Table Of Content

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 197 (2008) 449-450 available at www.sciencedirect.com “°S* ScienceDirect journal homepage: www.elsevier.com/locate/jmatprotec Author Index of Volume 197 Achyutha, B.T., 225 Guo, J., 101 Ludovico, A.D., 301 Aghakouchak, A.A., 140 Guo, Y.B., 189 Luo, D., 151 Aid, A., 250 Alba, F., 161 Halali, M., 156 Maggiolino, S., 237 Amrouche, A., 250 He, J., 31 Mangalaraja, R.V., 292 Ashkezari, G.D., 140 Hiziroglu, S., 445 Martinez-de-Pison, FJ., 161 Attanasio, A., 59 Holzleitner, J., 363 Martinez-Salazar, J., 221 Hu, W., 77 Marya, S., 337 Bamberg, E., 419 Hu, X., 43, 206 Mazzoni, L., 59 Banerjee, S., 306 Hua, Z.Z., 77 Mei, P.R., 374 Barrera, M.A., 221 Huang, B.-C., 68 Mesmacque, G., 250 Barreto, C., 161 Huang, Y., 43 Mukherjee, S.K., 17 Basheer, A.C., 439 Huneau, B., 337 Munoz, A.C., 337 Bera, J., 279 Hwu, W.-H., 284 Muthukumaran, S., 17 Bhanuprasad, V.V., 439 Bittencout, F.R., 344 lida, Y., 261 Nagano, M.S., 1 Nagaumi, H., 109 Camurri, C.P., 292 Jha, G.C., 434 Najarian, S., 174 Cao, M., 151 Jin, Q., 212 Nath, A.K., 434 Casalino, G., 301 Jing, W., 54 Ni, J., 393 Ceretti, E., 59 Joshi, S.S., 439 Chang, C.-P., 284 Obieglo, A., 363 Chen, C., 206 Omar, M.A., 363 Chen, W., 36 Kan, S.M., 445 Otto, M., 49 Cheng, L., 170 Kaneko, Y., 261 Ozer, A., 182 Chou, C.P., 116 Kanno, Y., 261 Cui, J., 109 Karnik, S.R., 225 Paramaputi, P., 132 Khamba, J.S., 200 Pernia, A., 161 Dabade, U.A., 439 Kim, H.S., 393 Pourboghrat, F., 379 Datta, C.K., 241 Koc, M., 393 Dehlaghi, V., 174 Kokabi, M., 140 Qin, G.H., 122 Dong, Y., 31 Kolhe, K.P., 241 Ducher, F., 10 Koric, S., 408 Qu, J., 212 Kumruoglu, L.C., 182 Dutta, T., 306 Rahmat, A.R., 22 Erdmann, M., 363 Lai, H.W., 445 Rakwal, D., 419 Li, J., 101 Ramam, K.V.S., 292 Feng, S., 296 Li, W., 36 Raval, H.K., 268 Framinan, J.M., 1 Li, X., 31 Ravi, J., 292 Rojananan, S., 132 Li, Y., 325 Gadre, V.M., 439 Li, Y.-M., 170 Roy, P.K., 279 Gaitonde, V.N., 225 Li, Z., 325 Roy, S.K., 434 Gandhi, A.H., 268 Liao, R.-H., 170 Riickert, G., 337 Gao, T., 255 Lin, C.J., 445 Ger, M.-D., 284 Lin, F.-L., 68 Sangghaleh, A., 156 Ghosal, S., 306 Lin, H.-W., 284 Sasaki, T., 89 Giardini, C., 59 Liu, H., 151 Sauvage, X., 337 Gorni, A.A., 374 Liu, N., 36 Schmid, C., 237 Grujicic, M., 363 Liu, X.Y., 428 Sedighi, M., 314 Gu, X.-Y., 170 Lu, H., 101, 206 Sellappan, V., 363 Guan, Y., 379 Luan, B., 428 Seyr, N., 363 Elsevier B.V. doi:10.1016/S0924-0136(07)01355-6 450 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 196 (2008) 449-450 Shadpoor, M.T., 174 Waikar, R.A., 189 Yan, D., 31 Shen, Z., 151 Wan Abdul Rahman, W.A., 22 Yang, H., 36, 206, 255, 296 Siddeswarappa, B., 225 Wan, M., 122 Yao, L.G., 77 Sin, L.T., 22 Wan, Y., 96 Yao, Z., 151 Singh, R., 200 Wang, C.-A., 43 Yichao, D., 54 Sinha, P., 17 Wang, H., 43 Yisan, W., 54 Su, M., 250 Wang, J.F., 428 Yuli, L., 255 Sun, H., 206 Wang, J.-P., 68 Yun, C.-C., 68 Wang, S.C., 116 Wu, Z., 151 Zarate, L.E., 344 Tabourot, L., 10 Zhang, J., 31 Tan, G., 122 Xiong, D.-S., 96 Zhang, R., 43 Thipprakmas, S., 132 Xu, B., 212 Zhang, W.H., 122 Thomas, B.G., 408 Xu, H., 296 Zhang, Y.-P., 170 Tokmechi, S., 314 Xu, W., 296 Zhang, Z., 325 Toussaint, F., 10 Xu, Z., 101 Zhou, J., 325 Zhu, R., 325 Vega, J.F., 221 Yakou, T., 89 Zuo, Y., 109 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 197 (2008) 451-457 available at www.sciencedirect.com "eS" ScienceDirect journal homepage: www.elsevier.com/locate/jmatprotec Subject Index of Volume 197 Activated TIG Anisotropic behaviour Comparison of TIG welded and friction stir welded Experimental and numerical analysis of the forming Al-+4.5Mg-0.26Sc alloy, 337 process of a CP titanium scoliotic instrumentation, Adaptive response surface method 10 Optimization of sheet metal forming processes by Artificial neural networks adaptive response surface based on intelligent Modeling of surface roughness in precision machining sampling method, 77 of metal matrix composites using ANN, 439 Additional radial compressive stress Asymmetric parts Extending the process limits at a collar forming Asymmetric two points incremental forming: process, 49 Improving surface quality and geometric accuracy Air boundary layer by tool path optimization, 59 Development of a simple technique for improving the Automotive structural components efficacy of fluid flow through the grinding zone, An overview of the polymer-to-metal direct-adhesion 306 hybrid technologies for load-bearing automotive Al-Mg-Sc alloy components, 363 Comparison of TIG welded and friction stir welded Al-4.SMg-0.26Sc alloy, 337 Backward simulation ALO,-TiO, coating Influence of dynamic boundary conditions on preform Microstructure characteristics of Al,O,-13 wt.