Journal of Materials Processing Technology 2007: Vol 191 Index

2007·2.3 MB·English

Materials
Technology
Journal of Materials Processing Technology 191 (2007) 408-409
www.elsevier.com locate/jmatprotec
Author Index of Volume 191
Abu-Farha, F.K., 77, 189 Fang, G., 331 Kang, S.B., 251
Actis Grande, M., 161 Fang, N., 331 Karpuschewski, B., 335
Agrawal, A., 51 Felicelli, $.D., 265 Kasprzak, W., 317
Ambrogio, G., 92, 390 Ferrer, I., 174 Khan, A.A., 404
Ancona, A., 364, 381 Filice, L., 92, 390 Khraisheh, M.K., 77, 189
Ascari, A., 111 Fortunato, A., 111 Kihara, A., 293
Aspinwall, D.K., 123, 210 Fratini, L., 356 Kim, B.H., 153
Fukaura, K., 297 Kim, B.J., 145
Bae, C.M., 64 Furushima, T., 59 Kim, B.M., 55, 64, 372
Bae, J.W., 165, 251 Kim, E.J., 396
Bana, V., 335 Garcia-Romeu, M.L., 174 Kim, H.S., 193
Banyay, G.A., 102 Gau, J.-T., 7 Kim, J., 368
Bariani, P.F., 119 Geiger, M., 20 Kim, K.J., 2
Basile, G., 215, 364 Gilles, P., 270 Kim, S.1., 306
Berardi, V., 364 Goodarzi, M., 136 Kim, S.S., 396
Bergheau, J.M., 270 Gordon, W.A., 11 Kim, S.W., 55
Berry, J.T., 170 Grigoriev, E.G., 182 Kim, T.W., 165
Bonserio, C., 220 Groche, P., 314 Kim, W.Y., 372
Brytan, Z., 161 Gunasekera, J.S., | Kiyak, M., 141
Buffa, G., 356
Kleiner, M., 288
Byon, S.M., 193, 306 Haga, S., 297 Klimpel, A., 321
Haga, T., 238
Ko, Dr.C., 55, 64
Cakur, O., 141 Hamdi, H., 270
Kopac, J., 400
Campa, F.J., 279 Han, M.-S., 224
Kraft, F.F., 30, 82
Campana, G., 111 Haque, M.M., 360, 404
Krajnik, P., 400
Campanelli, $.L., 220 Harada, Y., 297
Kuboki, T., 136
Casalino, G., 106, 149 Hashambhoy, A., 68
Kumai, S., 238
Cavalluzzi, P., 220 Hashmi, M.S.J., 96, 132
Kumar, S., 206
Chan, L.C., 157 Heaney, D.F., 385
Kundrak, J., 335
Cheng, M.-C , 326 Hernandez, J.C., 34
Kwon, H.-C., 114
Chin, A.B., 235 Hirogaki, T., 293
Choi, J.P., 153 Hirota, K., 283
Choi, S.-W., 178 Ho, S.K., 123 Labisz, K., 321
Choi, T.H., 396 Hodgson, P.D., 114 Lai, C.P., 157
Chon, S.H., 39 Hood, R., 210 Lamikiz, A., 279
Choudhury, S.K., 206 Hoogstrate, A.M., 335 Lee, D.-L., 178
Chow, C.L., 157 Hossan, M.R., 274 Lee, H.-C., 178
Cinquepalmi, M., 220 Hu, H., 247 . H.-W., 114
Ciurana, J., 174 Hunter, R., 34 . J.-H., 39
Cozza, V., 92 HuBnitter, W., 20 . J.H., 55
Hwangb, W.H., 64 . S., 396
Darras, B.M., 77 Hyie, K.M., 48 . S.J., 224
Dixit, P.M., 51 . S.K., 55, 64
Dobrzariski, L.A., 161, Im, Y.-T., 39, 114, 178 . Y., 193, 306
Domblesky, J., 82 Inui, H., 238 . Y.S., 55
Donati, L., 127, 288 Li, N., 247
Drak, M., 352 Jackson, M.J., 185, 232 Lindgren, M., 44
Dr. Kreiner, J., 339 Jeelani, S., 347 Liu, Q., 73
Dr. Lancey, T., 339 Jeon, B.H., 153 Liu, S., 260
Drygata, A., 228 Jonda, E., 321 Lopez de Lacalle, L.N., 279
Lucchetta, G., 119
Ekreem, N.B., 96 Kang, B.S., 368 Ludovico, A.D., 220
Escobar de Obaldia, E., Kang, C.G., 165, 251, 372 Lugara, P.M., 364, 381
Elsevier B.V.
