Journal of Power Sources 1991: Vol 36 Index

5 Pages·1991·0.8 MB·English

Journal of Power Sources, 36 (1991) 589-593
Subject Index of Volume 36
Activation studies Capacitor
fabrication and activation studies of new solid-state electric double-layer
conducting plastic composite elec- capacitor using poly(vinyl alcohol)-
trodes for redox cells, 29 based polymer solid electrolyte, 87
Alkaline fuel cells solid-ionomer electrochemical capacitor,
oxygen electrodes for rechargeable 341
alkaline fuel cells, 323 Capacity loss
pyrclyzed macrocycles on high surface premature capacity loss in lead/acid
area carbons for reduction of oxy- batteries; Sb-free effect and related
gen in alkaline fuel cells, 547 phenomena, 567
Alloy Carbon dioxide
analysis of conditions that promote Au cathode in system Li,CO,—CO,-CO
passivation on Ca—alloy grids in at 800 to 900 °C, 205
lead/acid batteries, 451 Cathode(s)
Aluminum Au cathode in system Li,CO,-CO,-CO
experimental studies of transition metal at 800 to 900 °C, 205
chloride electrodes in undivided influence of macrocyclic compounds on
cells using molten NaAICl, electro- electrochemical reduction of thionyl
lyte, 537 chloride at glassy carbon cathodes,
pulse power characteristics of poly(3- 127
methylthiophene) cathodes in Li rechargeable cell with poly 3-methyl-
Li(SO,),AICl, electrolyte, 175 thiophene cathode and LiAsF,—
Anode dimethyl carbonate electrolyte, 561
performance of dual anode Ni-H, cell, overcharge protection of MnO, cath-
363 odes, 45
Antimony pulse power characteristics of poly(3-
premature capacity loss in lead/acid methylthiophene) cathodes in
batteries; Sb-free effect and related Li(SO,),AICl, electrolyte, 175
phenomena, 567 Cobalt
Arsenic
electrochemical behaviour of a-cobalted
Li rechargeable cell with poly 3-methyl- Ni hydroxide electrodes, 497
thiophene cathode and LiAsF,—
dimethyl carbonate electrolyte,
561
Battery research doped films of Co hydroxiind 1e M
Na—metal chloride battery research at KOH, 507
JPL, 385 Common pressure vessel
Bismuth mulCPtV Nii—H,p baltterey, 375
effect of Bi on corrosion behaviour of Compuaidted edersig n
Pb in sulphuarciid,c 5 7
of bipolar lead/acid battery, 155
Computer simulation
of thermal modelolf ialnkaglin e
Calcium hydrogen/fouexl ycelglse, n18 5
analysis of conditthait oprnomsot e Corrosion behaviour
passivation on Ca—alloy grids in effect of Bi on corrosion behaviour of
lead/acid batteries, 451 Pb in sulphuarciid,c 5 7
Elsevier Sequoia, Lausanne
590
Current-conducting components physicochemical properties and per-
new materials for current-conducting formance characteristics of PbO,
components in lead/acid batteries, electrode, 439
473 Raman spectral observation of ‘new
Cyclability phase’ observed in Ni electrodes
effects of physical constraints on Li cycled to failure, 279
cyclability, 517 Electrode kinetics
Cyclic voltammetric studies high energy efficiency and high power
of pure and doped films of Co hydrox- density PEM fuel cells; electrode
ide in 1 M KOH, 507 kinetics and mass transport,
299
Dimethyl carbonate Electrolyte(s)
Li rechargeable cell with poly 3-methyl- experimental studies of transition metal
thiophene cathode and LiAsF,— chloride electrodes in undivided
dimethyl carbonate electrolyte, 561 cells using molten NaAlICl, electro-
lyte, 537
Electric double-layer capacitor Li batteries utilizing SOC],—SO,Cl,
new solid-state electric double-layer mixed electrolytes, 1
capacitor using poly(vinyl alcohol)- Li rechargeable cell with poly 3-methyl-
based polymer solid electrolyte, 87 thiophene cathode and LiAsF,—
Electrochemical behaviour dimethyl carbonate electrolyte,
of a-cobalted Ni hydroxide electrodes, 561
497 new solid-state electric double-layer
Electrochemical capacitor capacitor using poly(vinyl alcohol)-
solid-ionomer electrochemical capacitor, based polymer solid electrolyte, 87
341 pulse power characteristics of poly(3-
Electrochemical oxidation methylthiophene) cathodes in
of methanol on Pt in phosphoric acid Li(SO,),AICI, electrolyte, 175
solution, 11 Electrolyte management
Electrochemical reduction of molten-carbonate fuel cells, 529
influence of macrocyclic compounds on Electrolyte solutions
electrochemical reduction of thionyl ion solvation in Li battery electrolyte
chloride at glassy carbon cathodes, solutions; solvent effects on Li ion
127 intercalation in Nb triselenide, 17
Electrode(s) Energy efficiency
behaviour of Fe polythiophene positive high energy efficiency and high power
