Table Of Content

Journal of Materials Processing Technology Journal of Materials Processing Technology 172 (2006) 472-473 www.elsevier.com/locate/jmatprotec Author Index of Volume 172 Abdewi, E.F., 394 Girard, A.C., 346 Lo Casto, S., 16 Ahmed, M., 299 Girard, S., 152 Lo Valvo, E., 16 Al-Qutub, A.M., 327 Gongalves, C.V., 42 Lopez de Lacalle, L.N., 11 Al-Zaharnah, I.T., 305 Grandhi, R.V., 249 Lu, Y., 445 Allam, I.M., 327 Grenier, Y.J., 346 Luo, M.-l., 431 Anal, A., 70 Guechichi, H., 381 Andrade, S.R., 104 Guimaraes, G., 42 Mac Donald, B.J., 346 Angulo, C., 11 Gupta, A.K., 225 Macchion, O., 356 Antonio, C.A.C., 35 Machado, I.F., 169 Haddadi, H., 96 Maciel, R., 104 Ballester, M., 146 Haga, T., 271 Magnusson, M., 264 Bandyopadhyay, T.K., 70 Hambardzumyan, A.F., 243 Mahdi, E., 394 Bayraktar, E., 208 Hamouda, A.M.S., 394 Mamalis, A.G., 243, 277 Bergstr6m, J., 77 Haseeb, A.S.M.A., 388 Manolakos, D.E., 243, 277 Boran, K., 123 Hassan, A., 341 Masud, A.K.M., 258 Bouvier, S., 96 Haworth, B., 341 McPherson, N.A., 238 Bouwman, J.W., 356 Mitra, A., 182 Brissaud, D., 291 Ikawa, M., 271 Moon, Y.H., 88 Bruce, G.J., 238 Mosse, L., 163 Burman, C., 77 Jacobsson, M., 264 Moura, L.F.M., 104 Jardini, A.L.M., 104 Murugan, N., | Cantwell, W.J., 163 Jarl, M., 332 Capello, E., 319 Jin, C.J., 30 Naher, S., 388 Cardew-Hall, M., 163 Junkar, M., 291 Nakatani, N., 30 Castex, L., 381 Norasethasopon, S., 400 Castro, C.F., 35 Kais Bin Zaman, A.K.M., 258 Celentano, D., 451, 461 Kalyanasundaram, S., 163 Chakraborty, D., 283 Kamruzzaman, M., 299 Oliva, O., 461 Chandra, S., 218 Kaplan, D., 208 Ouyang, J., 110 Cheng, T.-H., 407 Karatas, C., 22 Cheng-song, C., 195 Keles, O., 22 Pal, S.K., 182, 283 Choi, S.K., 88 Kikuta, T., 30 Palani, P.K., 1 Chun, M.S., 88 Kim, B.M., 311 Panda, A.K., 182 Compston, P., 163 Kim, D.H., 311 Panda, S.S., 283 Kim, K.H., 311 Pedersen, W., 417 Das, K., 70 Kovacevic, R., 110 Petrosyan, G.L., 243, 277 Desrayaud, C., 152 Kumai, S., 271 Petrosyan, H.G., 277 Dhar, N.R., 299 Kumar, S., 64 Platts, M.J., 159 Driver, J.H., 152 Ponthot, J.-P., 451, 461 Du, C.-C., 407 Lamikiz, A., 11 Prakash, S., 52 Du, F., 202 Lee, H.C., 311 Pu, C.-s., 431 Duszczyk, J., 372 Levée, P., 96 Levers, A., 159 Eyercioglu, O., 363 Li, H., 424 Qing-chun, L., 195 Li, J., 437 Qu, S., 188 Flores, F., 451, 461 ti h., 372 Qureshi, T.W., 327 Fratini, L., 16 Li, T.H., 424 Freire, C.M.A., 146 Li, X., 202 Ramulu, M., 417 Li, Z., 249 Ravi Kumar, D., 225 Garcia, C., 451, 461 Lightfoot, M.P., 238 Regone, N.N., 146 Gillstrém, P., 332 Lin, Q.L., 424 Ren, C.Q., 424 Gindy, N.N.Z., 363 Liu, C., 445 Ringeval, S., 152 Elsevier B.V. doi: 10. 1016/S0924-0 136(06)00069-0 Author Index of Volume 172 Sanchez, J.A., 11 Thiruvarudchelvan, S., 174 Wijayathunga, V.N., 139 Scarparo, M.A.F., 104 Tseng, C.-H., 407 Woods, K., 238 Scotti, A., 42 Wari, H., 271 Sekhon, G.S., 64 Uslan, I., 22 Shan-ben, C., 195 Usta, Y., 22 Yamazaki, T., 30 Shibuya, T., 30 Uyyuru, R.K., 312 Yao, Y., 437, 445 Sidhu, B.S., 52 Yarrapareddy, E., 110 Singh, A.K., 283 Valberg, H., 312 Yilbas, B.S., 123 Singh, R., 64 Valentinéié, J., 291 Yilmaz, O., 363 Sousa, L.C., 35 Van Tyne, C.J., 88 Ying-dong, Q., 195 Srinivasan, R., 249 Varis, J., 130 Yoshida, K., 400 Ssemakula, H., 264 Vazquez, M., 182 Yuan, Z., 437, 445 Stahlberg, U., 264 Verma, R.K., 218 Sulaiman, S., 394 Vilarinho, L.O., 42 Sun, X.Y., 424 Zahrai, S., 356 Sunar, M., 123 Wang, M., 202 Zhang, M., 188 Wang, T., 159 Zhao, H., 437 Tan, M.J., 174 Wang, X., 188 Zhao, J.-q., 431 Tang, W., 431 Wang, Y., 77 Zhou, J., 372 Teodosiu, C., 96 Webb, D.C., 139 Zou, Z., 188 Journal of Materials Processing Technology Journal of Materials Processing Technology 172 (2006) 474-479 www.elsevier.com/locate/jmatprotec Subject Index of Volume 172 AA 3103 alloy Backward cup extrusion A novel high straining process for bulk materials—The development Physical and numerical analysis of the metal flow over the punch head of a multipass forging system by compression along three axes, in backward cup extrusion of aluminium, 312 152 Base current Acrylate rubber Selection of parameters of pulsed current gas metal arc welding, 1 Impact properties of acrylate rubber-modified PVC: Influence of Base duration temperature, 341 Selection of