doi: 10.1016/S0924-0 13 6(07)00554-7
Materials
Technology
Journal of Materials Processing Technology 191 (2007) 408-409
www.elsevier.com locate/jmatprotec
Author Index of Volume 191
Abu-Farha, F.K., 77, 189 Fang, G., 331 Kang, S.B., 251
Actis Grande, M., 161 Fang, N., 331 Karpuschewski, B., 335
Agrawal, A., 51 Felicelli, $.D., 265 Kasprzak, W., 317
Ambrogio, G., 92, 390 Ferrer, I., 174 Khan, A.A., 404
Ancona, A., 364, 381 Filice, L., 92, 390 Khraisheh, M.K., 77, 189
Ascari, A., 111 Fortunato, A., 111 Kihara, A., 293
Aspinwall, D.K., 123, 210 Fratini, L., 356 Kim, B.H., 153
Fukaura, K., 297 Kim, B.J., 145
Bae, C.M., 64 Furushima, T., 59 Kim, B.M., 55, 64, 372
Bae, J.W., 165, 251 Kim, E.J., 396
Bana, V., 335 Garcia-Romeu, M.L., 174 Kim, H.S., 193
Banyay, G.A., 102 Gau, J.-T., 7 Kim, J., 368
Bariani, P.F., 119 Geiger, M., 20 Kim, K.J., 2
Basile, G., 215, 364 Gilles, P., 270 Kim, S.1., 306
Berardi, V., 364 Goodarzi, M., 136 Kim, S.S., 396
Bergheau, J.M., 270 Gordon, W.A., 11 Kim, S.W., 55
Berry, J.T., 170 Grigoriev, E.G., 182 Kim, T.W., 165
Bonserio, C., 220 Groche, P., 314 Kim, W.Y., 372
Brytan, Z., 161 Gunasekera, J.S., | Kiyak, M., 141
Buffa, G., 356
Kleiner, M., 288
Byon, S.M., 193, 306 Haga, S., 297 Klimpel, A., 321
Haga, T., 238
Ko, Dr.C., 55, 64
Cakur, O., 141 Hamdi, H., 270
Kopac, J., 400
Campa, F.J., 279 Han, M.-S., 224
Kraft, F.F., 30, 82
Campana, G., 111 Haque, M.M., 360, 404
Krajnik, P., 400
Campanelli, $.L., 220 Harada, Y., 297
Kuboki, T., 136
Casalino, G., 106, 149 Hashambhoy, A., 68
Kumai, S., 238
Cavalluzzi, P., 220 Hashmi, M.S.J., 96, 132
Kumar, S., 206
Chan, L.C., 157 Heaney, D.F., 385
Kundrak, J., 335
Cheng, M.-C , 326 Hernandez, J.C., 34
Kwon, H.-C., 114
Chin, A.B., 235 Hirogaki, T., 293
Choi, J.P., 153 Hirota, K., 283
Choi, S.-W., 178 Ho, S.K., 123 Labisz, K., 321
Choi, T.H., 396 Hodgson, P.D., 114 Lai, C.P., 157
Chon, S.H., 39 Hood, R., 210 Lamikiz, A., 279
Choudhury, S.K., 206 Hoogstrate, A.M., 335 Lee, D.-L., 178
Chow, C.L., 157 Hossan, M.R., 274 Lee, H.-C., 178
Cinquepalmi, M., 220 Hu, H., 247 . H.-W., 114
Ciurana, J., 174 Hunter, R., 34 . J.-H., 39
Cozza, V., 92 HuBnitter, W., 20 . J.H., 55
Hwangb, W.H., 64 . S., 396
Darras, B.M., 77 Hyie, K.M., 48 . S.J., 224
Dixit, P.M., 51 . S.K., 55, 64
Dobrzariski, L.A., 161, Im, Y.-T., 39, 114, 178 . Y., 193, 306
Domblesky, J., 82 Inui, H., 238 . Y.S., 55
Donati, L., 127, 288 Li, N., 247
Drak, M., 352 Jackson, M.J., 185, 232 Lindgren, M., 44
Dr. Kreiner, J., 339 Jeelani, S., 347 Liu, Q., 73
Dr. Lancey, T., 339 Jeon, B.H., 153 Liu, S., 260
Drygata, A., 228 Jonda, E., 321 Lopez de Lacalle, L.N., 279
Lucchetta, G., 119
Ekreem, N.B., 96 Kang, B.S., 368 Ludovico, A.D., 220
Escobar de Obaldia, E., Kang, C.G., 165, 251, 372 Lugara, P.M., 364, 381
Elsevier B.V.
doi: 10.1016/S0924-0 13 6(07)00554-7
Author Index of Volume 191
Manabe, K., 24, 59 Principe, C., 7 Tiernan, P., 310
Maniara, R., 317 Tiwari, H., 102
Marquez, J., 34 Qian, L., 274 Tomesani, L., 111, 127, 288
Marumo, Y., 16 Tricarico, L., 215, 342, 381
Mehta, B.V., 1, 102 Rafferty, A., 96
Merah, N., 198 Rangari, V.K., 347 Ueno, K., 24
Merklein, M., 20 Ratchev, S., 260
Micari, F., 92, 390 Rech, J., 270 Valiorgue, F., 270
Min, B.-K., 224 Reddy, N.V., 51 Vamadevan, G., 30
Minak, G., 127 Rhee, K.Y., 396 Van Tyne, CJ., 11
Moon, Y.H., 11, 145 Rosliakov, A.V., 182 Voice, W., 123, 210
Morris, E., 132 Rosso, M., 161
Murata, M., 136 Wallace, J.F., 242
Saigal, A., 256 Wang, S., 247
Nakagawa, H., 293 Saiki, H., 16 Wang, W.H., 326
Nakamura, K., 24 Salvador, M., 119 Wannasin, J., 242
Naughton, M.D., 310 Sanchez, J.A., 279 Watari, H., 238
Nazzal, M.A., 189 Saroosh, M.A., 178 Williams, A.R., 170
Nishitake, H., 16 Schikorra, M., 288 Won, T., 302
Nitzsche, G., 314 Schingaro, E., 364 Wyatt, J.E., 170
Schwam, D., 242
O'Toole, B., 73 Shaltout, M.M., 102 Yaacob, I.1., 48, 235
Ogawa, K., 293 Shivpuri, R., 356 Yang, D.Y., 2
Olabi, A.G., 96, 132 Sibillano, T., 215, 364 Yoon, C.Y., 396
Olofinjana, A.O., 377 Sokotowski, J., 317 Yoon, S., 302
Omar, M.A., 77 Son, I.-H., 39 Yotsumoto, T., 16
Song, W.J., 368 Yu, A., 247
Palumbo, G., 342 Sorgente, D., 342, 381 Yu, M., 7
Panella, F.W., 149 Spina, R., 215, 385
Park, H.J., 396 Sung, C.-K., 326 Zhang, C., 256
