Journal of Testing and Evaluation 2006: Vol 34 Index

2006·5.7 MB·English

Journal of Testing and Evaluation
Author Index to Volume 34
2006
Fahmi, and Garcia, Eric: An Efficient Chen, Jianbin, and Zhou, Liyun: On the
Number Month of Issue Pages DCT-Based Cryptocompression Scheme Frequency Response of Model Materials in
for a Secure and Authentic Medical Image Hydrotechnics, Sept., 405
l January 1-77 Transmission, Nov., 459
2 March 79-152 Chiemeke, S. C.: see Akinyokun, O. C.
see Kammoun, Fahmi
3 May 153-259 Chiu, Chui-Te, and Lewis, A. J. N.: A
4 July 261-372 Study on Properties of Foamed-Asphalt-
5 September 373-458 Treated Mixes, Jan., 5
c
6 November 459-576 Chiu, Chui-Te, and Lee, Ming-Gin: Ef-
Cambiaghi, Danilo, Magalini, Andrea, fectiveness of Seal Rejuvenators for Bitu-
Ramorino, Giorgio, Riccd, Theonis, and minous Pavement Surfaces, Sept., 390
Vetturi, David: High Frequency Dynamic
A Testing of Rubbers and Rubber to Metal Choi, Ildong, Lee, Sungbok, Matlock,
David K., and Speer, John G.: Strain Con-
Abril, Eduardo R.: The Influence of Initial Devices, May, 211 trol during High Speed Tensile Testing,
Crack Length on Critical Stress Intensity Carassou, Sébastien: see Sainte Catherine, Sept., 443
Factor K,, Sept., 430 Claude
Chua, Patrick S. K.: see Chen, H. X.
Aiban, Saad Ali: Utilization of Steel Slag Casari, Francesco, Tassan, Marco, Mes-
Aggregate for Road Bases, Jan., 65 sina, Angelo, and Molinari, Alberto: Ef- Cortez, Edel R.: see Chen, Dar-Hao
Akinyokun, O. C., and Chiemeke, S. C.: fect of Punch Diameter, Grid Dimension,
IT Projects Performance Indices and and Lubrication on Forming Limit D
Evaluation, Nov., 515 Diagram, Jan., 24 Dhawan,A . K.: see Tewatia, Sudhir Kumar
Anggit, Murdani: see Makabe, Chobin Castelblanco, Adhara: see Masad, Eyad Dhingra, Anoop K.: see Hidalgo, Juan |
Arends, Sabine: see Konnert, Andrea Chang, Jia-Ruey, Chang, Kuan-Tsung, Ding, Su Hua, and Liu, Da Zhuang: Ac-
and Chen, Dar-Hao: Application of 3D
Aripaka, Surekha N.: see Srinivasan, Laser Scanning on Measuring Pavement celerated Aging on Sealants and a Quantifi-
Malur N cational Way to Evaluate the Durability,
Roughness, March, 83
March, 79
Arslan, Haydar, and Baykal, Gokhan: Chang, Kuan-Tsung: see Chang, Jia-Ruey
Analyzing the Crushing of Granular Mate-
rials by Sound Analysis Technique, Nov., Chang, Meng-Kung: see Chen, Jian-Shiuh E
464 Chang, Young-Fo, and Hsu, Huang-I: U]- Earthman, J. C.: see Lincoln, J. D.
trasonic Synthetic Aperture Imaging for
Edalati, K., Rokrok, B., Kermani, A.,
Correcting the Refraction Artifacts Applied
Seiedi, M., Movafeghi, A., and Rastkhah,
Auras, Rafael, Singh, Sher Paul, and to Angle Beam Immersion Testing, Jan., 60 N.: Sensitivity Evaluation in Double Wall
Singh, Jagjit: Performance Evaluation of Chen, Chun, Tayebali, Akhtarhusein A.., Radiography of Pipes and Multilayer Plates
PLA against Existing PET and PS and Knappe, Detlef R. U.: A Procedure to by Assessment the Monte Carlo Simulation,
Containers, Nov., 530 Quantify Organic Antistrip Additives in As- Nov., 562
phalt Binders and Mixes, July, 269
Elzafraney, Mohamed, and Soroushian,
Chen, Dar-Hao: see Chang, Jia-Ruey Parviz: Testing Techniques and Tools to
B
Determine Properties of Fiber-Reinforced
Chen, Dar-Hao, Zhou, Fujie, and Cortez,
Baykal, Gokhan: see Arslan, Haydar Rods, March, 135
Edel R.: Determination of Load Damage
Beeson, Harold: see Hirsch, David Relationships through Accelerated Pave-
F
ment Testing, July, 312
Berding, Christoph: see Konnert, Andrea
Chen, H. X., Lim, G. H., and Chua, Fielden, D.: see Tian, H,
Bian, Haitao: see Hsu, Cheng-Tzu Thomas
Patrick S. K.: Fault Detection in a Water
Filho, Waldek W. Bose: see Milan, Marcelo
Birgisson, Bjorn: see Masad, Eyad Hydraulic Motor Using a Wavelet
!
Transform, July, 342
Bose, Pratima Rani: see Tewatia, Sudhir
Fink, James: see Ma, Li
Kumar Chen, Jian-Shiuh, Chang, Meng-Kung,
and Lin, Kuei-Yi: Device Harmonization Fourati, Wiem: see Kammoun, Fahmi
see Tewatia, Sudhir Kumar
to Determine Smoothness Specification for
Fox, Amy, and Moore, Mary Ann: Effects
Bouchard, R.: see Xu, S. Asphalt Pavements, Sept., 383
of Laundering on Environmentallylm-
Bouhlel, Mohamed Salim, Kammoun, Chen, Jianbin: see Zhou, Liyun proved and Classic Denim Fabrics, May,
578 JOURNAL OF TESTING AND EVALUATION
18] Hwang, Ii Soon: see Oh, Young Jin C.: Hot Wire Method to Characterize the Lov
Thermal Conductivity of Particle-Filled
Polymer Grouts Used in Pipe-in-Pipe
G J Application, May, 224
Garcia, Eric:s ee Bouhlel, Mohamed Salin Jarimopas, Bundit: see Singh, S. Paul Kumar, M., and Gupta, A. Venkateswara:
\ Simple Noncontact Displacement Mea-
Garza, L. G., and Van Tyne, C. J.: A Di Ji, Vincent: see Zhang, Jian-Min
suring System for Online Bubble Height Me
tal Image Processing Technique for Quanti
fication of Surface Hot-Shortness Cracks Jia, Yongxin: see Hsu, Cheng-Tzu Thomas Measurement during Polymer Bubble Infla- Eff
tion at Elevated Temperature, July, 275 Ind
Jan., | Johnson, Charles G.: see Urbanik, Thomas
Me
] Kumaran, Mavinkal K., Lackey, John C.,
Gayathri,V. : see Kaniraj, Shenbaga R
Normandin, Nicole, and van Reenen,
Gopalakrishnan, Kasthurirangan, Th- Joyce, James A., Tregoning, R. L., and David: Vapor Permeances, Air Permeances,
ompson, Marshall R., and Manik, Anshu: Roe, C.: On Setting Testing Rate Limita- and Water absorption Coefficients of Build-
Multi-Depth Deflectometer Dynamic Re tions for the Master Curve Reference Tem- ing Membranes, May, 241 M:
sponse Measurements under Simulated perature, 7,,, of ASTM E 1921, March, 121 os
New Generation Aircraft Gear Load ee Oh, Young Jin Kumaran, Mavinkal K., Lackey, John C., For
Normandin, Nicole, Tariku, Fitsum, and
Nov., 522 Pat
van Reenen, David: Heat, Air and Moisture
Gracio, José: see Ochsner, Andreas Transport Properties of Three North Ameri- wil
kK can Stuccos, July, 351
Graefe, Wolfgang: The Activation E1
of the Static Fatigue (Creep of St Kalny, Ondrej, Peterman, Robert J., and
March, 143 Huang, Chune: Story of MEGADA V M:
Gupta, A. Venkateswara: see Kumat Ksieteiopni ngH ar2d0w0a-rCeh anRnuenln inLge gabcyy DeDvateal opAicnqgu i-a Lackey, John C.: see Kumaran, Mavinkal Ka
New Software Interface, May, 2<511 K M:
H Kamat, S. V., Srinivas, M., and Rama see Kumaran, Mavinkal K M:
Rao, P.: On Measuring Mixed Mode V/Ill Landes, John D.: Evaluation of the ASTM Pa
Hafez Haghighat, S. M., and Taheri, A.
