Mechanical Engineering, Industrial Materials and Industrial Technologies: Selected, peer reviewed papers from the 2015 2nd International Conference on Mechanical Engineering, Industrial Materials and Industrial Electronics (MII 2015), March 14-15, 2015, L

201 Pages·2015·20.462 MB·English

by  Dehuai Yang

Mechanical Engineering,
Industrial Materials
and Industrial Technologies
Edited by
Dehuai Yang
Mechanical Engineering,
Industrial Materials
and Industrial Technologies
Selected, peer reviewed papers from the
2015 2nd International Conference on
Mechanical Engineering, Industrial Materials and
Industrial Electronics
(MII 2015),
March 14-15, 2015, London, UK
Edited by
Dehuai Yang
Copyright  2015 Trans Tech Publications Ltd, Switzerland

All rights reserved. No part of the contents of this publication may be reproduced or
transmitted in any form or by any means without the written permission of the
publisher.

Trans Tech Publications Ltd
Churerstrasse 20
CH-8808 Pfaffikon
Switzerland
http://www.ttp.net

Volume 763 of
Applied Mechanics and Materials
ISSN print 1660-9336
ISSN cd 1660-9336
ISSN web 1662-7482

Full text available online at http://www.scientific.net

Distributed worldwide by and in the Americas by
Trans Tech Publications Ltd Trans Tech Publications Inc.
Churerstrasse 20 PO Box 699, May Street
CH-8808 Pfaffikon Enfield, NH 03748
Switzerland USA
Phone: [phone]
Fax: [phone] Fax: [phone]
e-mail: [email protected] e-mail: [email protected]
Preface

2015 2nd International Conference on Mechanical Engineering, Industrial Materials and
Industrial Electronics (MII 2015) will be held on March 14-15, 2015, London, UK. This is the
second international conference in the field of mechanical engineering, industrial materials
and industrial technologies after the first one on September 1-2, 2013, UK. The first one in
2013 was a great success. And MII 2015 now will also enjoy its own success.

MII 2015 is an extremely comprehensive international conference focus on the topic of
Mechanical Engineering, Industrial Materials and Industrial Electronics. In the proceeding,
all of us will learn much more knowledge and research information in the field of Mechanical
Engineering, Industrial Materials and Industrial Technologies from the researchers all over
the world.

There are many new issues, progresses and problems in this field since the holding of the
conference MII 2013. And the goal of MII 2015 is used to be the exchange pillar for the
researchers who are in working in the mentioned field and people who is interested in this
field and has his own advanced opinions towards the multifaceted aspects of Mechanical
Engineering, Industrial Materials and Industrial Technologies. The opinions and ideas will
be exchanged; new progresses and information will be shared; various issues, existing
problems, difficulties, solutions will be discussed. We are looking forward to a brighter
future of Mechanical Engineering, Industrial Materials and Industrial Technologies. Besides,
the conference organizer invites some famous keynote speakers to deliver their speech in the
conference. All participates here will have the chance to communicate and discuss with them
face to face. This is really good.

During the whole preparation and organization course, we have got much help from
different people, different departments, and different countries. MII 2015 is co-sponsored
by Information Engineering Research Institute, USA and Academic Conference Institute,
USA. Firstly, thank the strong support and kind help from them to this conference. Secondly,
all the authors should be thanked for their enthusiastic and high-quality papers. Thirdly, all
members of program chairs, reviewers, and program committees should be deeply
appreciated here for their hard work. In a word, we extend many thanks to all the teams,
committees and individuals that make contribution to this big conference!
Organization Committee

Keynote Speaker
Gerald Schaefer, Loughborough University, U.K.

