Journal of Materials Processing Technology 2005: Vol 161 Index

2005·2.5 MB·English

Journalo f
. Materials
ey Processing
a Technology
Journal of Materials Processing Technology 161 (2005) 516-517
www-.elsevier.com/locate/jmatprotec
Author Index of Volume 161
Altzoumailis, A., 16 Guo, L.F., 462 Li, H., 478, 491
Arabatzis, I.M., 107, 224, 276 Guobin, L., 445 i, J.-Y., 396
Argyropoulou, R., 16 i, M.-Z., 449
Han, C.S., 485 i, Y., 430
Baik, Y., 415 Hantila, F., 315 Liang, Y., 491
Balaev, D.A., 42, 58 Hantila, F.I., 305 Liaw, S.-D., 467
Bao, H., 491 Hashizume, H., 348 Lin, H.C., 435
Barglik, J., 269 Hatziargyriou, N., 128 Lin, K.M., 435
Bayramh, E., 83 He, Y.F., 456 Liu, M., 440
Bodurov, P., 504 Higashikawa, K., 22 Liu, N., 478
Bouzid, W., 388 Hoole, S.R.H., 247, 327, 368 Loisos, G., 151
Hoshino, T., 22 Loizos, Z., 224
Cai, Z.-Y., 449 Hristoforou, E., 33, 359 Lukes, I., 107
Chang, P.-C., 467 Lévéque, J.L., 199
Chatzarakis, G.E., 121 Iatcheva, I., 258
Chatzivasiloglou, E., 234 Ioannides, M.G., 263 Maeda, T., 101
Chen, M.H., 478 Toaunou, P., 204 Mahajan, A., 113
Chen, W.-F., 467 Ivanova, M., 229
Mamalis, A.G., xi, 1, 36, 42, 113, 294
Chen, W.-Y., 467 Iwahara, M., 156
Manolakos, D.E., 36, 294
Chen, Y.S., 435
Maricaru, M., 315
Chonan, S., 199 Javora, R., 156 Marquis, F., 36
Chu, C.L., 435 Jibing, S., 445 Marquis, F.D.S., 113
Cingoski, V., 101 Jicai, F., 423
Matsumoto, E., 141
Cranganu-Cretu, B., 305 Juan, W., 423 Medraj, M., 415
Crisi, F., 46
Mei, Z., 462
Cundev, D., 241 Kalbac, M., 107
Mendrinos, L., 16
Cundev, M., 89 Kalokiris, G., 288 Militsyn, S.V., 42
Cvetkovski, G., 89 Kantartzis, N.V., 210 Miya, K., 66
Kanzaki, H., 22
Moschakis, M., 128
Dimitrakakis, G., 204 Karagianni, M., 276
Moses, A.J., 79, 151
DolezZel, I., 269 Katiniotis, I.M., 263 Mészaros, I., 162
Dong, S., 485 Katsikas, P.J., 121
Murakami, M., 52
D’Ovidio, G., 46 Kawaguchi, H., 193
Muta, I., 22
Drew, R.A.L., 415 Kawase, Y., 311
Du, D., 456 Kefalas, T., 288
Nagata, S., 353
Kikuchi, K., 199
Ebihara, D., 75 Kirko, V.I., 42 Nagaya, K., 146
Efremov, A.A.. 58 Kitajima, S., 348 Naito, H., 311
Enokizono, M., 136, 193, 218, 353 Kladas, A., 128, 288, 320 Nakamura, T., 22
Ertan, H.B., 83 Kladas, A.G., 294, 363 Narayanasamy, R., 375
Kohari, Z., 62 Navarra, A., 46
Falaras, P., 107, 224, 234, 276 Kok, M., 381 Niarchos, D., 173
Fowler, G., 407 Korres, G.N., 121 Nishimura, T., 311
Friedman, A., 28 Kosmas, K., 359 Nittono, O., 338
Nitu, C., 253
Koumoutsos, A.K., 294
Georgilakis, P., 320 Kriezis, E., 343 Nitu, S., 253
Giacomo, A.D., 315 Kriezis, E.E., 210 Noguchi, S., 10, 101
Gjoka, M., 173 Krishnakumar, S., 368 Novikov, N.V., 169
Gél, O., 282, 300 Kveglis, L.L, 58
Gélgelioglu, O., 83 Ochsenktihn-Petropoulou, M., 16
Gokhfeld, D.M., 42 Lanzara, G., 46 Ogawa, J., 52
Golovanov, C., 334 Lazarov, V., 96, 229 Ogura, K., 348
Grabner, C., 176 Lei, Y., 497 Otsuka, A., 75
Gramescu, B., 253 Leuca, T., 305 Ovchinnikov, S.G., 42, 58
Elsevier B.V.
