Table Of Content

Journal of Materials Processing Technology os EVIE Journal of Materials Processing Technology 173 (2006) 401-402 www.elsevier.com/locate/jmatprotec Author Index of Volume 173 Ahsan, M., 345 Freire, P.B., 40 Naidim, O., 178 Akkus, N., 145 Natarajan, S., 247 Al-Sulaiman, F.A., 345 Gao, J.X., 213 Nemade, J.B., 92 Allwood, J.M., 111 Girot, F., 252 Alves Jr., C., 40 Gisario, A., 232 Ozdemir, T., 315 Andersson, P., 394 Guo, Y.B., 21 Pal, T.K., 61 Askari, A., 1 Haddad, Y.M., 240 Pan, Z., 301 Bahloul, R., 101 Hama, T., 178 Pater, Z., 201 Balasubramanian, M., 275 Hanarz, R., 75 Pires, C.T.A., 368 Banu, M., 178 Harte, A.M., 376 Podgornik, B., 291 Bao, G., 330 Hashmi, M.S.J., 44 Potiron, A., 101 Barletta, M., 157, 232 Hasirci, H., 260 Raja Durai, A., 151 Ben-Elechi, S., 101 Hemming, B., 394 Bhanuprasad, V.V., 185 Hughes, J.1., 359 Ridgway, K., 359 Roy, S.S., 337 Bhole, S.D., 92 Rull, F., 34 Iguro, S., 330 Birol, Y., 84 Inkyo, M., 330 Béjar, M.A., 352 Sales, R.M., 368 Btaz, L., 75 Jo, H.H., 223 Seker, U., 260 Bochniak, W., 75 Jung, C.S., 223 Senthil Kumar, A., 151 Boettcher, A.A., 34 Sharman, A.R.C., 359 Bohua, D., 310 Kawahara, M., 145 Shelton, P.W., 269 Bonner, A.A., 269 Khamba, J.S., 125 Shibo, G., 310 Boudi, A.A., 44 Kim, B.M., 223 Shinozaki, K., 330 Korbel, A., 75 Silva, M.A., 368 Cao, W., 209 Kosec, L., 29] Singh, R., 125 Chakkingal, U., 53 Kosec, M., 291 Snarski, P., 75 Chakraborti, N., 384 Krishnamurthy, R., 185 Sornakumar, T., 151 Chandradass, J., 275 Stalony-Dobrzariski, F., 75 Kumar, V.S.S., 247 Chang, S.-I., 166 Stylios, G.K., 172 Chatterjee, S., 61 Lee, S.K., 223 Sun, D., 172 Chen, C.H., 321 Lee, Y.-M., 166 SuStarsié, B., 291 Ciurana, J., 213 Levén, J., 394 Suwas, S., 29 Collins, L., 92 Li, C.-L., 136 Szyndler, R., 75 Costa, T.H.C., 40 Liu, C., 92 Counsell, T.A.M., 111 Livatyali, H., 14 Tagliaferri, V., 232 Coupard, D., 252 Lu, Y.-H., 136 Takamura, M., 178 Cus, F., 281 Luo, S.Y., 321 Teodosiu, C., 178 Ting, Z., 310 Das, S., | Mahara, Y., 330 Tiwari, S., 384 de Bezerra, C.M., 40 Makinouchi, A., 178 Todd, B.A., 21 DolinSek, S., 291 Malkogoglu, A., 315 Tsai, Y.Y., 321 Martinez, H.V., 252 Toth, L.S., 29 Eberhardt, A., 29 Mathieu, J.-P., 29 Ergeldi, M.M., 14 Mc Namara, J.F., 376 VaradaRajan, Y.S., 185 Miyamoto, Y., 209 Venugopal, P., 53 Feitor, M.C., 40 Moll, P., 29 Vijayaraghavan, L., 185 Feng, D.Z., 194 Moreno, E., 352 Viswanathan, D., 247 Ferreira, H.C., 368 Ferrer, I., 213 Nagasekhar, A.V., 53 Wang, J., 301 Elsevier B.V. doi: 10.1016/S0924-0136(06)00117-8 402 Author Index of Volume 173 Watanabe, H., 330 Xu, Q.Y., 70 Yilbas, B.S., 44, 345 Wen, Q., 21 Xuanhui, Q., 310 Wild, M., 394 Zhang, H., 301 Wu, M.-T., 136 Yamamoto, M., 330 Zhang, X.P., 70 Yamashiro, M., 194 Zhu, Z., 301 Xinbo, H., 310 Yang, S.-H., 166 Zumelzu, E., 34 Xiong, S.M., 70 Yeh, F.-H., 136 Zuperl, U., 281 Journal of ‘ Materials ee Processing Seles Technology LSEVIE Journal of Materials Processing Technology 173 (2006) 403-408 www.elsevier.com/locate/jmatprotec Subject Index of Volumes 173 AA6082 Bond strength The effect of processing and Mn content on the T5 and T6 properties Weld procedural effect on the performance of iron based hardfacing of AA6082 profiles, 84 deposits on cast’iron substrate, 61 Abrasive wear Bonding strength Abrasive wear resistance of boronized carbon and low-alloy steels, ESEM evaluation of Inconel-625 thermal spray coating (HVOF) 352 onto stainless steel and carbon steel post brine exposure after Acoustic emission tensile tests, 44 Performance enhancement through microwave irradiation of Boriding K20 carbide tool machining Al/SiC metal matrix composite, Abrasive wear resistance of boronized carbon and low-alloy steels, 185 352 Activity model Boronizing Activity model and computer aided system for defining sheet metal Abrasive wear resistance of boronized carbon and low-alloy steels, 352 process planning, 213 Boss thickness Adaptive mesh An experimental and analytical study on dome forming of seamless An adaptive FEA method to predict surface quality in hard Al tube by spinning process, 