electrodes in Li cells, 557 density PEM fuel cells; electrode
effects of Pt on Ni electrodes in Ni—H, kinetics and mass transport,
cell, 253 299
electrochemical behaviour of a-cobalted
Ni hydroxide electrodes, 497 Fabrication
experimental device for investigations and activation studies of conducting
of formation process of Ni(OH),/ plastic composite electrodes for
NiOOH electrode, 167 redox cells, 29
experimental studies of transition metal Failure modes
chloride electrodes in undivided failure modes of lead/acid batteries,
cells using molten NaAICl, electro- 415
lyte, 537 Formation process
fabrication and activation studies of experimental device for investigations
conducting plastic composite elec- of formation process of Ni(OH),/
trodes for redox cells, 29 NiOOH electrode, 167
impedances of Ni electrodes cycled in
various KOH concentrations, 285 Gold
oxygen electrodes for rechargeable Au cathode in system Li,CO,—CO,—CO
alkaline fuel cells, 323 at 800 to 900 °C, 205
Hydrogen Lead/acid battery technology
effects of Pt on Ni electrodes in Ni—H, modern lead/acid battery technology;
cell, 253 new materials, 461
performance of dual anode Ni—H, cell, Lead/acid system
363 UNESCO expert workshop; theory and
physical and chemical analysis of practice of lead/acid system, Gaus-
Ni—H, cell, 269 sig, F.R.G., Apr. 2—5, 1991, 405
multiple cell common pressure vessel Lead dioxide electrode
(CPV) Ni—H, battery, 375
physicochemical properties and per-
Hydrogen/oxygen fuel cells formance characteristics of PbO,
computer simulation of thermal model- electrode, 439
ling of alkaline hydrogen/oxygen
Lithium
fuel cells, 185 advances in Li—TiS, cell technology,
Hydrothermal curing 395
of lead/acid battery positive plates, 95 Au cathode in system Li,CO,—-CO,-CO
at 800 to 900 °C, 205
Impedances
behaviour of Fe polythiophene positive
of Ni electrodes cycled in various KOH
electrodes in Li cells, 557
concentrations, 285
Li rechargeable cell with poly 3-methyl-
Infrared characterization
thiophene cathode and LiAsF,—
of turbostratic a- and well crystallized
dimethyl carbonate electrolyte,
a*-cobalted Ni hydroxides, 113
561
Ion solvation
pulse power characteristics of poly(3-
in Li battery electrolyte solutions; sol-
methylthiophene) cathodes in
vent effects on Li ion intercalation
Li(SO,)sAICl, electrolyte, 175
in Nb triselenide, 17
Lithium battery(ies)
Iron polythiophene
ion solvation in Li battery electrolyte
behaviour of Fe polythiophene positive
electrodes in Li cells, 557 solutions; solvent effects on Li ion
intercalation in Nb triselenide, 17
Li batteries utilizing SOC],—SO,Cl,
Jet Propulsion Laboratory
Na—metal chloride battery research at mixed electrolytes, 1
JPL, 385 Lithium cyclability
effects of physical constraints on Li
Lead cyclability, 517
effect of Bi on corrosion behaviour of Lithium ion intercalation
Pb in sulphuric acid, 57 solvent effects on Li ion intercalation
Lead/acid battery(ies) in Nb triselenide; Li battery electro-
analysis of conditions that promote lyte solutions, 17
passivation on Ca—alloy grids in
lead/acid batteries, 451
computer aided design of bipolar
lead/acid battery, 155
failure modes of lead/acid batteries, Macrocyclic compounds
415 influence of macrocyclic compounds on
hydrothermal curing of lead/acid electrochemical reduction of thionyl
battery positive plates, 95 chloride at glassy carbon cathodes,
new materials for current-conducting 127
components in lead/acid batteries, Manganese dioxide
473 overcharge protection of MnO, cath-
premature capacity loss in lead/acid odes, 45
batteries; Sb-free effect and related Mass transport
phenomena, 567 high energy efficiency and high power
technological progress in sealed density PEM fuel cells; electrode
lead/acid batteries, 479 kinetics and mass transport, 299
592
Meta! chloride Passivation
Na—metal chloride battery research at analysis of conditions that promote
JPL, 385 passivation on Ca—alloy grids in
Methanol lead/acid batteries, 451
electrochemical oxidation of methanol Performance characteristics
on Pt in phosphoric acid solution, physicochemical properties and per-
1! formance characteristics of PbO,
Mission from Planet Earth electrode, 439
SPE® water electrolyzers in support of Phosphoric acid
Mission from Planet Earth, 219 electrochemical oxidation of methanol
Molten-carbonate fuel cells on Pt in phosphoric acid solution,
effect of operating temperature on per- 11
formance of MCFCs, 69 Phosphoric acid fuel cell assemblies
