Table Of Content

Giakoumatos, E. — (see Karamanos, S. A.) 125, 393-402 Kihiu, J. M., Rading, G. O., and Mutuli, S. M. — Geometric Glinka, G. — (see Kiciak, A.) 125, 260-266 Constants in Plain Cross-Bored Cylinders. 125, 446-453 Gotoh, Nobuho — (see Kawamura, Tsutomu) 125, 97-108 Kim, Jin-Su, Koo, Bon-Geol, Choi, Jae-Boong, Kim, Young-Jin, and Gresnigt, A. M. — (see Karamanos, S. A.) 125, 393-402 Park, Yun-Won — A Finite Element Study on the Integrity Evaluation Method of Subclad Cracks Under Pressurized Thermal Shock Transients. 125, 46-51 Hagihara, Seiya, and Miyazaki, Noriyuki — Bifurcation Buckling Kim, Y. — (see Lam, P.-S.) 125, 136-143 Analysis of Conicai Roof Shell Subjected to Dynamic Internal Kim, Young-Jin — (see Kim, Jin-Su) 125, 46-51 Pressure by the Finite Element Method. 125, 78—84 Kobasko, Nikolai I. — (see Freborg, Andrew M.) 125, 188-194 Hall, Clark — (see Smith, John H.) 125, 177-181 Koo, Bon-Geol — (see Kim, Jin-Su) 125, 46-51 Hameed, Amer, Brown, R. D., and Hetherington, J. G. — Numerical Kushwaha, H. S. — (see Chattopadhyay, J.) 125, 36-45 Analysis of the Effect of Machining on the Depth of Yield, Maximum Firing Pressure and Residual Stress Profile in an Autofrettaged Gun Tube. 125, 342-346 Lam, P.-S., Chao, Y. J., Zhu, X.-K., Kim, Y., and Sindelar, R. L. Hayashi, Masaaki — (see Kawamura, Tsutomu) 125, 97-108 — Determination of Constraint-Modified J-R Curves for Hetherington, J. G. — (see Hameed, Amer) 125, 342-346 Carbon Steel Storage Tanks. 125, 136-143 Hetherington, John G., Guest Editor, Parker, Anthony P., Guest Lawton, Dr. B. — The Influence of Additives on the Temperature, Heat Editor, and Underwood, John H., Guest Editor — Special Transfer, Wear, Fatigue Life, and Self Ignition Characteristics of a Issue on Pressure Vessels Technology Applied to Gun Tubes. 125, 241 155 mm Gun. 125, 315-320 Heys, Graham B. — (see Eason, Ernest D.) 125, 385-392 Higuchi, Makoto, Tsutsumi, Kazuya, Hirano, Akihiko, and Lee, Sabrina L. — (see Cote, Paul J.) 125, 335-341 Sakaguchi, Katsumi — A Proposal of Fatigue Life Correction Factor Levy, C., Perl, M., and Ma, Q. — Erosions and Their Effect on the F ,,, for Austenitic Stainless Steels in LWR Water Environments. Fatigue Life of Thick Walled, Autofrettaged, Pressurized 125, 403-410 Vessels. 125, 242-247 Hirano, Akihiko, Yamamoto, Michiyoshi, Sakaguchi, Katsumi, Shoji, ; Perl, M., and Ma, Q. — The Influence of Finite Three- Tetsuo, and lida, Kunihiro — Effects of Water Flow Rate on Dimensional Multiple Axial Erosions on the Fatigue Life of Partially Fatigue Life of Carbon Steel in Simulated LWR Environment Under Autofrettaged Pressurized Cylinders. 125, 379-384 Low Strain Rate Conditions. 125, 52-58 Longatte, E., Bendjeddou, Z., and Souli, M. — Application of (see Higuchi, Makoto) 125, 403-410 Arbitrary Lagrange Euler Formulations to Flow-Induced Holzle, Jurg — Influence of the “Critical Velocity’ Phenomenon on Vibration Problems. 125, 411-417 Chromium-Plated Gun Barrels. 125, 352-354 Lu, Jian — (see Ya, Min) 125, 201-208 lida, Kunihiro — (see Hirano, Akihiko) 125, 52-58 Ma, Q. — (see Levy, C.) 125, 242-247 Iremonger, Michael J., and Kalsi, Gurdip S. — A Numerical Study of (see Levy, C.) 125, 379-384 Swage Autofrettage. 