145 machining, 21 Adhesion Carbon and oxygen control Characterization and micro- and ultra-structural analysis of Powder injection molding of Ti-6AI-4V alloy, 310 PET-based Co-rolled composite electrolytic chromium coated Carbon/carbon fibers steel (ECCS), 34 CO, laser cutting of a carbon/carbon multi-lamelled plain-weave structure, 345 Al,O, Sol-gel processing of alumina fibres, 275 Cast iron Alumina Weld procedural effect on the performance of iron based hardfacing A new technology in surface finishing: Fluidized bed machining deposits on cast iron substrate, 61 (FBM) of aluminium alloys, 157 Ceramic cutting tools| 2117-T4 aluminum alloy The effect of tool wear on tool life of alumina-based ceramic cutting Constitutive model of the alloy 2117-T4 at low strain rates and tools while machining hardened martensitic stainless steel, 151 temperatures, 252 Chatter Aluminum droplet Chatter analysis of robotic machining process, 301 Freeform fabrication of aluminum parts by direct deposition of Chip molten aluminum, 209 Assessment of chip-breaking characteristics using new chip-breaking Analytical model index, 166 An experimental and analytical study on dome forming of seamless Chip breaker Al tube by spinning process, 145 Assessment of chip-breaking characteristics using new chip-breaking ANFIS index, 166 Application of ANFIS for inverse prediction of hole profile in the Chip former square hole bore-expanding process, 136 Assessment of chip-breaking characteristics using new chip-breaking Austempered ductile iron (ADI) index, 166 Evaluation of machinability of austempered ductile irons in terms Chip-breaking cycle time of cutting forces and surface quality, 260 Assessment of chip-breaking characteristics using new chip-breaking The effect of copper additions to the mechanical properties of index, 166 austempered ductile iron (ADI), 269 Chip-breaking index Automotive applications Assessment of chip-breaking characteristics using new chip-breaking The effect of processing and Mn content on the TS and T6 properties index, 166 of AA6082 profiles, 84 Coating ESEM evaluation of Inconel-625 thermal spray coating (HVOF) Bevel gears onto stainless steel and carbon steel post brine exposure after New forging method of bevel gears from structural steel, 75 tensile tests, 44 BK7 glass Cold compaction Studies on cut-off grinding of BK7 optical glass using thin diamond The influence of MoS, additions on the densification of wheels, 321 water-atomized HSS powders, 291 Elsevier B.V. doi:10.1016/S0924-0136(06)001 18-X 404 Subject Index of Volume 173 Cold-rolling Die design Transfer of surface texture from silicon nitride rolls to stainless A new design for equal channel angular extrusion, 29 steel wire in cold-rolling, 394 Diode laser Component-wise splitting method Advance in paint stripping from aluminium substrates, 232 Numerical methods to improve the computational efficiency of Dome forming solidification simulation for the investment casting process, 70 An experimental and analytical study on dome forming of seamless Composite Al tube by spinning process, 145 Characterization and micro- and ultra-structural analysis of Drawing processes PET-based Co-rolled composite electrolytic chromium coated Activity model and computer aided system for defining sheet metal steel (ECCS), 34 process planning, 213 Composite self-lubricating high-speed steels Ductile metals The influence of MoS, additions on the densification of A new technology in surface finishing: Fluidized bed machining water-atomized HSS powders, 291 (FBM) of aluminium alloys, 157 Computer aided process planning Activity model and computer aided system for defining sheet metal ECAE process planning, 213 A new design for equal channel angular extrusion, 29 Copper additions ECAP The effect of copper additions to the mechanical properties of A new design for equal channel angular extrusion, 29 austempered ductile iron (ADI), 269 End closure of tube Corrosion An experimental and analytical study on dome forming of seamless ESEM evaluation of Inconel-625 thermal