% TiO, design for deformation uniformity in backward coating plasma spray deposited with simulation, 255 nanocrystalline powders, 31 Bauxite tailings Alumina Influence of heat-treatment schedule on An investigation on the wetting of polycrystalline crystallization and microstructure of bauxite tailing alumina by aluminium, 156 glass-ceramics coated on tiles, 206 Comparison of slurry effect on machining Bending characteristics of titanium in ultrasonic drilling, Experimental and numerical analysis of the forming 200 process of a CP titanium scoliotic instrumentation, 10 Aluminium Betel palm stem An investigation on the wetting of polycrystalline Manufacturing particleboard panels from betel palm alumina by aluminium, 156 (Areca catechu Linn.), 445 Aluminium alloy Boron carbide Corrosion resistance in FSW and in MIG welding Comparison of slurry effect on machining techniques of AA6XXX, 237 characteristics of titanium in ultrasonic drilling, 200 Aluminizing Buckling mechanism Tool wear and surface roughness during machining of Study of edge effect and multi-curvature in laser high-temperature aluminized steel, 89 bending of AISI 304 stainless steel, 434 Aluminum Burr size Fourier series based finite element analysis of tube Genetic algorithm-based burr size minimization in hydroforming—Generalized plane strain model, drilling of AISI 316L stainless steel, 225 379 Al-Zn-Mg-Cu alloy CAD-CAM design Study on the sump and temperature field during low Asymmetric two points incremental forming: frequency electromagnetic casting a superhigh Improving surface quality and geometric accuracy strength Al-Zn-Mg-Cu alloy, 109 by tool path optimization, 59 Analytical model Ce** Development of an analytical model for warm deep Magnetic properties of Ce,Gd-substituted yttrium iron drawing of aluminum alloys, 393 garnet ferrite powders fabricated using a sol-gel Analytical study method, 296 Analytical and empirical modeling of top roller Central composite rotatable design of experiments position for three-roller cylindrical bending of Genetic algorithm-based burr size minimization in plates and its experimental verification, 268 drilling of AISI 316L stainless steel, 225 Elsevier B.V. doi:10.1016/S0924-0136(07)01356-8 452 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 197 (2008) 451-457 Ceramics CVN test Processing and dielectric properties of Bi-doped Prediction of microstructure and mechanical St(Tip 95Zo.9s)O, Ceramics, 151 properties of multipass SAW, 241 Characterization of nanocrystalline NiCuZn ferrite powders synthesized by sol-gel auto-combustion 3D numerical simulation method, 279 Three-dimensional modelling of flow curves in co- Coating rotating twin-screw extruder elements, 221 Influence of heat-treatment schedule on Data mining crystallization and microstructure of bauxite tailing Modelling of an elastomer profile extrusion process glass-ceramics coated on tiles, 206 using support vector machines (SVM), 161 Cold rolling process DC casting Representation and control of the cold rolling process Study on the sump and temperature field during low through artificial neural networks via sensitivity frequency electromagnetic casting a superhigh factors, 344 strength Al-Zn-Mg-Cu alloy, 109 Collar forming process Deep drawing Extending the process limits at a collar forming Development of an analytical model for warm deep process, 49 drawing of aluminum alloys, 393 Composite Deformation uniformity Characterization of a powder metallurgy SiC/Cu-Al Influence of dynamic boundary conditions on preform composite, 43 design for deformation uniformity in backward Computational