Park, J.K., 39 Takeda, H., 24 Zhang, S.H., 342
Park, K.S., 145 Tan, K.S., 377 Zheng, W.T., 342
Perez, J., 34 Tan, M.J., 87, 202 Zhitomirsky, I., 68
Pervin, F., 347 Tani, G., 111 Zhou, Y., 347
Phuah, K., 260Portillo, P., 339 Teramae, T., 24 Zhu, X.J., 202
Prescott, T., 96 Thiruvarudchelvan, S., 87, 202 Zi¢bowicz, B., 352
Materials
Technology
Journal of Materials Processing Technology 191 (2007) 410-417
www.elsevier.com/ locate/jmatprotec
Subject Index of Volume 191
AA 6082 Artificial neural network
Characterization of seam weld quality in AA6082 extruded profiles, Prediction of wear and surface roughness in electro-discharge
127 diamond grinding, 206
AA6060 Austenite grain size
The role of friction in the extrusion of AA6060 aluminum alloy, Numerical investigation of austenite grain size distribution in square-
process analysis and monitoring, 288 diamond pass hot bar rolling, 114
Ablation Austenitic stainless steel
Experimental analysis of the laser milling process parameters, 220 A new approach for the modelling of residual stresses induced by
Accuracy turning of 316L, 270
An analytical model for improving precision in single point Average width of cut
incremental forming, 92 Performance of different abrasive materials during abrasive water jet
Shape and dimensional accuracy in Single Point Incremental machining of glass, 404
Forming: State of the art and future trends, 390 AWJM
Adaptable die Performance of different abrasive materials during abrasive water jet
A model for an adaptable axisymmetric extrusion die with a bearing machining of glass, 404
length, 11
Adhesive bonding Ball groove
Torsional fatigue behavior of adhesively joined tubes, 339 Development of a ball groove measuring system for forged outer race
Adhesive wear constant velocity (CV) joints, 145
Influence of temperature on the initiation of adhesive wear with Bearing length
respect to deep drawing of aluminum-alloys, 314 A model for an adaptable axisymmetric extrusion die with a bearing
Air bending length, 11
Springback determination of sheet metals in an air bending process Behavior pattern
based on an experimental work, 174 Behavior pattern and parametric characterization for low density
Al-Mg alloy crushable foams, 73
Statistical analysis of MIG-laser CO, hybrid welding of Al-Mg alloy, Bending
106 : Springback behavior of brass in micro sheet forming, 7
Aluminium alloys Springback determination of sheet metals in an air bending process
Mechanical characterization of CO, laser beam butt welds of based on an experimental work, 174
AAS083, 381 2 Blank holder pressure
Aluminum Determination of optimum process parameters for wrinkle free
Quantitative prediction of microporosity in aluminum alloys, 265 products in deep drawing process, 51
Fabrication of micro-billet by sheet extrusion, 283 Bondability
Influence of temperature on the initiation of adhesive wear with Deformation characteristics of Au wire bonding, 16
respect to deep drawing of aluminum-alloys, 314 Brass
Aluminum alloys Springback behavior of brass in micro sheet forming, 7
Residual stresses in aluminum castings, 170 Burring
Thermo-mechanical modeling of laser welding of AASO83 sheets, Effect of material properties on deformation behavior in incremental
215 tube-burring process using a bar tool, 24
Effect of cooling rate on the solidification behavior of AC AlSi,Cu, Bursi pressure
alloy, 317 ; Processing effects in aluminum micro-channel tube for brazed R744
Aluminum foam heat exchangers, 30
Crash behavior of a 3D S-shape space frame structure, 256 Butt-joint
Amorphous phase Mechanical characterization of CO, laser beam butt welds of
Thermal de-vitrification and formation of single phase nano- AASO083, 381 ;
crystalline structure in Fe-based metallic glass alloys, 377
Analytical modeling Carbon/epoxy composite
Theoretical and experimental investigations of finish machining with Influence of montmorillonite clay on the thermal and mechanical
a rounded edge tool, 331 properties of conventional carbon fiber reinforced composites,
ANSYS 347
Lateral crushing of circular and non-circular tube systems under Casting
quasi-static conditions, 132 Residual stresses in aluminum castings, 170
Elsevier B.V.