spray coating (HVOF) Al tube by spinning process, 145 onto stainless steel and carbon steel post brine exposure after Equal channel angular extrusion tensile tests, 44 A new design for equal channel angular extrusion, 29 Cr/C ratio Equal channel angular pressing Weld procedural effect on the performance of iron based hardfacing Candidature of equal channel angular pressing for processing of deposits on cast iron substrate, 61 tubular commercial purity-titanium, 53 Cracking sensitivity Experimental design Weld procedural effect on the performance of iron based hardfacing Optimisation of springback predicted by experimental and numerical deposits on cast iron substrate, 61 approach by using response surface methodology, 101 Cross wedge rolling Finite element analysis of cross wedge rolling, 201 Fabrics Cut-off grinding Fabric surface properties affected by low temperature plasma Studies on cut-off grinding of BK7 optical glass using thin diamond treatment, 172 wheels, 321 FATT Cutting Effect of nickel and molybdenum additions on weld metal toughness CO, laser cutting of a carbon/carbon multi-lamelled plain-weave in a submerged arc welded HSLA line-pipe steel, 92 structure, 345 FE analysis Cutting forces A non-steady state FE analysis of Al tubes hot extrusion by a Performance enhancement through microwave irradiation of K20 porthole die, 223 carbide tool machining Al/SiC metal matrix composite, 185 Fe,B phase Evaluation of machinability of austempered ductile irons in terms Abrasive wear resistance of boronized carbon and low-alloy steels, of cutting forces and surface quality, 260 352 Chatter analysis of robotic machining process, 301 FEA Cutting parameter optimization An adaptive FEA method to predict surface quality in hard Approach to optimization of cutting conditions by using artificial machining, 21 neural networks, 28] FEM Cylinder upsetting Design of over-crown in sheet metal stamping using finite element Constitutive model of the alloy 2117-T4 at low strain rates and method, 14 temperatures, 252 Finite element analysis of cross wedge rolling, 201 FEM simulation Damage Optimisation of springback predicted by experimental and numerical Optimisation of springback predicted by experimental and numerical approach by using response surface methodology, 101 approach by using response surface methodology, 101 Fibres On the stochastic deformation process in a randomly structured Sol-gel processing of alumina fibres, 275 polycrystalline solid, 240 Finite element analysis Decision support system Theoretical prediction and FEM analysis of superplastic forming of Activity model and computer aided system for defining sheet metal AA7475 aluminum alloy in a hemispherical die, 247 process planning, 213 Fluidized bed machining (FBM) Deformation A new technology in surface finishing: Fluidized bed machining On the stochastic deformation process in a randomly structured (FBM) of aluminium alloys, 157 polycrystalline solid, 240 Forming pressure Delamination Theoretical prediction and FEM analysis of superplastic forming of The effect of copper additions to the mechanical properties of AA7475 aluminum alloy in a hemispherical die, 247 austempered ductile iron (ADI), 269 Fuzzy expert system Densification Design of genetic-fuzzy expert system for predicting surface finish Performance enhancement through microwave irradiation of K20 in ultra-precision diamond turning of metal matrix composite, carbide tool machining Al/SiC metal matrix composite, 185 337 Subject Index of Volume 173 405 Genetic algorithms Machinability Design of genetic-fuzzy expert system for predicting surface finish Evaluation of machinability of austempered ductile irons in terms in ultra-precision diamond turning of metal matrix composite, of cutting forces and surface quality, 260 337 Machining Multi-objective optimization of a two-dimensional cutting problem Approach to optimization of cutting conditions by using artificial using genetic algorithms, 384 neural networks, 281 Glass beads Machining properties A new technology in surface