fluid dynamics simulation, 255 Analysis of wall shear stress in stented coronary artery Degree of cold expansion using 3D computational fluid dynamics modeling, Numerical study of the optimum degree of cold 174 expansion: Application for the pre-cracked Computer simulation specimen with the expanded hole at the crack tip, 250 Investigation of critical liquid fraction factor in nodular Density iron castings by computer simulation, 182 Characterization of a powder metallurgy SiC/Cu-Al Constitutive model composite, 43 Parameter identification of superplastic constitutive Dielectric properties model by GA-based global optimization method, 212 Processing and dielectric properties of Bi-doped A mixtures-based model for the grain size dependent St(Tip 9¢ZTp 9<)O, ceramics, 151 mechanical behavior of nanocrystalline materials, Discharge energy density 325 Experimental investigation of wire electrical discharge Constitutive models machining of gallium-doped germanium, 419 Thermo-mechanical models of steel solidification Drilling based on two elastic visco-plastic constitutive laws, Genetic algorithm-based burr size minimization in 408 drilling of AISI 316L stainless steel, 225 Contact analysis Fourier series based finite element analysis of tube ECAE hydroforming—Generalized plane strain model, 379 Effect of adding Sc and Zr on grain refinement and Contact angle ductility of AZ31 magnesium alloy, 116 An investigation on the wetting of polycrystalline Edge effect alumina by aluminium, 156 Study of edge effect and multi-curvature in laser Controlled rolling bending of AISI 304 stainless steel, 434 Effect of controlled-rolling parameters on the ageing Elastic behavior response of HSLA-80 steel, 374 A mixtures-based model for the grain size dependent Coolant supply nozzle mechanical behavior of nanocrystalline materials, Development of a simple technique for improving the 325 efficacy of fluid flow through the grinding zone, 306 Elastic-visco-plastic material Copper Thermo-mechanical models of steel solidification based Effect of controlled-rolling parameters on the ageing on two elastic visco-plastic constitutive laws, 408 response of HSLA-80 steel, 374 Elastomer extrusion Coronary artery Modelling of an elastomer profile extrusion process Analysis of wall shear stress in stented coronary artery using support vector machines (SVM), 161 using 3D computational fluid dynamics modeling, Electrical discharge machining 174 Experimental investigation of wire electrical discharge Co-rotating twin-screw extruder machining of gallium-doped germanium, 419 Three-dimensional modelling of flow curves in co- Electrical properties rotating twin-screw extruder elements, 221 Characterization of nanocrystalline NiCuZn ferrite Corrosion powders synthesized by sol-gel auto-combustion Corrosion resistance in FSW and in MIG welding method, 279 techniques of AA6XXX, 237 Electrochromic devices Cutting force model Fabrication of pulsed-laser deposited V,O, thin films Systematic simulation procedure of peripheral milling for electrochromic devices, 261 process of thin-walled workpiece, 122 Electromechanical properties Cutting temperature Piezoelectric and dielectric properties of PbNb,O,- Tool wear and surface roughness during machining of based piezoelectric ceramics with high Curie high-temperature aluminized steel, 89 temperature, 170 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 197 (2008) 451-457 Electrostatic separation Friction stir welding Movement behavior in electrostatic separation: Corrosion resistance in FSW and in MIG welding Recycling of metal materials from waste printed techniques of AA6XXX, 237 circuit board, 101 Comparison of TIG welded and friction stir welded Empirical modeling Al+4.SMg-0.26Sc alloy, 337 Analytical and empirical modeling of top roller Frictional performance position for three-roller cylindrical bending of The effect of laser surface texturing on frictional plates and its experimental verification, 268 performance of face seal, 96 Equivalent von Mises stress Fusion welding Numerical study of the optimum degree of cold Comparison of TIG welded and friction stir welded expansion: Application for the pre-cracked specimen Al-4.SMg-0.26Sc alloy, 337 with the expanded hole at the crack tip, 250 F-value approach Extended process limits A new experimental approach to evaluate friction in Extending the process limits at a collar forming ring test, 68 process, 49 Gd3* FEM Magnetic properties of Ce,Gd-substituted yttrium iron Influence of dynamic boundary conditions on preform garnet ferrite powders fabricated using a sol-gel design for deformation uniformity in backward method, 296 simulation, 255 Genetic algorithm Ferrite Genetic algorithm-based burr size minimization in Magnetic properties of Ce,Gd-substituted yttrium iron drilling of AISI 316L stainless steel, 225 garnet ferrite powders fabricated using a sol-gel Glass—ceramic method, 296 Influence of heat-treatment schedule’ on Fe-(Ti, V)C composite crystallization and microstructure of bauxite tailing Reaction synthesis of Fe-(Ti,V)C composites, 54 glass-ceramics coated on tiles, 206 Fiber reinforced elastomeric isolator Global optimization Design, manufacturing and evaluation of the Parameter identification of superplastic constitutive performance of steel like fiber reinforced model by GA-based global optimization method, 212 elastomeric seismic isolators, 140 Grain refinement Finite element analysis Effect of adding Sc and Zr on grain refinement and Finite element simulation of high speed pulse welding ductility of AZ31 magnesium alloy, 116 of high specific strength metal alloys, 301 Grinding zone fluid flow Development of an analytical model for warm deep Development of a simple technique for improving the drawing of aluminum alloys, 393 efficacy of fluid flow through the grinding zone, Finite element method (FEM) 306 An investigation of step taper-shaped punch in piercing process using finite element method, 132 Heat-affected zone Finite element model Prediction of microstructure and mechanical Performance of Ti(C,N)-based cermets cutter and properties of multipass SAW, 241 simulation technique of cutting process, 36 Heat-treatment schedule Finite elements Influence of heat-treatment schedule on Three-dimensional modelling of flow curves in co- crystallization and microstructure of bauxite tailing rotating twin-screw extruder elements, 221 glass-ceramics coated on tiles, 206 Fourier series based finite element analysis of tube Heuristic algorithm hydroforming—Generalized plane strain model, 379 Evaluating the performance for makespan Thermo-mechanical models of steel solidification minimisation in no-wait flowshop sequencing, 1 based on two elastic visco-plastic constitutive laws, High Curie temperature 408 Piezoelectric and dielectric properties of PbNb,O,- Finite volume method based piezoelectric ceramics with high Curie A new approach to preform design in forging process temperature, 170 of complex parts, 314 High specific strength alloys Flow analysis Finite element simulation of high speed pulse welding Injection moulding simulation analysis of natural fiber of high specific strength metal alloys, 301 composite window frame, 22 High speed pulse welding Flowshop Finite element simulation of high speed pulse welding Evaluating the performance for makespan of high specific strength metal alloys, 301 minimisation in no-wait flowshop sequencing, 1 High speed steel Forging Comparison of slurry effect on machining A new approach to preform design in forging process characteristics of titanium in ultrasonic drilling, of complex parts, 314 200 Fourier series Horizontal test Fourier series based finite element analysis of tube Design, manufacturing and evaluation of the hydroforming—Generalized plane strain model, performance of steel like fiber reinforced 379 elastomeric seismic isolators, 140 Friction stir welding HSLA-80 steel Analysis of first mode of metal transfer in friction stir Effect of controlled-rolling parameters on the ageing welded plates by image processing technique, 17 response of HSLA-80 steel, 374 454 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 197 (2008) 451-457 Image processing Makespan Analysis of first mode of metal transfer in friction stir Evaluating the performance for makespan welded