General Chairs
Jian Yang, Huazhong University of Science and Technology, China
Dayun Xu, Wuhan University, China

Publication Chair
Dehuai Yang, Huazhong Normal University, China

International Committee
Ming-Tsung Tsai,Southern Taiwan University of Science and Rechnology, Taiwan
CHICHERNEA G. FLORIN, Transilvania University of Brasov, Romania
Jung-Guk Kim, Hankuk University of Foreign Studies, Korea
Eui in choi, Hannam university, Korea
Ayyoub Akbari-Moghanjoughi, Universiti Putra Malaysia, Malaysia
Hernan Gonzalez Acuña, Universidad Autonoma de Bucaramanaga, Colombia
Fabiane Bordin, University of Vale do Rio dos Sinos, Brazil
Uipil Chong, University of Ulsan, Korea
Grzegorz Sierpiński, Silesian University of Technology, Faculty of Transport
Serap Akdemir, Namık Kemal University, Turkey
J.Manoranjini, Tagore Engg College, Anna University, India
Ana Breda, University of Aveiro, Portugal
Nurdiana binti Samsulrizal, Universiti Teknologi MARA, Malaysia
Radin Yury, All Russia Thermal Engineering Institute, Russia
Yuriy V. Kostyuchenko, Earth of National Academy of sciences of Ukraine, Ukraine
Dwi Agustina, Nanyang Technological University (NTU), Singapore
Carlo Pozzi ,Department of Architecture, Pescara, Italy
Nuraini Abdul Aziz, Universiti Putra, Malaysia
Mou'ad A.Tarawneh, National University of Malaysia, Malaysia
Ha Nguyen Thi Thu, Vietnam Electric Power University, Vietnam
Irwansyah. E, Bina Nusantara University, Indoensia
Maha TEBAA, University Mohammed V–Agdal, Morocco
Tomáš Bublík, Czech Technical University in Prague, Czech Republic
Prerna Saxena, Department of Electronics Engineering, VNIT, India
Artem M. Chirkin, ITMO University, Russian Federation
Nikolay E.Galich, Saint-Petersburg State Polytechnic University, Russian Federation
Yasuaki Ibayashi, Tokyo Institute of Technology, Japan
Paweł Kędzia, Wrocław University of Technology, Poland
Hui-Ching Hsieh, Hsing Wu University, Taiwan
Mehreen Rehman, University of Engineering and Technology, Pakistan
Aliya Askarova, Al-Farabi Kazakh national University, Kazakhstan
Mohammadreza Askaripour Lahiji, Mohammadreza Askaripour Lahiji, Malaysia
Bandit Suksawat, King Mongkut's University of Technology,Thailand
Rashid Hassani, University of Rostock, Germany
Genci Capi, University of Toyama, Japan
Table of Contents
Preface and Organization Committee
Chapter 1: Properties of Materials, Technologies of Production and
Processing
Effect of Alkaline Treatment on Tensile and Impact Strength of Kenaf/Kevlar Hybrid
Composites
N.H. Bakar, K.M. Hyie, J. Aidah, A. Kalam and Z. Salleh 3
Influence of Radiation-Induced Defects on Magnetic Properties of Co Ni Fe O
x 1-x 2 4
Nanomaterials
S. Omarov, S. Baishan, S. Nyssanbayeva, G. Aldjambekova, K. Nurahmetova and G.
Turlybekova 9
The Compressive Properties of Kevlar/Kenaf Hybrid Composites
K.M. Hyie, N.H. Bakar, R. Jazlan, A. Jumahat and A. Kalam 19
Tensile and Impact Strength of Coir Fibre Reinforced Polypropylene Composites: Effect of
Different Temperature Conditions
Z. Salleh, K.M. Hyie, S. Yunus, Y.M. Taib, M.N. Berhan and A. Kalam 25
Effect of Calcination Temperature on Various Concentration of Zinc Substituted Calcium
Phosphate Ceramics
C.M. Mardziah, M.F. Abdul Wahid, K.M. Hyie and N.R. Nik Roselina 30
Effect of Single Based Binder Palm Stearin on Sintered Properties of Hydroxyapatite
Scaffold
S.N. Abd Aziz, M.A. Abu Bakar and I. Muhammad Hussain 36
Effect of Metashaleas SCM on Mechanical and Thermal Properties in Concrete Production
D. Koňáková and E. Vejmelková 41