finishing: Fluidized bed machining The machining properties of some hardwoods and softwoods (FBM) of aluminium alloys, 157 naturally grown in Eastern Black Sea Region of Turkey, 315 Guillotine cutting Martensitic stainless steel Multi-objective optimization of a two-dimensional cutting problem The effect of tool wear on tool life of alumina-based ceramic cutting using genetic algorithms, 384 tools while machining hardened martensitic stainless steel, 151 Mass loss Hansel—Spittel constitutive model A new technology in surface finishing: Fluidized bed machining Constitutive model of the alloy 2117-T4 at low strain rates and (FBM) of aluminium alloys, 157 temperatures, 252 Mechanical properties Hardfacing deposits Powder injection molding of Ti-6AIl-4V alloy, 310 Weld procedural effect on the performance of iron based hardfacing Metal deposits on cast iron substrate, 61 Characterization and micro- and ultra-structural analysis of High-temperature properties PET-based Co-rolled composite electrolytic chromium coated Use of micromechanical modelling in the material characterisation steel (ECCS), 34 of overinjected thermoplastic composites, 376 Metal cutting Hot extrusion An adaptive FEA method to predict surface quality in hard A non-steady state FE analysis of Al tubes hot extrusion by a machining, 21 porthole die, 223 Approach to optimization of cutting conditions by using artificial HSLA neural networks, 281 Effect of nickel and molybdenum additions on weld metal toughness Multi-objective optimization of a two-dimensional cutting problem in a submerged arc welded HSLA line-pipe steel, 92 using genetic algorithms, 384 HVOF Metal matrix composite ESEM evaluation of Inconel-625 thermal spray coating (HVOF) Design of genetic-fuzzy expert system for predicting surface finish onto stainless steel and carbon steel post brine exposure after in ultra-precision diamond turning of metal matrix composite, tensile tests, 44 337 Hydrogen embrittlement Micromechanics Practical numerical analysis of a crack near a weld subjected to On the stochastic deformation process in a randomly structured primary loading and hydrogen embrittlement, 1 polycrystalline solid, 240 Use of micromechanical modelling in the material characterisation Impact toughness of overinjected thermoplastic composites, 376 Effect of nickel and molybdenum additions on weld metal toughness Microscopy in a submerged arc welded HSLA line-pipe steel, 92 Characterization and micro- and ultra-structural analysis of Inconel 182 PET-based Co-rolled composite electrolytic chromium coated Stress corrosion cracking sealing in overlaying of Inconel 182 by steel (ECCS), 34 laser surface melting, 330 Microstructure and mechanical properties Inverse prediction The influence of MoS, additions on the densification of Application of ANFIS for inverse prediction of hole profile in the water-atomized HSS powders, 291 square hole bore-expanding process, 136 Microwave radiation Investment casting Performance enhancement through microwave irradiation of K20 Numerical methods to improve the computational efficiency of carbide tool machining Al/SiC metal matrix composite, 185 solidification simulation for the investment casting process, 70 Mode coupling Chatter analysis of robotic machining process, 301 Kerf width size Modelling CO, laser cutting of a carbon/carbon multi-lamelled plain-weave On the stochastic deformation process in a randomly structured structure, 345 polycrystalline solid, 240 Kinematic hardening Molybdenum disulphide Simulation of springback and wrinkling in stamping of a dual The influence of MoS, additions on the densification of phase steel rail-shaped part, 178 water-atomized HSS powders, 291 KOBO forging Mortising New forging method of bevel gears from structural steel, 75 The machining properties of some hardwoods and softwoods naturally grown in Eastern Black Sea Region of Turkey, 315 Large deformation MRR An experimental and analytical study on dome forming of seamless Ultrasonic machining of titanium and its alloys: A review, 125 Al tube by