plates by image processing technique, 17 minimisation in no-wait flowshop sequencing, 1 A new experimental approach to evaluate friction in Material removal rate ring test, 68 Comparison of slurry effect on machining Improved preform characteristics of titanium in ultrasonic drilling, 200 A new approach to preform design in forging process Measurement by strain gage of complex parts, 314 A new experimental approach to evaluate friction in In situ generation ring test, 68 Reaction synthesis of Fe-(Ti,V)C composites, 54 Mechanical properties Increased hole expansion ratio Comparison of TIG welded and friction stir welded Extending the process limits at a collar forming Al-4.SMg-0.26Sc alloy, 337 process, 49 Metal cutting Injection moulding Tool wear and surface roughness during machining of Injection moulding simulation analysis of natural fiber high-temperature aluminized steel, 89 composite window frame, 22 Metal flow Instantaneous uncut chip thickness Analysis of first mode of metal transfer in friction stir Systematic simulation procedure of peripheral milling welded plates by image processing technique, 17 process of thin-walled workpiece, 122 Metal materials Intermetallic compound Movement behavior in electrostatic separation: Tool wear and surface roughness during machining of Recycling of metal materials from waste printed high-temperature aluminized steel, 89 circuit board, 101 Inverse analysis Metal matrix composites design of experiments Parameter identification of superplastic constitutive Modeling of surface roughness in precision machining model by GA-based global optimization method, 212 of metal matrix composites using ANN, 439 Metamodel Laser bending Optimization of sheet metal forming processes by Study of edge effect and multi-curvature in laser adaptive response surface based on intelligent bending of AISI 304 stainless steel, 434 sampling method, 77 Laser texturing Microhardness The effect of laser surface texturing on frictional Prediction of microstructure and mechanical performance of face seal, 96 properties of multipass SAW, 241 Lead metaniobate Micropore Piezoelectric and dielectric properties of PbNb,O,- The effect of laser surface texturing on frictional based piezoelectric ceramics with high Curie performance of face seal, 96 temperature, 170 Microstructure Lightweight material Microstructure characteristics of Al,O,-13 wt.% TiO, Development of an analytical model for warm deep coating plasma _ spray deposited with drawing of aluminum alloys, 393 nanocrystalline powders, 31 Liquid fraction Characterization of a powder metallurgy SiC/Cu-Al Investigation of critical liquid fraction factor in nodular composite, 43 iron castings by computer simulation, 182 Reaction synthesis of Fe-(Ti,V)C composites, 54 Low frequency electromagnetic field Comparison of TIG welded and friction stir welded Study on the sump and temperature field during low Al+4.5Mg-0.26Sc alloy, 337 frequency electromagnetic casting a superhigh Microwave-citrate-gel decomposition strength Al-Zn-Mg-Cu alloy, 109 Synthesis of nanocrystalline yttria by microwave- assisted citrate-gel decomposition technique, 292 Machinability Moldflow Tool wear and surface roughness during machining of Injection moulding simulation analysis of natural fiber high-temperature aluminized steel, 89 composite window frame, 22 Machining Multi-curvature A comprehensive characterization of 3D surface Study of edge effect and multi-curvature in laser topography induced by hard turning versus bending of AISI 304 stainless steel, 434 grinding, 189 Magnesium alloys Nanocrystalline Effect of adding Sc and Zr on grain refinement and Synthesis of nanocrystalline yttria by microwave- ductility of AZ31 magnesium alloy, 116 assisted citrate-gel decomposition technique, 292 Magnetic materials Nanocrystalline materials Characterization of nanocrystalline NiCuZn ferrite A mixtures-based model for the grain size dependent powders synthesized by sol-gel auto-combustion mechanical behavior of nanocrystalline materials, 325 method, 279 Nanoparticles Magnetic properties Magnetic properties of Ce,Gd-substituted yttrium iron Characterization of nanocrystalline NiCuZn ferrite garnet ferrite powders fabricated using a sol-gel powders synthesized by sol-gel auto-combustion method, 296 method, 279 Nanostructured coatings Magnetic properties of Ce,Gd-substituted yttrium iron Microstructure characteristics of Al,O,-13 wt.