doi: 10.1016/S0924-0 13 6(07)00555-9
Subject Index of Volume 191 411
Cavitation Crushable foam
Cavitation phenomenon of commercially pure titanium, 202 Behavior pattern and parametric characterization for low density
CBN tool crushable foams, 73
Effect on cutting force in turning hardened tool steels with cubic Cryomilling
boron nitride inserts, 274 A study of hydrostatic extrusion as a consolidation process for
Chatter fabricating ultrafine-grained bulk Al—Mg alloy, 396
Selection of cutting conditions for a stable milling of flexible parts Current
with bull-nose end mills, 279 Examination of machining parameters on surface roughness in EDM
Chemical-assisted ultrasonic machining of tool steel, 141
Chemical-assisted ultrasonic machining of glass, 153 CV Joint
Chitosan Development of a ball groove measuring system for forged outer race
Chitosan-mediated electrosynthesis of organic-inorganic nano- constant velocity (CV) joints, 145
composites, 68
Circular tube Deep drawing
Lateral crushing of circular and non-circular tube systems under Determination of optimum process parameters for wrinkle free
quasi-static conditions, 132 products in deep drawing process, 51
Clamping Influence of temperature on the initiation of adhesive wear with
FEA-based methodology for the prediction of part-fixture behaviour respect to deep drawing of aluminum-alloys, 314
and its applications, 260 Deformation behavior
Closed die Experimental and numerical study on deformation behavior in dieless
Deformation behavior of wrought aluminum alloys in incremental drawing process of superplastic microtubes, 59
compression experiment with a closed die, 372 Deformation pattern
Cold forging Deformation characteristics of Au wire bonding, 16
Development of a ball groove measuring system for forged outer race Deformation stability
constant velocity (CV) joints, 145 The effect of strain rate sensitivity evolution on deformation stability
High cycle fatigue life prediction of cold forging tools based on work- during superplastic forming, 189
piece material property, 178 Design
Cold roll forming Requirements of a dieless wire drawing system, 310
Experimental investigations of the roll load and roll torque when high Design guideline
strength steel is roll formed, 44 Design guideline of multi-pass equal channel angular extrusion for
Collar drawing uniform strain distribution, 39
Investigations into collar drawing using urethane pads, 87 Design of experiment
Composite materials The influence of arc transfer mode in hybrid laser-mig welding,
New possibilities of composite materials application—Materials of 111
specific magnetic propertie De-vitrification
Compression test Thermal de-vitrification and formation of single phase nano-
Deformation behavior of wrought aluminum alloys in incremental crystalline structure in Fe-based metallic glass alloys, 377
compression experiment with a closed die, 372 Die casting
Computer aided design Evaluation of methods for metal cleanliness assessment in die casting,
Electrode structure for high transmittance and aperture ratio in TFT- 242
LCD, 302 Dieless drawing
Conductive particle Experimental and numerical study on deformation behavior in dieless
Improvement of surface integrity of electro-chemical discharge drawing process of superplastic microtubes, 59
machining process using powder-mixed electrolyte, 224 Requirements of a dieless wire drawing system, 310
Consolidation Diode laser
A study of hydrostatic extrusion as a consolidation process for Characterization of yielding of sheet metal at elevated temperatures,
fabricating ultrafine-grained bulk Al-Mg alloy, 396 20
Constitutive equations Direct imprint
Numerical analysis of debinding and sintering of MIM parts, 385 The effects of thin-film thickness on the formaton of metallic patterns
Constitutive model by direct nanoimprint, 326
Behavior pattern and parametric characterization for low density Discharge energy
crushable foams, 73 Improvement of surface integrity of electro-chemical discharge
Continuous dynamic recrystallization machining process using powder-mixed electrolyte, 224
CDRX modelling in friction stir welding of AA7075-T6 aluminum DOE
alloy: Analytical approaches, 356 An analytical model for improving precision in single point
CPVC incremental forming, 92
Natural weathering effects on some properties of CPVC pipe material, 198 Prediction of wear and surface roughness in electro-discharge
Crack growth simulation diamond grinding, 206
Investigation of the size effect on crack propagation using finite Drawing experiment
element method and strain gradient plasticity, 193 A study on monobloc tube drawing for steering input shaft, 55
Crack propagation test Drill temperature
Characterization of seam weld quality in AA6082 extruded profiles, Improvement of micro-drilled hole quality for printed wiring boards,
127 293
Crash behavior Drill workload
Crash behavior of a 3D S-shape space frame structure, 256 Improvement of micro-drilled hole quality for printed wiring boards,
Creep feed grinding 293
Creep feed grinding of a gamma titanium aluminide intermetallic Duplex
alloy using SiC abrasives, 210 Corrosion behavior of vacuum sintered duplex stainless steels, 161
412 Subject Index of Volume 191
ECAE process Finish machining
Design guideline of multi-pass equal channel angular extrusion for Theoretical and experimental investigations of finish machining with
uniform strain distribution, 39 a rounded edge tool, 331
EDM Finite difference method
Examination of machining parameters on surface roughness in EDM Mathematical model for the twin roll type strip continuous casting of
of tool steel, 141 magnesium alloy considering thermal flow phenomena, 251
Electrical discharge machining Finite element
Use of powder metallurgy (PM) compacted electrodes for electrical Numerical and experimental investigations on the effect of the heating
discharge surface alloying/modification of Ti-6AI-4V alloy, 123 strategy and the punch speed on the warm deep drawing of mag-
Electro-discharge diamond grinding nesium alloy AZ31, 342
Prediction of wear and surface roughness in electro-discharge dia- Finite element analysis (FEA)