spinning process, 145 Multi-objective optimization Laser surface melting Multi-objective optimization of a two-dimensional cutting problem Stress corrosion cracking sealing in overlaying of Inconel 182 by using genetic algorithms, 384 laser surface melting, 330 Multiple regression analysis Line pipe steel The effect of tool wear on tool life of alumina-based ceramic cutting Effect of nickel and molybdenum additions on weld metal toughness tools while machining hardened martensitic stainless steel, in a submerged arc welded HSLA line-pipe steel, 92 151 406 Subject Index of Volume 173 Nelder and Mead simplex method An experimental and analytical study on dome forming of seamless Set-up optimization for tandem cold mills: A case study, 368 Al tube by spinning process, 145 Net droplet-based manufacturing Process maps Freeform fabrication of aluminum parts by direct deposition of Advance in paint stripping from aluminium substrates, 232 molten aluminum, 209 Process planning Neural network algorithm A pragmatic approach for optimal selection of plant-specific Approach to optimization of cutting conditions by using artificial process plans in a virtual enterprise, 194 neural networks, 281 Process stability Nickel based superalloys Finite element analysis of cross wedge rolling, 201 An analysis of the residual stresses generated in Inconel 718™ Processing when turning, 359 The effect of processing and Mn content on the TS and T6 properties Non-steady state of AA6082 profiles, 84 A non-steady state FE analysis of Al tubes hot extrusion by a porthole die, 223 Reactive supersolidus liquid-phase sintering Numerical simulation The influence of MoS, additions on the densification of Numerical methods to improve the computational efficiency of water-atomized HSS powders, 291 solidification simulation for the investment casting process, 70 Recycling Desktop paper recycling: A survey of novel technologies that Objective measurement might recycle office paper within the office, 111 Fabric surface properties affected by low temperature plasma Removal depth treatment, 172 Advance in paint stripping from aluminium substrates, 232 Office paper Residual stress Desktop paper recycling: A survey of novel technologies that Practical numerical analysis of a crack near a weld subjected to might recycle office paper within the office, 111 primary loading and hydrogen embrittlement, | Optimization An analysis of the residual stresses generated in Inconel 718'™ Optimisation of springback predicted by experimental and numerical when turning, 359 approach by using response surface methodology, 101 Response surface technique A pragmatic approach for optimal selection of plant-specific Optimisation of springback predicted by experimental and numerical process plans in a virtual enterprise, 194 approach by using response surface methodology, 101 Over-crown prediction Robotic machining Design of over-crown in sheet metal stamping using finite element Chatter analysis of robotic machining process, 301 method, 14 Sanding Paint stripping The machining properties of some hardwoods and softwoods Advance in paint stripping from aluminium substrates, 232 naturally grown in Eastern Black Sea Region of Turkey, 315 Partner selection Scanning electron micrograph A pragmatic approach for optimal selection of plant-specific Performance enhancement through microwave irradiation of process plans in a virtual enterprise, 194 K20 carbide tool machining Al/SiC metal matrix composite, PIM 185 Powder injection molding of Ti-6AI-4V alloy, 310 SCC sealing Planing Stress corrosion cracking sealing in overlaying of Inconel 182 by The machining properties of some hardwoods and softwoods laser surface melting, 330 naturally grown in Eastern Black Sea Region of Turkey, 315 SEM testing Plasma treatment Fabric surface properties affected by low temperature plasma Effects of gas composition during plasma modification of polyester treatment, 172 fabrics, 40 Set-up optimization Fabric surface properties affected by low temperature plasma Set-up optimization for