% TiO, garnet ferrite powders fabricated using a sol-gel coating plasma spray deposited with method, 296 nanocrystalline powders, 31 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 197 (2008) 451-457 Natural fiber composite Polymer impregnation Injection moulding simulation analysis of natural fiber Fabrication of Ti/polymer biocomposites for load- composite window frame, 22 bearing implant applications, 428 Neural networks Polymer metal adhesion Representation and control of the cold rolling process An overview of the polymer-to-metal direct-adhesion through artificial neural networks via sensitivity hybrid technologies for load-bearing automotive factors, 344 components, 363 Nodular cast iron Polymer metal hybrids Investigation of critical liquid fraction factor in nodular An overview of the polymer-to-metal direct-adhesion iron castings by computer simulation, 182 hybrid technologies for load-bearing automotive No-wait components, 363 Evaluating the performance for makespan Porous Ti minimisation in no-wait flowshop sequencing, 1 Fabrication of Ti/polymer biocomposites for load- Numerical simulation bearing implant applications, 428 Experimental and numerical analysis of the forming Position of instability process of a CP titanium scoliotic instrumentation, Numerical study of the optimum degree of cold 10 expansion: Application for the pre-cracked Performance of Ti(C,N)-based cermets cutter and specimen with the expanded hole at the crack tip, simulation technique of cutting process, 36 250 Powder metallurgy Optimum rake angle Characterization of a powder metallurgy SiC/Cu-Al Performance of Ti(C,N)-based cermets cutter and composite, 43 simulation technique of cutting process, 36 Reaction synthesis of Fe-(Ti,V)C composites, 54 Precipitation hardening Parameter identification Effect of controlled-rolling parameters on the ageing Parameter identification of superplastic constitutive response of HSLA-80 steel, 374 model by GA-based global optimization method, 212 Predictive model Parametric design Representation and control of the cold rolling process A new approach to preform design in forging process through artificial neural networks via sensitivity of complex parts, 314 factors, 344 Particle shape Preform design Movement behavior in electrostatic separation: Influence of dynamic boundary conditions on preform Recycling of metal materials from waste printed design for deformation uniformity in backward circuit board, 101 simulation, 255 Particle swarm optimization intelligent sampling Principal components analysis Optimization of sheet metal forming processes by Modelling of an elastomer profile extrusion process adaptive response surface based on intelligent using support vector machines (SVM), 161 sampling method, 77 Printed circuit board Particleboard Movement behavior in electrostatic separation: Manufacturing particleboard panels from betel palm Recycling of metal materials from waste printed (Areca catechu Linn.), 445 circuit board, 101 Paste Pulsed-laser deposition The rheological behaviors of screen-printing pastes, Fabrication of pulsed-laser deposited V,O, thin films 284 for electrochromic devices, 261 Peripheral milling PV value Systematic simulation procedure of peripheral milling The effect of laser surface texturing on frictional process of thin-walled workpiece, 122 performance of face seal, 96 Phase analysis Prediction of microstructure and mechanical Real-time measuring properties of multipass SAW, 241 A new experimental approach to evaluate friction in Piercing ring test, 68 An investigation of step taper-shaped punch in Recycling piercing process using finite element method, 132 Movement behavior in electrostatic separation: Piezoelectric properties Recycling of metal materials from waste printed Piezoelectric and dielectric properties of PbNb,O,- circuit board, 101 based piezoelectric ceramics with high Curie Regeneration mechanism temperature, 170 Systematic simulation procedure of peripheral milling Plane strain process of thin-walled workpiece, 122 Fourier series based finite element analysis of tube Response surface methodology hydroforming—Generalized plane strain model, 379 Genetic algorithm-based burr size minimization in Plasma spray drilling of AISI 316L stainless steel, 225 Microstructure characteristics of Al,O,-13 wt.