Table Of Content

AUTHOR INDEX TO VOLUMES 32 AND 33 ABALLE M., 33:135 Escupero R., 32:189 KiNG T., 32:139 Asurto S., 32:189 KLEINOSKY M.]J., 33:369 Apeva P., 33:135, 349 FANG H.-s., 33:169 Koo H.H., 32:51 AKUNE K., 33:113 Farco G.H., 33:393 KUNSMANN H., 32:139 ALLEN T., 32:239 Fenc C., 32:15 Kurzyp.Lowski K.J., 32:105 ARSENAULT R.J., 32:275 FRASER H.L., 33:357 Frost H.]J., 32:257 L’ Esperance G., 32:3 BaESLACK W.A., 32:51; 33:357 LigsBLicH M., 33:349 BAGNALL C., 32:1; 33:1 Garcid E., 32:119 Lu C.T., 32:137, 139 BAKER I., 33:187 GeorcE E.P., 32:139 LouTHAN M.R., 32:25; 33:155 BARTHOLOMEUSZ M.F., 33:377 GuHosH A., 33:321 LuEvANO A.]J., 33:175 BaykaraA T., 33:329 GiFKINS R.C., 32:59 Beyer J., 32:161 Gu J., 32:119 MaonsEn J.S., 32:169 Buabur! A., 33:321 Gooia A.K., 33:403 Mansour K., 32:237 BHAUMIK S.K., 32:41 Go .psTEIN J.I., 33:93 Marper A.R., 33:45, 93 BLUMENTHAL W.R., 32:35 Gomez R., 32:189 Marquina M.L., 32:189 BLun S.T., 33:93 Goncai S., 33:387 Marquina V., 32:189 BOWERMAN B.S., 33:407 GONZALEZ-CaARRASCOJ.L., 33:135, Martin J.W., 33:11 Bozic D., 32:89, 97 349 May I.L., 33:79 Broperick T.F., 33:357 GyunrTER V.E., 32:179 Mayotte J.R., 33:147 Brooks C.R., 33:21, 195 McGiL B.L., 33:195 Bystrzyck! J., 32:105 HEinricu J.C., 32:287 MeEnc Q.C., 32:3 HERMIDA J.D., 32:127 Mercapo P.G., 32:169 CAMERON D.W., 33:37 Herrera J.M., 33:33 Misiru Z., 33:329 Cao S., 33:21 Hitcer J.P., 33:343 Mitkov M., 32:89, 97 CAPELLADES R., 32:119 Hint M.A., 32:35 Morin C.R., 33:255 CarRuANA G., 33:349 Honc B.D., 32:3 Mukuerj! D., 33:403 CHAWLA K.K., 33:83 Horton J.A., 32:139 Mu _per I.J.H., 32:161 CHENIER R.J., 33:51 MuRAt S., 33:99 CuarK E.A., 32:237 Iuic N., 32:89 Murr L.E., 33:65 CiarkK S., 32:15 ISHIHARA T., 32:229 Murthy K.S.S., 33:99 CLIMENT F., 32:119 ITin V.I., 32:179 CoLMENERO J.C., 33:113 Nakata Y., 32:205 Connors W.C., 33:245 Cowai.t M.C., 33:85 JARDINE A.P., 32:169 Niou C-S., 33:65 CristINA M.C., 33:135 JIAN L., 32:215 NortHwoop D.O., 33:3 Czujko T., 32:105 JIANGLONG L., 33:387 JiMENEz M., 32:189 OntsukA H., 32:229 Dar Kw.Z., 33:163 Jovanovic M., 32:89 O’Keere TJ., 33:311 Dias O.C., 33:147 Jovanovic M.T., 32:97 Dickson J.I., 32:3 JuHas M., 33:357 Pan C., 33:87 DOLLAHON N.R., 33:393 PaRADKAR A.G., 33:403 Donc Y.Y., 33:163 Kajiwara S., 32:229 Peiwao D., 33:387 DrosnjaK D., 32:89 Kane J.P., 33:82 PEnsE A.W., 33:295 Duranp M.A., 33:51 Kao M., 32:139 Pérez P., 33:349 KEISER J.R., 33:147 Poirier D.R., 32:287 ELLs F.V., 32:79 KELLY A.M., 32:35 Powe. G.W., 33:275 ©Elsevier Science Inc. 1994 MATERIALS CHARACTERIZATION 33:409-410 (1994) 655 Avenue of the Americas, New York, NY 10010 1044-5803 /94/$7.00 410 Author Index Przystura M.A., 33:175 SMitH B.J., 33:45 WayMaAN C.M., 32:137, 215 PTASIENSKI J.J., 33:75 Somers B.R., 33:295 Went J.A., 33:377 Sonu C.H., 33:311 WESSBECHER SKAF D., 33:393 RAMAKRISHNAN K.N., 33:119, 129 Sparks C.J., 32:139 West S.L., 33:155 Raman K‘5S., 33:99 SPENCER P.R., 33:33 WHEELER D.A., 32:25; 33:155 Raw D.E., 32:25; 33:155 STAFFORD S.W., 33:33 Whittaker G., 33:21 Ray K.K., 33:321 Sun X-C., 33:3 WILKINSON J.A., 33:255 Reiswic R.D., 32:35 Wu M.H., 32:195 Ripaura R., 32:189 Tapaki T., 32:205 Rios-jarA D., 32:189 TARIN P., 33:33 X1a0 H., 33:187 ROVIGLIONE A., 32:127 THOMA P.E., 32:161 Yamamoto O., 32:205 SACHDEVA R.L.C., 32:179 Ucuz A., 33:329 YAN J.