Fracture Toughness of Ductile Materials J Initiation Procedure Using the EURO
Karimi: Evaluation of the Simulated Mat
Using the Critical Stretch Zone Width, Fracture Toughness Data Set, May, 200
rial Microstructures Using the Image P
March, I11
cessing and Image Analyzing Method Lao, Weikang: see Zhou, Liyun
Nov.. 507 Kammoun, Fahmi: see Bouhlel, Mohamed
Le Boulch, David: see Sainte Catherine,
Salim
Hao, Peiwen, and Liu, HongYing: A
Laboratory Study of the Effect Kammoun, Fahmi, Fourati, Wiem, and
Lee, Ming-Gin: see Chiu, Chui-Te
Various Additives on Moisture Suscept Bouhlel, Mohamed Salim: Comparative
ity of Asphalt Mixtures, July, 2¢ Survey of the DCT and the Wavelet Trans- Lee, Sung K.: see Urbanik, Thomas J
forms for Image Compression, Nov., 484
Hao, Peiwen, and Liu, Hongying: Lee, Sungbok: see Choi, Iidong
of Bitumen Acid Number on Moisture Su Kaniraj, Shenbaga R., and Gayathri, V.:
Lee, Yung-Li, and Lu, Ming-Wei:
ceptibility of Asphalt Mixtures, Jul ) Behavior of Fiber-Reinforced Cement
Damage-Based Models for Step-Stress Ac
Stabilized Fly Ashes, July, 290
Hashida, Toshiyuki: see Sato, Ka celerated Life Testing, Nov., 494
Kao, Mu-Jung, Tien, Der-Chi, Ting,
Hidalgo, Juan I., and Dhingra, Anoop K.: Lemaignan, Clément: see Sainte Cathe-
Chen-Ching, and Tsung, Tsing-Tshih:
High-Speed Balancing f Rotor rine, Claude
Hydrophilic Characterization of Automo
Overhangs: When is Overhar Lik
tive Brake Fluid, Sept., 400 Lewis, A.J . N.: see Chiu, Chui-Te
Cause Problems?, May, 218
Kawada, Tatsuya: see Sato, Kazuhisa Li, Ming: Experimental Stability Analysis
Hirsch, David, and Beeson, Harold: So
of a Test System for Doing Fatigue Tests un
Issues Related to the Selection of Pt Kermani, A.: see Edalati, K
der Random Loading, July, 364
for Aerospace Oxygen Systems, Ja 6
Khoury, Naji, and Zaman, Musharraf:
Liaw, P. K.: see Tian, H
Hsu, Cheng-Tzu Thomas, Punurai, Won- Durability Effects on Flexural Behavior of
siri, Jia, Yongxin, and Bian, Haitao: D Fly Ash Stabilized Limestone Aggregate Lim, G. H.: see Chen, H. X
rect Shear Behavior of Carbon Fil May, 167
Lin, Kuei-Yi: see Chen, Jian-Shiuh
Reinforced Polymer Laminates ind
Kirkham, M. J.: see Tian, H
Concrete, May, 158 Lincoln, J. D., Rieger, L. E., and Earth-
Knappe, Detlef R. U.: see Chen, Chun man, J. C.: Instrumentation for Determin
Hsu, Huang-I: see Chang, Young-Fo
ing the Local Damping Capacity in Honey
Huang, Chune: see Kalny, Ondrej Konnert, Andrea, Berding, Christoph, comb Sandwich Composites, May, 293229
Arends, Sabine, Parvin,‘Curt, Rohlfing,
Huang, Shin-Che: see Zeng, Mei Curt L., Wiedmeyer, Hsiao-Mei, Little, Little, Randie: see Konnert, Andrea
Randie, Siebelder, Caria, and Weykamp,
Hughes, Elaine M., and Mackes, Kurt H.: Liu, Da Zhuang: see Ding, Su Hua
Cas: Statistical Rules for Laboratory
Developing a Geographical Informatio:
Networks, Marc 1 128 Liu, HongYing: see Hao, Peiwen
System Database and Spatial Analysis for
Forest Biomass Resource Assessment, May Krishnaiah, S., and Singh, D. N.: Determi- Liu, Hongying: see Hao, Peiwen
153 nation of Thermal Properties of Soils in a
Ljustell, Par, and Nilsson, Fred: Effectso f
Geotechnical Centrifuge, July, 319
Husovié, T. Volkov: Thermal Stability Test Different Load Schemes on the Fatigue
ing of Refractory Specimen, Nov., 570 Kulkarni, Sujan P., and Vipulanandan, Crack Growth Rate, July, 333
AUTHOR INDEX 579
Low, Samuel R.: see Ma, Li O Sato, Kazuhisa, Omura, Hajime,
Hashida, Toshiyuki, Yashiro, Keiji, Yu-
Lu, Ming-Wei: see Lee, Yung-Li Ochsner, Andreas, and Gracio, José: On
gami, Hiroo, Kawada, Tatsuya, and Mi-
the Thick-Adherend Tensile Shear Test of
zusaki, Junichiro: Tracking the Onset of
Adhesive Technology—Limitations and
Damage Mechanism in Ceria-Based Solid
Correction Methods, Jan., 53
M Oxide Fuel Cells under Simulated Operat-
Oh, Young Jin, Hwang, Il Soon, and ing Conditions, May, 246
Ma, Li, Low, Samuel R., and Fink, James:
Joyce, James A.: Round Robin Test on Nor-
Effects of Steel and Tungsten Carbide Ball Seiedi, M.: see Edalati, K
malization Method under Static Loading
Indenters on Rockwell Hardness
Condition, Nov., 537 Seif, Mohamed A., and Rawwash,
Measurements, May, 187
Mohammad: Surface Roughness Measure-
Omura, Hajime: see Sato, Kazuhisa
Mackes, Kurt H.: see Hughes, Elaine M. ment Using Laser Speckle Statistical
Analysis, Sept., 410
Magalini, Andrea: see Cambiaghi, Danilo P
Siebelder, Carla: see Konnert, Andrea
Makabe, Chobin, Anggit, Murdani, Suey- Palma, Ernani Sales, and Martins, Mar-
oshi, Toshiyasu, and Yafuso, Tateki: The cio Geraldo Magela: Durability Test Silva, Caue P. O.: see Milan, Marcelo T.
Formation Mechanism of the Factory-Roof Analysis in a Passenger Vehicle Damper Singh, D. N.: see Krishnaiah, S.
Pattern in a Torsional Fatigue Specimen Spring Tower, Nov., 504
with Circumferential Notch, Sept., 423 Singh, Jagjit: see Auras, Rafael
Parvin, Curt: see Konnert, Andrea
Malafaia, Artur M. S.: see Milan, Marcelo Singh, P. Johan, and Mannan, S. L.: Ex-
lr. Pelizer, Breno C.: see Milan, Marcelo T perimental Determination of Fatigue Crack
Closure in 316 (N) Weld Using a Global
Manik, Anshu: see Gopalakrishnan, Peterman, Robert J.: see Kalny, Ondrej
CMOD Method, March, 98
Kasthurirangan Pircher, Martin: Testing of Rock Climbing
Singh, S. Paul, Jarimopas, Bundit, and
Mannan, S. L.: see Singh, P. Johan Anchors, Sept., 416
Saengnil, Wasan: Measurement and Analy-
Martins, Marcio Geraldo Magela: see Punurai, Wonsiri: see Hsu, Cheng-Tzu sis of Vibration Levels in Commercial
Palma, Ernani Sales Thomas Truck Shipments in Thailand and Its Impact
on Packaged Produce, March, 104
Masad, Eyad, Castelblanco, Adhara, and
Birgisson, Bjorn: Effects of Air Void Size R Singh, Sher Paul: see Auras, Rafael
Distribution, Pore Pressure, and Bond En- Ramalingam, Krishnamurthy: see Ven- Sisson, Roland: see Tarefder, Rafiqul Alam
ergy on Moisture Damage, Jan., 15 kataraman, R.