mond grinding, 206 The effect of strain rate sensitivity evolution on deformation stability
Electromagnetic stirring during superplastic forming, 189
Experimental investigation for rheology forming process of Al-7% Si Thermo-mechanical modeling of laser welding of AASO83 sheets,
aluminum alloy with electromagnetic system, 165 215
Electrophoresis FEA-based methodology for the prediction of part—fixture behaviour
Chitosan-mediated electrosynthesis of organic—inorganic nano- and its applications, 260
composites, 68 Finite element methods
Electrosynthesis Mathematical model for the twin roll type strip continuous casting of
Chitosan-mediated electrosynthesis of organic—inorganic magnesium alloy considering thermal flow phenomena, 251
composites, 68 Electrode structure for high transmittance and aperture ratio in
Elliptical tube TFT-LCD, 302
Lateral crushing of circular and non-circular tube systems Numerical analysis of debinding and sintering of MIM parts, 385
quasi-static conditions, 132 Finite element modeling
Energy absorber Crash behavior of a 3D S-shape space frame structure, 256
Lateral crushing of circular and non-circular tube systems Theoretical and experimental investigations of finish machining with
quasi-static conditions, 132 a rounded edge tool, 331
Eutectic nucleation temperature Finite element simulation
Effect of cooling rate on the solidification behavior of AC AISi,Cu, Experimental and numerical study on deformation behavior in dieless
alloy, 317 drawing process of superplastic microtubes, 59
Extrusion Fixtures
Design of processes and products through simulation of three-dimen- FEA-based methodology for the prediction of part—fixture behaviour
sional extrusion, 2 and its applications, 260
A model for an adaptable axisymmetric extrusion die with a bearing Flexible structures
length, 11 Selection of cutting conditions for a stable milling of flexible parts
Characterization of seam weld quality in AA6082 extruded profiles, with bull-nose end mills, 279
127 Flow stress
The role of friction in the extrusion of AA6060 aluminum alloy, Experimental and analytical evaluation on flow stress of tubular
process analysis and monitoring, 288 material for tube hydroforming simulation, 368
Fluidity
Fatigue Investigation on properties and microstructures of spheroidal graphite
Torsional fatigue behavior of adhesively joined tubes, 339 Fe-—C-2Si and Fe-C-2AI cast irons, 360
FE analysis Forged microstructure
The evaluation of residual stress on the drawn wire using nano- Metallographic evaluation of welded forging preforms, 82
indentation test, 64 Fracture toughness
FE simulation Natural weathering effects on some properties of CPVC pipe material,
Effect of material properties on deformation behavior in incremental 198
tube-burring process using a bar tool, 24 Free bulge test
FEA Experimental and analytical evaluation on flow stress of tubular mate-
Polymer and composite foam for hydrogen storage application, 102 rial for tube hydroforming simulation, 368
FE-analysis Friction
A study on monobloc tube drawing for steering input shaft, 55 The role of friction in the extrusion of AA6060 aluminum alloy,
FEM process analysis and monitoring, 288
Effect of initial thickness on shear bending process of circular tubes, Friction stir processing
136 Friction stir processing of commercial AZ31 magnesium alloy, 77
Investigation of the size effect on crack propagation using finite Friction stir welding
element method and strain gradient plasticity, 193 CDRX modelling in friction stir welding of AA7075-T6 aluminum
Thermal distortions in the machining of small bores, 335 alloy: Analytical approaches, 356
CDRX modelling in friction stir welding of AA7075-T6 aluminum Friction welding
alloy: Analytical approaches, 356 Metallographic evaluation of welded forging preforms, 82
Ferromagnetic
Preparation of iron—platinum nanoparticles in water/triton/cyclohexane Glass
microemulsions, 48 Chemical-assisted ultrasonic machining of glass, 153
FE-simulation GMAW
Characterization of yielding of sheet metal at elevated temperatures, 20 The influence of arc transfer mode in hybrid laser-mig welding, 111
FINEMET Grey-Taguchi
New possibilities of composite materials application—Materials of Robust design of flank milling parameters based on grey-Taguchi
specific magnetic properties, 352 method, 400
Subject Index of Volume 191 413
Grid test K-10 montmorillonite clay
The role of friction in the extrusion of AA6060 aluminum alloy, Influence of montmorillonite clay on the thermal and mechanical
process analysis and monitoring, 288 properties of conventional carbon fiber reinforced composites, 347
Grinding wheels Kinematics
Sintering and vitrification heat treatment of cBN grinding wheels, 232 Requirements of a dieless wire drawing system, 310
GUI K-Mold
Development of a ball groove measuring system for forged outer race Evaluation of methods for metal cleanliness assessment in die casting.
constant velocity (CV) joints, 145 242
Knowledge based system
Hard turning Modeling the integration between technological product specifica-
Effect on cutting force in turning hardened tool steels with cubic tions and inspection process, 34
boron nitride inserts, 274 Knowledge model
Modeling the integration between technological product specifica-
Hardened tool steel tions and inspection process, 34
Effect on cutting force in turning hardened tool steels with cubic
boron nitride inserts, 274 Laser
Heating The influence of arc transfer mode in hybrid laser-mig welding, 111
Electro-discharge compaction of WC-Co and W—Ni-Fe—Co composite Laser alloying
materials, 182 Comparison of the surface alloying of the 32CrMoV 12-28 tool steel
High cycle fatigue using TiC and WC powder, 321
High cycle fatigue life prediction of cold forging tools based on work- Laser milling
piece material property, 178 Experimental analysis of the laser milling process parameters, 220
High speed pulsed welding Laser processing
Microstructural analysis of AISI 304 bars welded with high speed Laser processing of multicrystalline silicon for texturization of solar
pulsed discharges, 149 cells, 228
High strength steel Laser remelting
Experimental investigations of the roll load and roll torque when high Comparison of the surface alloying of the 32CrMoV12-28 tool steel