tandem cold mills: A case study, 368 treatment, 172 Severe plastic deformation Polycrystalline solid Candidature of equal channel angular pressing for processing of On the stochastic deformation process in a randomly structured tubular commercial purity-titanium, 53 polycrystalline solid, 240 Shaping Polyester fabrics The machining properties of some hardwoods and softwoods Effects of gas composition during plasma modification of polyester naturally grown in Eastern Black Sea Region of Turkey, 315 fabrics, 40 Sheet metal processes Polymer Activity model and computer aided system for defining sheet metal Characterization and micro- and ultra-structural analysis of process planning, 213 PET-based Co-rolled composite electrolytic chromium coated Sheet metal stamping steel (ECCS), 34 Design of over-crown in sheet metal stamping using finite element i !| Porosity defect method, 14 Numerical methods to improve the computational efficiency of Sheet metals solidification simulation for the investment casting process, 70 Optimisation of springback predicted by experimental and numerical Porthole die approach by using response surface methodology, 101 A non-steady state FE analysis of Al tubes hot extrusion by a Silicon nitride porthole die, 223 Transfer of surface texture from silicon nitride rolls to stainless Pressure vessels steel wire in cold-rolling, 394 Practical numerical analysis of a crack near a weld subjected to Sintering primary loading and hydrogen embrittlement, 1 Sol—gel processing of alumina fibres, 275 Subject Index of Volume 173 407 Slurry temperature An analysis of the residual stresses generated in Inconel 718™ Ultrasonic machining of titanium and its alloys: A review, 125 when turning, 359 Sol—gel process Surface preparation Sol-gel processing of alumina fibres, 275 ESEM evaluation of Inconel-625 thermal spray coating (HVOF) Solid freeform fabrication onto stainless steel and carbon steel post brine exposure after Freeform fabrication of aluminum parts by direct deposition of tensile tests, 44 molten aluminum, 209 Surface roughness Specific cutting energy A new technology in surface finishing: Fluidized bed machining Assessment of chip-breaking characteristics using new chip-breaking (FBM) of aluminium alloys, 157 index, 166 Fabric surface properties affected by low temperature plasma Spectroscopy treatment, 172 Characterization and micro- and ultra-structural analysis of Evaluation of machinability of austempered ductile irons in terms PET-based Co-rolled composite electrolytic chromium coated of cutting forces and surface quality, 260 steel (ECCS), 34 Transfer of surface texture from silicon nitride rolls to stainless Spinning steel wire in cold-rolling, 394 An experimental and analytical study on dome forming of seamless Surface transfer Al tube by spinning process, 145 Transfer of surface texture from silicon nitride rolls to stainless Springback steel wire in cold-rolling, 394 Design of over-crown in sheet metal stamping using finite element method, 14 Tandem cold rolling Optimisation of springback predicted by experimental and numerical Set-up optimization for tandem cold mills: A case study, 368 approach by using response surface methodology, 101 Temperature filed Springback and wrinkling prediction Numerical methods to improve the computational efficiency of Simulation of springback and wrinkling in stamping of a dual solidification simulation for the investment casting process, 70 phase steel rail-shaped part, 178 Texture Square hole bore-expanding process Transfer of surface texture from silicon nitride rolls to stainless Application of ANFIS for inverse prediction of hole profile in the steel wire in cold-rolling, 394 square hole bore-expanding process, 136 Thermomechanical Stamping Use of micromechanical modelling in the material characterisation Simulation of springback and wrinkling in stamping of a dual of overinjected thermoplastic composites, 376 phase steel rail-shaped part, 178 Thin diamond wheel Static explicit finite element simulation Studies on cut-off grinding