Soroushian, Parviz: see Elzafraney,
Matlock, David K.: see Choi, Iidong Rama Rao, P.: see Kamat, S. V. Mohamed
Meged, Y.: On the Anomaly of Cumulative Ramasubramanian, Natesan: see Sainte Speer, John G.: see Choi, Ildong
Erosion and Abrasion-Time Curves, Jan., Catherine, Claude
42 Splett,J .D ., and Wang, C. M.: Uncertainty
Ramorino, Giorgio: see Cambiaghi, in Reference Values for the Charpy V-Notch
Meged, Y.: Shot-Peening Effects on Metal Danilo Verification Program, May, 293277
Erosion, July, 357
Rastkhah, N.: see Edalati, K. Srinivas, M.: see Kamat, S. V.
Mesloh, Charles T., and Thompson, L.
Frank: Evaluation of the FN 303 Less Le- Rawwash, Mohammad: see Seif, Mo- Srinivasan, Malur N., and Aripaka,
thal Projectile, Nov., 574 hamed A. Surekha N.: Consolidation of Mechani-
Messina, Angelo: see Casari, Francesco Riccd, Theonis: see Cambiaghi, Danilo cally Alloyed Titanium Silicide using
Polycarbosilane, Jan., 11
Milan, Marcelo T., Filho, Waldek W. Rieger, L. E.: see Lincoln, J. D.
Sueyoshi, Toshiyasu: see Makabe, Chobin
Bose, Malafaia, Artur M. S., Pelizer, Roe, C.: see Joyce, James A.
Breno C., and Silva, Caue P. O.: Slot Ma- 1
chining Effects on Residual Stress Mea- Rohlfing, Curt L.: see Konnert, Andrea
surements Using the Crack Compliance Rokrok, B.: see Edalati, K Taheri,A . Karimi: see Hafez Haghighat, S
Method, March, 149 : M
i
Mizusaki, Junichiro: see Sato, Kazuhisa — Tarefder, Rafiqul Alam, Zaman, Mushar-
raf, Sisson, Roland, and_ Ting,
Molinari, Alberto: see Casari, Francesco Saengnil, Wasan: see Singh, S. Paul
Cheong-Fung: Field and Laboratory Prop-
Moore, Mary Ann: see Fox, Amy Sainte Catherine, Claude, Le Boulch, erties of Lime-Treated Cold In-Place Re-
David, Carassou, Sébastien, Ramasubra- cycled Asphalt Pavements, Jan., 31
MovafeghiA,. : see Edalati, K
manian, Natesan, and Lemaignan,
Tariku, Fitsum: see Kumaran, Mavinkal
Clément: An Internal Conical Mandrel K. ‘
Technique for Fracture Toughness Measure-
N ments on Nuclear Fuel Cladding, Sept., 373 Tassan, Marco: see Casari, Francesco
Nilsson, Fred: see van Eeten, Paul Sampath Kumar,T . S.: see Venkataraman, Tayebali, Akhtarhusein A.: see Chen,
R. Chun
see | justell, Par
Santarelli, Edgardo L.: A Two-Parameter Tewatia, Sudhir Kumar, Dhawan, A. K..,
Normandin, Nicole: see Kumaran, Ma-
Method for Determining the Fracture Venkatachalam, K., and Bose, Pratima
vinkal K
Toughness of Materials from Subsized Rani: An Alternative to a 3D Crack
see Kumaran, Mavinkal K. Specimens, July, 280 Monitor—4—Pin Algorithm, Sept., 437
580 JOURNAL OF TESTING AND EVALUATION
y
Tewatia, Sudhir Kumar, and Bose, Pra- van Reenen, David: see Kumaran, Ma-
tima Rani: Discussion on “A Study on the vinkal K
Yafuso, Tateki: see Makabe, Chobin
Beginning of Secondary Compression of
see Kumaran, Mavinkal K
Soils” by R. G. Robinson, Sept., 453 Yashiro, Keiji: see Sato, Kazuhisa
Van TyneC., J .: see Garza, L.G
Thompson, L. Frank: see Mesloh, Charles Yugami, Hiroo: see Sato, Kazuhisa
I Venkatachalam, K.: see Tewatia, Sudhir
Kumar
Thompson, Marshall R.: see Gopalakrish
nan, Kasthurirangan Venkataraman, R., Sampath Kumar, T.
S., and Ramalingam, Krishnamurthy:
Tian, H., Fielden, D., Kirkham, M. J., and Z
Evaluation of Adhesive Strength of Thin
Liaw, P. K.: Control of Noise and Specimen
Plasma Sprayed Oxide Coatings by a Cross- Zaman, Musharraf: see Tarefder, Rafiqul
Temperature During |! kHz Fatigue
hatch Testing Method, Sept., 440 Alam
Experiments, March, 92
Vetturi, David: see Cambiaghi, Danilo see Khoury, Naji
Tien, Der-Chi: see Kao, Mu-Jung
Vipulanandan, C.: see Kulkarni, Sujan P. Zeng, Menglan, and Huang, Shin-Che:
ling, Chen-Ching: see Kao, Mu-Jung
Characterizing the Asphalt-Aggregate Mix-
Ting, Cheong-Fung: see Tarefder, Rafiqul tures Using Rheological Properties of As-
Alam phalt Binders, Nov., 471
Ww
Tregoning, R. L.: see Joyce, James A Zhang, Jian-Min, Xu, Ke-Wei, and Ji,
Wang, C. M.: see Splett, J. D
Vincent: Evaluation of Residual Stress in
Tsung, Tsing-Tshih: see Kao, Mu-Jung
Weykamp, Cas: see Konnert, Andrea Fiber-Textured Films by X-Ray Diffraction,
Tyson,W . R.: see Xu, S Sept., 395
Wiedmeyer, Hsiao-Mei: see Konnert, An-
t drea Zhou, Fujie: see Chen, Dar-Hao
Urbanik, Thomas J., Lee, Sung K., and Zhou, Liyun, and Chen, Jianbin: Me-
Johnson, Charles G.: Column Compres- chanical Principles of a New Two-Way
sion Strength of Tubular Packaging Forms X Composite Disk Spring Cap for Pile
Made from Paper, Nov., 477 Driving, July, 368
Xu, Ke-Wei: see Zhang, Jian-Min
\ see Chen, Jianbin
Xu, S., Bouchard, R., and Tyson, W. R.:
van Eeten, Paul, and Nilsson, Fred: Con Effects of Available Energy and Impact Zhou, Liyun, and Lao, Weikang: Studying
stant and Variable Amplitude Cyclic Plas Rate on Charpy Absorbed Energy in the of the Dynamic Behavior of Pile Cushion
ticity in 316L Stainless Steel, July, 298 Upper Shelf, May, 176 ing Materials in Pile Driving, Sept., 447
Journal of Testing and Evaluation
Subject Index to Volume 34
2006
A Ramalingam), Sept., 440 Forest Biomass Resource Assessment
(Elaine M. Hughes and Kurt H. Mackes),
A515 structural steel Adhesive technology
May, 153
On Setting Testing Rate Limitations for the On the Thick-Adherend Tensile Shear Test
Master Curve Reference Temperature, 7.,,, of Adhesive Technology—Limitations and Alternative theory of fracture mechanics
of ASTM E 1921 (James A. Joyce, R. | Correction Methods (Andreas Ochsner and The Influence of Initial Crack Length on
Tregoning, and C. Roe), March, 121 José Gracio), Jan., 53 Critical Stress Intensity Factor K, (Eduardo
R. Abril), Sept., 430
Abrasion Aerospace materials
On the Anomaly of Cumulative Erosion and Some Issues Related to the Selection of Angle beam immersion testing
