Journal of Materials Processing Technology 2007: Vol 192-193 Table of Contents

2007·0.93 MB·English

Journal of
Materials
Processing
Technology
ELSEVIER
Volumes 192-193, 1 October 2007
Contents
Process design for closed-die forg ing of bevel gear by finite element analyses
1.-H. Song, Y.-T. Im
Fluid-pressure-assisted deep drawing
S. Thiruvarudchelvan, MJ. Tan
\ flexible shear spinning of axi-symmetrical shells with a general-purpose mandrel
K. Kawai, L.-N. Yang, H. Kudo
Influence of embossing and restoration on the mechanical properties of aluminum alloy sheets
C.S. Namoco Jr., T. lizuka, N. Hatanaka, N. Takakura, K. Yamaguchi
3D nano-scale cutting model for nickel material
Z.-C. Lin, J.-C. Huang, Y.-R. Jeng
Parametric study on thrust force of core drill
Cf Tsao, H. Hocheng
Empirical analysis of cutting force constants in micro-end-milling operations
G. Newby, S. Venkatachalam, S.Y. Liang
Development of cBN ball-nosed end mill with newly designed cutting edge
M. Jin, |.G oto, T. Watanabe, J.-i. Kurosawa, M. Murakawa
Characteristics of ZnO thin film deposited by ion beam sputter
H.-Y. Tsai
Photocatalytic activity of doped TiO, coatings prepared by sputtering deposition
S.-M. Chiu, Z.-S. Chen, K.-Y. Yang, Y.-L. Hsu, D. Gan
The study of rapid prototyping process with embedded functional inserts
Y.S. Liao, H.C. Li, M.T. Chen
Development of epoxy matrix composites for rapid tooling applications
S. Ma, Ll. Gibson, G. Balaji, QJ. Hu
Investigations into the effects of electron beam welding on thick Ti-6AI-4V titanium alloy
N. Saresh, M.G. Pillai, J. Mathew
Surface transformation of DF-2 steel after continuous mode laser irradiation
M. Hua, SeDao, T.M. Shao, H.Y. Tam
In vitro study of bone-like apatite coatings on metallic fiber braids
J.-H. Lin, C.-W. Lou, C.-H. Chang, Y.-S. Chen, G.-T. Lin, C.-H. Lee
Processing of thin metal strip by casting-cum-rolling
S.X. Zhang, H.M. Myo, K.B. Lim, K.K. Tong, M.S. Yong, S.F. Pook, M.W. Fu
Casting of wire-inserted composite aluminum alloy strip using a twin roll caster
I. Haga, K. Takahashi, H. Watari, S.K umai
he effect of solidification time in squeeze casting of aluminium and zinc alloys
LJ. Yang
Study of deformation homogeneity in the multi-pass equal channel angular extrusion process
Y.W. Tham, M.W. Fu, H.H. Hng, M.S. Yong, K.B. Lim
Study on flanged shapes in fineblanked-hole flanging process (FB-hole flanging process) using finite element method (FEM)
S. Thipprakmas, M. Jin, M. Murakawa
Elsevier B.V
Contents
Analysis acoustic emission and sound during the paperboard of cutting process
Y. Fukuzawa, S. Nagasawa, S. Suzuki, I. Katayama, A. Sadamoto
An investigation of cutting forces and surface damage in high-speed turning of Inconel 718
R.S. Pawade, S.S. Joshi, P.K. Brahmankar, M. Rahman
Effectiveness of uncoated WC-Co and PCD inserts in end milling of titanium alloy—Ti-6AI-4\V
A.K.M.N. Amin, A.F. Ismail, M.K. Nor Khairusshima
4 study on ultrasonic vibration cutting of iow alloy steel
C. Nath, M. Rahman, S.S.K. Andrew
Surface finish and integrity of machined surfaces on Al/SiCp composites
U.A. Dabade, S.S. Joshi, R. Balasubramaniam, V.V. Bhanuprasad
Pocketing toolpath optimization for sharp corners
Z.Y. Zhao, C.Y. Wang, H.M. Zhou, Z. Qin
Tool design for the tubular press forming of a rear suspension member with the finite element analysis
S.-H. Kim
Investigation into cold extrusion of aluminum billets using three-dimensional finite element method
D.-C. Chen, S.-K. Syu, C.-H. Wu, S.-K. Lin
Toolpath generation for diamond shaping of aspheric lens array
C.-C.A. Chen, C.-M. Chen, J.-R. Chen
Analysis of draw-wall wrinkling in the stamping of a motorcycle oil tank
F.-K. Chen, Y.-C. Liao
Tool-based micro-machining
4.B.M.A. Asad, T. Masaki, M. Rahman, H.S. Lim, Y.S. Wong
Nanopatterning mask fabrication by femtosecond laser irradiation
Y. Zhou, M.H. Hong, J.Y.H. Fuh, L. Lu, B.S. Luk’ yanchuk, C.S. Lim, Z.B. Wang
Calculation of strain gradient in flow formulation using strain surface function and its applications to micro rolling