-j., 33:169 SCHANKULA M.H., 33:51 Urabnyaya G.S., 32:41 YANG Z.-G., 33:169 ScHeTky L.M., 32:195 Yu H.-s., 33:169 ScHETKY L.McD., 32:137 VaiwYA M.L., 32:41 SEMIATIN S.L., 32:195 VANDER Voort G.F., 33:193 Yuan D.W., 33:369 SHABALOVSKAYA S.A., 32:179 ZARZOUR J.F., 33:369 SHaAw W,J.D., 33:57 WANG J.-j., 33:169 SHIH H.K., 33:65 Wanc T.M., 33:163 ZHANG J., 33:175 Suimizu K., 32:205 Warner A.W., 33:393 ZHANG Z., 33:87 SHIPLEY R.J., 33:255 Was GSS., 32:239 ZHENG Y.-k., 33:169 SLADE J.P., 33:51 WATKINSON P.C., 33:11 ZIN S.J., 33:163 SUBJECT INDEX TO VOLUMES 32 AND 33 CATEGORIES Aluminum Alloys Microstructural Characterization: Metals Book Reviews, New Books Microstructural Characterization: Nonmetals Cast Iron Modeling Coatings Nickel Alloys Copper Alloys Oxidation, Corrosion, Environmental Interactions Dispersion Hardening Phase Transformations Editorials Powder Metallurgy Electron Microscopy Quantitative Metallography Failure Analysis, Fractography Remote Metallography High Temperature Deformation Shape Memory Alloys Intermetallics Stress Corrosion Cracking Lead Alloys Tantalum Life Assessment Thin Films Liquid Metal Embrittlement Titanium Alloys Mechanical Behavior: Creep; Fatigue; Fracture Wear Behavior Metallographic Preparation Welding, Joining, Soiidification Microindentation Hardness Zirconium Alloys Microstructural Characterization: Composites Aluminum Alloys Electron Microscopy 5-Phase Precipitation at Low Temperature in a The Application of Scanning Electron Microscopy Duplex-Aged 8090 AI-Li Alloy, 33:11 to Fractography, 33:195 Morphological Studies on B-FeSiAl, Phase in Program for Finding Different Zone Axes in Al-7Si-0.3Mg Alloy with Trace Additions of Be, Transmission Electron Microscopy, 33:403 Mn, Cr, and Co, 33:99 A Scanning Electron Microscopy Study of Laser Coating Microstructures, 33:387 Cast Iron Trace Rotations of Planar Features with Foil Tilting Fatigue Characteristics of Cast Iron, 33:33 on Transmission Electron Micrographs, 32:3 X-Ray Diffraction Characterization of Flake and Use of Scanning Tunneling Microscopy in Compacted Graphite in Cast Iron, 32:127 Metallography, 33:169 Coatings Failure Analysis, Fractography A Scanning Electron Microscopy Study of Laser Analysis of Pipe Failure at the Great Plains Coal Coating Microstructures, 33:387 Gasification Plant, 33:147 Surface Characterization of Hot-Dip Galfan The Application of Scanning Electron Microscopy Coatings, 33:93 to Fractography, 33:195 Failure Analysis and Material Property Copper Alloys Determinations of Small-Diameter Wires, 33:57 Structure and Microhardness of Precipitation/ Failures in Large Gas