Modeling and Optimizing the Hardness of the Melted Zone in Submerged Arc Welding
Process Using Taguchi Method
H. Shahverdi Shahraki and H. Mozafari 47
Modeling and Optimizing of Submerged Arc Welding Process by Taguchi Design of
Experiments in Presence of Magnesium Oxide Nano-Particles
H. Shahverdi Shahraki and H. Mozafari 52
Electronic Structure of Chlorophyll a Solution Investigated by Photoelectron Yield
Spectroscopy
Y. Takeda, H. Ezawa, T. Miyauchi, H. Kinjo, K.R. Koswattage, Y. Nakayama and H. Ishi 58
Chapter 2: Design and Research of Machines and Mechanisms,
Mechatronics and Control
DSP-Based on Brushless DC Motor Speed Control by PI Controller Using Back EMF
Detection
D. Kumpanya, C. Kiree, S. Tunyasrirut and D. Puangdownreong 63
The Study of the Synchronization Process in the Gearbox with Automatic Control
A. Blokhin, E. Denisenko, A. Kropp and A. Nedialkov 71
Electromechanical Complex of Test Loading Stand of Multistage Transmissions with
Automatic Control
A. Blokhin, S. Dobryaev, A. Plekhov and V. Titov 78
Reduction of Cogging Torque and Torque Ripple in Exterior Rotor Type BLDC Motor for
EV/HEV Battery Cooling System
J.H. Jeong, K.C. Min and H.W. Cho 86
To the Question of Determining the Plasticity Zones of a Welded Joint of Large Diameter
Pipes
Y.I. Pashkov, M.A. Ivanov, Y.V. Bezgans and T.V. Bezgans 92
b Mechanical Engineering, Industrial Materials and Industrial Technologies
A Study on a Primary Suspension for Improvement of Curving Performance of an Active
Steering Bogie
K.S. Sim, T.W. Park, I.K. Hwang, M.J. Kim and H.M. Hur 97
Acoustic Luneburg Lens as a New Sonar System
S.H. Kim 101
Green Ventilation System Design for Underground Garage
S.M. Chen, Y.Y. Huang and Y.H. Perng 105
Base Algorithms of the Direct Adaptive Position-Path Control for Mobile Objects
Positioning
V. Pshikhopov, M. Medvedev, V. Krukhmalev and V. Shevchenko 110
A Linear CCD Spectrometer Based on FPGA for Light-Source Characterization
R.O. Ocaya 120
Chapter 3: Safety and Reliability of Industrial Objects
In Situ Damage Assessment on Supporting Structure of Coal Conveyor
M. Nurbanasari 129
A Case Study on a Fire Disaster in a Textile Factory
C.S. Lin, M.G. Wu and S.M. Tsai 134
Inter Laboratory Comparison of Testing Procedure of CIPP Liners According EN ISO
11296-4
O. Cigler, P. Waldstein and K. Kubečka 140
Measurement of Air Traffic Control Students Proportion Depending on their Attitude to
Risk at 10-km. Flight Norms Violation
S.P. Borsuk 146
Chapter 4: Signal and Data Processing, Computer Algorithms
Multi-Train Movement Simulation Using MATLAB Object-Oriented Programming
C. Sumpavakup and T. Kulworawanichpong 153
A Stream Data Processing Framework for Location-Based Service Using NoSQL
Technology
N.J. Kim and E.I. Choi 159
The Development of the Intellectual System Optimization Search Operations
A. Koshurina, M. Krasheninnikov, S. Kaniskin, R. Dorofeev and V. Obrezkova 164
A Meshless Semi-Analytical Method for Solving Convection Problems in Complex-Shaped
Closed Cavities
M. Basarab and V. Matveev 170
A New Approach Hybrid Based in Artificial Neural Networks to Detection and
Classification of Failures in Aeronautical Structures
S.S.F. Souza, F. Parra dos Anjos Lima and F.R. Chavarette 175
Design of Microstrip Triplexer Using Common Dual-Mode Resonator with Multi-Spurious
Mode Suppression for Multiband Applications
T. Sugchai, I. Nattapong and C. Apirun 182
Review of Single Cycle Shifter for Structured LDPC Encoder
S. Anggraeni, F.A. Hussin and V. Jeoti 189
CHAPTER 1:
Properties of Materials, Technologies of
Production and Processing