% TiO, Restenosis coating plasma spray deposited with Analysis of wall shear stress in stented coronary artery nanocrystalline powders, 31 using 3D computational fluid dynamics modeling, Plastic deformation 174 A mixtures-based model for the grain size dependent Rheology mechanical behavior of nanocrystalline materials, The rheological behaviors of screen-printing pastes, 325 284 456 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 197 (2008) 451-457 Rice husk Stainless steel Injection moulding simulation analysis of natural fiber Comparison of slurry effect on machining composite window frame, 22 characteristics of titanium in ultrasonic drilling, Ring test 200 A new experimental approach to evaluate friction in Static form error ring test, 68 Systematic simulation procedure of peripheral milling Roller bending process of thin-walled workpiece, 122 Analytical and empirical modeling of top roller Steel casting position for three-roller cylindrical bending of Thermo-mechanical models of steel solidification plates and its experimental verification, 268 based on two elastic visco-plastic constitutive laws, Rolling 408 Effect of adding Sc and Zr on grain refinement and Steel industry ductility of AZ31 magnesium alloy, 116 Representation and control of the cold rolling process through artificial neural networks via sensitivity SAW factors, 344 Prediction of microstructure and mechanical Stent properties of multipass SAW, 241 Analysis of wall shear stress in stented coronary artery Scandium using 3D computational fluid dynamics modeling, Effect of adding Sc and Zr on grain refinement and 174 ductility of AZ31 magnesium alloy, 116 Strontium titanate Screen-printing Processing and dielectric properties of Bi-doped The rheological behaviors of screen-printing pastes, St(Tip 952 9<)O, ceramics, 151 284 Subsurface damage Seismic isolation Experimental investigation of wire electrical discharge Design, manufacturing and evaluation of the machining of gallium-doped germanium, 419 performance of steel like fiber reinforced Sump elastomeric seismic isolators, 140 Study on the sump and temperature field during low Sessile drop frequency electromagnetic casting a superhigh An investigation on the wetting of polycrystalline strength Al-Zn-Mg-Cu alloy, 109 alumina by aluminium, 156 Support vector machines Shaving Modelling of an elastomer profile extrusion process An investigation of step taper-shaped punch in using support vector machines (SVM), 161 piercing process using finite element method, Surface integrity 132 A comprehensive characterization of 3D surface Shear stress topography induced by hard turning versus Analysis of wall shear stress in stented coronary artery grinding, 189 using 3D computational fluid dynamics modeling, Surface roughness 174 Modeling of surface roughness in precision machining Sheet metal forming of metal matrix composites using ANN, 439 Optimization of sheet metal forming processes by Surface topography adaptive response surface based on intelligent A comprehensive characterization of 3D surface sampling method, 77 topography induced by hard turning versus SiC/Cu-Al grinding, 189 Characterization of a powder metallurgy SiC/Cu-Al Synthesis composite, 43 Synthesis of nanocrystalline yttria by microwave- Silicon carbide assisted citrate-gel decomposition technique, 292 Comparison of slurry effect on machining characteristics of titanium in ultrasonic drilling, 200 Taper punch Single crystal germanium An investigation of step taper-shaped punch in Experimental investigation of wire electrical discharge piercing process using finite element method, 132 machining of gallium-doped germanium, 419 Temperature field Sintering Study on the sump