doi: 10.1016/S0924-0136(05)00339-0
Journalo f
. Materials
ey Processing
a Technology
Journal of Materials Processing Technology 161 (2005) 516-517
www-.elsevier.com/locate/jmatprotec
Author Index of Volume 161
Altzoumailis, A., 16 Guo, L.F., 462 Li, H., 478, 491
Arabatzis, I.M., 107, 224, 276 Guobin, L., 445 i, J.-Y., 396
Argyropoulou, R., 16 i, M.-Z., 449
Han, C.S., 485 i, Y., 430
Baik, Y., 415 Hantila, F., 315 Liang, Y., 491
Balaev, D.A., 42, 58 Hantila, F.I., 305 Liaw, S.-D., 467
Bao, H., 491 Hashizume, H., 348 Lin, H.C., 435
Barglik, J., 269 Hatziargyriou, N., 128 Lin, K.M., 435
Bayramh, E., 83 He, Y.F., 456 Liu, M., 440
Bodurov, P., 504 Higashikawa, K., 22 Liu, N., 478
Bouzid, W., 388 Hoole, S.R.H., 247, 327, 368 Loisos, G., 151
Hoshino, T., 22 Loizos, Z., 224
Cai, Z.-Y., 449 Hristoforou, E., 33, 359 Lukes, I., 107
Chang, P.-C., 467 Lévéque, J.L., 199
Chatzarakis, G.E., 121 Iatcheva, I., 258
Chatzivasiloglou, E., 234 Ioannides, M.G., 263 Maeda, T., 101
Chen, M.H., 478 Toaunou, P., 204 Mahajan, A., 113
Chen, W.-F., 467 Ivanova, M., 229
Mamalis, A.G., xi, 1, 36, 42, 113, 294
Chen, W.-Y., 467 Iwahara, M., 156
Manolakos, D.E., 36, 294
Chen, Y.S., 435
Maricaru, M., 315
Chonan, S., 199 Javora, R., 156 Marquis, F., 36
Chu, C.L., 435 Jibing, S., 445 Marquis, F.D.S., 113
Cingoski, V., 101 Jicai, F., 423
Matsumoto, E., 141
Cranganu-Cretu, B., 305 Juan, W., 423 Medraj, M., 415
Crisi, F., 46
Mei, Z., 462
Cundev, D., 241 Kalbac, M., 107
Mendrinos, L., 16
Cundev, M., 89 Kalokiris, G., 288 Militsyn, S.V., 42
Cvetkovski, G., 89 Kantartzis, N.V., 210 Miya, K., 66
Kanzaki, H., 22
Moschakis, M., 128
Dimitrakakis, G., 204 Karagianni, M., 276
Moses, A.J., 79, 151
DolezZel, I., 269 Katiniotis, I.M., 263 Mészaros, I., 162
Dong, S., 485 Katsikas, P.J., 121
Murakami, M., 52
D’Ovidio, G., 46 Kawaguchi, H., 193
Muta, I., 22
Drew, R.A.L., 415 Kawase, Y., 311
Du, D., 456 Kefalas, T., 288
Nagata, S., 353
Kikuchi, K., 199
Ebihara, D., 75 Kirko, V.I., 42 Nagaya, K., 146
Efremov, A.A.. 58 Kitajima, S., 348 Naito, H., 311
Enokizono, M., 136, 193, 218, 353 Kladas, A., 128, 288, 320 Nakamura, T., 22
Ertan, H.B., 83 Kladas, A.G., 294, 363 Narayanasamy, R., 375
Kohari, Z., 62 Navarra, A., 46
Falaras, P., 107, 224, 234, 276 Kok, M., 381 Niarchos, D., 173
Fowler, G., 407 Korres, G.N., 121 Nishimura, T., 311
Friedman, A., 28 Kosmas, K., 359 Nittono, O., 338
Nitu, C., 253
Koumoutsos, A.K., 294
Georgilakis, P., 320 Kriezis, E., 343 Nitu, S., 253
Giacomo, A.D., 315 Kriezis, E.E., 210 Noguchi, S., 10, 101
Gjoka, M., 173 Krishnakumar, S., 368 Novikov, N.V., 169
Gél, O., 282, 300 Kveglis, L.L, 58
Gélgelioglu, O., 83 Ochsenktihn-Petropoulou, M., 16
Gokhfeld, D.M., 42 Lanzara, G., 46 Ogawa, J., 52
Golovanov, C., 334 Lazarov, V., 96, 229 Ogura, K., 348
Grabner, C., 176 Lei, Y., 497 Otsuka, A., 75
Gramescu, B., 253 Leuca, T., 305 Ovchinnikov, S.G., 42, 58
Elsevier B.V.
