTI .075" Contact Spacing 277-290 2D Double Density D 278-282 2DD Environmental Double Density D 283-285 CDL Centi-D Loc 286 CTA Strip Connectors .100"/.075' 287-290 • NANO .025" Contact Spacing 291-295 NT Strip Connectors 292 NDM NANO-D Metal Shell 293 NJS Center Jackscrew 294-295 Fiber Optic Connectors 296-303 Filter Connectors 304-326 Special Application Connectors 327-331 Hermetic Connectors 327-328 Battery Connectors 329-331 D Subminiature Connectors 332-385 Standard MIL-Spec D 331-343 Combo D ® 344-357 Environmental Products 358-366 Accessories 367-385 Reference 386-392 Contacts, Crimp-MIL-C-39029 386 Index 387-392 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 1 ARINC 600 BKAD/E/F Low insertion force contacts. Both environmental and non- environmental versions. Polarizing posts that are removable from the mating face. Field replaceable inserts for size 22 and power contacts. Up to 800 size 22 contacts in one connector. Crimp, coax, power, printed circuit and wire wrappable post style contacts. Uses standard DPX crimp, insertion/extraction tooling. Waveguide connections available. BKAD/E BKAF Rear Release/Rear Removable Front Release/Front Removable Size 12, 16, 20, 22 Crimp Contacts Size 22 Solder Tail and Wrap Post Contacts BKAD/E connectors represent a major milestones in This new connector is totally intermateable and presenting a new rack and panel connector for intermountable with ARINC 600 connectors now in support of the air transportation market. the field. Several important design concerns have been ad- The BKAF permits the user to easily replace a dressed and solved in this new series. High mating contact in case of problems, rather than disas- forces of pluggable modules in a rack have been semble the entire connector--it is available with reduced by approximately two-thirds. size 22 contacts in wrap post or solder-tail ver- sions. The system maintains the advantages of low The low insertion force contacts are also inter- insertion force technology incorporated in all ARINC changeable with the contacts used in the DPX 600 connectors. series and permit retrofit of existing equipment. Pos-Aline Connector Construction Feature In the ARINC 600 connector series, Size 22 con- The result is that the complement of contacts for tacts are the only size that utilize this design the plug connectors will consist of pin contacts for feature. The hooded socket extends from its in- size 22 and socket contacts for all others. The sulator while the pin contacts are shrouded by its receptacle contacts will be just the reverse, socket front insulator. contact for size 22 and pin contacts for the All other contacts used in this series employ stan- balance. dard contact design. Material Specifications BKAD BKAE BKAF Specifications Material Aluminum alloy Aluminum alloy Aluminum alloy QQ A-591/A380 Shell & Waveguide Alodine Alodine Alodine MIL-C-5541 Finish 1200 1200 1200 Insulator Material Thermoset Thermoset Thermoset N/A Material Copper alloy Copper alloy Copper alloy QQ-C-533 Contacts Finish Gold over Nickel Gold over Nickel Gold over Nickel MIL-G-45204 Termination