and temperature field during low Fabrication of Ti/polymer biocomposites for load- frequency electromagnetic casting a superhigh bearing implant applications, 428 strength Al-Zn-Mg-Cu alloy, 109 Slicing rate Temperature gradient mechanism Experimental investigation of wire electrical discharge Study of edge effect and multi-curvature in laser machining of gallium-doped germanium, 419 bending of AISI 304 stainless steel, 434 Solidification Temperature measurement Investigation of critical liquid fraction factor in nodular Study on the sump and temperature field during low iron castings by computer simulation, 182 frequency electromagnetic casting a superhigh Solidification and melting strength Al-Zn-Mg-Cu alloy, 109 Thermo-mechanical models of steel solidification Thermo-mechanical processes based on two elastic visco-plastic constitutive laws, Thermo-mechanical models of steel solidification 408 based on two elastic visco-plastic constitutive laws, Springback 408 Analytical and empirical modeling of top roller Thin film position for three-roller cylindrical bending of Fabrication of pulsed-laser deposited VO, thin films plates and its experimental verification, 268 for electrochromic devices, 261 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 197 (2008) 451-457 Thin-walled workpiece Ultrasonic drilling Systematic simulation procedure of peripheral milling Comparison of slurry effect on machining process of thin-walled workpiece, 122 characteristics of titanium in ultrasonic drilling, 200 Ti/polymer composites Uncertainty analysis Fabrication of Ti/polymer biocomposites for load- Analytical and empirical modeling of top roller bearing implant applications, 428 position for three-roller cylindrical bending of Ti(C,N)-based cermets plates and its experimental verification, 268 Performance of Ti(C,N)-based cermets cutter and Urea formaldehyde resin simulation technique of cutting process, 36 Manufacturing particleboard panels from betel palm Titanium (Areca catechu Linn.), 445 Experimental and numerical analysis of the forming process of a CP titanium scoliotic instrumentation, Vertical test 10 Design, manufacturing and evaluation of the Comparison of slurry effect on machining performance of steel like fiber reinforced characteristics of titanium in ultrasonic drilling, 200 elastomeric seismic isolators, 140 Tool life Virtual sensor Tool wear and surface roughness during machining of Representation and control of the cold rolling process high-temperature aluminized steel, 89 through artificial neural networks via sensitivity Tool path optimization factors, 344 V,0, Asymmetric two points incremental forming: Improving surface quality and geometric accuracy Fabrication of pulsed-laser deposited V,O, thin films by tool path optimization, 59 for electrochromic devices, 261 Tool wear Tool wear and surface roughness during machining of Warm forming high-temperature aluminized steel, 89 Development of an analytical model for warm deep Tool wear rate drawing of aluminum alloys, 393 Comparison of slurry effect on machining Wetting characteristics of titanium in ultrasonic drilling, 200 An investigation on the wetting of polycrystalline Tube hydroforming alumina by aluminium, 156 Fourier series based finite element analysis of tube Window frame hydroforming—Generalized plane strain model, 379 Injection moulding simulation analysis of natural fiber Turning composite window frame, 22 Tool wear and surface roughness during machining of high-temperature aluminized steel, 89 YIG Two points incremental forming Magnetic properties of Ce,Gd-substituted yttrium iron Asymmetric two points incremental forming: garnet ferrite powders fabricated using a sol-gel Improving surface quality and geometric accuracy method, 296 by tool path optimization, 59 Yttria Synthesis of nanocrystalline yttria by microwave- Ultimate stress assisted citrate-gel decomposition technique, 292 Numerical study of the optimum degree of cold expansion: Application for the pre-cracked Zirconium specimen with the expanded hole at the crack tip, Effect of adding Sc and Zr on grain refinement and 250 ductility of AZ31 magnesium alloy, 116