125, 347-351 Mackenzie, Donald — (see Muscat, Martin) 125, 365-370 Irfan-ul-Haq, Muhammad, and Merah, Nesar — Effect of Maeda, Yoshio — (see Ohta, Akihiko) 125, 131—135 Temperature on Fatigue Crack Growth in CPVC. 125, 71-77 Marie, S., and Nedélec, M. — Elastic Stresses in Elbows Submitted to In-Plane Bending Moment. 125, 209-220 Martin, A., and Bellet, S. — CFD-Tools Qualification for Thermal- Jahed, Hamid, and Ghanbari, Ghader — Actual Unloading Behavior Hydraulics Pressurized Thermal Shock Analysis. 125, 418-424 and Its Significance on Residual Stress in Machined Autofrettaged Merah, N. — (see Shuaib, A. N.) 125, 19-25 Tubes. 125, 321-325 Merah, Nesar — (see Irfan-ul-Haq, Muhammad) 125, 71-77 Jie, Jin — (see Zhiming, Lu) 125, 475-477 Miyazaki, Noriyuki — (see Hagihara, Seiya) 125, 78-84 Jo, Jong Chull, Choi, Young Hwan, and Choi, Seok Ki — Numerical Moak, David B. — (see Underwood, John H.) 125, 7-10 Analysis of Unsteady Conjugate Heat Transfer and Thermal Stress Mossey, Charles — (see Parker, Anthony P.) 125, 277-281 for a Curved Piping System Subjected to Thermal (see Troiano, Edward) 125, 330-334 Stratification. 125, 467-474 Murayama, Kouichi — (see Kawamura, Tsutomu) 125, 97-108 (see Choi, Chang-Yong) 125, 109-117 Muscat, Martin, and Mackenzie, Donald — Elastic-Shakedown Analysis of Axisymmetric Nozzles. 125, 365-370 Mutuli, S. M. — (see Kihiu, J. M.) 125, 446-453 Kalsi, Gurdip S. — (see Iremonger, Michael J.) 125, 347-351 Karamanos, S. A., Giakoumatos, E., and Gresnigt, A. M. — Nonlinear Response and Failure of Steel Elbows Under In-Plane Bending and Nakao, Toshitsugu — (see Kawamura, Tsutomu) 125, 97-108 Pressure. 125, 393-402 Nam, Ho Yun — (see Choi, Seok Ki) 125, 233-238 Kawamura, Tsutomu, Nakao, Toshitsugu, Takahashi, Masanori, Narasimhan, K. — (see Rajan, K. M.) 125, 253-259 Hayashi, Masaaki, Murayama, Kouichi, and Gotoh, Nédélec, M. — (see Marie, S.) 125, 209-220 Nobuho — Synchronized Vibrations of a Circular Cylinder in Cross Nelson, Edward E. — (see Eason, Ernest D.) 125, 385—392 Flow at Supercritical Reynolds Numbers. 125, 97-108 Nickell, Robert E. — ASME Boiler & Pressure Vessel Code Kendall, David P. — Comparison of Methods for Calculating Stress Requirements for Prevention of Brittle Fracture. 125, 121-130 Intensity Factors for the Thread of a Pressure Vessel Closure and of a Gun Breech Ring. 125, 326-329 (see Parker, Anthony P.) 125, 282—286 Kendall, Gay — (see Cote, Paul J.) 125, 335-341 O’Hara, G. P. — (see Parker, A. P.) 125, 309-314 Khraisheh, M. K. — (see Shuaib, A. N.) 125, 19-25 Ohta, Akihiko, Suzuki, Naoyuki, and Maeda, Yoshio — Fatigue Kiciak, A., Glinka, G., and Burns, D. J. — Calculation of Stress Crack Propagation Properties of Welded Joints at 300°C. Intensity Factors and Crack Opening Displacements for 125, 131-135 Cracks Subjected to Complex Stress Fields. 125, 260-266 Ohtake, Yasuhiro — (see Okamoto, Asao) 125, 59-64 Journal of Pressure Vessel Technology NOVEMBER 2003, Vol. 125 / 479 Okamoto, Asao, and Ohtake, Yasuhiro — Simplified Elastic-Plastic Smith, John H., Rana, Mahendra D., and Hall, Clark — The Use of Analysis Method Using K, Factors Obtained for the Real “Fitness for Service’ Assessment Procedures to Establish Critical Structural Model. 