strength steel is roll formed, 44 using TiC and WC powder, 321
Hole-flanging Laser welding
Investigations into collar drawing using urethane pads, 87 Thermo-mechanical modeling of laser welding of AASO83 sheets,
Hot bar rolling 215
Numerical investigation of austenite grain size distribution in square- Optical detection of conduction/keyhole mode transition in laser
diamond pass hot bar rolling, 114 welding, 364
Hot forging Mechanical characterization of CO, laser beam butt welds of
Metallographic evaluation of welded forging preforms, 82 AAS083, 381 :
Hybrid welding Lateral compression
The influence of are transfer mode in hybrid laser-mig welding, Lateral crushing of circular and non-circular tube systems under
111 quasi-static conditions, 132
Hydrofluoric acid Liquid crystal display
Chemical-assisted ultrasonic machining of glass, 153 Electrode structure for high transmittance and aperture ratio in TFT-
Hydrogen storage LCD, 302
Polymer and composite foam for hydrogen storage application, 102 Liquid impact
Hydrostatic extrusion Pulsed liquid impact machining of materials, 185
A study of hydrostatic extrusion as a consolidation process for LVDT sensor
fabricating ultrafine-grained bulk Al—Mg alloy, 396 Development of a ball groove measuring system for forged outer race
Hypereutectic Al-Si constant velocity (CV) joints, 145
Casting of Al-Si hypereutectic aluminum alloy strip using an unequal
diameter twin roll caster, 238 Machinability
Creep feed grinding of a gamma titanium aluminide intermetallic
Incremental forming alloy using SiC abrasives, 210
Effect of material properties on deformation behavior in incremental Machining process modeling
tube-burring process using a bar tool, 24 Effect on cutting force in turning hardened tool steels with cubic
Incremental sheet forming boron nitride inserts, 274
An analytical model for improving precision in single point incre- Maghemite
mental forming, 92 Synthesis and characterization of magnetic iron oxide nanoparticles
Shape and dimensional accuracy in Single Point Incremental via w/o microemulsion and Massart’s procedure, 235
Forming: State of the art and future trends, 390 Magnesium alloys
Inoculation Friction stir processing of commercial AZ31 magnesium alloy, 77
Investigation on properties and microstructures of spheroidal graphite Pressurized solidification of magnesium alloy AM5S0A, 247
Fe—C-—2Si and Fe—C-2AI cast irons, 360 Magnetic field strength
Inspection process An overview of magnetostriction, its use and methods to measure
Modeling the integration between technological product specifications these properties, 96
and inspection process, 34 Magnetic materials
Integrated circuits New possibilities of composite materials application—Materials of
Deformation characteristics of Au wire bonding, 16 specific magnetic propertie
Iron—platinum Magnetic nanoparticles
Preparation of iron—platinum nanoparticles in water/triton/cyclohexane Synthesis and characterization of magnetic iron oxide nanoparticles
microemulsions, 48 via w/o microemulsion and Massart’s procedure, 235
414 Subject Index of Volume 19]
Magnetic sensors and actuators MIG-laser CO, hybrid welding
An overview of magnetostriction, its use and methods to measure Statistical analysis of MIG-laser CO, hybrid welding of Al-Mg alloy,
these properties, 96 106
Magnetostriction Mild steel
An overview of magnetostriction, its use and methods to measure Lateral crushing of circular and non-circular tube systems under
these properties, 96 quasi-static conditions, 132
Manufacturing Milling
Sintering and vitrification heat treatment of cBN grinding wheels, Selection of cutting conditions for a stable milling of flexible parts
232 with bull-nose end mills, 279
Massart’s procedure Robust design of flank milling parameters based on grey-Taguchi
Synthesis and characterization of magnetic iron oxide nanoparticles method, 400
via w/o microemulsion and Massart’s procedure, 235 Modeling
Materials’ characterization Quantitative prediction of microporosity in aluminum alloys,
Characterization of yielding of sheet metal at elevated temperatures, 265
20 A semi-analytical model for predicting the wear contour in rod rolling
Mechanical properties process, 306
Design of processes and products through simulation of three-dimen- Molecular dynamics simulation
sional extrusion, 2 The effects of thin-film thickness on the formaton of metallic patterns
Experimental investigation for rheology forming process of Al-7% Si by direct nanoimprint, 326
aluminum alloy with electromagnetic system, 165 Multicrystalline silicon
Mechanical characterization of CO, laser beam butt welds of Laser processing of multicrystalline silicon for texturization of solar
AAS083, 381 cells, 228
Metal cleanliness
Evaluation of methods for metal cleanliness assessment in die casting, Nano-crystalline
242 Thermal de-vitrification and formation of single phase nano-
Metal cutting crystalline structure in Fe-based metallic glass alloys, 377
A new approach for the modelling of residual stresses induced by Nano-indentation test
turning of 316L, 270 The evaluation of residual stress on the drawn wire using nano-
Metal forming indentation test, 64
Fabrication of micro-billet by sheet extrusion, 283 Nanoparticles
Metal injection molding Preparation of iron—platinum nanoparticles in water/triton/cyclohexane
Numerical analysis of debinding and sintering of MIM parts, 385 microemulsions, 48
Metallic glass Natural weathering
Thermal de-vitrification and formation of single phase nano- Natural weathering effects on some properties of CPVC pipe material,
crystalline structure in Fe-based metallic glass alloys, 377 198
Mg alloy Nd-Fe-B
Mathematical model for the twin roll type strip continuous casting of New possibilities of composite materials application—Materials of
magnesium alloy considering thermal flow phenomena, 251 specific magnetic properties, 352
Mg alloy sheets Net-shape forming
Numerical and experimental investigations on the effect of the heating Shape and dimensional accuracy in Single Point Incremental
strategy and the punch speed on the warm deep drawing of Forming: State of the art and future trends, 390