parameters of pulsed current gas metal arc welding, 1 Adhesive Beam waist Study in IC chip failure during pick-up process by using experimental Laser cutting of steel sheets: Influence of workpiece thickness and and finite element methods, 407 beam waist position on kerf size and stria formation, 22 ALO, particles Bending/unbending Effect of sub-micron AIL,O, concentration on dry wear properties of An improved model for predicting limiting drawing ratio, 218 6061 aluminum based composite, 327 Bimetallic tube Al-alloys Mathematical modelling of plastic deformation processes of bimetallic Physical and numerical analysis of the metal flow over the punch head tubes with porous-internal layer in conical dies, 243 in backward cup extrusion of aluminium, 312 Bimetallics Al-—Cu alloy Determination of initial compression stresses when extruding bimetal- Al-based anodic oxide films structure observation using field emission lic tubes with porous internal layer, 277 gun scanning electron microscopy, 146 Blank holder force Al-Si alloy An improved model for predicting limiting drawing ratio, 218 Al-based anodic oxide films structure observation using field emission Bonding gun scanning electron microscopy, 146 Lining of hydraulic cylinder made of cast iron with copper alloy, 30 Alumina Buckling Effect of sub-micron Al,O, concentration on dry wear properties of Artificial neural networks as an aid to steel plate distortion reduction, 6061 aluminum based composite, 327 238 Aluminium Bulge forming Experimental and numerical investigation of the effect of spray Numerical simulation of axisymmetric tube bulging using a urethane cutting fluids in high speed milling, 11 rod, 346 Aluminothermic reduction Synthesis and characterization of TiB,-reinforced iron-based composites, 70 Carbon preform Aluminum Preparation of carbon materials by modeling of impregnating coal-tar Al-based anodic oxide films structure observation using field emission pitch into carbon preform, 424 gun scanning electron microscopy, 146 Carbon steels Amorphous wire Mechanical descaling of wire rod using reverse bending and brushing, The effect of magnetoelastic interaction on the GMI behaviour of 332 Fe-, Co- and Co—Fe-based amorphous wires, 182 Chip thickness Anisotropy Drill wear monitoring using back propagation neural network, 283 Simple shear tests: Experimental techniques and characterization of Clinching the plastic anisotropy of rolled sheets at large strains, 96 Economics of clinched joint compared to riveted joint and example of Anodizing applying calculations to a volume product, 130 Al-based anodic oxide films structure observation using field emission CO, laser gun scanning electron microscopy, 146 Improvement of the spatial resolution of prototypes using infrared Aramid short fiber laser stereolithography on thermosensitive resins, 104 Modeling of energy absorption of short fiber composite considering Coal-tar pitch interfacial properties of fiber/matrix, 258 Preparation of carbon materials by modeling of impregnating coal-tar Artificial neural networks as an aid to steel plate distortion reduction, pitch into carbon preform, 424 238 Coatings Drill wear monitoring using back propagation neural network, 283 Studies on the behaviour of stellite-6 as plasma sprayed and laser Axial compression crushing remelted coatings in molten salt environment at 900 °C under Effect of geometry on the crushing behaviour of laminated corrugated cyclic conditions, 52 composite tubes, 394 Composition of steel Axial flow Parametric approach model for determining welding conditions: New Heat transfer from typical loads within gas quenching furnace, 356 type of Welding Limit Diagrams—II (WLD), 208 Elsevier B.V. doi:10.1016/S0924-0136(06)00070-7 Subject Index of Volume 172 475 Computer simulation Distortion Determination of a constitutive relationship for AZ31B magnesium Artificial neural networks as an aid to steel plate distortion reduction, alloy and validation through comparison between simulated and 238 real extrusion, 372 Distortion minimization during gas quenching process, 249 Copper alloy Distortion minimization Lining of hydraulic cylinder made of cast iron with copper alloy, 30 Distortion minimization during