doi: 10.1016/S0924-0136(05)00339-0
Author Index of Volume 161
Panagiotopoulos, I., 173 Stancheva, R., 258 Vasiliu, M., 315
Paparigas, D., 320 Stergiopoulos, T., 107, 234, 276 Vernados, P.G., 263
Papavassiliou, G., 276 Sugiura, H., 199 Vezzetti, E., 509
Pashby, I.R., 407 Sugiyama, S., 396 Vottea, I.N., 36, 42
Penchev, T., 504 Sui, B., 456
Peng, Y., 440 Suzuki, T., 141 Wang, Q., 430
Petkovska, L., 89, 241 Szalay, A., 36 Wang, W., 497
Petrou, J., 33
Watada, M., 75
Petrov, M.I., 42, 58 Tagami, H., 199
Watanabe, H., 338
Ponalagusamy, R., 375 Takagi, T., 338 Wijesinghe, K.R.C., 247, 327
Popkoy, S.I., 58 Takaya, S., 66
Wolfus, Y., 28
eee T., 146 Tanaka, M., 199
rohaszka, J., 162, 181 Tanaka, S., 338
) Tang, Y.Y., 485 Xiaogin, S., 423
Xie, F., 478
Quanmei, G., 445 Tatis, K.V., 363
Xiong, L.J., 456
Tegopoulos, J., 288
Xu, Y.D., 478
_ Raitsios, P., 204 Tegopoulos, J.A., 363
Rizov, P., 96 Tetyeva, T.N., 58
|Ruan, X., 440 Theodoulidis, T., 343 Yajiang, L., 423
| Thompson, W.T., 415 Yamada, K., 338
‘Sachs, E., 509 Tian, Z., 497 Yamada, S., 156
Sarac, V., 89 Todaka, T., 193 Yamagishi, K., 52
Sargentis, Ch., 359 Tomita, M., 52 Yamaguchi, K., 338
Schaeffer, C., 229 Tsamakis, D., 359 Yamaguchi, T., 311
Shaihutdinov, K.A., 42, 58 Tsiboukis, T.D., 186, 210 Yamashita, H., 10, 101
Shaked, N., 28 Tsili, M., 320 Yanagimoto, J., 396
Shi, Y., 497 Tsuboi, T., 22 Yang, H., 440
Shibata, T., 348 Tsuchiya, T., 10 Yang, H.D., 478
Shimoji, H., 136, 218 Tsukamoto, O., 52 Yeshurun, Y., 28
Shipway, P.H., 407 Tutkun, N., 79 Yue, T.M., 462
Shishkov, M., 229 Yuhui, W., 445
Sinvani, M., 28 Udawalpola, M.R., 247, 327
Sobhi-Najafabadi, B., 282, 300 Ulrych, B., 269 Zarudi, M., 28
Souflaris, A., 320 Urma, D., 334 Zeer, G.M., 58
Spyrellis, N., 224, 234 Zhang, H., 456
Srinivasan, P., 375 Vajda, I., 62 Zhou, J., 478
Stamopoulos, D., 33 Valasiadis, A., 33 Zygiridis, T.T., 186
Journal of
Materials
Processing
aS Technology
ELSEVIER
Journal of Materials Processing Technology 161 (2005) 518-525
www.elsevier.com/locate/jmatprotec
Subject Index of Volume 161
AC loss Bifurcation diagram
Mechanism of decay of trapped magnetic field in HTS bulk caused Effect of dynamic core losses on ferroresonance phenomena, 156
by application of AC magnetic field, 52 Boundary element method
Acquisition Boundary element method for multiply connected domains, 315
Low frequency magnetic field parameters acquisition and proces-
sing, 334 CAM
AFM CAM system for filament winding on elbows, 491
Incorporation of innovative compounds in nanostructured photo- Ceramics
electrochemical cells, 107 Synthesis of superhard materials, 169
Air gap Cermets
Magnetic permeance of the air gap between two toothed structures, Cutting and wearing characteristics of TiC-based cermets cutters
96 with nano-TiN addition, 478
AIN sintering Chaotic oscillations
Understanding AIN sintering through computational thermo- Effect of dynamic core losses on ferroresonance phenomena, 156
dynamics combined with experimental investigation, 415 Chipless machining
AIN-AI,03-Y>0; phase diagram Abrasive water-jet controlled depth milling of Ti6AI4V alloy — an
Understanding AIN sintering through computational thermo- investigation of the role of jet-workpiece traverse speed and
dynamics combined with experimental investigation, 415 abrasive grit size on the characteristics of the milled material,
AI,O; particle 407
Production and mechanical properties of Al,O; particle-reinforced Circuit breaker status
2024 aluminium alloy composites, 381 Identification of analog and topological measurement errors in
Aluminium alloy generalized state estimation, 121
Production and mechanical properties of Al,O; particle-reinforced Circular-are ball-end milling cutter
2024 aluminium alloy composites, 381 A study of design and manufacturing models for circular-arc ball-
Aluminum stabilized superconductor end milling cutters, 467
Transient stability analysis of large aluminum stabilized super- Co-generation
conductor by 3D finite element method, 10 Hybrid solar collector, 229
Ambulance Coil impedance calculation
Development on 2DOF-type and Rotary-type shock absorber Series expansions in eddy current nondestructive evaluation mod-
damper using MRF and their efficiencies, 146 els, 343
Analog and topological measurement errors Cold extrusion
Identification of analog and topological measurement errors in A finite element model for hydrodynamic lubrication of cold
