Table Of Content

ELSEVIER AUTHOR INDEX TO VOLUMES 36 AND 37 AGARWAL V., 36:35 FURUKAWA M., 37:277, 37:285 LOCKYER S.A., 37:301 AKUNE K., 37:123 ALE R.M., 37:89 GAFFET E., 36:185 MAINY D., 36:321, 36:327 ALLARD L.F., 36:73 GARCIA E.P., 37:245 MALLARD H., 36:309 AMMANN J,_J., 36:165, 36:379 GEELS K., 36:225 MANNHEIMER W.A., 36:105 ASHBEE K.H.G., 37:343 GIBSON E.D., 37:9 MARDER A.R., 36:35 AYALA A., 37:245 GOFORTH R.E., 37:295 MAROIS P.H., 37:61 GROSSMANN G., 36:235 MARTHINSEN K., 36:53 BAGNALL C., 36:1 GRUM GRUM J., 37:81 MARTIN J.W., 37:105 BANGWEI Z., 37:119 GUAN GUAN S.X., 37:183 MARTIN-GIL F.J., 36:335 BENVENUTI A., 36:271 GUANGYING Z., 36:65 MARTIN-GIL J., 36:335 BERNDT S., 36:93 GuPTA A.K., 37:61 MAYrR P., 36:153 BONTEMPI P., 36:271 MCEVILY A.]J., 36:153 Bozic D., 37:53 HARTWIG K.T., 37:295 MERKEL U., 37:143 BRETSCHNEIDER J., 36:93 HASAKA M., 36:43 MIKUTSU K., 36:43 BROOKS C.R., 36:73 HEIN L.R., 36:379 MITKOV M., 37:53 HELM H., 36:93 MOHAN K., 37:161 CABEZAS C., 37:187 HorITA Z., 37:277, 37:285 MONTAVON G., 36:257 CAO S., 36:73 Hsu F.-Y., 36:365, 36:371 MORIMURA T., 36:43 CARPEN L.I., 36:279 Hsu T.Y., 37:227 MURR L.E., 37:245 CASTAING P., 36:309 Hu Z.Q., 37:183 CHAMA C.C., 37:177 HUANG W., 37:245 NAGANO T., 37:331 CHARLIER J., 37:89 HUNnr J.D., 37:301 NAVARA E., 36:349 CHUNG C.Y., 37:227 NAZAR A.M., 36:165, 36:379 CODDET C., 36:257 KENNEDY C., 37:245 NEBAUER E., 37:143 COLMENERO J.C., 37:123 KLAAR H.-J., 36:365, 36:371 NECTOUX J.P., 36:327 CORNWELL L.R., 37:295 KLEIN A., 37:143 NEMOTO M., 37:277, 285 Corti S., 36:271 KNUTSEN R.D., 37:31 NICOLETTI G., 36:235 KONDO N., 37:331 Niou C.-S., 37:245 DAHMS M., 36:371 KONDO S.-I., 36:43 NORTHWOOD D.O., 36:83 DAVIES R., 37:131 KONKOL P.]J., 37:195 DHUA S.K., 37:1 OGAWA H., 37:331 DONG H., 37:195 LAHAYE C.T.W., 36:191 OSTERLE W., 37:143 LANG Y., 37:169 EDNIE K.H., 36:243 LANGDON T.G., 37:277, 37:285 PAN, C., 36:5 EDMONDS D.V., 37:301 LAROCHE §&., 36:203 PAPPU T.S., 37:245 EHRNSTEN U.M., 36:279 LEMASCON A., 36:309 PENDRAY A.H., 37:9 EL KEDIM O., 36:159, 36:185 LE May I., 36:175 POHL K., 36:153 EMBURY J.D., 37:239 LESAGE P., 36:159 LESKO A., 36:349 QINGLONG Z., 37:119 FANG HLS., 37:95 LI C., 36:65 FANG J., 37:23 Li D., 37:183 RAHOUAD} R., 36:159, 36:185 FERREYRA E., 37:245 LI G.P., 37:183 RANDLE V., 37:131 FORGET C., 36:203 Li ¥.; 36-27 RAY A., 37:1 FRIESEN T., 36:213 LIKONEN J., 36:279 REBELLO J.M.A., 37:89 FROYEN L., 36:151, 36:357 Liu Y.Y., 37:183 RENARD D., 36:327 FURTADO H.C., 36:175 LLOYD D.J., 37:61 RESSEL P., 37:143 349 MATERIALS CHARACTERIZATION 37:349-350 (1996) © Elsevier Science Inc., (1996) 1044-5803 /96/$15.00 655 Avenue of the Americas, New York, NY 10010 PI S1044-5803(97)00039-6 350 Author Index Ricci N., 36:271 TACHIKART M.., 36:159, 36:185 WENPU D., 37:169 RICKERBY D.G., 36:213 TONG X.C., 37:95 WITTRIDGE N_J., 37:31 RIVAS J.M., 37:245 Toy S.M., 37:39 Wooo J.T., 37:239 RUCKERT M., 36:225 TSUREKAWA S., 37:331 WOUTERS R., 36:357 SAMUELS L.E., 37:211 UGuz A., 37:105 Xi Y., 3601 SANCHEZ J.C., 37:245 URBAN I., 37:143 XUANYUAN Q., 37:119 SARABIA-HERRERO F.J., 36:335 SCHULSON E.M., 37:23 VALIEV R.Z., 37:277, 285 SHUCHUAN C.., 37:227 YANG J., 37:153 VAN DER GRIN A., 36:151 SEMIATIN S.L., 37:295 YAO M., 36:27 VANDER Voort G., 36:151 SILVA F.A., 36:165 YUN M., 37:301 VANDERVOORT VANDER VOORT SMITH D.J., 37:285 G.F., 36:291 SMITH J.L., 37:239 VARJONEN O.A., 36:279 SOKOLOWSKI J.H., 36:83 ZARZOUR J.F., 37:195 VERHOEVEN J.D., 37:9 STOYAN D., 36:93 ZELIN M.G., 37:311 STRUM R., 37:81 ZHANG, Z., 36:5 STRUTT P.R., 37:161 WAKAIF., 37:331 ZHOU R., 37:239 SUN D., 36:83 WANG Q,J., 37:183 ZUMELZU E., 37:187 SUN X.