gas quenching process, 249 Copper shaped-wire Drilling Influences of inclusion shape and size in drawing of copper shaped- Drill wear monitoring using back propagation neural network, 283 wire, 400 Corrugated composite tubes Economic Effect of geometry on the crushing behaviour of laminated corrugat- Economics of clinched joint compared to riveted joint and example of ed composite tubes, 394 applying calculations to a volume product, 130 Costs Elecrical discharge machining Economics of clinched joint compared to riveted joint and example of EDM process adaptation system in toolmaking industry, 291 applying calculations to a volume product, 130 Electro discharge machining Counter pressure A user-friendly fuzzy-based system for the selection of electro dis- A note on fluid-pressure-assisted deep drawing processes, 174 charge machining process parameters, 363 Crushing strength Energy absorption A technical note on the production of zirconia and zircon brick from Modeling of energy absorption of short fiber composite considering locally available zircon in Bangladesh, 388 interfacial properties of fiber/matrix, 258 Cutting Energy absorption capability Laser cutting of steel sheets: Influence of workpiece thickness and Effect of geometry on the crushing behaviour of laminated corrugated beam waist position on kerf size and stria formation, 22 composite tubes, 394 Cutting fluids Error prediction Experimental and numerical investigation of the effect of spray cut- Modeling of virtual workpiece with machining errors representation ting fluids in high speed milling, 11 in turning, 437 CuZnNi alloy Estimating Microstructure and wear properties of WC—TiC—Co/CuZnNi compos- Robustness improvement of tool life estimation assisted by a virtual ite surface coating, 188 manufacturing cell, 445 CWR Evolutionary optimisation The coupling thermal—mechanical and microstructural model for the Optimal design of V and U bending processes using genetic algorithms, 35 FEM simulation of cross wedge rolling, 202 Expert rules A user-friendly fuzzy-based system for the selection of electro Decarburization discharge machining process parameters, 363 Lining of hydraulic cylinder made of cast iron with copper alloy, 30 Expert systems Decomposition EDM process adaptation system in toolmaking industry, 291 A technical note on the production of zirconia and zircon brick from Explosive forming locally available zircon in Bangladesh, 388 Experimental evaluation and finite element simulation of explosive Deep drawing forming of a square cup from a brass plate assisted by a lead plug, A note on fluid-pressure-assisted deep drawing processes, 174 139 An improved model for predicting limiting drawing ratio, 218 Extrusion Numerical modelling and experimental validation of steel deep Mathematical modelling of plastic deformation processes of bimetallic drawing processes. Part I. Material characterization, 451 tubes with porous-internal layer in conical dies, 243 Numerical modelling and experimental validation of steel deep Determination of initial compression stresses when extruding bimetallic drawing processes. Part II: Applications, 461 tubes with porous internal layer, 277 Deformation Determination of a constitutive relationship for AZ31B magnesium Determination of a constitutive relationship for AZ31B magnesium alloy and validation through comparison between simulated and alloy and validation through comparison between simulated and real extrusion, 372 real extrusion, 372 Delamination Facing Stamp forming of polypropylene based fibre—metal laminates: The Facing SiCp/Mg metal matrix composites with carbide tools, 417 effect of process variables on formability, 163 Fatigue limit Density Fatigue limits prediction of surface treated materials, 381 A technical note on the production of zirconia and zircon brick from Feed rate locally available zircon in Bangladesh, 388 Optimization of open die forging of round shapes using FEM analy- Deposit dimension sis, 88 On-line measurement of deposit dimension in spray forming using FEM image processing technology, 195 A technical note on an experimental device to measure friction coef- Descaling ficient in sheet metal forming, 16 Mechanical descaling of wire