Turbines Due to Liquid-Metal Dispersion Hardened Cu-Ti-B and Cu-Ti-Si Embrittlement, 33:37 Alloys, 32:97 Fractograpy, NDE, and Fracture Mechanics Applications in Failure Analysis Studies, 33:255 Dispersion Hardening The Fractography of Casting Alloys, 33:275 Structure and Microhardness of Precipitation/ On Fractography of Shallow and Deep HY-100 Dispersion Hardened Cu-Ti-B and Cu-Ti-Si Cracked Bend Specimens, 33:369 Alloys, 32:97 Malfunction and Failure Analysis Investigations of 411 ©Elsevier Science Inc. 1994 MATERIALS CHARACTERIZATION 33:411-414 (1994) 655 Avenue of the Americas, New York, NY 10010 1044-5803 /94/$7.00 Subject Index C26000 (Cu-30% Zn) Brass Cartridge Cases, 32:15 Microindentation Hardness Remote Metallurgical Investigations on Pressure Structure and Microhardness of Precipitation/ Tubes Removed from CANDU Power Reactors, Dispersion Hardened Cu-Ti-B and Cu-Ti-Si 33:51 Alloys, 32:97 Welding Failure Analysis, 33:295 Microstructural Characterization: Composites High Temperature Deformation Preparation of B,;C/Al Composites for Image Grain-Boundary Participation in High- Analysis, 32:35 Temperature Deformation: An Historical Review, 32:59 Microstructural Characterization: Metals Characterization of Phase Transformation Behavior Intermetallics in Electrolytically Produced Indium-Thallium Mechanical Properties and Fracture Mechanism of Shape Memory Alloy Films, 33:311 Ni,Al Intermetallic Produced by Powder Characterization of Tempered Martensite Metallurgy and Standard Melting and Casting Embrittlement Using Hardness Measurement, Processes, 32:89 33:321 Microstructural Characterization of P/M Ni,Al Characterization, Processing, and Alloy Design of Consolidated by HIP, 33:349 NiAI-Based Shape Memory Alloys, 32:139 Room Temperature Fracture of CoAI, 33:187 5-Phase Precipitation at Low Temperature in a Duplex-Aged 8090 Al-Li Alloy, 33:11 Lead Alloys Discontinuous Precipitation Reaction in a Pb- Discontinuous Precipitation Reaction in a Pb- 0.04wt.% Ca Alloy, 33:113 0.04wt.% Ca Alloy, 33:113 Effect of the Lattice Strain on the Thermoelectric Metallography of Soldered Lead and Lead Alloys: Power in a B-Quenched Zr-1.14 wt.%Cr-0.1 The Case of Extruded Alloys, 33:343 wt.%Fe Alloy, 33:3 Measurement of the Compressive Creep Strain Life Assessment Rates of the Individual Phases Within a Lamellar Life Assessment Using Metallographic and Microstructure, 33:377 Mechanical Methods, 32:79 Metallography of Soldered Lead and Lead Alloys: The Case of Extruded Alloys, 33:343 Liquid Metal Embrittlement Microstructural Characterization of Al-Rich Ni-Cr- Failures in Large Gas Turbines Due to Liquid-Metal Al Cast Alloys, 33:135 Embrittlement, 33:37 Morphological Studies on B-FeSiAl, Phase in Al-7Si-0.3Mg Alloy with Trace Additions of Be, Mechanical Behavior: Creep; Fatigue; Fracture Mn, Cr, and Co, 33:99 Anisotropy of Thermal Fatigue Properties of Cold- X-Ray Diffraction Characterization of Flake and Rolled TiNi Sheet, 