Crimp Crimp P.C./Wrap Post N/A Grommets/Seals Material N/A Silicone-based Elastomer N/A N/A O-Ring Material N/A Silicone-based Elastomer N/A N/A Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 2 ARINC 600 BKAD/E/F How to Order BKA D 2 A234 M * 3 00 01 * F0 CONNECTOR SERIES CLASS SHELL SIZE CONNECTOR LAYOUT DESCRIPTION SIZE 1 COAX INSERT MODIFIER BOEING COAX MODIFIER SHELL STYLE CONNECTOR MOUNTING MODIFIER POLARIZING POSITION MODIFIER (Contact, Finish, Material) * = For Polarizing Position greater then 99, add third digit. CONNECTOR SERIES BOEING COAX MODIFIER BKA (Per ARINC 600) BCooeainxg ITTC ITTC Coax Contacts Supplied CLASS Code Code Plug Connector Receptacle Connector D - Non-environmental (rear release, crimp AA Blank No Coax Supplied No Coax Supplied contacts) AB B 349-0013-000 349-0014-000 E - Environmental (rear release, crimp con- AC C 349-0015-000 349-0016-000 tacts) AD D 349-0013-000 349-0014-000 349-0017-000 349-0002-000 F - Non-environmental (front release, solder AE E 349-0015-000 349-0016-000 and wrap post #22 contact, rear release 349-0018-000 349-0004-000 all others) AF F 349-0015-000 349-0016-000 349-0017-000 349-0002-000 C - Same as E, except uses BKAD shells, and Less 0 rings on plug side. SHELL STYLE S - Environmental (0-ring is used to seal 3 - Plug (rack side) between connector shell and insulators) 4 - Receptacle (box side) with rear release, crimp contacts. T - Non-environmental connector using fil- CONNECTOR MOUNTING MODIFIER tered contacts (reference Cannon Phoe- 00 - Standard design, .148 dia. holes nix) 01 - With #6-32 ESNA (#12 NCFMA2-62) clinch nuts (see chart) SHELL SIZE 1 - Max. contact capacity - 125 Connector Number of Clinch Nuts 2 - Max. contact capacity - 400 Size Plug Receptacle 1 4 4 3 - Max. contact capacity - 800 2 4 6 CONNECTOR LAYOUT DESCRIPTION 3 8 10 (See page 4) 02 - Size 1 receptacle only - less 3 printed circuit board mounting lugs SIZE 1 COAX INSERT MODIFIER 03 - With #4-40 ESNA (#22 NCFMA2-40) clinch M - Connector contains modified 71W1 or nuts (see chart) 2W2 insert (four MTG screw hole loca- 08 - Size 2 and 3 plug and receptacle only - with tions and coaxial contact used in this #4-40 ESNA (#22 NCFMA2-40) clinch nuts insert are interchangeable between dif- (all mounting holes) ferent manufacturers 09 - Size 2 and 3 plug and receptacle only - with NOTE: A dash must be inserted whenever code does not apply. #6-32 ESNA (#12 NCFMA2-62) clinch nuts (all mounting holes) 16 - Same as - 00 mounting modification except with nickel finished shells .0008 - .0012 thick with EMI grounding spring for plug shells and supplied with non-environmental inserts. 17 - Same as - 00 mounting modification except with nickel finished shells .0008 - .0012 thick with EMI grounding spring for plug shells and supplied with environmental inserts not potted into shell. 