-C., 36:83 WANG G.-X., 36:371 ZUOBAO F., 37:169 SWISHER J.H., 37:153 WANGYU H., 37:119 ZUYAO X., 37:227 ELSEVIER SuBJECT INDEX TO VOLUMES 36 AND 37 CATEGORIES Aluminum Alloys Microindentation Hardness Archeometallurgy Microscopy Bibliography Microstructural Characterization: CerMets Book Reviews, New Books Microstructural Characterization: Intermetallics Casting Materials & Technology Microstructural Characterization: Metals Ceramics Microstructural Characterization: Using Color Coatings/Platings Modeling Composites Nano Grained Materials Copper Alloys Nano Materials Corrosion Nickel Alloys Crystallography Non-Metallic Inclusions Damascus Steel Organic Materials/Polymers Diffusion Phenomena Oxidation, Corrosion, Environmental Interactions Dispersion Hardening Phase Diagrams/Stability Editorials Phase Identification Electro-Deposition (all types) Phase Transformations Electroless Deposition (all types) Powder Metallurgy Equal Channel Angular Processing Preparation Techniques Extraction Techniques Quantitative Metallography Failure Analysis Radiation Effects Field Metallography Rapid Solidification Fractography Recrystallization Fracture Theory/Crack Tips Semiconductors/Magnetic Film Heat Treating Shape Memory: Alloys, Effect Image Analysis Solder Joints Inclusions/Second Phase Particles Statistical Analysis Intermetallics Steels Iron & Iron-Base Alloys Surface Hardening Lead-Tin Alloys Texture/Orientation Life Assessment Thermal History Mechanical Alloying Titanium Alloys Mechanical Behavior: Creep, Fatigue, Fracture, Welding, Joining Superplasticity X-Ray Diffraction Metallic Oxides & Glasses Zinc Alloys Metallographic Preparation/Techniques Aluminum Alloys Distribution of Al;2Fe3Si and (FeAl,)Si in a HIPed Influence of Microstructural Parameters on Strain Al-10.71 wt.% Si Casting, 37:177 Localization in Uniaxial Tension, 36:159 Evolution of Grain Boundary Structure in Micro- and Macrodefects in Thin Sheet Twin-Roll Submicrometer-Grained Al-Mg Alloy, 37:285 Cast Aluminum Alloys, 37:301 Grain Sizing of Anodized Aluminum by Color Microstructure Characteristics of a Rapidly Image Analysis, 36:203 Solidified Al-Si-Ti-Pb Alloy, 37:95 MATERIALS CHARACTERIZATION 37:351-356 (1996) © Elsevier Science Inc., (1996) 1044-5803 /96/$15.00 655 Avenue of the Americas, New York, NY 10010 PII S1044-5803(97)00040-X 352 Subject Index Review of the Techniques for Extraction of Second- Corrosion Phase Particles from Aluminum Alloys, 37:61 Studying Localized Corrosion in Stainless Steels Secondary Processing of Electron Backscatter Data with Surface-Sensitive Methods, 37:279 from an Aluminum Alloy, 37:131 Transmission Electron Microscopic Investigation of Thermoelectric Power Characterization of a 2024 Hot-Salt Cracking in Titanium Alloys, 37:39 Aluminum Alloy During Solution Treatment and Aging, 36:83 Crystallography Characterization of Domain Boundaries in Nis;Mo Archeometallurgy by Convergent Beam Electron Diffraction, 36:73 Metallography of Ancient Bronzes: Study of Pre- Roman Metal Technology in the Iberian Damascus Steel Peninsula, 37:335 Wootz Damascus Steel Blades, 37:9 Stone-Working Axe Heads Fabricated by Convicts at an Early Australian Colony, 37:211 Wootz Damascus Steel Blades, 37:9 Diffusion Phenomena Simulation of Chromized Coating Processing and Bibliography Microstructure, 36:35 A Bibliography of Books Relating to Materials Microscopy, 37:105 Dispersion Hardening NONE Book Reviews, New Books 36:49, 36:51, 36:103, 37:51, 37:165, 37:237 Editorials 36:1 Casting Materials & Technology Distribution of Al;2Fe3Si and (FeAl,)Si in a HIPed Electro-Deposition (all types) Al-10.71 wt.