rod using reverse bending and brushing, Optimization of open die forging of round shapes using FEM analy- 332 sis, 88 Detachment parameter Study in IC chip failure during pick-up process by using experimen- Selection of parameters of pulsed current gas metal arc welding, | tal and finite element methods, 407 DFM FE-modeling EDM process adaptation system in toolmaking industry, 291 Physical and numerical analysis of the metal flow over the punch head Die design in backward cup extrusion of aluminium, 312 Optimal design of V and U bending processes using genetic FeO algorithms, 35 Lining of hydraulic cylinder made of cast iron with copper alloy, 30 476 Subject Index of Volume 172 Field emission gun microscopy Heat treatment Al-based anodic oxide films structure observation using field emission Technological advances in steels heat treatment, 169 gun scanning electron microscopy, 146 Heating Finite element analysis (FEA) Thermal and stress analysis of a sheet metal in welding, 123 A process model for shot peen forming, 159 Heterogeneity Finite element method (FEM) Simple shear tests: Experimental techniques and characterization of Thermal and stress analysis of a sheet metal in welding, 123 the plastic anisotropy of rolled sheets at large strains, 96 The coupling thermal—mechanical and microstructural model for the High speed milling FEM simulation of cross wedge rolling, 202 Experimental and numerical investigation of the effect of spray cut- Numerical simulation of axisymmetric tube bulging using a urethane ting fluids in high speed milling, 11 rod, 346 Hot corrosion Influences of inclusion shape and size in drawing of copper shaped- Studies on the behaviour of stellite-6 as plasma sprayed and laser wire, 400 remelted coatings in molten salt environment at 900 °C under Finite element modelling cyclic conditions, 52 Artificial neural networks as an aid to steel plate distortion reduction, 238 Hydraulic cylinder Flake graphite cast iron Lining of hydraulic cylinder made of cast iron with copper alloy, 30 Lining of hydraulic cylinder made of cast iron with copper alloy, 30 Hydraulic pressure Flank wear — A note on fluid-pressure-assisted deep drawing processes, 174 Drill wear monitoring using back propagation neural network, 283 Hydrodynamic effects Forging Heat transfer from typical loads within gas quenching furnace, 356 Improving the grain size in the forging of large copper lids, 264 Hydrophilicity Formability Hydrophilic modification of poly(ether sulfone) used TiO, nanoparticles Formability of galvanized interstitial-free steel sheets, 225 by a sol-gel process, 431 Forming Stamp forming of polypropylene based fibre—metal laminates: The IC chips effect of process variables on formability, 163 Study in IC chip failure during pick-up process by using experimental Forming limit diagrams and finite element methods, 407 Formability of galvanized interstitial-free steel sheets, 225 Identification Forming process Estimation of heat source and thermal efficiency in GTAW process by Numerical modelling and experimental validation of steel deep drawing using inverse techniques, 42 processes. Part I. Material characterization, 451 Image processing Numerical modelling and experimental validation of steel deep drawing On-line measurement of deposit dimension in spray forming using processes. Part II: Applications, 461 image processing technology, 195 Friction stir welding Impact extrusion Microstructural evolution in the friction stir welded 6061 aluminum Physical and numerical analysis of the metal flow over the punch head alloy (T6-temper condition) to copper, 110 in backward cup extrusion of aluminium, 312 Friction test Impact modifiers A technical note on an experimental device to measure friction Impact properties of acrylate rubber-modified PVC: Influence of tem- coefficient in sheet metal forming, 16 perature, 341 Furnace design Impregnation efficiency Heat transfer from typical loads within gas quenching furnace, 356 Preparation of carbon materials by modeling of impregnating coal-tar Fuzzy logic pitch into carbon preform, 424 A user-friendly fuzzy-based system for the selection of electro Impulse loading discharge machining process parameters, 363 Experimental