23 - With floating eyelets (.048 min. radial float) 4 corner holes per connector. Consult factory if other modifications are required Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 3 ARINC 600 BK AD/E/F How to Order (Continued) CONNECTOR LAYOUT DESCRIPTION Note: All layouts with "OPEN' insert cavity are not supplied with an insulator. If a Blank insert is required please consult factory. Three Digit Number Contained within the Shell Layout Indicates Total Number of Contacts Available (including Waveguide) Connector Shell Shell Cavity Identification Ref. ARINC Connector Shell Shell Cavity Identification Ref. ARINC Layout Size A B C D E F Characteristic Layout Size A B C D E F Characteristic -005 1 OPEN OPEN 5W2 -T173 2 150 10T10 13W2 -060 1 OPEN 60 OPEN 234 2 150 71W1 13W2 709 A060 1 60 OPEN OPEN A234 2 71W1 150 13W2 727 -065 1 OPEN 60 5W2 -246 2 120T2 120T2 6T6 A065 1 60 Open 5W2 -248 2 121 121 6T6 -120 1 60 60 OPEN 250 2 OPEN 150 100 -125 1 60 60 5W2 250A 2 150 BLANK 100 -013 2 OPEN OPEN 13W2 -251 2 Waveguide 150 100 -017 2 2W2 2W2 13W2 -300 2 150 150 OPEN -071 2 OPEN 71W1 OPEN -306 2 150 150 6T6 A071 2 71W1 OPEN OPEN -313 2 150 150 13W2 -085 2 Waveguide 71W1 13W2 -370 2 150 120T2 100 A085 2 71W1 Waveguide 13W2 -400 2 150 150 100 86M 2 2W2 71W1A 13W2 -021 3 4W4 4W4 13W2 BLANK OPEN OPEN -093 2 4W4 4W4 85 -026 3 OPEN OPEN 13W2 OPEN OPEN 13W2 -100 2 OPEN OPEN 100 -113 3 OPEN OPEN 100 OPEN OPEN 13W2 -137 2 121 10T10 6T6 -A113 3 OPEN OPEN 13W2 OPEN OPEN 100 -T141 2 120T2 10T10 13W2 -114 3 4W4 4W4 4W4 4W4 13W2 85 -142 2 71W1 71W1 OPEN -284 3 71W1 71W1 OPEN 71W1 71W1 OPEN -155 2 71W1 71W1 13W2 -310 3 71W1 71W1 13W2 71W1 71W1 13W2 155M 2 71W1A 71W1A 13W2 -330M 3 2W1 2W2 13W2 150 150 13W2 V155M 2 71W1B 71W1A 13W2 -A330M 3 150 150 13W2 2W2 2W2 13W2 158M 2 2W2 71W1A 85 -496 3 121 121 121 121 6T6 6T6 -A158M 2 2W2 71W1B 85 -600 3 150 150 OPEN 150 150 OPEN -163 2 OPEN 150 13W2 -626 3 150 150 13W2 150 150 13W2 A163 2 150 OPEN 13W2 -713 3 150 150 100 150 150 13W2 -164 2 150 Waveguide 13W2 A713 3 150 150 13W2 150 150 100 A164 2 Waveguide 150 13W2 708 -734 3 150 150 100 150 150 3W 165M 2 150 2W2 13W2 -764 3 150 150 64 150 150 100 -A165M 2 2W2 150 13W2 -800 3 150 150 100 150 150 100 -167 2 4W4 150 13W2 -269M 3 2W2 2W2 13W2 2W2 150 100 732 173M 2 2W2 71W1B 100 271C 3 4W4 4W4 13W2 BLANK 150 100 271M 3 2W2 2W2 13W2 4W4 150 100 -326 3 OPEN 150 13W2 OPEN 150 13W2 NOTE. ANY OTHER COMBINATION OF INSERTS WITHIN A SPECIFIC SHELL IS AVAILABLE UPON REQUEST Layout included in the following ARINC configurations 702, 710, 711, 712, 714, 715, 716, 723. Layout included in the following ARINC configurations 707, 718 & 730. Layout included in the following ARINC configurations 701, 702, 703, 704, 705, 706, 724, 725. Layout included in the following ARINC configurations 701, 717, 726, 729. POLARIZING POSITION 01 thru 99 (per ARINC 600) Blank-Polarizing posts or keys not installed but supplied with connector MODIFIER (Contact, Finish, Material) Blank - Rear release, crimp, signal and power SC - Front release .025(0.63) D. x .375 WC - Front release .025(0.63) Sq. x 500 contacts supplied with connector (9.53) solder post and crimp, rear re- (12.7) (3 wraps) wrap post and crimp, (when applicable) lease power contacts (when applica- rear release power contacts (when ap- FO - Contacts not supplied with connector ble) supplied with connector plicable) supplied with connector (FO not stamped on connector) SD - Front release .025(0.63) D. x .500 WD - Front release .025 (0.64) Sq. x 641 FOO - Less contacts and waveguide (FOO not (12.7) solder post and crimp, rear re- (16.28) (3 wraps) wrap post and stamped on connector) lease power contacts (when applica- crimp, rear release power contacts SA - Front release .025(0.63) D. x .150 ble) supplied with connector (when applicable) supplied with con- (3.81) solder post and crimp, rear re- WA - Front release .025(0.63) Sq. x .250 nector lease power contacts (when applica- (6.35) (1 wrap) wrap post and crimp, NOTE: COAXIAL CONTACTS TO BE ORDERED SEPARATELY ble) supplied with connector rear release power contacts (when ap- SB - Front release .025(0.63) D. x .250 plicable) supplied with connector (6.35) solder post and crimp, rear re- WB - Front release .025(0.63 Sq. x .375 lease power contacts (when applica- (9.53) (2 wraps) wrap post and crimp, ble) supplied with connector rear relase power contacts (when ap- plicable) supplied with connector Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 4 ARINC 600 BKAD/E/F Shell Dimensions - Size 1 Plug .205 (5.21)* 1.B40K2A E(3 5S.E6R1)IMESAX 11..011900 ((2287..1699)) .195 (4.95) .130 (3.30) .120 (3.05) 1.195 (30.35)MAX .655 (16.64) .385 (9.78) MAX .645 (16.38) BKAD SERIES .148 +_ .003 (3.76 +_ 0.08)DIA 1.150(29.21)MIN 1.102 (27.99) MAX 4 PLCS MTG HOLES .653 (16.59) .647 (16.43) .55..445655 ((113388..5861)) .1.12055 ( (32.1.687))* A ..118606 ((44..5272))D A 4 PL 6.995 MAX (177.67) 33..882155 ((9976..1960)) .1.13155 ((32..4932))* B B 66..335455 ((116611..4126)) (167M.85I9.N001) ..1023004( .R R7P 6 MLM)AAXX (3.05) 6.(510605 .M10A)X 66..664259 ((116688..7388)) (166.315.337) 4 PL .6(.156155. 4M8I)N 22..005499 ((5522..3004)) (166.314.271) 1.313 (33.35) 1.303 (33.10) C .030 (.76)R .620MIN .479 (12.17) C MAX 4 PL .608 MAX (15.75) .469 (11.91) .250 (15.44) (6.35) MAX .135 (3.43) .830 (21.08) .125 (3.18) .188 (4.78) .820 (20.83) ..557655 ((1144..6305)) 1.1B9K8A (D3 0S.4E3R)I EMSAX .184 (4.67) 33..8755 ((99..7582)) .191 (4.85) .705 (17.91) BKAE SERIES 189 (4.80) .695 (17.65) 1.550 (39.37) MAX 3 PL Retainer Plate Size 1 Plug Panel Cutout * This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. For further information, refer to ARINC 600 specification or consult factory. Receptacle BKAE SERIES 1.531 (38.89) MAX .2.10955 ( (54.2.915))* B1K.A22D1/B (K31A.F0 1S) EMRAIEXS 1.010 (25.65) .130 (3.30) .990 (25.15) .240 (6.10)MAX .191 (4.85) 2 PL .120 (3.05) .655 (16.64) .189 (4.80) .125 (3.18)* .645 (16.38) .105 (2.67) .148 +_ .003 (3.76 +_ 0.08)DIA .030 R 4 PLCS MTG HOLES (.76) MAX 2 PL 5.465 (138.81) A A 5.455 (138.56) 7.455 MAX .1.13155 ((32..4932))* B (189.36) 66..335455 ((116611..4126)) (167.847.500) 3.825 (97.16) MIN 3.815 (96.90) 6.627 (168.33) 6.353 6.607 (167.82) (161.37) 6.347 2.059 (52.30) B (161.21) 2.049 (52.04) .287 R (7.29) MAX 4 PL 11..331033 ((3333..3150)) C (.62.4100) .120 R (3.05) MAX MAX 4 PL C .180 (4.57) .166 (4.22)D .810 (20.57) ..113255 ((33..4138)) B1K.A31D7/B (K33A.F4 5S) EMRAIEXS ..118884 ((44..7687)) 33..6555 ((99..2072)) (1.665.453 9P)L .800 (20.32) .575 (14.60) BKAE SERIES .647 .565 (14.35) 1.670 (42.42) .930 (23.62) MIN (16.43) .705 (17.91) .695 (17.65) Retainer Plate Size 1 Receptacle Panel Cutout *This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. For further information, refer to ARINC 600 specification or consult factory. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 5 ARINC 600 BKAD/E/F Shell Dimensions - Size 2 Plug 1.810 (45.97) 1.790 (45.47) 1.431 (36.35) BKAE SERIES 1.421 (36.09) 1.402 (35.61) MAX .655 (16.64) .130 (3.30) 1.195 MAX .645 (16.38) .120 (3.05) (30.35) BKAD SERIES .148 +_ 003 (3.76 +_ 0.08) DIA 260 (6 60)* 1.102 (27.99) MAX 10 PLCS MTG HOLES 653 (16.59) 250 (6 35) 191 (4.85) 647 (16.43)030 (.76) R .070 (1.78)* 189 (4.80) MAX 4 PL .050 (1.27) 3PL A 5.355 (136.02) A 030 R 5.345 (135.76) (.76) 66..336400 ((116611..5044)) M4 APXL B 3 770 (95.76) 111355 ((23..9423))* B 6 (919757 .M67A)X 6.(510605 .M10A)X 6.645 (168.78) (1666..33154.3377) 6(.156155. 4M8I)N 3 760 (95.50) 6.629 (168.38) 161.21 6.890 (175.01) 120 R MIN (3.05) 2 004 (50.90) MAX 1 994 (50.65) 4 PL 11 225488 ((3311..9750)) C .6(1250. 7M5I)N 22..113255 ((5543..2938)) C (.411.685607)D .608 MAX (4.22) (15.44) 8 PL 168 (4.27) 1.429 ..886555 ((2211..9772)) 11 441105558 (((33455.0..96149))) B1B11.KK15AA958ED0 (S(S33EE09.RR.43II37EE))S S MMAAXX 118884((44..7687)) ((9933..87755582)) 1.(8((413356.660.49.. 231M9304)I))N 25(60. 3M5A)X Retainer Plate Size 2 Plug Panel Cutout * This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. For further information, refer to ARINC 600 specification or consult factory. Receptacle B1.K5A31E (S3E8.R8I9E)S MAX 11..871900 ((4455..9477)) 1.431 (36.35) B1.K2A21D /(B3K1.A0F1 )SMEARXIES 1.421 (36.09) 1.530 .655 (16.64) (38.86) 130 (3.30 .645 (16.38) 191 (4.85) MIN .120 (3.05) 189 (4.80) 260 (6.60)* .148 .003 (3.76 +_ 0.08) DIA. 2 PL 250 (6.35) 10 PLCS MTG HOLES .070 (1.78)* .050 (1.27) 240 (6.10) 030 R MAX (76) A MAX 5.335 (136.02) A 6.353 2 PL 5.345 (135.76) .135 (3.43)* B 6.(917757 .M16A)X B 66..336400 ((116611..5044 (167M.84I7.N500) ((11666.3114..32771)) ((1133..6644..22319304)) 1((..44011...2 8652P60672L0))D .115 (2.92) 3 PL (6.60) 3.770 (95.76) .230 3.760 (95.50) (5.84) 6.627 (168.33) 2 PL 6.607 (167.82) 21..090944 ((5500..9605)) C 2.133 .(132.005 R) 2.780 (54.18) MAX 11..225488 ((3311..9750)) C 22..113255 ((5543..2938)) (7M0A.6X1) (25.52.0808) (25.41.2073) 4 PL MIN .287 R (7.29) MAX 8 PL BKAD/BKAF SERIES .653 (16.59) .865 (21.97) ..116588 ((44..2071)) BKA1E.3 S17E R(3IE3.S45) ..118884 ((44..7687)) .365 (9.27).24(60. 1M0A)X .6427 P(1L6C.43) .855 (21.72) 1.415 (35.94) 1.670 (42.42) .355 (9.02) 1.405 (35.69) Retainer Plate Size 2 Receptacle Panel Cutout *This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. For further information, refer to ARINC 600 specification or consult factory. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 6 ARINC 600 BKAD/E/F Shell Dimensions - Size 3 Plug 3.275 (83.18) 3.245 (82.42) BKAE SERIES 1.402 (35.61) MAX 2.891 (73.43) 2.881 (73.18) 1.1(2590. 