% Si Casting, 37:177 Simulation of Chromized Coating Processing and Intergranular Fracture of Low-Alloy Cast Steel, 36:65 Microstructure, 36:35 Long Period-Structure of Spin-Cast FeBSiz, 36:43 Ceramics Electroless Deposition (all types) Properties of Electroless Ni-W-P Amorphous Ceramics Superplasticity: Deformation Mechanisms Alloys, 37:119 and Microstructures, 37:331 Coatings/Platings Electron Microscopy (all types) High-Strength, High-Conductivity Copper-Steel Characterization of Domain Boundaries in NisMo Composite, 37:239 by Convergent Beam Electron Diffraction, 36:73 Microstructural Examination of Layered Coatings Discontinuous Precipitation in a Zn-1.6 wt.% Al by Scanning Electron Microscopy, Transmission Alloy, 37:123 Electron Microscopy, And Atomic Force Evolution of Grain Boundary Structure in Microscopy, 37:213 Submicrometer-Grained Al-Mg Alloy, 37:285 Properties of Electroless Ni-W-P Amorphous Hydride-Dehydride Conversion of Solid Ti6AI4V to Alloys, 37:119 Powder Form, 37:53 Quantification of Particle Morphologies in View of Influence of Si Content on Microstructure of TiAl Quality Control of the Thermal Spray Process, 37: Alloys, 37:371 257 Long Period-Structure of Spin-Cast FeBSin, 36:43 Simulation of Chromized Coating Processing and A Metallographic and Fractographic Study of the Microstructure, 36:35 Origin of Cleavage Fracture in Mild Steel, 36:27 Metallographic Preparation of Soft Materials: Lead Composites Alloys, 37:243 Analysis of Internal Structures of Composite Microstructural Characterization of High-Carbon Materials by Second-Order Property of Mosaic Ferrochromium, 37:349 Patterns, 36:11 Microstructural Examination of Layered Coatings Failure Investigation of Polymer and Composite by Scanning Electron Microscopy, Transmission Material Structures in the Mechanical Electron Microscopy, And Atomic Force Engineering Industry, 37:309 Microscopy, 37:213 Microstructure Characteristics of a Rapidly Copper Alloys Solidified Al-Si-Ti-Pb Alloy, 37:95 Influence of Microstructural Parameters on Strain Microstructures of Rapidly Solidified Powder and Localization in Uniaxial Tension, 36:159 Extruded Rod of Ni3Ge, 37:23 Metallography of Ancient Bronzes: Study of Pre- Morphological and Analytical Characterization of Roman Metal Technology in the Iberian Inclusions: Relation with Processing Parameters Peninsula, 37:335 and Properties of Use, 37:321 Subject Index 353 Morphologies of the Transition Region in Dissimilar Metallography in Life Assessment of Power Plants, Austenitic-Ferritic Welds, 36:5 36:175 Nanostructural Materials Formation by Mechanical Scanning Electron Microscope Fractography in Alloying: Morphologic Analysis Based on Failure Analysis of Steels, 37:357 Transmission and Scanning Electron Microscopic Observations, 36:185 Field Metallography A New Preparation Method for Cross-Sectional Metallography in Life Assessment of Power Plants, TEM Specimens, 37:365 36:175 Observation of Nanoscale Hexagonal Close-Packed Cobalt inside Tungsten Carbide in Consolidated Fractography Spray-Converted Nanocomposite