evaluation and finite element simulation of explosive forming of a square cup from a brass plate assisted by a lead plug, Galvanized interstitial-free steel 139 Formability of galvanized interstitial-free steel sheets, 225 Inclusion shape Gas quenching process Influences of inclusion shape and size in drawing of copper shaped- Distortion minimization during gas quenching process, 249 wire, 400 Giant magnetoimpedance Inclusion size The effect of magnetoelastic interaction on the GMI behaviour of Influences of inclusion shape and size in drawing of copper shaped- Fe-, Co- and Co—Fe-based amorphous wires, 182 wire, 400 Grain size Infrared radiation The coupling thermal—mechanical and microstructural model for the Improvement of the spatial resolution of prototypes using infrared FEM simulation of cross wedge rolling, 202 laser stereolithography on thermosensitive resins, 104 Improving the grain size in the forging of large copper lids, 264 Interface friction GTAW process Formability of galvanized interstitial-free steel sheets, 225 Estimation of heat source and thermal efficiency in GTAW process by Intermetallic compounds using inverse techniques, 42 Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper, 110 Hard metal Interrupted cutting Microstructure and wear properties of WC-—TiC—Co/CuZnNi Suppressing vibrations of machining processes in both feed and composite surface coating, 188 radial directions using an optimal control strategy: The case of Hardness interrupted cutting, 305 Synthesis and characterization of TiB,-reinforced iron-based Inverse approach composites, 70 3 Optimal design of V and U bending processes using genetic algorithms, 35 Heat transfer uniformity Iron matrix composite Heat transfer from typical loads within gas quenching furnace, 356 Synthesis and characterization of TiB,-reinforced iron-based composites, 70 Subject Index of Volume 172 477 Iron-based material Mechanical joining Characterization of an iron-based laser sintered material, 77 Economics of clinched joint compared to riveted joint and example of Iron—carbon equilibrium applying calculations to a volume product, 130 Technological advances in steels heat treatment, 169 Metal matrix composites Facing SiCp/Mg metal matrix composites with carbide tools, 417 Joining of dissimilar metals Microstructural evolution Microstructural evolution in the friction stir welded 6061 aluminum The coupling thermal—mechanical and microstructural model for the alloy (T6-temper condition) to copper, 110 FEM simulation of cross wedge rolling, 202 Microstructure Kalman estimator Synthesis and characterization of TiB,-reinforced iron-based composites, Suppressing vibrations of machining processes in both feed and radi- 70 al directions using an optimal control strategy: The case of inter- Characterization of an iron-based laser sintered material, 77 rupted cutting, 305 Microstructure and wear properties of WC—TiC—Co/CuZnNi composite Kinetics model surface coating, 188 Preparation of carbon materials by modeling of impregnating coal-tar Milling tools pitch into carbon preform, 424 Microstructure and wear properties of WC—TiC—Co/CuZnNi composite Knowledge base surface coating, 188 CCKBS: A component check knowledge-based system for assessing Minimum quantity lubricant (MQL) manufacturability of sheet metal parts, 64 Experimental and numerical investigation of the effect of spray cutting Knowledge-based system fluids in high speed milling, 11 CCKBS: A component check knowledge-based system for assessing MMC manufacturability of sheet metal parts, 64 Facing SiCp/Mg metal matrix composites with carbide tools, 417 Modelling Laminates Parametric approach model for determining welding conditions: New Stamp forming of polypropylene based fibre—metal laminates: The type of Welding Limit Diagrams—II (WLD), 208 effect of process variables on formability, 163 Modeling of energy absorption of short fiber composite considering Large copper lids interfacial properties of fiber/matrix, 258 Improving the grain size in the forging of large copper lids, 264 MQL Laser Effect of minimum quantity lubrication (MQL) on tool wear and Laser cutting of steel sheets: Influence of workpiece thickness and surface roughness