magnesium alloy AZ31, 342 Nondestructive evaluation
Micro-channel tube Torsional fatigue behavior of adhesively joined tubes, 339
Processing effects in aluminum micro-channel tube for brazed R744 Numerical modelling
heat exchangers, 30 Lateral crushing of circular and non-circular tube systems under
Micro-CT quasi-static conditions, 132
Polymer and composite foam for hydrogen storage application, 102 A new approach for the modelling of residual stresses induced by
Micro-drill turning of 316L, 270
Improvement of micro-drilled hole quality for printed wiring boards, Numerical prediction
293 Numerical investigation of austenite grain size distribution in square-
Micro-drilling diamond pass hot bar rolling, 114
Chemical-assisted ultrasonic machining of glass, 153 Numerical simulations
Microemulsions Development of a test method for the rheological characterization of
Preparation of iron—platinum nanoparticles in water/triton/cyclohexane polymers under the injection molding process conditions, 119
microemulsions, 48
Micro-forming Optimization
Springback behavior of brass in micro sheet forming, 7 Design of processes and products through simulation of three-dimen-
Fabrication of micro-billet by sheet extrusion, 283 sional extrusion, 2
Micromachining Experimental analysis of the laser milling process parameters,
Experimental analysis of the laser milling process parameters, 220 220
Microstructural analysis Robust design of flank milling parameters based on grey-Taguchi
Microstructural analysis of AISI 304 bars welded with high speed method, 400
pulsed discharges, 149 Outer race
Microstructure modification Development of a ball groove measuring system for forged outer race
Friction stir processing of commercial AZ31 magnesium alloy, 77 constant velocity (CV) joints, 145
Microtube Oxide
Experimental and numerical study on deformation behavior in dieless Chitosan-mediated electrosynthesis of organic—inorganic nano-
drawing process of superplastic microtubes, 59 composites, 68
Subject Index of Volume 191 415
Parametric characterization Roll groove
Behavior pattern and parametric characterization for low density A semi-analytical model for predicting the wear contour in rod rolling
crushable foams, 73 process, 306
Pitting corrosion Roll load
Corrosion behavior of vacuum sintered duplex stainless steels, 161 Experimental investigations of the roll load and roll torque when high
Plasma spectroscopy strength steel is roll formed, 44
Optical detection of conduction/keyhole mode transition in laser Roll torque
welding, 364 Experimental investigations of the roll load and roll torque when high
Plastication influence strength steel is roll formed, 44
Development of a test method for the rheological characterization of
polymers under the injection molding process conditions, 119 Seam weld
PoDFA Characterization of seam weld quality in AA6082 extruded profiles, 127
Evaluation of methods for metal cleanliness assessment in die casting, Sheet extrusion
242 Fabrication of micro-billet by sheet extrusion, 283
Polymeric foam Sheet metal
Polymer and composite foam for hydrogen storage application, Springback determination of sheet metals in an air bending process
102 based on an experimental work, 174
Porosity Casting of Al-Si hypereutectic aluminum alloy strip using an unequal
Quantitative prediction of microporosity in aluminum alloys, 265 diameter twin roll caster, 238
Investigation on properties and microstructures of spheroidal graphite Shot peening
Fe-C-2Si and Fe-C-2AI cast irons, 360 Influence of microshot peening on surface layer characteristics of
Powder structural steel, 297
Electro-discharge compaction of WC-—Co and W-Ni-Fe—Co composite Silicon modification level
materials, 182 Effect of cooling rate on the solidification behavior of AC AISiCu,
Powder forming alloy, 317 :
Sintering and vitrification heat treatment of cBN grinding wheels, 232 Sintered stainless steel
Pressure Corrosion behavior of vacuum sintered duplex stainless steels, 161
Electro-discharge compaction of WC-Co and W-Ni-Fe—-Co composite Size effect
materials, 182 Investigation of the size effect on crack propagation using finite
Pressurized solidification of magnesium alloy AMSOA, 247 element method and strain gradient plasticity, 193
Pressure testing Small bores
Processing effects in aluminum micro-channel tube for brazed R744 Thermal distortions in the machining of small bores
heat exchangers, 30 Solar cells
Pulse Laser processing of multicrystalline silicon for texturization of solar
Electro-discharge comnaction of WC-Co and W-Ni-Fe-Co composite cells, 228
materials, 182 Solidification
Pulsed water jet machining Pressurized solidification of magnesium alloy AMSOA, 247
Pulsed liquid impact machining of materials, 185 Quantitative prediction of microporosity in aluminum alloys, 265
Investigation on properties and microstructures of spheroidal graphite
Quasi-static Fe—C-2Si and Fe—C-2AI cast irons, 360
Lateral crushing of circular and non-circular tube systems under Springback
quasi-static conditions, 132 Springback behavior of brass in micro sheet forming, 7
Residual stress relaxation method Springback determination of sheet metals in an air bending process
The evaluation of residual stress on the drawn wire using nano-inden- based on an experimental work, 174
tation test, 64 Squeeze casting
Residual stresses Pressurized solidification of magnesium alloy AMSOA, 247
The evaluation of residual stress on the drawn wire using nano-inden- Stability
tation test, 64 Requirements of a dieless wire drawing system, 310
Residual stresses in aluminum castings, 170 Statistical analysis
A new approach for the modelling of residual stresses induced by Statistical analysis of MIG-laser CO, hybrid welding of Al-Mg alloy,
turning of 316L, 270 106
Influence of microshot peening on surface layer characteristics of Steering input shaft (SIS)
structural steel, 297 A study on monobloc tube drawing for steering input shaft, 55
Rheological behavior 304 steel butt joint
Deformation behavior of wrought aluminum alloys in incremental Microstructural analysis of AISI 304 bars welded with high speed
compression experiment with a closed die, 372 pulsed discharges, 149