WC-Co by Comparison of the Fractographic Features of a Diffractogram Analysis of High-Resolution Carburized Steel Fractured Under Monotonic or Electron Microscopy Images, 37:161 Cyclic Loading, 36:153 Preparation, Transmission Electron Microscopy, Intergranular Fracture of Low-Alloy Cast Steel, 36:65 and Microanalytical Investigations of Metal-III-V A Metallographic and Fractographic Study of the Semiconductor Interfaces, 37:143 Origin of Cleavage Fracture in Mild Steel, 36:27 Recovery and Recrystallization Characterization in Three-Dimensional Reconstruction of Fracture Ferritic Stainless Steel by Using Electron Surfaces, 37:379 Channeling Contrast, 37:31 Scanning Electron Microscope Fractography in Fracture Theory/Crack Tips Failure Analysis of Steels, 37:357 Plastic Zone Size Measurement Techniques for Secondary Processing of Electron Backscatter Data Metallic Materials, 37:105 from an Aluminum Alloy, 37:131 TEM Study of the Microstructure of HSLA100 Steel, Heat Treating 37:169 Microstructure Analysis of Nodular Iron 400-12 Transmission Electron Microscopic Investigation of After Laser Surface Melt Hardening, 37:81 Hot-Salt Cracking in Titanium Alloys, 37:39 Thermoelectric Power Characterization of a 2024 Aluminum Alloy During Solution Treatment and Equal Channel Angular Processing Aging, 36:83 Bulk Ultrahigh-Modulus Polyethylene, 37:301 Ceramics Superplasticity: Deformation Mechanisms Image Analysis and Microstructures, 37:331 Grain Sizing of Anodized Aluminum by Color The Equal Channel Angular Extrusion Process for Image Analysis, 36:203 Materials Processing, 37:295 Image Processing for Particle Characterization, 36:165 Evolution of Grain Boundary Structure in New Developments in Data Processing of Noisy Submicrometer-Grained Al-Mg Alloy, 37:285 Images, 37:327 High-Strength, High-Conductivity Copper-Steel Three-Dimensional Reconstruction of Fracture Composite, 37:239 Surfaces, 37:379 Micro+ and Macrodefects in Thin Sheet Twin-Roll Cast Aluminum Alloys, 37:301 Inclusions/Second Phase Particles Microstructural Characteristics of an Ultrafine Daily Routine Quantitative Assessment of Grain Metal Processed with Equal-Channel Microstructure of Steel by Image Analysis, 36:191 Angular Pressing, 37:277 Microstructural Characterization of High-Carbon Novel Deformation Processes and Microstructures Ferrochromium, 37:349 Involving Ballistic Penetrator Formation and Microstructure of Second-Phase Particles in High- Hypervelocity Impact and Penetration Temperature Ti-55 Alloy after Creep, 37:183 Phenomena, 37:245 Morphological and Analytical Characterization of Processes of Microstructural Evolution during Inclusions: Relation with Processing Parameters Superplastic Deformation, 37:311 and Properties of Use, 37:321 Review of the Techniques for Extraction of Second- Extraction Techniques Phase Particles from Aluminum Alloys, 37:61 Review of the Techniques for Extraction of Second- Phase Particles from Aluminum Alloys, 37:61 Intermetallics Characterization of Domain Boundaries in Nis;Mo Failure Analysis by Convergent Beam Electron Diffraction, 36:73 Comparison of the Fractographic Features of a Microstructures of Rapidly Solidified Powder and Carburized Steel Fractured Under Monotonic or Extruded Rod of Ni3Ge, 37:23 Cyclic Loading, 36:153 Failure Investigation of Polymer and Composite Iron & Iron-Base Alloys Material Structures in the Mechanical Influence of Microstructural Parameters