S.M Byon, Y. Lee
Nanocrystalline grain size control for Ni,.Fe,,/Cu micro-composite wires by different electrodeposition methods
H.L. Seet, X.P. Li, K.S. Lee, H.Y. Chia
Manufacture of three-dimensional valveless micropump
Y.-L. Cheng, J.-H. Lin
An investigation of material flow analysis in fineblanking process
S. Thipprakmas, M. Jin, M. Murakawa
Experiments on T-shape hydroforming with counter punch
Y.M. Hwang, T.C. Lin, W.C. Chang
High pressure diecasting module of InteCAST software and its applications
J.X. Zhou, L.L. Chen, D.M. Liao, R.X Liu
Synthesis of complex ceramics by mechanochemical activation
T. Sritharan, F.Y.C. Boey, A. Srinivas
Transfer molding of bamboo
O. Yamashita, Yokochi, H. Imanishi, K. Kanayama
Effect of surface hardness of counter plate on crushing of blade tip during pushing shear of paperboard
S. Nagasawa, S. Nagae, Y. Fukuzawa, S. Chaijit, K.Y amashita, M. Murayama, I. Katayama
Removal rate and surface roughness in the lapping and polishing of RB-SiC optical components
H.Y. Tam, H.B. Cheng, Y.W. Wang
High speed MQL finish-turning of Inconel 718 with different coated tools
Y. Kamata, T. Obikawa
Development and performance evaluation of an ultra precision ELID grinding machine
T. Saleh, M.S. Rahman, H.S. Lim, M. Rahman
Investigation of the influence of process parameters on hot extrusion of magnesium alloy tubes
S.H. Hsiang, Y.W. Lin
Feasibility study of twin roll casting process for magnesium alloys
H. Watari, T. Haga, N. Koga, K. Davey
Experimental investigation of ultrasonic vibration-assisted tapping
K.-L. Kuo
Contents
Two-stage sintering of nano-sized yttria stabilized zirconia process by powder injection moulding
P.C. Yu, Q.F. Li, J.Y.H. Fuh, T. Li, L. Lu
Weaving technology and mechanical properties of extended-PTFE fabrics
C.-W. Lou, C.-W. Lin, C.-H. Lei, H.-C. Chen, Y.-M. Li, J.-H. Lin
Optimal process of warp-knitting fabric with multiple functions
C.W. Lou, C.H. Lei, C.W. Chang, J.M. Chen, C.-H. Hsu, C.B. Huang, J.H. Lin
Sub-micron surface patterning by laser irradiation through microlens arrays
C.S. Lim, M.H. Hong, Y. Lin, G.X. Chen, A. Senthil Kumar, M. Rahman, L.S. Tan, J.Y.H. Fuh, G.C. Lim
Micro-mould fabrication for a micro-gear via vacuum casting
Y. Tang, W.K. Tan, J.Y.H. Fuh, H.T. Loh, Y.S. Wong, S.C.H. Thian, L. Lu
Hybrid laser micro/nanofabrication of phase change materials with combination of chemical processing
Y. Lin, M.H. Hong, G.X. Chen, C.S. Lim, L.S. Tan, Z.B. Wang, L.P. Shi, T.C. Chong
Electrodeposition of Ni—-Fe micro-pillars using laser drilled templates
H.L. Seet, X.P. Li, M.H. Hong, K.S. Lee, K.H. Teh, H.H. Teo
Cold drawing of micro Ni,,Fe,,/Cu composite wires
H.L. Seet, X.P. Li, K.S. Lee, L.Q. Liu
Back pressure equal channel angular consolidation—Application in producing aluminium matrix composites with fine flyash particles
X. Wu, K. Xia
Effect of deformation condition on structure development in nickel base alloy
P. Wangyao, L. Kraus, J. Zrnik, S.N emecek
Relationship of microstructure and mechanical properties of TRIP-aided steel processed by press forging
J. Zrnik, O. Stejskal, Z. Novy, P. Hornak
An analysis of forming limit in the elliptic hole-flanging process of sheet metal
r.-C. Chen
rhermo-elasto-plastic finite element analysis of quenching process of carbon steel
S.H. Kang, Y.T. Im
Image segmentation and analysis for porosity measurement
4.A. Malcolm, H.Y. Leong, A.C. Spowage, A.P. Shacklock
Influence of initial texture on formability of aluminum sheet metal by crystal plasticity FE simulation
Y.P. Chen, W.B. Lee, S. To
A study of forming pressure in the tube-hydroforming process
F.-K. Chen, S.-J. Wang, R.-H. Lin
The characteristics of polyamide layered-silicate nanocomposites
S. Yu, J. Zhao, G. Chen, Y.K. Juay, M.S. Yong
Manufacturing process and property analysis of industrial flame retarded PET fiber and polyurethane composite
I.-J. Tsai, C.-H. Lei, C.-H. Lee, Y.-C. Lee, C.-W. Lou, J.-H. Lin