Abrasion-Time Curves (Y. Meged), Jan., 42 Polymers for Aerospace Oxygen Systems Ultrasonic Synthetic Aperture Imaging for
(David Hirsch and Harold Beeson), Jan., 76 Correcting the Refraction Artifacts Applied
Accelerated aging
to Angle Beam Immersion _ Testing
Accelerated Aging on Sealants and a Quan- Aggregate
tificational Way to Evaluate the Durability Effect of Bitumen Acid Number on Mois- O(ravaYt oung-Fo Chang and Huang-I Hsu), Jan.,
(Su Hua Ding and Da Zhuang Liu), March, ture Susceptibility of Asphalt Mixtures
79 (Peiwen Hao and Hongying Liu), July, 327 Anomalous curve
Accelerated pavement testing Aggregate bases On the Anomaly of Cumulative Erosion and
Determination of Load Damage Relation- Durability Effects on Flexural Behavior of \brasion- Time Curves (Y. Meged), Jan., 42
ships through Accelerated Pavement Fly Ash Stabilized Limestone Aggregate Antistrip additive
Testing (Dar-Hao Chen, Fujie Zhou, and (Naji Khoury and Musharraf Zaman), May, A Procedure to Quantify Organic Antistrip
Edel R. Cortez), July, 312 167 Additives in Asphalt Binders and Mixes
Aggregates (Chun Chen, Akhtarhusein A. Tayebali, and
Acceptance smoothness level Hot Wire Method to Characterize the Ther- Detlef R. U. Knappe), July, 269
Device Harmonization to Determine
Smoothness Specification for Asphalt mal Conductivity of Particle-Filled Polymer Asphalt binder
Pavements (Jian-Shiuh Chen, Meng-Kung Grouts Used in Pipe-in-Pipe Application A Procedure to Quantify Organic Antistrip
Chang, and Kuei-Yi Lin), Sept., 383 (Sujan P. Kulkarni and C. Vipulanandan), Additives in Asphalt Binders and Mixes
May, 224
(Chun Chen, Akhtarhusein A. Tayebali, and
Accuracy Aging rate Detlef R. U. Knappe), July, 269
Evaluation of the FN 303 Less Lethal Accelerated Aging on Sealants and a Quan- Characterizing the Asphalt-Aggregate Mix-
Projectile (Charles T. Mesloh and L. Frank tificational Way to Evaluate the Durability tures Using Rheological Properties of As-
Thompson), Nov., 574 (Su Hua Ding and Da Zhuang Liu), March phalt Binders (Menglan Zeng and Shin-Che
719 Huang), Nov., 471
Acoustic emission
Tracking the Onset of Damage Mechanism Air barrier Asphalt mixes
in Ceria-Based Solid Oxide Fuel Cells un- Vapor Permeances, Air Permeances, and \ Procedure to Quantify Organic Antistrip
der Simulated Operating Conditions (Kazu- Water absorption Coefficients of Building Additives in Asphalt Binders and Mixes
hisa Sato, Hajime Omura, Toshiyuki Membranes (Mavinkal K. Kumaran, John (Chun Chen, Akhtarhusein A. Tayebali, and
Hashida, Keiji Yashiro, Hiroo Yugami, Tat C. Lackey, Nicole Normandin, and David Detlef R. U. Knappe), July, 269
suya Kawada, and Junichiro Mizusaki), van Reenen), May, 241
May, 246 Asphalt mixture
Air permeability \ Laboratory Study of the F.ffectiveness of
Activation energy Heat, Air and Moisture Transport Properties Various Additives on Moisture Susceptibil-
The Activation Energy of the Static Fatigue of Three North American Stuccos (Ma ity of Asphalt Mixtures (Peiwen Hao and
(Creep of Steel) (Wolfgang Graefe), March, vinkal K. Kumaran, John C. Lackey, Nicole Hong Ying Liu), July, 261
143 Normandin, Fitsum Tariku, and David van
Asphalt pavement
Reenen), July, 351
Adhesive shear properties Field and Laboratory Properties of Lime-
On the Thick-Adherend Tensile Shear Test Air permeance [reated Cold In-Place Recycled Asphalt
of Adhesive Technology—Limitations -and Vapor Permeances, Air Permeances, and Pavements (Rafiqul Alam Tarefder, Mush-
Correction Methods (Andreas Ochsner and Water absorption Coefficients of Building arraf Zaman, Roland Sisson, and Cheong
José Gracio), Jan., 53 Membranes (Mavinkal K. Kumaran, John Fung Ting), Jan., 31
C. Lackey, Nicole Normandin, and David
Adhesive strength measurements Asphalt-aggregate mixture
van Reenen), May, 241
Evaluation of Adhesive Strength of Thin Characterizing the Asphalt-Aggregate Mix-
Plasma Sprayed Oxide Coatings by a Cross- Alternative fuel tures | sing Rheological Properties of As-
hatch Testing Method (R. Venkataraman, T Developing a Geographical Information phalt Binders (Menglan Zeng and Shin-Che
S. Sampath Kumar, and Krishnamurthy System Database and Spatial Analysis for a Huang), Nov., 471
582 JOURNAL OF TESTING AND EVALUATION
ASTM C 633 (Peiwen Hao and Hongying Liu), July, 327 der Simulated Operating Conditions (Kazu Cor
Evaluation of Adhesive Strength of Thin hisa Sato, Hajime Omura, Toshiyuki Me
Bitumen acid number
Plasma Sprayed Oxide Coatings by a Cross Hashida, Keiji Yashiro, Hiroo Yugami, Tat- Cor
Effect of Bitumen Acid Number on Mois-
hatch Testing Method (R. Venkataraman, | suya Kawada, and Junichiro Mizusaki), Dri
ture Susceptibility of Asphalt Mixtures
S. Sampath Kumar, and Krishnamurthy May. 246 July
(Peiwen Hao and Hongying Liu), July, 327
Ramalingam), Sept., 440
CFRP laminates Cor
Bituminous pavement
ASTM D 3359 Direct Shear Behavior of Carbon Fiber- Exy
Effectivenesso f Seal Rejuvenators for Bitu-
Evaluation of Adhesive Strength of Thin Reinforced Polymer Laminates and Cra
minous Pavement Surfaces (Chui-Te Chiu
Plasma Sprayed Oxide Coatings by a Cross Concrete (Cheng-Tzu Thomas Hsu, Wonsiri Glo
and Ming-Gin Lee), Sept., 390
hatch Testing Method (R. Venkataraman, 1 Punurai, Yongxin Jia, and Haitao Bian
S. Sampath Kumar, and Krishnamurthy Biunting line May, 158
Ramalingam), Sept., 440 On Measuring Mixed Mode I/III Fracture Co
loughness of Ductile Materials Using the Characteristics Per
ASTM E 1820 Critical Stretch Zone Width (S. V. Kamat, Testing Techniques and Tools to Determine IStl
Evaluation of the ASTM J Initiation Proce M. Srinivas, and P. Rama Rao), March, 111 Properties of Fiber-Reinforced Rods (Mo- ras.