on Strain Engineering Industry, 37:309 Localization in Uniaxial Tension, 36:159 354 Subject Index Microstructure Analysis of Nodular Iron 400-12 Microindentation Hardness After Laser Surface Melt Hardening, 37:81 Comparison Between Constant Force and Constant Thermomechanical Training Behavior and Its Rate of Feed in Materialographic Cut-Off Dynamic Mechanical Analysis in an Fe-Mn-Si Machines: Surface Quality in Relation to Cutting Shape Memory Alloy, 37:227 Speed, Force, and Rate of Feed, 37:225 Stress-Strain Characteristics of the Heat-Affected Lead-Tin Alloys Zone in an Hy-100 Weldment as Determined by Metallographic Preparation of Soft Materials: Lead Microindentation Testing, 37:195 Alloys, 37:243 Microscopy Life Assessment A Bibliography of Books Relating to Materials Metallography in Life Assessment of Power Plants, Microscopy, 37:105 36:175 Microstructural Characterization of High-Carbon Processes of Microstructural Evolution during Ferrochromium, 37:349 Superplastic Deformation, 37:311 Recovery and Recrystallization Characterization in Ferritic Stainless Steel by Using Electron Mechanical Alloying Channeling Contrast, 37:31 Nanostructural Materials Formation by Mechanical Alloying: Morphologic Analysis Based on Transmission and Scanning Electron Microscopic Microstructural Characterization: CerMets Observations, 36:185 Observation of Nanoscale Hexagonal Close-Packed Cobalt inside Tungsten Carbide in Consolidated Mechanical Behavior: Creep, Fatigue, Fracture, Spray-Converted Nanocomposite WC-Co by Superplasticity Diffractogram Analysis of High-Resolution Comparison of the Fractographic Features of a Electron Microscopy Images, 37:161 Carburized Steel Fractured Under Monotonic or Cyclic Loading, 36:153 Microstructural Characterization: Intermetallics High-Strength, High-Conductivity Copper-Steel Microstructures of Rapidly Solidified Powder and Composite, 37:239 Extruded Rod of Ni;Ge, 37:23 Influence of Microstructural Parameters on Strain Localization in Uniaxial Tension, 36:159 Intergranular Fracture of Low-Alloy Cast Steel, 36:65 Microstructural Characterization: Metals Microstructure of Second-Phase Particles in High- Evolution of Grain Boundary Structure in Temperature Ti-55 Alloy after Creep, 37:183 Submicrometer-Grained Al-Mg Alloy, 37:285 Plastic Zone Size Measurement Techniques for Influence of Si Content on Microstructure of TiAl Metallic Materials, 37:105 Alloys, 37:371 Processes of Microstructural Evolution during Microstructural Characterization of High-Carbon Superplastic Deformation, 37:311 Ferrochromium, 37:349 Stress-Strain Characteristics of the Heat-Affected Zone in an Hy-100 Weldment as Determined by Microstructural Characterization: Using Color Microindentation Testing, 37:195 Metallography of Ancient Bronzes: Study of Pre- Thermomechanical Training Behavior and Its Roman Metal Technology in the Iberian Dynamic Mechanical Analysis in an Fe-Mn-Si Peninsula, 37:335 Shape Memory Alloy, 37:227 Microstructural Manifestations in Color: Some Applications for Steels, 37:1 Metallic Oxides & Glasses Image Processing for Particle Characterization, 36: 165 Modeling Analysis of Internal Structures of Composite The Phase Stability of Zn2Ti3Og, 37:153 Materials by Second-Order Property of Mosaic Metallographic Preparation/Techniques Patterns, 36:11 Metallographic Preparation of Soft Materials: Lead Characterization of the Degree of Regularity of Alloys, 37:243 