Performance Study of compact wood powder material processing for improved impact characteristics aiming at substitute for plastics
lr. Miki, K. Takeuchi, H. Sugimoto, K. Kanayama
PET/PP blend with bamboo charcoal to produce functional composites
C.-W. Lou, C.-W. Lin, C.-H. Lei, K.-H. Su, C.-H. Hsu, Z.-H. Liu, J.-H. Lin
High temperature deformation in Ti-SAI-2.5Sn alloy
M.J. Tan, G.W. Chen, S. Thiruvarudchelvan
High porosity and large pore size shape memory alloys fabricated by using pore-forming agent (NH,HCO.,) and capsule-free hot isostatic
pressing
Y.P. Zhang, B. Yuan, M.Q. Zeng, C.Y. Chung, X.P. Zhang
Corrosion resistance of sintered duplex stainless steels in the salt fog spray test
L.A. Dobrzariski, Z. Brytan, M.A. Grande, M. Rosso
Deformation behavior and strain homogeneity in equal channel angular extrusion/pressing
4.V. Nagasekhar, Y. Tick-Hon, H.P. Seow
Diffusion bonding of Ti/graphite and Ti/diamond by hot isostatic pressing method
J. Tanabe, T. Sasaki, S. Kishi
Effects of wire-EDM machining variables on surface roughness of newly developed DC 53 die steel: Design of experiments and
regression modei
K. Kanlayasiri, S.B oonmung
An alternate approach io free-form surface fabrication
K.-L. Yiu, H.-Y. Tam
Electrode form design of large holes of die material in ultrasonic electrochemical finishing
P.S. Pa
Comparison on linear synchronous motors and conventional rotary moters driven Wire-EDM processes
\.W.-J. Hsue, M.-T. Yan, S.-H. Ke
Developing the polymer abrasive gels in AFM processs
\.C. Wang, S.H. Weng
Intelligent identification of turning process based on pattern recognition of cutting states
S. Tangjitsitcharoen, T. Moriwaki
Developing a realistic FE analysis method for the welding of a NET single bead-on-plate test specimen
X.Y. Shan, M.J. Tan, N.P. O'Dowd
Modelling of CCT diagrams for engineering and constructional steels
J. Trzaska, L.A. Dobrzariski
Solidification modeling in continuous casting by finite point method
L. Zhang, Y.-M. Rong, H.-F. Shen, T.-Y. Huang
The simulation of the multi-pass and die-less spinning process
C.-H. Liu
Temperature history for cutting of ceramics preheated by a CO, laset
C.Y. Ho, M.Y. Wen, J.E. Ho, D.Y. Chen
Influence of reprocessing on the mechanical properties and structure of polyamide 6
K.-H. Su, J.-H. Lin, C.-C. Lin
Processing treatment of a lead-free Sn—Ag—Cu-Bi solder by rapid laser-beam reflowing and the creep property of its soldered connection
X.P. Zhang, C.B. Yu, Y.P. Zhang, S. Shrestha, L. Dorn
rhe investigation of fiber carding performance with the application of static electricity t o carded nonwoven fabric process
W.-H. Hsing, J.-H. Lin, K.-T. Kao
Comparison of electromagnetic shielding effectiveness properties of diverse conductive textiles via various measurement techniques
H.C. Chen, K.C. Lee, J.H. Lin, M. Koch
Maximum m superplasticity deformation for Ti-6AI-4V titanium alloy
G. Wang, M.W. Fu
Hydrothermal synthesis and characterization of mesoporous SnO,/SnO,—-SiO on neutral template
J. Zhu, B.Y. Tay, J. Ma
Structure and properties of magnesium cast alloys
L.A. Dobrzariski, T. Tariski, L.C iZek, Z. Brytan
Bulk nanostructured processing of aluminum alloy
Y.W. Tham, M.W. Fu, H.H. Hng, M.S. Yong, K.B. Lim
Applications of the artificial intelligence methods for modeling of the ACAISi7Cu alloy crystallization process
L.A. Dobrzariski, R. Maniara, J.S okolowski, W. Kasprzak, M. Krupinski, Z. Brytan
A study on the thermodynamics of in situ MgAl,O,/Al MMC formation using amorphous silica sources
V.M. Sreekumar, R.M. Pillai, B.C. Pai, M. Chakraborty
Computer simulation of hard magnetic composite materials Nd—Fe—B properties
L.A. Dobrzariski, M. Drak, J. Trzaska
Numerical analysis for bifurcation fracture of sheet metal forming
Y.-M. Huang, S. Kuriyama
Study of the temperature and stress in nanoscale ductile mode cutting of silicon using molecular dynamics simulation
M.B. Cai, X.P. Li, M. Rahman
Author Index
Subject Index