dure Using the EURO Fracture Toughness hamed Elzafraney and Parviz Soroushian), No
Data Set (John D. Landes), May, 200 Brake oil March, 135 Co
Hydrophilic Characterization of Automo-
Automatic prewarning system Col
tive Brake Fluid (Mu-Jung Kao, Der-Chi Charpy
Hydrophilic Characterization of Automo Pac
Tien, Chen-Ching Ting, and Tsing-Tshih Effects of Available Energy and Impact
tive Brake Fluid (Mu-Jung Kao, Der-Chi ma
rsung), Sept.. 400 Rate on Charpy Absorbed Energy in the
Tien, Chen-Ching Ting, and Tsing-Tshih G
Upper Shelf (S. Xu, R. Bouchard, and W. R
Tsung), Sept., 400 Breaking elongation
Iyson), May, 176 Co
Effects of Laundering on Environmentally-
Automotive tests Bel
Durability Test Analysis in a Passenger Ve Improved and Classic Denim Fabrics (Amy Charpy V-notch Sta
hicle Damper Spring Tower (Ernani Sales Fox and Mary Ann Moore), May, 181 Uncertainty in Reference Values for the anc
Palma and Marcio Geraldo Magela Breaking strength Charpy V-Notch Verification Program (J. D
Martins), Nov., 504 Effects of Laundering on Environmentally- Splett and C. M. Wang), May, 237
Available energy Improved and Classic Denim Fabrics (Amy Chemical interaction
Effects of Available Energy and Impact Fox and Mary Ann Moore), May, 181 Performance Evaluation of PLA against Ex
Rate on Charpy Absorbed Energy in the Bubble inflation isting PET and PS Containers (Rafael Au-
Upper Shelf (S. Xu, R. Bouchard, andW . R \ Simple Noncontact Displacement Mea ras, Sher Paul Singh, and Jagjit Singh)
Tyson), May, 176 suring System for Online Bubble Height Nov.. 530 P te :
Axial piston motor Measurement during Polymer Bubble Infla- Circumferential notch
tion at Elevated Temperature (M. Kumai
Fault Detection in a Water Hydraulic Moto ac The Formation Mechanism of the Factory
and A. Venkateswara Gupta), July, 275
Using a Wavelet Transform (H. X. Chen, G Roof Pattern in a Torsional Fatigue Speci
H. Lim, and Patrick S. K. Chua), July, 342 Building membrane men with Circumferential Notch (Chobin Ce
Vapor Permeances, Air Permeances, and Makabe, Murdani Anggit, Toshiyasu Suey Efi
Water absorption Coefficients of Building oshi, and Tateki Yafuso), Sept., 423 Fal
Membranes (Mavinkal K. Kumaran, John Classic denim an
Ball indenter C. Lackey, Nicole Normandin, and David
Effects of Laundering on Environmentally
Effects of Steel and Tungsten Carbide Ba van Reenen), May, 241
Improved and Classic Denim Fabrics (Amy
Indenters on Rockwell Hardness
Measurements (Li Ma, Samuel R. Low, and Fox and Mary Ann Moore), May, 181
James Fink), May, 187 Cold in-place recycling
( +--+
Bars Field and Laboratory Properties of Lime
Story Of MEGADAS Keeping 200-
esting Techniques and Tools to Determine Treated Cold In-Place Recycled Asphalt
Properties of Fiber-Reinforced Rods (Mo Channel Legacy Data Acquisition Hard Pavements (Rafiqul Alam Tarefder, Mush
ware Running by Developing a New Soft
hamed Elzafraney and Parviz Soroushiat arraf Zaman, Roland Sisson, and Cheong
ware Interface (Ondrej Kalny, Robert J
March, 135 Fung Ting), Jan., 31
Peterman, and Chune Huang), May, 251
Bioenergy Cold recycling
Calcareous
Developing a Geographical Information \ Study on Properties of Foamed-Asphalt
Utilization of Steel Slag Aggregate for
System Database and Spatial Analysis for a Treated Mixes (Chui-Te Chiu and A. J. N
Forest Biomass Resource Assessment Road Bases (Saad Ali Aiban), Jan., 65 L| ewis), Jan., 5
(Elaine M. Hughes and Kurt H. Mackes California Bearing Ratio
Color index
May, 153 Utilization of Steel Slag Aggregate for
\ Procedure to Quantify Organic Antistrip
Road Bases (Saad Ali Aiban), Jan., 65
Biopolymers Additives in Asphalt Binders and Mixes
Performance Evaluation of PLA against Ex Cement (Chun Chen, Akhtarhusein A. Tayebali, and
isting PET and PS Containers (Rafael Au Behavior of Fiber-Reinforced Cement- Detlef R. U. Knappe), July, 269
ras, Sher Paul Singh, and Jagjit Singh) Stabilized Fly Ashes (Shenbaga R. Kaniraj
Nov., 530 and V. Gayathri), July, 290 Column buckling
Column Compression Strength of Tubulai
Bitumen Ceria-based single cell Packaging Forms Made from Paper (Tho
Effect of Bitumen Acid Number on Mois- Tracking the Onset of Damage Mechanism mas J. Urbanik, Sung K. Lee, and Charles
ture Susceptibility of Asphalt Mixtures in Ceria-Based Solid Oxide Fuel Cells un- G. Johnson), Nov., 477
SUBJECT INDEX 583
Combination mode Correlation analysis (Liyun Zhou and Weikang Lao), Sept., 447
Mechanical Principles of a New Two-Way Surface Roughness Measurement Using
Cyclic
Composite Disk Spring Cap for Pile Laser Speckle Statistical Analysis (Mo-
Driving (Liyun Zhou and Jianbin Chen), hamed A. Seif and Mohammad Rawwash), Constant and Variable Amplitude Cyclic
July, 368 Sept 410 Plasticity in 316L Stainless Steel (Paul van
Eeten and Fred Nilsson), July, 298
Compact tension specimens Crack closure
Cyclic torsion
Experimental Determination of Fatigue Experimental Determination of Fatigue
The Formation Mechanism of the Factory-
Crack Closure in 316 (N) Weld Using a Crack Closure in 316 (N) Weld Using a
Roof Pattern in a Torsional Fatigue Speci-
Global CMOD Method (P. Johan Singh and Global CMOD Method (P. Johan Singh and
S. L. Mannan), March, 98 S. L. Mannan), March,9 8 men with Circumferential Notch (Chobin
Makabe, Murdani Anggit, Toshiyasu Suey-
Effects of Different Load Schemes on the
Compatibility Fatigue Crack Growth Rate (Par Ljustell oshi, and Tateki Yafuso), Sept., 423
Performance Evaluation of PLA against Ex- and Fred Nilsson), July, 333
isting PET and PS Containers (Rafael Au-
ras, Sher Paul Singh, and Jagjit Singh), Crack compliance method D
Nov., 530 Slot Machining Effects on Residual Stress
Measurements Using the Crack Compli- Damage
Compression strength ance Method (Marcelo T. Milan, Waldek W Durability Test Analysis in a Passenger Ve-
Column Compression Strength of Tubular Bose Filho, Artur M. S. Malafaia, Breno( ¢ hicle Damper Spring Tower (Ernani Sales
Packaging Forms Made from Paper (Tho- Pelizer, and Caue P. O. Silva), March, 149 Palma and Marcio Geraldo Magela
mas J. Urbanik, Sung K. Lee, and Charles Martins), Nov., 504
G. Johnson), Nov., 477 Creep
The Activation Energy of the Static Fatigue Damage curve analysis
Compressive strength (Creep of Steel) (Wolfgang Graefe), March, Damage-Based Models for Step-Stress Ac
Behavior of Fiber-Reinforced Cement- 143 celerated Life Testing (Yung-Li Lee and
Stabilized Fly Ashes (Shenbaga R. Kaniraj Ming-Wei Lu), Nov., 494
and V. Gayathri), July, 290 Critical crack length
The Influence of Initial Crack Length on Damage mechanism
Concrete Critical Stress Intensity Factor K, (Eduardo Tracking the Onset of Damage Mechanism
Testing Techniques and Tools to Determine R. Abril), Sept., 430 in Ceria-Based Solid Oxide Fuel Cells un-
Properties of Fiber-Reinforced Rods (Mo- der Simulated Operating Conditions (Kazu-
hamed Elzafraney and Parviz Soroushian), Crosshatch testing hisa Sato, Hajime Omura, Toshiyuki
March, 135 Evaluation of. Adhesive Strength of Thin Hashida, Keiji Yashiro, Hiroo Yugami, Tat-
Direct Shear Behavior of Carbon Fiber- Plasma Sprayed Oxide Coatings by a Cross- suya Kawada, and Junichiro Mizusaki),
Reinforced Polymer Laminates and hatch Testing Method (R. Venkataraman, T May, 246
Concrete (Cheng-Tzu Thomas Hsu, Wonsiri S. Sampath Kumar, and Krishnamurthy
Punurai, Yongxin Jia, and Haitao Bian), Ramalingam), Sept., 440 Data acquisition