Rheology forming Strain gradient plasticity
Experimental investigation for rheology forming process of Al-7% Si Investigation of the size effect on crack propagation using finite
aluminum alloy with electromagnetic system, 165 element method and strain gradient plasticity, 193
Rheometer Strain rate sensitivity
Development of a test method for the rheological characterization of The effect of strain rate sensitivity evolution on deformation stability
polymers under the injection molding process conditions, 119 during superplastic forming, 189
Robust parameter design Stress analysis
Robust design of flank milling parameters based on grey-Taguchi Processing effects in aluminum micro-channel tube for brazed R744
method, 400 heat exchangers, 30
Rod rolling process Strip casting
A semi-analytical model for predicting the wear contour in rod rolling Casting of Al-Si hypereutectic aluminum alloy strip using an unequal
process, 306 diameter twin roll caster, 238
416 Subject Index of Volume 191
Structural steel Titanium
Influence of microshot peening on surface layer characteristics of Effects of tooling temperatures on formability of titanium TWBs at
structural steel, 297 elevated temperatures, 157
Superplastic forming (SPF) Cavitation phenomenon of commercially pure titanium, 202
The effect of strain rate sensitivity evolution on deformation stability Titanium alloys
during superplastic forming, 189 Creep feed grinding of a gamma titanium aluminide intermetallic
Cavitation phenomenon of commercially pure titanium, 202 alloy using SiC abrasives, 210
Superplasticity Titanium carbide
Experimental and numerical study on deformation behavior in dieless Comparison of the surface alloying of the 32CrMoV12-28 tool steel
drawing process of superplastic microtubes, 59 using TiC and WC powder, 321
Surface alloying/modification Tool edge
Use of powder metallurgy (PM) compacted electrodes for electrical Theoretical and experimental investigations of finish machining with
discharge surface alloying/modification of Ti-6AI-4V alloy, a rounded edge tool, 331
123 Tool steel
Surface integrity Examination of machining parameters on surface roughness in EDM
Creep feed grinding of a gamma titanium aluminide intermetallic of tool steel, 141
alloy using SiC abrasives, 210 Tool-life prediction
Surface roughness High cycle fatigue life prediction of cold forging tools based on work-
Examination of machining parameters on surface roughness in EDM piece material property, 178
of tool steel, 141 Tube bending
Improvement of micro-drilled hole quality for printed wiring boards, Effect of initial thickness on shear bending process of circular tubes,
293 136
Surface treatment Tube drawing
Laser processing of multicrystalline silicon for texturization of solar A study on monobloc tube drawing for steering input shaft, 55
cells, 228 Tube forming
Influence of microshot peening on surface layer characteristics of Effect of material properties on deformation behavior in incremental
structural steel, 297 tube-burring process using a bar tool, 24
Effect of initial thickness on shear bending process of circular tubes, 136
Tailor welded preforms Tube hydroforming process
Metallographic evaluation of welded forging preforms, 82 Experimental and analytical evaluation on flow stress of tubular
Tailor-welded blanks material for tube hydroforming simulation, 368
Effects of tooling temperatures on formability of titanium TWBs at Tungsten carbide
elevated temperatures, 157 Comparison of the surface alloying of the 32CrMoV 12-28 tool steel
Taper of cut using TiC and WC powder, 321
Performance of different abrasive materials during abrasive water jet Twin roll caster
machining of glass, 404 Casting of Al-Si hypereutectic aluminum alloy strip using an unequal
Temperature diameter twin roll caster, 238
Influence of temperature on the initiation of adhesive wear with Twin roll continuous casting
respect to deep drawing of aluminum-alloys, 314 Mathematical model for the twin roll type strip continuous casting of
Temperature profiles magnesium alloy considering thermal flow phenomena, 251
Friction stir processing of commercial AZ31 magnesium alloy, 77
Tensile Ultrafine-grain
Natural weathering effects on some properties of CPVC pipe material, A study of hydrostatic extrusion as a consolidation process for
198 fabricating ultrafine-grained bulk Al-Mg alloy, 396
Tensile test Ultrasonic machining
Experimental and analytical evaluation on flow stress of tubular material Chemical-assisted ultrasonic machining of glass, 153
for tube hydroforming simulation, 368 Undercooling
Thermal and mechanical properties Effect of cooling rate on the solidification behavior of AC AlSi,Cu,
Influence of montmorillonite clay on the thermal and mechanical alloy, 317 :
properties of conventional carbon fiber reinforced composites, Uniform strain distribution
347 Design guideline of multi-pass equal channel angular extrusion for
Thermal characteristics uniform strain distribution, 39
Effect of cooling rate on the solidification behavior of AC AISi,Cu, Upper bound
alloy, 317 ; Determination of optimum process parameters for wrinkle free prod-
Thermal distortion ucts in deep drawing process, 51
Thermal distortions in the machining of small bores, 335 Urethane
Thermo-fluid analysis Investigations into collar drawing using urethane pads, 87
Mathematical model for the twin roll type strip continuous casting of
magnesium alloy considering thermal flow phenomena, 251 Vitrification
Thickness Sintering and vitrification heat treatment of cBN grinding wheels, 232
Effect of initial thickness on shear bending process of circular tubes,
136 W/o microemulsion
Thin floors Synthesis and characterization of magnetic iron oxide nanoparticles
Selection of cutting conditions for a stable milling of flexible parts via w/o microemulsion and Massart’s procedure, 235
with bull-nose end mills, 279 Warm deep drawing
Thin-film thickness effect Numerical and experimental investigations on the effect of the heating
The effects of thin-film thickness on the formaton of metallic patterns strategy and the punch speed on the warm deep drawing of
by direct nanoimprint, 326 magnesium alloy AZ31, 342