in turning AISI-4340 steel, 299 beam waist position on kerf size and stria formation, 22 Multipass forging Laser remelting A novel high straining process for bulk materials—The development Studies on the behaviour of stellite-6 as plasma sprayed and laser of a multipass forging system by compression along three axes, remelted coatings in molten salt environment at 900 °C under 152 cyclic conditions, 52 Laser sintering Nanosized metal oxides Characterization of an iron-based laser sintered material, 77 Hydrophilic modification of poly(ether sulfone) used TiO, nanoparticles Limiting drawing ratio by a sol-gel process, 431 An improved model for predicting limiting drawing ratio, 218 NaOH Localized curing A technical note on the production of zirconia and zircon brick from Improvement of the spatial resolution of prototypes using infrared locally available zircon in Bangladesh, 388 laser stereolithography on thermosensitive resins, 104 On-line measurement Machining On-line measurement of deposit dimension in spray forming using Facing SiCp/Mg metal matrix composites with carbide tools, 417 image processing technology, 195 Machining error Open die forging Modeling of virtual workpiece with machining errors representation Optimization of open die forging of round shapes using FEM analysis, in turning, 437 88 Magnesium Optimization Determination of a constitutive relationship for AZ31B magnesium Estimation of heat source and thermal efficiency in GTAW process by alloy and validation through comparison between simulated and using inverse techniques, 42 real extrusion, 372 Simple shear tests: Experimental techniques and characterization Facing SiCp/Mg metal matrix composites with carbide tools, 417 of the plastic anisotropy of rolled sheets at large strains, Magnetic sensor 96 The effect of magnetoelastic interaction on the GMI behaviour of Oxidation behavior Fe-, Co- and Co—Fe-based amorphous wires, 182 Microstructure and wear properties of WC-TiC—Co/CuZnNi composite Magnetoelastic interaction surface coating, 188 The effect of magnetoelastic interaction on the GMI behaviour of Fe-, Co- and Co—Fe-based amorphous wires, 182 Peak current Manufacturability Selection of parameters of pulsed current gas metal arc welding, | CCKBS: A component check knowledge-based system for assessing Peak time manufacturability of sheet metal parts, 64 Selection of parameters of pulsed current gas metal arc welding, | Material characterization Phase change Numerical modelling and experimental validation of steel deep drawing Estimation of heat source and thermal efficiency in GTAW process by processes. Part I. Material characterization, 451 using inverse techniques, 42 Material flow Physical modeling Physical and numerical analysis of the metal flow over the punch head Physical and numerical analysis of the metal flow over the punch head in backward cup extrusion of aluminium, 312 in backward cup extrusion of aluminium, 312 478 Subject Index of Volume 172 Physical pattern technique Self-pierce riveting Physical and numerical analysis of the metal flow over the punch head Economics of clinched joint compared to riveted joint and example of in backward cup extrusion of aluminium, 312 applying calculations to a volume product, 130 Pick-up Semisolid casting Study in IC chip failure during pick-up process by using experimen- 6111 Aluminium alloy strip casting using an unequal diameter twin tal and finite element methods, 407 roll caster, 271 Plasma spray Sensitivity analysis Studies on the behaviour of stellite-6 as plasma sprayed and laser Artificial neural networks as an aid to steel plate distortion reduction, 238 remelted coatings in molten salt environment at 900 °C under Sheet metal cyclic conditions, 52 Thermal and stress analysis of a sheet metal in welding, 123 Plasticity of porous materials Economics of clinched joint compared to riveted joint and example of Determination of initial compression stresses when extruding bimetal- applying calculations to a volume product, 130 lic tubes with porous internal layer, 277 Sheet metal forming Plug cushion A technical note on an experimental device to measure friction Experimental evaluation and finite element simulation of explosive