Story of MEGADAC 200: Keeping 200-
May, 158 Cryptocompression Channel Legacy Data Acquisition Hard-
Constant KI,max-method An Efficient DCT-Based Cryptocompres- ware Running by Developing a New Soft-
Effects of Different Load Schemes on the sion Scheme for a Secure and Authentic ware Interface (Ondrej Kalny, Robert J
Fatigue Crack Growth Rate (Par Ljustell Medical Image Transmission (Mohamed Peterman, and Chune Huang), May, 251
Salim Bouhlel, Fahmi Kammoun, and Eric
and Fred Nilsson), July, 333
Garcia), Nov., 459 Dataset
Constraint factor Evaluation of the ASTM J Initiation Proce-
On Measuring Mixed Mode I/III Fracture Crystallite size dure Using the EURO Fracture Toughness
Toughness of Ductile Materials Using the Consolidation of Mechanica ly Alloyed Ti- Data Set (John D. Landes), May, 200
tanium § Silicide using Polycarbosilane
Critical Stretch Zone Width (S. V. Kamat,
(Malur N. Srinivasan and Surekha N DCT
M. Srinivas, and P. Rama Rao), March, 111
Aripaka), Jan., 11 An Efficient DCT-Based Cryptocompres-
Continuous wavelet transform sion Scheme for a Secure and Authentic
Fault Detection in a Water Hydraulic Motor Cumulative erosion-time curves Medical Image Transmission (Mohamed
Using a Wavelet Transform (H. X. Chen, G Shot-Peening Effects on Metal Erosion (\ Salim Bouhlel, Fahmi Kammoun, and Eric
H. Lim, and Patrick S. K. Chua), July, 342 Meged), July, 357 Garcia), Nov., 459
Comparative Survey of the DCT and the
Cumulative exposure model
Control Wavelet Transforms for Image
Damage-Based Models for Step-Stress Ac-
Experimental Stability Analysis of a Test Compression (Fahmi Kammoun, Wiem
celerated Life Testing (Yung-Li Lee and
System for Doing Fatigue Tests under Ran- Fourati, and Mohamed Salim Bouhlel),
Ming-Wei Lu), Nov., 494
dom Loading (Ming Li), July, 364 Nov., 484
Cumulative mass loss-time curve
Copper residuals Denim
On the Anomaly of Cumulative Erosion and
\ Digital Image Processing Technique for Effects of Laundering on Environmentally-
\brasion-Time Curves (Y. Meged), Jan., 42
Quantification of Surface Hot-Shortness Improved and Classic Denim Fabrics (Amy
Cracks (L. G. Garza and C. J. Van Tyne), Curing Fox and Mary Ann Moore), May, 181
Jan., | Behavior of Fiber-Reinforced Cement-
Density
Stabilized Fly Ashes (Shenbaga R. Kaniraj
Corner post Heat, Air and Moisture Transport Properties
and V. Gayathri), July, 290
Column Compression Strength of Tubular of Three North American Stuccos (Ma-
Packaging Forms Made from Paper (Tho- Cushioning materials vinkal K. Kumaran, John C. Lackey, Nicole
mas J. Urbanik, Sung K. Lee, and Charles Studying of the Dynamic Behavior of Pile Normandin, Fitsum Tariku, and David van
G. Johnson), Nov., 477 Cushioning Materials in Pile Driving Reenen), July, 351
584 JOURNAL OF TESTING AND EVALUATION
Deviation coefficient Eigenvalue Factory-roof pattern Finit
Accelerated Aging on Sealants and a Quan- IT Projects Performance Indices and The Formation Mechanism of the Factory- Effec
tificational Way to Evaluate the Durability Evaluation (O. C. Akinyokun and S. ¢ Roof Pattern in a Torsional Fatigue Speci- Inde1
(Su Hua Ding and Da Zhuang Liu), March, Chiemeke), Nov., 515 men with Circumferential Notch (Chobin Mea:
79
Makabe, Murdani Anggit, Toshiyasu Suey- Jame
Elastic modulus oshi, and Tateki Yafuso), Sept., 423
Device harmonization Studying of the Dynamic Behavior of Pile Finit
Device Harmonization to Determine Cushioning Materials in Pile Driving Fatigue On t
Smoothness Specification for Asphalt (Liyun Zhou and Weikang Lao), Sept., 447 Field and Laboratory Properties of Lime- of A
Pavements (Jian-Shiuh Chen, Meng-Kung Treated Cold In-Place Recycled Asphalt Corr
Chang, and Kuei-Yi Lin), Sept., 383 Emulsion Pavements (Rafiqul Alam Tarefder, Mush- José
Field and Laboratory Properties of Lime- arraf Zaman, Roland Sisson, and Cheong-
Digital image processing Flan
Treated Cold In-Place Recycled Asphalt Fung Ting), Jan., 31
A Digital Image Processing Technique for Som
Pavements (Rafiqul Alam Tarefder, Mush-
Quantification of Surface Hot-Shortness Fatigue crack growth Poly
arraf Zaman, Roland Sisson, and Cheong-
Cracks (L. G. Garza and C. J. Van Tyne), Experimental Determination of Fatigue (Dav
Fung Ting), Jan., 31
Jan., | . Crack Closure in 316 (N) Weld Using a
EN959 Global CMOD Method (P. Johan Singh and Flex
RDDiierrieenccftto rcsSehhdee aarr PBoelhyamveiro r ofL amCianrabtoens Fibaern d PTierscthienrg) , of SepRto.,c k 416C limbing Anchors (Martin SEF.fa fteiLcg.tus Me anoCnfra anDc)ik,f f erGMeranrotcw ht,h Lo9a8Rd atSec he(Pmaers Ljouns tetlhle sMNpueowlr
Concrete (Cheng-Tzu Thomas Hsu, Wonsiri Entropy encoder and Fred Nilsson), July, 333 (Kas
Punurai, Yongxin Jia, and Haitao Bian) Comparative Survey of the DCT and the R.T
May, 158 Wavelet Transforms for Image Fatigue crack propagation
Disk spring pile cap Compression (Fahmi Kammoun, Wiem lhe Formation Mechanism of the Factory- Fly
Mechanical Principles of a New Two-Wa Fourati, and Mohamed Salim Bouhlel), Roof Pattern in a Torsional Fatigue Speci- Beh
Composite Disk Spring Cap for Pile Nov., 484 men with Circumferential Notch (Chobin Stak
Driving (Liyun Zhou and Jianbin Chen) Makabe, Murdani Anggit, Toshiyasu Suey- and
July, 368 Environmentally-improved fabrics oshi, and Tateki Yafuso), Sept., 423 FN
Effects of Laundering on Environmentally- The Influence of Initial Crack Length on
Eva
Disk springs Improved and Classic Denim Fabrics (Amy Critical Stress Intensity Factor K, (Eduardo Pro}
Studying of the Dynamic Behavior of Pile Fox and Mary Ann Moore), May, 181 R. Abril), Sept., 430
Tho
Cushioning Materials in Pile Driving
(Liyun Zhou and Weikang Lao), Sept., 447 Equilibrium moisture content Fatigue failure Foa
Heat, Air and Moisture Transport Properties Durability Test Analysis in a Passenger Ve- AS
Double linear damage rule of Three North American Stuccos (Ma- hicle Damper Spring Tower (Ernani Sales Tres
Damage-Based Models for Step-Stress Ac vinkal K. Kumaran, John C. Lackey, Nicole Palma and Marcio Geraldo Magela Lev
celerated Life Testing (Yung-Li Lee and Normandin, Fitsum Tariku, and David van Martins), Nov., 504
Ming-Wei Lu), Nov., 494 Reenen), July, 351 For
Fatigue life
Dev
Ductile-to-brittle transition Erosion Durability Test Analysis in a Passenger Ve- Sy Ss
On Setting Testing Rate Limitations for the On the Anomaly of Cumulative Erosion and hicle Damper Spring Tower (Ernani Sales For
oMfa stAerS TMC Eur ve 19R2e1 fer(eJnacmee s TeA.m peJroaycteu,r e R. | Abrasion-Time Curves (Y. Meged), Jan., 42 PMaarltmian s), anNdo v., M5a0r4c io Geraldo Magela (Els
Tregoning, and C. Roe), March, 121 Shot-Peening Effects on Metal Erosion (¥Y Ma'
Meged), July, 357 Fatigue life distribution
Durability Damage-Based Models for Step-Stress Ac- For
Accelerated Aging on Sealants and a Quan Erosive boundary layer celerated Life Testing (Yung-Li Lee and Eff
tificational Way to Evaluate the Durabilit On the Anomaly of Cumulative Erosion and Ming-Wei Lu), Nov., 494 and
(Su Hua Ding and Da Zhuang Liu), March Abrasion-Time Curves (Y. Meged), Jan., 42 (Fri
79
Fatigue test Me
EURO round robin
Durability Effects on Flexural Behavior of Experimental Stability Analysis of a Test
Evaluation of the ASTM J Initiation Proce Fra
Fly Ash Stabilized Limestone Aggregate System for Doing Fatigue Tests under Ran-
dure Using the EURO Fracture Toughness On