of BK7 optical glass using thin diamond Simulation of springback and wrinkling in stamping of a dual wheels, 321 phase steel rail-shaped part, 178 Ti-6AlI4V Stochastic Powder injection molding of Ti-6AI-4V alloy, 310 On the stochastic deformation process in a randomly structured Time-evolution polycrystalline solid, 240 On the stochastic deformation process in a randomly structured Strain state polycrystalline solid, 240 Finite element analysis of cross wedge rolling, 201 Titanium Strain-rate Ultrasonic machining of titanium and its alloys: A review, 125 Theoretical prediction and FEM analysis of superplastic forming of Toner AA7475 aluminum alloy in a hemispherical die, 247 Desktop paper recycling: A survey of novel technologies that Stress corrosion cracking might recycle office paper within the office, 111 Stress corrosion cracking sealing in overlaying of Inconel 182 by Tool life laser surface melting, 330 The effect of tool wear on tool life of alumina-based ceramic cut- Structural steel ting tools while machining hardened martensitic stainless steel, New forging method of bevel gears from structural steel, 75 151 Structure model Tool wear Chatter analysis of robotic machining process, 301 The effect of tool wear on tool life of alumina-based ceramic Structures cutting tools while machining hardened martensitic stainless Characterization and micro- and ultra-structural analysis of steel, 151 PET-based Co-rolled composite electrolytic chromium coated Turning steel (ECCS), 34 The machining properties of some hardwoods and softwoods Submerged arc weld naturally grown in Eastern Black Sea Region of Turkey, 315 Effect of nickel and molybdenum additions on weld metal An analysis of the residual stresses generated in Inconel 718™ toughness in a submerged arc welded HSLA line-pipe steel, 92 when turning, 359 Superplastic forming Theoretical prediction and FEM analysis of superplastic forming of Ultra-precision diamond turning AA7475 aluminum alloy in a hemispherical die, 247 Design of genetic-fuzzy expert system for predicting surface finish Surface finish in ultra-precision diamond turning of metal matrix composite, Ultrasonic machining of titanium and its alloys: A review, 125 337 Design of genetic-fuzzy expert system for predicting surface finish Ultrasonic machining in ultra-precision diamond turning of metal matrix composite, Ultrasonic machining of titanium and its alloys: A review, 125 337 Surface integrity Virtual organization An adaptive FEA method to predict surface quality in hard A pragmatic approach for optimal selection of plant-specific machining, 21 process plans in a virtual enterprise, 194 408 Subject Index of Volume 173 Viscoplasticity Wettability Constitutive model of the alloy 2117-T4 at low strain rates and Effects of gas composition during plasma modification of polyester temperatures, 252 fabrics, 40 Wiping die bending Wear Optimisation of springback predicted by experimental and numerical Studies on cut-off grinding of BK7 optical glass using thin diamond approach by using response surface methodology, 101 wheels, 321 Wire rolling Transfer of surface texture from silicon nitride rolls to stainless Transfer of surface texture from silicon nitride rolls to stainless steel wire in cold-rolling, 394 steel wire in cold-rolling, 394 Wear resistance Wood Abrasive wear resistance of boronized carbon and low-alloy steels, 352 The machining properties of some hardwoods and softwoods Welding naturally grown in Eastern Black Sea Region of Turkey, Practical numerical analysis of a crack near a weld subjected to 315 primary loading and hydrogen embrittlement, | Welding pressure XPS analysis A non-steady state FE analysis of Al tubes hot extrusion by a Fabric surface properties affected by low temperature plasma porthole die, 223 treatment, 172 Welding repairing X-ray analysis Stress corrosion cracking sealing in overlaying of Inconel 182 by Performance enhancement through microwave irradiation of K20 laser surface melting, 330 carbide tool machining Al/SiC metal matrix composite, 185