2M1A)X 11..995455 ((4499..6460)) .260 (6.60)* .130 (3.50) BKAD SERIES .655 (16.64) 3.310 MIN .250 (6.35) .120 (3.05) 1.102 (27.99) MAX .645 (16.38) .148 +_ .003 DIA. 1.953 (84.07) (3.76 +_ 0.08) (49.61) .030 (.76)R .070 (1.78)* 14 PLCS MTG HOLES (14.99.4475) MAX 4 PL .060 (1.52) 5.355 (136.02) 5.345 (135.76) .030 R MAX (.76) 4 PL 6.355 (161.42) 6.353 .135 (3.43)* 6.345 (161.16) (161.37) .120 R MAX .115 (2.92) 6.500 6.347 (3.05) (1M65A.X10) 6.645 (168.78) (161.21) 4 P6L.515 MIN 6.629 (168.38) (165.48) 6.995 MAX (177.67) .590 MAX 2.004 (50.90) (14.99) 1.994 (50.65) .385 11..225488 ((3311..9750)) 6(2105 .M75IN) 22..113255 ((5543..2938)) ((.9.39.775582)) 3.770 (95.76) .180 3.760 (95.50) (4..15676) D .250 ..889700 ((2222..6110)) 1.1.6588 ((44..2071)) 11..225422 ((3311..8505)) 1.1B9K8A (D30 S.4E3R) IMESAX. ..118884 ((44..7687)) 1(42. 2P2L)(1..(M666654..A53379X5)) (.272.3.88.838389) ..1198319 P((44L..8850)) 1.440 (36.58) BKAE SERIES (16.43) (73.23) 1.430 (36.32) 1.550 (39.37) MAX 2.712 (68.88) 2.702 (68.63) 2.875 (73.02) 2.865 (72.77) Retainer Plate Size 3 Plug Panel Cutout * This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity. For furter information, refer to ARINC 600 specification or consult factory. Receptacle 3.275 (83.18) 3.245 (82.42) 2.891 (73.43) BKAE SERIES 2.881 (73.18) 1.531 (38.89) MAX 1.955 (49.66 BKAD/BKAF SERIES 1.945 (49.40) 1.221 (31.01)MAX 3.000 (76.20) MIN ..226500 ((66..6305))* ..113200 ((33..3005)) ..665455 ((1166..6348)) .(11344. 78P6 L+ _+C_ . S000 .M038 TD)GIA H.OLES ..1198319 P((44L..8850)) 22..888893 ((7733..3283)) 3 PL .(278.279 R) 8M PALX .240 MAX 5.355 (136.02) .070 (1.78)* (6.10) 5.345 (135.76) .060 (1.52) .030 R MAX (.76) 6.355 (161.42) 2 PL 6.870 6.345 (161.16) .120 R MAX (174.50) (3.05) .960 MIN 4.PL (24.38) .135 (3.43)* .930 .115 (2.92) 66..662077 ((116687..3832)) ..118606 ((44..5272)) D (223 P.6L2) 6.975 MAX 14 PL (177.16) 2.004 (50.90) 1.994 (501..6255)8 (31.95) 22..113255 ((5543..2938)) (27M.07A.86X01) 2.20 1.248 (31.70) (25.41.3138)(5M5.I8N8) 2.127 3.770 (95.76) (54.03) 3.760 (95.50) .188 (4.78) ..887500 ((2221..1509)) 1.1.6588 ((44..2071)) 11..225422 ((3311..8505)) 1.B6BK17K.0A3A D1(E47/ B2S (.K3E4A32R. F4I)EM 5SS)AEMXRAIXES .184 (4.67) ((..9933..65205572)) (M.62.A41X00.) (49.116..199)54 237 PL (16(.15..666954.)4 3723 )PL 1.440 (36.58) (49.45) 1.430 (36.32) 2.712 (68.88) 2.702 (68.63) 2.875 (73.02) 2.865 (72.77) Retainer Plate Size 3 Plug Panel Cutout * This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity. For furter information, refer to ARINC 600 specification or consult factory. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 7 ARINC 600 BKAD/E/F Contact Arrangements - Shell Size 1 BKAD/BKAE (Plug Rear face shown) BKAF - Available Receptacle Shell Only (Front Release) Shell Cavity Shell Cavity Shell Cavity Shell Cavity A or B C A or B C A B C B C D B C D 1 2 2 2 2 2 3 3 3 3 3 4 4 4 4 45 56 56 1 A B C D 56 56 1 6 7 7 1 1 7 7 7 1T 1890 1890 2 3 2 234 1890 1890 3 2 11 11 4 5 11 11 4 12 12 3 6 12 12 2T 13 13 7 13 13 14 14 8 14 14 15 15 4 5 9 15 15 5 B C D 10 B C D 30T2 60 4 5W2 40 60 5W2 28 #22 60 #22 4 #12 1 #12 40 #22 60 #22 1 #12 2 #8 TWINAX/COAX 2 #16 2 #16 (#8 Grounded to 2 #5 COAX 2 #5 COAX