(Naji Khoury and Musharraf Zaman), May dom Loading (Ming Li), July, 364
Data Set (John D. Landes), May, 200 Ma
167
Feature extraction of '
Excess energy
Dynamic behavior Fault Detection in a Water Hydraulic Motor Tre
High Frequency Dynamic Testing of Rub Effects of Available Energy and Impact Using a Wavelet Transform (H. X. Chen, G Ev:
bers and Rubber to Metal Devices (Danilo Rate on Charpy Absorbed Energy in the H. Lim, and Patrick S. K. Chua), July, 342 dur
Cambiaghi, Andrea Magalini, Giorgio Upper Shelf (S. Xu, R. Bouchard, and W. R Dai
Ramorino, Theonis Riccd, and David Tyson), May, 176 : Fiber texture ‘eC
Vetturi), May, 211 Evaluation of Residual Stress in Fiber- the
Textured Films by X-Ray Diffraction (Jian-
Sul
Min Zhang, Ke-Wei Xu, and Vincent Ji),
Sal
Sept., 395
An
Fiber-reinforced polymer Fre
E
Factor Testing Techniques and Tools to Determine Nu
Eastern Saudi Arabia IT Projects Performance Indices and Properties of Fiber-Reinforced Rods (Mo- Ca
Utilization of Steel Slag Aggregate for Evaluation (O. C. Akinyokun and S. ¢ hamed Elzafraney and Parviz Soroushian), ass
Road Bases (Saad Ali Aiban), Jan., 65 Chiemeke), Nov., 515 March, 135 me
SUBJECT INDEX 585
Finite element analysis Freeze-thaw cycles ine Arends, Curt Parvin, Curt L. Rohlfing,
Effects of Steel and Tungsten Carbide Ball Durability Effects on Flexural Behavior of Hsiao-Mei Wiedmeyer, Randie Little, Carla
Indenters on Rockwell Hardness Fly Ash Stabilized Limestone Aggregate Siebelder, and Cas Weykamp), March, 128
Measurements (Li Ma, Samuel R. Low, and (Naji Khoury and Musharraf Zaman), May,
James Fink), May, 187 167 High rate testing
On Setting Testing Rate Limitations for the
Finite element stress analysis Frequency response Master Curve Reference Temperature, 7,,,
On the Thick-Adherend Tensile Shear Test On the Frequency Response of Model Ma- of ASTM E 1921 (James A. Joyce, R. |
of Adhesive Technology—Limitations and terials in Hydrotechnics (Jianbin Chen and Tregoning, and C. Roe), March, 121
Correction Methods (Andreas Ochsner and Liyun Zhou), Sept., 405
High-speed balancing
José Gracio), Jan., 53 FRP High-Speed Balancing of Rotors with
Flammability Testing Techniques and Tools to Determine Overhangs: When is Overhang Likely to
Some Issues Related to the Selection of roperties of Fiber-Reinforced Rods (Mo- Cause Problems? (Juan I. Hidalgo and
Polymers for Aerospace Oxygen Systems named Elzafraney and Parviz Soroushian), Anoop K. Dhingra), May, 218
March, 135
(David Hirsch and Harold Beeson), Jan., 76 Honeycomb
Fruit Instrumentation for Determining the Local
Flexible airfield pavement
Measurement and Analysis of Vibration Damping Capacity in Honeycomb Sand-
Multi-Depth Deflectometer Dynamic Re-
Levels in Commercial Truck Shipments in wich Composites (J. D. Lincoln, L. E.
sponse Measurements under Simulated
Thailand and Its Impact on Packaged Rieger, and J. C. Earthman), May, 232
New Generation Aircraft Gear Loading
Produce (S. Paul Singh, Bundit Jarimopas,
(Kasthurirangan Gopalakrishnan, Marshall and Wasan Saengnil), March, 104 Hot wire method
R. Thompson, and Anshu Manik), Nov., 522 Hot Wire Method to Characterize the Ther-
Fuel cladding mal Conductivity of Particle-Filled Polymer
Fly ash
An Internal Conical Mandrel Technique for Grouts Used in Pipe-in-Pipe Application
Behavior of Fiber-Reinforced Cement-
Fracture Toughness Measurements on (Sujan P. Kulkarni and C. Vipulanandan),
Stabilized Fly Ashes (Shenbaga R. Kaniraj
Nuclear Fuel Cladding (Claude Sainte May, 224
and V. Gayathri), July, 290 Catherine, David Le Boulch, Sébastien Car-
Hot-shortness
FN 303 assou, Natesan Ramasubraman> ian, and Cleé- A Digital Image Processing Technique for
Evaluation of the FN 303 Less Lethal ment Lemaignan), Sept., 373 Quantification of Surface Hot-Shortness
Projectile (Charles T. Mesloh and L. Frank Cracks (L. G. Garza and C. J. Van Tyne),
Thompson), Nov., 574 G Jan., |
Foamed asphalt GCMOD Hydrated lime
A Study on Properties of Foamed-Asphalt- Experimental Determination of Fatigue A Laboratory Study of the Effectiveness of
Treated Mixes (Chui-Te Chiu and A. J. N. Crack Closure in 316 (N) Weld Using a Various Additives on Moisture Susceptibil-
Lewis), Jan., 5 Global CMOD Method (P. Johan Singh and ity of Asphalt Mixtures (Peiwen Hao and
S. L. Mannan), March, 98 HongYing Liu), July, 261
Forest biomass
Developing a Geographical Information Geotechnical centrifuge Hydromolecules
System Database and Spatial Analysis for a Determination of Thermal Properties of Hydrophilic Characterization of Automo-
Forest Biomass Resource Assessment Soils in a Geotechnical Centrifuge (S. tive Brake Fluid (Mu-Jung Kao, Der-Chi
(Elaine M. Hughes and Kurt H. Mackes), Krishnaiah and D. N. Singh), July, 319 Tien, Chen-Ching Ting, and Tsing-Tshih
May, 153 GFRP Tsung), Sept., 400
Forming limit diagram Testing Techniques and Tools to Determine Hydrophilic characterization
Effect of Punch Diameter, Grid Dimension, Properties of Fiber-Reinforced Rods (Mo- Hydrophilic Characterization of Automo-
and Lubrication on Forming Limit Diagram hamed Elzafraney and Parviz Soroushian), tive Brake Fluid (Mu-Jung Kao, Der-Chi
(Francesco Casari, Marco Tassan, Angelo March, 135 Tien, Chen-Ching Ting, and Tsing-Tshih
Messina, and Alberto Molinari), Jan., 24 Glass Tsung), Sept., 400
Fracture toughness : The Activation Energy of the Static Fatigue Hydrotechnics test
On Setting Testing Rate Limitations for the (Creep of Steel) (Wolfgang Graefe), March, On the Frequency Response of Model Ma-
143 terials in Hydrotechnics (Jianbin Chen and
Master Curve Reference Temperature, 7,,,
of ‘ASTM E 1921 (James A. Joyce, R. L Grid dimension Liyun Zhou), Sept., 405
Tregoning, and C. Roe), March, 121 Effect of Punch Diameter, Grid Dimension, Hygroscopic fluid
Evaluation of the ASTM J Initiation Proce- and Lubrication on Forming Limit Diagram Hydrophilic Characterization of Automo-
dure Using the EURO Fracture Toughness (Francesco Casari, Marco Tassan, Angelo tive Brake Fluid (Mu-Jung Kao, Der-Chi
Data Set (John D. Landes), May, 200 Messina, and Alberto Molinari), Jan., 24 Tien, Chen-Ching Ting, and Tsing-Tshih
4 Two-Parameter Method for Determining Tsung), Sept., 400
the Fracture Toughness of Materials from H
Subsized Specimens (Edgardo I
Hardening
Santarelli), July, 280
Constant and Variable Amplitude Cyclic
An Internal Conical Mandrel Technique for
Plasticity in 316L Stainless Steel (Paul van
Fracture Toughness Measurements on
Eeten and Fred Nilsson), July, 298
Nuclear Fuel Cladding (Claude Sainte Ignition
Catherine, David Le Boulch, Sébastien Car- HbA\Ic reference standardization Some Issues Related to the Selection of
assou, Natesan Ramasubramanian, and Cle- Statistical Rules for Laboratory Networks Polymers for Aerospace Oxygen Systems
ment Lemaignan), Sept., 373 (Andrea Konnert, Christoph Berding, Sab- (David Hirsch and Harold Beeson), Jan., 76
586 JOURNAL OF TESTING AND EVALUATION
Image analysis interlaboratory studies Loa
Thermal Stability Testing of Refractory Statistical Rules for Laboratory Networks Effe
Specimen (T. Volkov Husovic), Nov., 570 (Andrea Konnert, Christoph Berding, Sab- Laboratory foaming plant Fati
ine Arends, Curt Parvin, Curt L. Rohlfing, A Study on Properties of Foamed-Asphalt- and
Image analyzing Hsiao-Mei Wiedmeyer, Randie Little, Carla Treated Mixes (Chui-Te Chiu and A. J. N.