125, 59-64 Flaw Sizes in High-Pressure Gas Cy!inders. 125, 177-181 Ono, Masakazu — (see Fujita, Katsuhisa) 125, 151-157 Souli, M. — (see Longatte, E.) 125, 411-417 (see Fujita, Katsuhisa) 125, 158-164 Strohmeier, Klaus — (see Berger, Thomas) 125, 440-445 Ostraich, B. — (see Perl, M.) 125, 425-431 Sullivan, R. E. — (see Eisinger, F. L.) 125, 221-227 (see Eisinger, F. L.) 125, 228-232 Sullivan, Robert E. — (see Eisinger, Frantisek L.) 125, 454-459 Suzuki, Naoyuki — (see Ohta, Akihiko) 125, 131-135 Pachler, K. — (see Frank, Th.) 125, 1-6 Park, Yun-Won — (see Kim, Jin-Su) 125, 46-51 Parker, A. P., O’Hara, G. P., and Underwood, J. H. — Hydraulic Versus Swage Autofrettage and Implications of the Bauschinger Takahashi, Masanori — (see Kawamura, Tsutomu) 125, 97-108 Takaki, Tomohiro — (see Fukuoka, Toshimichi) 125, 371-378 Effect. 125, 309-314 Todaro, Mark E. — (see Cote, Paul J.) 125, 335-341 Parker, Anthony P., Guest Editor — (see Hetherington, John G., Guest Toth, Goran R. — Controlled Tightening Over the Yield Point of a Editor) 125, 241 Screw: Based on Taylor’s Series Expansions. 125, 460-466 Parker, Anthony P., and Kendall, David P. — Residual Stresses and Troiano, Edward, Parker, Anthony P., Underwood, John, and Lifetimes of Tubes Subjected to Shrink Fit Prior to Autofrettage. Mossey, Charles — Experimental Data, Numerical Fit and 125, 282-286 Fatigue Life Calculations Relating to the Bauschinger Effect in High ; Troiano, Edward, Underwood, John H., and Mossey, Strength Armament Steels. 125, 330—334 Charles — Characterization of Steels Using a Revised Kinematic (see Parker, Anthony P.) 125, 277-281 Hardening Model Incorporating Bauschinger Effect. (see Underwood, John H.) 125, 287-292 125, 277-281 Tsutsumi, Kazuya — (see Higuchi, Makoto) 125, 403-410 (see Troiano, Edward) 125, 330-334 Tzou, H. S., and Wang, D. W. — Vibration Control of Toroidal Shells (see Underwood, John H.) 125, 7-10 With Parallel and Diagonal Piezoelectric Actuators. 125, 171-176 (see Underwood, John H.) 125, 299-304 Pavankumar, T. V. — (see Chattopadhyay, J.) 125, 36-45 Peddieson, J. — (see Wu, D.) 125, 357-364 Underwood, J. H. — (see Parker, A. P.) 125, 309-314 Perl, M., and Ostraich, B. — Analysis of Uniform Arrays of Three- Underwood, John — (see Troiano, Edward) 125, 330-334 Dimensional Unequal-Depth Cracks in a Thick-Walled Underwood, John H., Guest Editor — (see Hetherington, John G., Cylindrical Pressure Vessel. 125, 425-431 Guest Editor) 125, 241 (see Levy, C.) 125, 242-247 Underwood, John H., Moak, David B., Audino, Michael J., and (see Levy, C.) 125, 379-384 Parker, Anthony P. — Yield Pressure Measurements and Perry, Joseph, and Aboudi, Jacob — Elasto-Plastic Stresses in Thick Analysis for Autofrettaged Cannons. 125, 7-10 Walled Cylinders. 125, 248-252 ; Parker, Anthony P., Vigilante, Gregory N., and Cote, Paul Petitpas, Eric, and Campion, B. — Crack Propagation in a Gun Barrel J.— Thermal Damage, Cracking and Rapid Erosion of Due to the Firing Thermo-Mechanical Stresses. 