Shell) REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE REAR REMOVAL CONTACTS ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS (For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory) Contact Arrangements - Shell Sizes 2 and 3 BKAD/BKAE (Plug Rear face shown) Shell Cavity C or F 1 2 1 4 3 2 1 1 5 6 2 3 2 3 6 5 7 8 8 7 4 5 4 10 9 195 1240 11 6 5 6 21 22 13 12 23 24 3 4 6** 6T6** 13W2 24T4** 6 #8 6 #8 4 #20, 4 #12, 3 #16 20 #20, 4 #8 (Metallic Insert) 2 #5 COAX 1 6 A B C D E F G H J K B C D E F G H J K B C D E F G H J K 7 12 1 2 2 1 1 2 3 3 2 2 13 18 3 4 4 3 3 19 24 4 5 5 4 4 5 6 6 5 5 25 29 51 52 53 54 55 7 7 6 6 8 8 7 7 30 34 56 57 58 59 B C D E F G H J K 8 8 9 9 1 2 3 4 5 10 B C D E F G H J K 10 34** 59** 85 100 24 #20, 10 #18 50 #22, 5 #16, 4 #12 80 #22, 4 #20, 1 #16 100 #22 **Pending ARINC release. NOTE: In layouts using #22 contacts mixed with any other contact size (20HD, 16, 12), the size #22 contact type (pin or socket) determines the insulator as a pin insert or a socket insert. REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE, REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS (For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 8 ARINC 600 BKAD/E/F Contact Arrangements - Shell Sizes 2 and 3 BKAD/BKAE (Plug Rear face shown) Shell Cavity A,B,D,E 2W2 4W4 10T10** 24** 2 #1 COAX 4 Modified 10 #8 TRIAX/COAX 24 #12 #1 COAX (#8 Grounded to Shell) (Metallic Insert) (Metallic Insert) 49T2** 60** 71W1 71W1B 47 #20 60 #20 70 #22 70 #22 2 #8 1 #1 COAX 1 #1 COAX 110** 150 120T2 ** 121** 100 #22 150 #22 118 #22 110 #22 5 #12 & 5 #20 2 #8 TWINAX/COAX 5 #16 (#8 Grounded to Shell) 6 #20 ** Pending ARINC release. REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE. REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS (For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 9 ARINC 600 BKAD/E/F Contact Arrangements - Shell Sizes 2 and 3 BKAF - Available Receptacle Shell ONLY (Front Release) SHELL CAVITY A, B, D, E, 71W1 71W1B 10T10** 121F** 70 #22 70 #22 10 #8 110 #22 6 #20 5 #16 150 150 #22 ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS BKAF - Available Receptacle Shell ONLY (Front Release) SHELL CAVITY C, F 6T6** 13W2 100 6 #8 4 #20 100 #22 3 #16 4 #12 2 #5 COAX ** Pending ARINC release. NOTE #22 CONTACTS ARE SOCKETS, 20HD,16, 12 ARE PIN CONTACTS. ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE, FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS (For Contacts Cavity Location and Contact Cavity Identification refer to ARINC 600 or Consult Factory) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 10

Description:
sales office nearest you for immediate Waveguide connections available365. (9.27) .355. (9.02) .240. (6.10). MAX. 1.953. (49.61) 2 PL. 1.947.
See more

The list of books you might like

Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.
DMCA & Copyright: Dear all, most of the website is community built, users are uploading hundred of books everyday, which makes really hard for us to identify copyrighted material, please contact us if you want any material removed.
Copyright @ PDFdrive.to, 2022 | We love our users