32:161 Compacted Graphite in Cast Iron, 32:127 Dynamic Recrystallization in Detonating Tantalum Shaped Charges: A Mechanism for Extreme Microstructural Characterization: Nonmetals Plastic Deformation, 33:65 Effect of Additives on the Microstructure and Fatigue Characteristics of Cast Iron, 33:33 Mechanical Properties of Commercial Alumina Fatigue Striation Spacing Analysis, 33:245 Ceramics, 33:329 Measurement of the Compressive Creep Strain Microstructure and Properties of CVD Tungsten Rates of the Individual Phases Within a Lamellar Carbide from Tungsten Hexafluoride and Microstructure, 33:377 Dimethyl Ether, 33:393 Mechanical Properties and Fracture Mechanism of Ni,Al Intermetallic Produced by Powder Modeling Metallurgy and Standard Melting and Casting Continuum Model for Predicting Macrosegregation Processes, 32:89 in Dendritic Alloys, 32:287 Mechanical Properties and Shape Memory of Dislocation Motion in Random and Nonrandom Porous Nitinol, 32:179 (fcc) Solid Solutions, 32:275 Metallurgical Mechanism for Corrosion-Fatigue Microstructural Evolution in Thin Films, 32:257 (Circumferential) Crack Initiation and Microstructural Models for Quantitative Analysis Propagation in Cr-Mo Boiler Tube Steels, 33:45 of Grains and Second-Phase Particles, 33:175 Radiation-Induced Segregation in Multicomponent Metallographic Preparation Alloys: Effect of Particle Type, 32:239 Preparation of B,C/Al Composites for Image Analysis, 32:35 Nickel Alloys Technique for Mounting SiC Fibers for Cross- Microstructural Characterization of Al-Rich Ni-Cr- Sectional Microscopic Examination, 33:75 Al Cast Alloys, 33:135 Subject Index 413 Oxidation, Corrosion, Environmental Interactions Shape Memory Effect and Related Phenomena ina Metallurgical Evaluation of Stress Corrosion Microalloyed Fe-Mn-Si Alloy, 32:215 Cracking in Large Diameter Piping, 32:25 Structural Changes of Cu-Zn-Al Shape Memory A Metallurgical Mechanism for Corrosion-Fatigue Alloys During Martensite Aging Determined by (Circumferential) Crack Initiation and the ALCHEMI Method, 32:205 Propagation in Cr-Mo Boiler Tube Steels, 33:45 Structural Transitions in a TiNiFe Shape Memory Alloy, 32:189 Phase Transformations Effect of yee Cyclic Transformations on the Shape Stress Corrosion Cracking Memory Characteristics of an Fe-Mn-Si-Cr-Ni Metallurgical Evaluation of Stress Corrosion Alloy, 32:229 Cracking in Large Diameter Piping, 32:25 Structural Changes of Cu-Zn-Al Shape Memory Alloys During Martensite Aging Determined by Tantalum the ALCHEMI Method, 32:205 Study of Tantalum-Sintered Anodes, 32:119 Structural Transitions in a TiNiFe Shape Memory Alloy, 32:189 Thin Films Microstructural Evolution in Thin Films, 32:257 Powder Metallurgy Investigation of the Effect of Powder Particle Size Titanium Alloys Distribution on the Powder Microstructure and Characterization of Solid-Phase Welds Between Mechanical Properties of Consolidated Material Ti6Al-2Sn-4Zr-2Mo-0.1Si and Ti-13.5A1-21.5Nb