form- coefficient in sheet metal forming, 16 ing of a square cup from a brass plate assisted by a lead plug, 139 Optimal design of V and U bending processes using genetic PMMC’s algorithms, 35 Effect of sub-micron Al,O, concentration on dry wear properties of Formability of galvanized interstitial-free steel sheets, 225 6061 aluminum based composite, 327 Sheet metal parts Poly(ether sulfone)/TiO, composites CCKBS: A component check knowledge-based system for assessing Hydrophilic modification of poly(ether sulfone) used TiO, nanoparti- manufacturability of sheet metal parts, 64 cles by a sol-gel process, 431 Polymer (Shot) peen forming Improvement of the spatial resolution of prototypes using infrared A process model for shot peen forming, 159 laser stereolithography on thermosensitive resins, 104 Poly(vinyl chloride) (PVC) Shot peening Impact properties of acrylate rubber-modified PVC: Influence of tem- A process model for shot peen forming, 159 perature, 341 SiCp/Mg Porous material Facing SiCp/Mg metal matrix composites with carbide tools, 417 Mathematical modelling of plastic deformation processes of bimetallic Simple shear tubes with porous-internal layer in conical dies, 243 Simple shear tests: Experimental techniques and characterization of Powder metallurgy the plastic anisotropy of rolled sheets at large strains, 96 Characterization of an iron-based laser sintered material, 77 Simulation Process model Numerical simulation of axisymmetric tube bulging using a urethane A process model for shot peen forming, 159 rod, 346 Pulse frequency Simulation of industrial problems Selection of parameters of pulsed current gas metal arc welding, 1 Numerical modelling and experimental validation of steel deep draw- Punch design ing processes. Part II: Applications, 461 Optimal design of V and U bending processes using genetic algo- Single-fiber pull-out test rithms, 35 Modeling of energy absorption of short fiber composite considering interfacial properties of fiber/matrix, 258 Quench chamber Sol-gel process Heat transfer from typical loads within gas quenching furnace, 356 Hydrophilic modification of poly(ether sulfone) used TiO, nanoparti- Quenching cles by a sol-gel process, 431 f Technological advances in steels heat treatment, 169 Spray forming On-line measurement of deposit dimension in spray forming using Residual stresses image processing technology, 195 Residual stresses in turning. Part II. Influence of the machined Spring-back material, 319 Optimal design of V and U bending processes using genetic algo- Fatigue limits prediction of surface treated materials, 381 rithms, 35 Reverse bending Square cups Mechanical descaling of wire rod using reverse bending and brushing, Experimental evaluation and finite element simulation of explosive 332 forming of a square cup from a brass plate assisted by a lead plug, 139 Roll caster Stand-off distance 6111 Aluminium alloy strip casting using an unequal diameter twin Experimental evaluation and finite element simulation of explosive roll caster, 271 forming of a square cup from a brass plate assisted by a lead plug, Roll casting — 139 6111 Aluminium alloy strip casting using an unequal diameter twin Steel machining roll caster, 271 Residual stresses in turning. Part II. Influence of the machined mate- Rolled metal sheet rial, 319 Simple shear tests: Experimental techniques and characterization of Steels the plastic anisotropy of rolled sheets at large strains, 96 Technological advances in steels heat treatment, 169 Rotation angle Effect of minimum quantity lubrication (MQL) on tool wear and Optimization of open die forging of round shapes using FEM surface roughness in turning AISI-4340 steel, 299 analysis, 88 Stellite-6 Round bar Studies on the behaviour of stellite-6 as plasma sprayed and laser Optimization of open die forging of round shapes using FEM remelted coatings in molten salt environment at 900 °C under analysis, 88 cyclic conditions, 52 Subject Index of Volume 172 479 Stereolithography U-bending Improvement of the spatial resolution of prototypes using Optimal design of V and U bending processes using genetic infrared laser stereolithography on thermosensitive resins, algorithms, 35 104 Urethane Strain