electrolyte management of MCFCs, 529 physical and chemical state of phos-
phoric acid fuel cell assemblies after
Nickel long term operation; surface and
effects of Pt on Ni electrodes in Ni—H, near-surface analysis, 137
cell, 253 Physical and chemical analysis
experimental device for investigations of Ni-H, cell, 269
of formation process of Ni(OH),/ Physical and chemical state
NiOOH electrode, 167 of phosphoric acid fuel cell assemblies
impedances of Ni electrodes cycled in after long term operation; surface
various KOH concentrations, 285 and near-surface analysis, 137
multiple cell common pressure vessel Physical constraints
Ni-H, battery, 375 effects of physical constraints on Li
performance of dual anode Ni—H, cell, cyclability, 517
363 Physicochemical properties
physical and chemical! analysis of and performance characteristics of
Ni-H, cell, 269
PbO, electrode, 439
Raman spectral observation of ‘new
Plastic composite electrodes
phase’ observed in Ni electrodes
fabrication and activation studies of
cycled to failure, 279
conducting plastic composite elec-
Nickel hydroxide
trodes for redox cells, 29
electrochemical behaviour of a-cobalted
Ni hydroxide electrodes, 497 Platinum
IR characterization of turbostratic a- effects of Pt on Ni electrodes in Ni—H,
and well crystallized a*-cobalted Ni cell, 253
hydroxides, 113 electrochemical oxidation of methanol
Niobium triselenide on Pt in phosphoric acid solution,
solvent effects on Li ion intercalation 11
in Nb triselenide; Li battery electro- Poly(3-methylthiophene)
lyte solutions, 17 Li rechargeable cell with poly 3-methyl-
thiophene cathode and LiAsF,—
dimethyl carbonate electrolyte, 561
Overcharge protection
pulse power characteristics of poly(3-
of MnO, cathodes, 45
Oxygen methylthiophene) cathodes in
computer simulation of thermal modell- Li(SO,),AICl, electrolyte, 175
ing of alkaline hydrogen/oxygen fuel Poly(viny! alcohol)
cells, 185 new solid-state electric double-layer
pyrolyzed macrocycles on high surface capacitor using poly(vinyl alcohol)-
area carbons for reduction of oxy- based polymer solid electrolyte, 87
gen in alkaline fuel cells, 547 Positive plates
Oxygen electrodes hydrothermal curing of lead/acid bat-
for rechargeable alkaline fuel cells, 323 tery positive plates, 95
Power density Space water electrolysis
high energy efficiency and high power space station through advanced mis-
density PEM fuel cells; electrode sions, 235
kinetics and mass transport, 299 SPE® water electrolyzers
Proton exchange membrane fuel cells in support of Mission from Planet
high energy efficiency and high power Earth, 219
density PEM fuel cells; electrode Sulfur
kinetics and mass transport, 299 Li batteries utilizing SOC1,—SO,Cl,
Pulse power characteristics mixed electrolytes, 1
of poly(3-methylthiophene) cathodes in Sulfuric acid
Li(SO,),AICL, electrolyte, 175 effect of Bi on corrosion behaviour of
Pb in sulphuric acid, 57
Pyrolyzed macrocycles
on high surface area carbons for re-
Technological progress
duction of oxygen in alkaline fuel
in sealed lead/acid batteries, 479
cells, 547
Temperature
effect of operating temperature on per-
formance of molten-carbonate fuel
Raman spectral observation cells, 69
of ‘new phase’ observed in Ni elec- Thermal battery
trodes cycled to failure, 279 optimization of externally heated ther-
Rechargeable alkaline fuel cells mal battery, 7
Thermal modelling
oxygen electrodes for rechargeable
computer simulation of thermal modell-
alkaline fuel cells, 323
ing of alkaline hydrogen/oxygen fuel
Redox cells
cells, 185
fabrication and activation studies of
Thionyl chloride
conducting plastic composite elec-
influence of macrocyclic compounds on
trodes for redox cells, 29 electrochemical reduction of thionyl
chloride at glassy carbon cathodes,
127
Sodium Titanium
advances in Li—TiS, cell technology,
experimental studies of transition metal
395
chloride electrodes in undivided
Transition metal chloride electrodes
cells using molten NaAICl, electro-
experimental studies of transition metal
lyte, 537
chloride electrodes in undivided
Na—metal chloride battery research at
cells using molten NaAICl, electro-
JPL, 385 lyte, 537
Solvent effects
on Li ion intercalation in Nb triselen- Water electrolysis
ide; Li battery electrolyte solutions, space water electrolysis; space station
17 through advanced missions, 235
Space station Water electrolyzers
space water electrolysis; space station SPE® water electrolyzers in support of
through advanced missions, 235 Mission from Planet Earth, 219