Two-Dimensional Random Quasi-Lattice A Metallographic Technique for Detecting Structures, 36:93 Martensite-Austenite Constituents in the Weld Comparative Analysis of the Size Distributions of Heat-Affected Zone of a Micro-alloyed Steel, 37: Linear, Planar, and Spatial Poisson Voronoi Cells, 89 36:53 A New Preparation Method for Cross-Sectional TEM Specimens, 37:365 Nano Grained Materials Studying Localized Corrosion in Stainless Steels Evolution of Grain Boundary Structure in with Surface-Sensitive Methods, 37:279 Submicrometer-Grained Al-Mg Alloy, 37:285 Subject Index Nano Materials Quantitative Metallography Microstructural Characteristics of an Ultrafine Daily Routine Quantitative Assessment of Grain Metal Processed with Equal-Channel Microstructure of Steel by Image Analysis, 36:191 Angular Pressing, 37:277 Grain Sizing of Anodized Aluminum by Color Nanostructural Materials Formation by Mechanical Image Analysis, 36:203 Alloying: Morphologic Analysis Based on Image Processing for Particle Characterization, 36:165 Transmission and Scanning Electron Microscopic Microstructural Examination of Layered Coatings Observations, 36:185 by Scanning Electron Microscopy, Transmission Observation of Nanoscale Hexagonal Close-Packed Electron Microscopy, And Atomic Force Cobalt inside Tungsten Carbide in Consolidated Microscopy, 37:213 Spray-Converted Nanocomposite WC-Co by Quantification of Particle Morphologies in View of Diffractogram Analysis of High-Resolution Quality Control of the Thermal Spray Process, 37: Electron Microscopy Images, 37:161 257 Nickel Alloys Radiation Effects Characterization of Domain Boundaries in Nis;Mo Metallographic Assessment of the Thermal by Convergent Beam Electron Diffraction, 36:73 Exposure to the Three Mile Island Unit 2 Reactor Properties of Electroless Ni-W-P Amorphous Lower Head, 37:291 Alloys, 37:119 Rapid Solidification Non-Metallic Inclusions Microstructure Analysis of Nodular Iron 400-12 Intergranular Fracture of Low-Alloy Cast Steel, 36:65 After Laser Surface Melt Hardening, 37:81 Microstructure Characteristics of a Rapidly Organic Materials/Polymers Solidified Al-Si-Ti-Pb Alloy, 37:95 Failure Investigation of Polymer and Composite Material Structures in the Mechanical Recrystallization Engineering Industry, 37:309 Recovery and Recrystallization Characterization in Ferritic Stainless Steel by Using Electron Oxidation, Corrosion, Environmental Interactions Channeling Contrast, 37:31 Observations on the Influence of Cleaners on Material Corrosion in the Food Industry, 37:187 Semiconductors/Magnetic Film Processes of Microstructural Evolution during A New Preparation Method for Cross-Sectional Superplastic Deformation, 37:311 TEM Specimens, 37:365 Preparation, Transmission Electron Microscopy, Phase Diagrams/Stability and Microanalytical Investigations of Metal-III-V The Phase Stability of Zn2Ti3Og, 37:153 Semiconductor Interfaces, 37:143 Phase Identification Shape Memory: Alloys, Effect A Metallographic Technique for Detecting Thermomechanical Training Behavior and Its Martensite-Austenite Constituents in the Weld Dynamic Mechanical Analysis in an Fe-Mn-Si Heat-Affected Zone of a Micro-alloyed Steel, 37:89 Shape Memory Alloy, 37:227 Phase Transformations Solder Joints Discontinuous Precipitation in a Zn-1.6 wt.