Evaluation of the Simulated Material Mi- Siebelder, and Cas Weykamp), March, 128 Lewis), Jan., 5 Loc
crostructures Using the Image Processing Inst
and Image Analyzing Methods (S. M. Hafez Interrupting high speed tensile test Laser speckles Dar
Haghighat and A. Karimi Taheri), Nov., 507 Strain Control during High Speed Tensile Surface Roughness Measurement Using wic
Testing (Ildong Choi, Sungbok Lee, David Laser Speckle Statistical Analysis (Mo-
Image compression Rie
K. Matlock, and John G. Speer), Sept., 443 hamed A. Seif and Mohammad Rawwash),
Comparative Survey of the DCT and the
Sept., 410 Los
Wavelet Transforms for Image IQI
Inst
Compression (Fahmi Kammoun, Wiem Sensitivity Evaluation in Double Wall Radi- Laundering Dat
Fourati, and Mohamed Salim Bouhlel), ography of Pipes and Multilayer Plates by Effects of Laundering on Environmentally- wic
Nov., 484 (AKs.s esEsdamleantti, tBh.e RMooknrtoek, CaA.r loK erSmiamnuil,a tioMn. Improved and Classic Denim Fabrics (Amy Rie
Image processing Fox and Mary Ann Moore), May, 181
Evaluation of the Simulated Material Mi- Seiedi, A. Movafeghi, and N. Rastkhah), Lu
crostructures Using the Image Processing Nov., 562 Less lethal Eff
and Image Analyzing Methods (S. M. Hafez IRI Evaluation of the FN 303 Less Lethal and
Haghighat and A. Karimi Taheri), Nov., 507 Application of 3D Laser Scanning on Mea- Projectile (Charles T. Mesloh and L. Frank (Fr:
suring Pavement Roughness (Jia-Ruey Thompson), Nov., 574 Me
Impact certification program
Uncertainty in Reference Values for the Chang, Kuan-Tsung Chang, and Dar-Hao Lime
Chen), March, 83
Charpy V-Notch Verification Program (J. D Field and Laboratory Properties of Lime-
Splett and C.M . Wang), May, 237 Iron Treated Cold In-Place Recycled Asphalt
The Activation Energy of the Static Fatigue Pavements (Rafiqul Alam Tarefder, Mush-
Impact rate (Creep of Steel) (Wolfgang Graefe), March, arraf Zaman, Roland Sisson, and Cheong-
Effects of Available Energy and Impact 143 Fung Ting), Jan., 31
Rate on Charpy Absorbed Energy in the
Upper Shelf (S. Xu, R. Bouchard, and W. R ISO GUM Limestone
Tyson), May, 176 Uncertainty in Reference Values for the Utilization of Steel Slag Aggregate for
Charpy V-Notch Verification Program (J. D Road Bases (Saad Ali Aiban), Jan., 65
Impact testing
Splett and C. M. Wang), May, 237
Uncertainty in Reference Values for the Linear damage rule
Charpy V-Notch Verification Program (J. D Isotropic Damage-Based Models for Step-Stress Ac-
Splett and C. M. Wang), May, 237 Constant and Variable Amplitude Cyclic celerated Life Testing (Yung-Li Lee and
Incremental slitting Plasticity in 316L Stainless Steel (Paul van Ming-Wei Lu), Nov., 494
Eeten and Fred Nilsson), July, 298 ©
Slot Machining Effects on Residual Stress
Linear elastic fracture mechanics
Measurements Using the Crack Compli-
(LEFM)
ance Method (Marcelo T. Milan, Waldek W
A Two-Parameter Method for Determining On
Bose Filho, Artur M. S. Malafaia, Breno ¢
Pelizer, and Caue P. O. Silva), March, 149 the Fracture Toughness of Materials from Mi
J integral Subsized Specimens (Edgardo L of
Index On Setting Testing Rate Limitations for the Santarelli), July, 280 Tre
IT Projects Performance Indices and
Evaluation (O. C. Akinyokun and S. ( Master Curve Reference Temperature, 7,,, Liquid antistrippinng agent M:
Chiemeke), Nov., 515 of ASTM E 1921 (James A. Joyce, R. | \ Laboratory Study of the Effectiveness of He
Tregoning, and C. Roe), March, 121 Various Additives on Moisture Susceptibil- ol
Inelastic stresses J-R test ity of Asphalt Mixtures (Peiwen Hao and vil
The Influence of Initial Crack Length on Round Robin Test on Normalization HongYing Liu), July, 261
Critical Stress Intensity Factor K, (Eduardo
Method under Static Loading Condition
R. Abril), Sept., 430 Liquid diffusivity
(Young Jin Oh, Il Soon Hwang, and James
Heat, Air and Moisture Transport Properties
Influence coefficients aN Joyce), Nov., 537
‘of Three North American Stuccos (Ma-
High-Speed Balancing of Rotors with
JPEG vinkal K. Kumaran, John C. Lackey, Nicole
Overhangs: When is Overhang Likely to
Comparative Survey of the DCT and the Normandin, Fitsum Tariku, and David van
Cause Problems? (Juan I. Hidalgo and
Wavelet Transforms for Image Reenen), July, 351
Anoop K. Dhingra), May, 218
Compression (Fahmi Kammoun, Wiem
Insert Fourati, and Mohamed Salim Bouhlel), Litmus test
Column Compression Strength of Tubular Nov., 484 A Procedure to Quantify Organic Antistrip
Packaging Forms Made from Paper (Tho- Additives in Asphalt Binders and Mixes
mas J. Urbanik, Sung K. Lee, and Charles (Chun Chen, Akhtarhusein A. Tayebali, and Di
G. Johnson), Nov., 477 Detlef R. U. Knappe), July, 269 Ju
K
Instruments Load damage exponents
Testing Techniques and Tools to Determine Kinematic Determination of Load Damage Relation- Or
Properties of Fiber-Reinforced Rods (Mo- Constant and Variable Amplitude Cyclic ships through Accelerated Pavement of
hamed Elzafraney and Parviz Soroushian), Plasticity in 316L Stainless Steel (Paul van Testing (Dar-Hao.Chen, Fujie Zhou, and
March, 135 Eeten and Fred Nilsson), July, 298 Edel R. Cortez), July, 312 Jo