125, 293-298 Cannon Bore Coatings. 125, 299-304 Powell, Joseph A. — (see Freborg, Andrew M.) 125, 188-194 , and Troiano, Edward — Critical Fracture Processes in Army Cannons: A Review. 125, 287—292 (see Parker, Anthony P.) 125, 277-281 Rading, G. O. — (see Kihiu, J. M.) 125, 446-453 Rajan, K. M., and Narasimhan, K. — Failure Studies on Flow Formed High Strength Pressure Vessel: A Case Study. Vigilante, Gregory N. — (see Underwood, John H.) 125, 299-304 125, 253-259 Rana, Mahendra D. — (see Smith, John H.) 125, 177-181 Reinhardt, W. D., and Seshadri, R. — Limit Load Bounds for the m,, Wang, D. W. — (see Tzwu, H. S.) 125, 171-176 Multiplier. 125, 11-18 Wang, Xin, and Reinhardt, Wolf — On the Assessment of Through- Reinhardt, Wolf — (see Wang, Xin) 125, 85-90 Wall Circumferential Cracks in Steam Generator Tubes With Rochelle, S. G. — (see Wu, D.) 125, 357-364 Tube Supports. 125, 85-90 Weaver, D. S. — (see Eisinger, F. L.) 125, 228-232 Widera, G. E. O. — (see Xue, L.) 125, 182-187 Sakaguchi, Katsumi — (see Higuchi, Makoto) 125, 403-410 Wifi, Abdalla S. — (see Fanous, Ihab F. Z.) 125, 144-150 (see Hirano, Akihiko) 125, 52-58 {see Fanous, Ihab F. Z.) 125, 432-439 Wu, D., Peddieson, J., Buchanan, G. R., and Rochelle, S. G. Sang, Z. F. — (see Xue, L.) 125, 182-187 — Large Axisymmetric Deformations of Elastic/Plastic Perforated Schneider, H. — (see Frank, Th.) 125, 1-6 Circular Plates. 125, 357-364 Seibi, Abdennour C., and Zamrik, Sam Y. — Prediction of Crack Initiation Direction for Surface Flaws Under Biaxial Loading. 125, 65-70 Seshadri, R. — (see Reinhardt, W. D.) 125, 11-18 Xue, L., Widera, G. E. O., and Sang, Z. F. — Influence of Pad (see Zhao, W.) 125, 267-273 Reinforcement on the Limit and Burst Pressures of a Shintani, Atsuhiko — (see Fujita, Katsuhisa) 125, 151-157 Cylinder-Cylinder Intersection. 125, 182—187 (see Fujita, Katsuhisa) 125, 158-164 Shoji, Tetsuo — (see Hirano, Akihiko) 125, 52-58 Shuaib, A. N., Merah, N., Khraisheh, M. K., Allam, I. M., and Al- Ya, Min, Dai, Fulong, and Lu, Jian — Study of Nonuniform In-Plane Anizi, S. S. — Experimental Investigation of Heat Exchanger and In-Depth Residual Stress of Friction Stir Welding. Tubesheet Hole Enlargement. 125, 19-25 125, 201-208 Sindelar, R. L. — (see Lam, P.-S.) 125, 136-143 Yamamoto, Michiyoshi —(see Hirano, Akihiko) 125, 52-58 480 / Vol. 125, NOVEMBER 2003 Transactions of the ASME Yi, Qin — (see Zhiming, Lu) 125, 475-477 Zhao, Y. X. — A Probabilistic Assessment of the Design S-N Curves Younan, Maher Y. A. — (see Fanous, Ihab F. Z.) 125, 144-150 for 1Cr18Ni9Ti Pipe-Welded Joint. 125, 195-200 (see Fanous, Ihab F. Z.) 125, 432-439 Zhiming, Lu, Jie, Jin, Zengliang, Gao, and Yi, Qin — Effects of Axial Deformation Load on In-Plane Instability of U-Shaped Bellows. 125, 475-477 Zamrik, Sam Y. — (see Seibi, Abdennour C.) 125, 65-70 Zhu, X.-K. — (see Lam, P.-S.) 125, 136-143 Zengliang, Gao — (see Zhiming, Lu) 125, 475-477 Zhao, W., Seshadri, R., and Dubey, R. N. — On Thick-Walled Cylinder Under Internal Pressure. 125, 267-273 Journal of Pressure Vessel Technology NOVEMBER 2003, Vol. 125 / 481