% Al Comparison Between Constant Force and Constant Alloy, 37:123 Rate of Feed in Materialographic Cut-Off Machines: Surface Quality in Relation to Cutting Powder Metallurgy Speed, Force, and Rate of Feed, 37:225 Hydride-Dehydride Conversion of Solid Ti6AI4V to Preparation of Soft Solder Joints, 37:235 Powder Form, 37:53 Statistical Analysis Preparation Techniques Characterization of the Degree of Regularity of Assessment of Material Thermal History in Two-Dimensional Random Quasi-Lattice Elevated Temperature Components, 37:271 Structures, 36:93 Comparison Between Constant Force and Constant Morphological and Analytical Characterization of Rate of Feed in Materialographic Cut-Off Inclusions: Relation with Processing Parameters Machines: Surface Quality in Relation to Cutting and Properties of Use, 37:321 Speed, Force, and Rate of Feed, 37:225 Preparation of Soft Solder Joints, 37:235 Steels Preparation, Transmission Electron Microscopy, Comparison of the Fractographic Features of a and Microanalytical Investigations of Metal-III-V Carburized Steel Fractured Under Monotonic or Semiconductor Interfaces, 37:143 Cyclic Loading, 36:153 356 Subject Index Daily Routine Quantitative Assessment of Texture/Orientation Microstructure of Steel by Image Analysis, 36:191 Secondary Processing of Electron Backscatter Data A Metallographic and Fractographic Study of the from an Aluminum Alloy, 37:131 Origin of Cleavage Fracture in Mild Steel, 36:27 A Metallographic Technique for Detecting Thermal History Martensite-Austenite Constituents in the Weld Assessment of Material Thermal History in Heat-Affected Zone of a Micro-alloyed Steel, 37: Elevated Temperature Components, 37:271 89 Metallographic Assessment of the Thermal Microstructural Manifestations in Color: Some Exposure to the Three Mile Island Unit 2 Reactor Applications for Steels, 37:1 Lower Head, 37:291 Morphological and Analytical Characterization of Inclusions: Relation with Processing Parameters Titanium Alloys and Properties of Use, 37:321 Hydride-Dehydride Conversion of Solid Ti6AI4V to Morphologies of the Transition Region in Dissimilar Powder Form, 37:53 Austenitic-Ferritic Welds, 36:5 Influence of Si Content on Microstructure of TiAl Observations on the Influence of Cleaners on Alloys, 37:371 Material Corrosion in the Food Industry, 37:187 Microstructure of Second-Phase Particles in High- Plastic Zone Size Measurement Techniques for Temperature Ti-55 Alloy after Creep, 37:183 Metallic Materials, 37:105 Transmission Electron Microscopic Investigation of Recovery and Recrystallization Characterization in Hot-Salt Cracking in Titanium Alloys, 37:39 Ferritic Stainless Steel by Using Electron Channeling Contrast, 37:31 Welding, Joining Scanning Electron Microscope Fractography in Morphologies of the Transition Region in Dissimilar Failure Analysis of Steels, 37:357 Austenitic-Ferritic Welds, 36:5 Stress-Strain Characteristics of the Heat-Affected Stress-Strain Characteristics of the Heat-Affected Zone in an Hy-100 Weldment as Determined by Zone in an Hy-100 Weldment as Determined by Microindentation Testing, 37:195 Microindentation Testing, 37:195 Studying Localized Corrosion in Stainless Steels with Surface-Sensitive Methods, 37:279 X-Ray Diffraction TEM Study of the Microstructure of HSLA100 Steel, Microstructures of Rapidly Solidified Powder and 37:169 Extruded Rod of Ni3Ge, 37:23 Surface Hardening Zinc Alloys Microstructure Analysis of Nodular Iron 400-12 Discontinuous Precipitation in a Zn-1.6 wt.% Al After Laser Surface Melt Hardening, 37:81 Alloy, 37:123 eest a