hardening Numerical simulation of axisymmetric tube bulging using a urethane Fatigue limits prediction of surface treated materials, 381 rod, 346 Stress—strain curve User-friendly systems A novel high straining process for bulk materials—The development A user-friendly fuzzy-based system for the selection of electro of a multipass forging system by compression along three axes, discharge machining process parameters, 363 152 Stria V-bending Laser cutting of steel sheets: Influence of workpiece thickness and Optimal design of V and U bending processes using genetic beam waist position on kerf size and stria formation, 22 algorithms, 35 Strip casting Vibration 6111 Aluminium alloy strip casting using an unequal diameter twin Suppressing vibrations of machining processes in both feed and roll caster, 271 radial directions using an optimal control strategy: The case of Success rate interrupted cutting, 305 Study in IC chip failure during pick-up process by using experimen- Virtual manufacturing tal and finite element methods, 407 Modeling of virtual workpiece with machining errors representation Suppression in turning, 437 Suppressing vibrations of machining processes in both feed and radi- Robustness improvement of tool life estimation assisted by a virtual al directions using an optimal control strategy: The case of inter- manufacturing cell, 445 rupted cutting, 305 Virtual workpiece Surface pre-treatments Modeling of virtual workpiece with machining errors representation Mechanical descaling of wire rod using reverse bending and brushing, in turning, 437 332 Voltage Surface treatments Technological advances in steels heat treatment, 169 Fatigue limits prediction of surface treated materials, 381 Wear Temperature Experimental and numerical investigation of the effect of spray A technical note on the production of zirconia and zircon brick from cutting fluids in high speed milling, 11 locally available zircon in Bangladesh, 388 Wear resistance Estimation of heat source and thermal efficiency in GTAW process by Synthesis and characterization of TiB,-reinforced iron-based using inverse techniques, 42 composites, 70 : Thermal stress Microstructure and wear properties of WC—TiC—Co/CuZnNi composite Thermal and stress analysis of a sheet metal in welding, 123 surface coating, 188 Thermoplastic resin Welding Stamp forming of polypropylene based fibre—metal laminates: The Estimation of heat source and thermal efficiency in GTAW process by effect of process variables on formability, 163 using inverse techniques, 42 Thin plate Thermal and stress analysis of a sheet metal in welding, 123 Artificial neural networks as an aid to steel plate distortion reduction, Artificial neural networks as an aid to steel plate distortion reduction, 238 238 Welding Limit Diagrams TiB, Parametric approach model for determining welding conditions: New Synthesis and characterization of TiB,-reinforced iron-based compos- type of Welding Limit Diagrams—II (WLD), 208 ites, 70 : Welding processing Tool life Parametric approach model for determining welding conditions: New Robustness improvement of tool life estimation assisted by a virtual type of Welding Limit Diagrams—II (WLD), 208 manufacturing cell, 445 Wire drawing Tool wear and surface roughness Influences of inclusion shape and size in drawing of copper shaped- Effect of minimum quantity lubrication (MQL) on tool wear and wire, 400 surface roughness in turning AISI-4340 steel, 299 Wire rod Toolmaking Mechanical descaling of wire rod using reverse bending and brushing, 332 EDM process adaptation system in toolmaking industry, 291 Turning Zinc coating Effect of minimum quantity lubrication (MQL) on tool wear and sur- Formability of galvanized interstitial-free steel sheets, 225 face roughness in turning AISI-4340 steel, 299 Zircon Residual stresses in turning. Part II. Influence of the machined A technical note on the production of zirconia and zircon brick from material, 319 locally available zircon in Bangladesh, 388 Turning operation Zirconia Modeling of virtual workpiece with machining errors representation A technical note on the production of zirconia and zircon brick from in turning, 437 locally available zircon in Bangladesh, 388