Made from a Rapidly Solidified Al-Fe-Ce Alloy Titanium Aluminide, 33:357 Powder. Part I. Powder Microstructure, 33:119 Investigation of the Effect of Powder Particle Size Wear Behavior Distribution on the Powder Microstructure and Wear Behavior and Tool Life of Modified WC- Mechanical Properties of Consolidated Material Based Cemented Carbides, 32:41 Made from a Rapidly Solidified Al-Fe-Ce Alloy Powder. Part II. Mechanical Properties, 33:129 Welding, Joining, Solidification Characteristics of the Weld Interface in Dissimilar Quantitative Metallography Austenitic-Pearlitic Steel Welds, 33:87 Applications of Cluster Analysis in the Quantitative Characterization of Solid-Phase Welds Between Estimation of Similarities in Geometrical Ti6Al-2Sn-4Zr-2Mo-0.1Si and Ti-13.5Al-21.5Nb Characteristics of Grains in Polycrystalline Titanium Aluminide, 33:357 Materials, 32:105 Defect Characterization in Pipe-to-Pipe Welds in Microstructural Models for Quantitative Analysis Large-Diameter Stainless-Steel Piping, 33:155 of Grains and Second-Phase Particles, 33:175 Effect of High-Temperature Exposure on the Structure of Inertia-Friction Welds in RS/PM Remote Metallography AL-8.5FE1.3V-1.7SI, 32:51 Remote Metallurgical Investigations on Pressure Metallography of Soldered Lead and Lead Alloys: Tubes Removed from CANDU Power Reactors, The Case of Extruded Alloys, 33:343 33:51 The Structure of the Heat-Affected Zone in Welds of a Ni-29 wt.% Mo Commercial Alloy (Hastelloy Shape Memory Alloys B2), 33:21 Anisotropy of Thermal Fatigue Properties of Cold- Welding Failure Analysis, 33:295 Rolled TiNi Sheet, 32:161 Characterization of the Deposition and Materials Zirconium Alloys Parameters of Thin-Film TiNi for Microactuators Effect of the Lattice Strain on the Thermoelectric and Smart Materials, 32:169 Power in a B-Quenched Zr-1.14 wt.%Cr-0.1 Characterization, Processing, and Alloy Design of wt.%Fe Alloy, 33:3 NiAI-Based Shape Memory Alloys, 32:139 Effect of ye Cyclic Transformations on the Shape Book Reviews, New Books Memory Characteristics of an Fe-Mn-Si-Cr-Ni Ceramic Metal Composites, 33:85 Alloy, 32:229 Creep and Fracture of Engineering Materials and Fabrication of Cu-Al-Ni-Mn Shape Memory Alloy, Structure, 33:79 32:195 An Introduction to Metal Matrix Composites, 33:83 Mechanical Properties and Shape Memory of Introduction to Scanning Tunneling Microscopy, 33:85 Porous Nitinol, 32:179 Mathematical Modelling for Materials Processing, 33:85 The Shape Memory Capability and Life of Cu-Al- The Rietveld Method, 33:85 Be-X Alloys, 33:163 414 Subject Index The Science and Practice of Welding, Vol 2: The Practice Editorials of Welding, 10th ed., 33:81 Computer Modeling and Microstructures, 32:237 Spin Glasses, 33:85 An Important Affiliation, 32:1 A Working Party Report on Microbiological Memory Metals, 32:137 Degradation of Materials and Methods of Protection, Metallography and Failure Analysis, 33:193 33:407 Welcome to a New Editor, 33:1