generalized state estimation, 121 extrusion with frictional boundary condition, 440
Anisotropy Compaction
Vector magneto-hysteretic engineering model, 136 Explosive compaction/cladding of YBCO discs: a numerical
Some of the technologies, which can improve the properties of approach, 36
anisotropic materials, 181 Composite PEO-titania—I—/I3— electrolyte
Austenitic stainless steel Incorporation of innovative compounds in nanostructured photo-
Magnetic investigation of the effect of ~'-martensite on the proper- electrochemical cells, 107
ties of austenitic stainless steel, 162 Composites
AWJ CAM system for filament winding on elbows, 491
Abrasive water-jet controlled depth milling of Ti6AI4V alloy — an Computational electromagnetics
investigation of the role of jet-workpiece traverse speed and A topologically consistent class of 3-D higher order curvilinear
abrasive grit size on the characteristics of the milled material, 407 FDTD schemes for dispersion-optimized EMC and material
modeling, 210
Bad data analysis Computer aided design (CAD)
Identification of analog and topological measurement errors in 2D finite element analysis data creating system with CAD data,
generalized state estimation, 121 311
Barkhausen noise Computer aided engineering (CAE)
Analysis of Barkhausen noise using Monte Carlo simulation for 2D finite element analysis data creating system with CAD data,
nondestructive evaluation, 338 311
Bi-2223/Ag multifilamentary tape Computer control
Analysis of shielding property in Bi-2223/Ag multifilamentary Application of electromagnetic actuators to a variable distribution
tapes with multi-layer arrangement, 22 system for automobile engines, 253
Elsevier B.V.
doi: 10.1016/S0924-0136(05)00340-7
Subject Index of Volume 161
Computer simulation Disinflated rate
Finite element modeling of hydrogen diffusion in fusion zone of Transformers of reduced losses and evaluation of their repair,
HQ130 high strength steel, 423 204
Constitutive equation Distribution transformers
Comparison of Jiles—Atherton and Preisach models extended to Numerical techniques for design and modeling of distribution
stress dependence in magnetoelastic behaviors of a ferro- transformers, 320
magnetic material, 141 Double output system
Contact Operation of induction generator in the magnetic saturation region
Finite element simulation of multi-point sheet forming process as a Self-excited and as a double output system, 263
based on implicit scheme, 449 DSC
Continual induction hardening Production and characterization of MgB» coatings on various
Continual induction hardening of axi-symmetric bodies, 269 substrates by electrophoretic deposition, 16
C' continuity D-SMES
A common algorithm for various parametric geometric changes in A voltage source converter model for exchanging active and
finite element design sensitivity computation, 368 reactive power with a distribution network, 128
Control DXF
Development on 2DOF-type and Rotary-type shock absorber 2D finite element analysis data creating system with CAD data,
damper using MRF and their efficiencies, 146 311
Cooling curve recognition Dyes
Intelligent evaluation of melt iron quality by pattern recognition of Modification of TiO. semiconductor with molecules bearing func-
thermal analysis cooling curves, 430 tional phosphonic groups: a 31P solid state NMR study, 276
Corrosion resistance
The effect of laser cladding on the corrosion resistance of magne- Eddy current models
sium ZK60/SiC composite, 462 Series expansions in eddy current nondestructive evaluation
Cubic boron nitride models, 343
Synthesis of superhard materials, 169 Eddy current testing (ECT)
E-J curves Experimental study on NDT method using electromagnetic waves,
Analysis of shielding property in Bi-2223/Ag multifilamentary 348
tapes with multi-layer arrangement, 22 Eddy current tests
Cutting Numerical simulations and experiments of eddy current tests under
Effect of mechanical and Nd:YAG laser cutting on magnetic flux various excitation methods
distribution near the cut edge of non-oriented steels, 151 Eddy currents
Cutting characteristics Geometry optimization of solid rotor eddy current brake by using
Cutting and wearing characteristics of TiC-based cermets cutters sensitivity analysis and 3D finite elements, 363
with nano-TiN addition, 478 Edge elements
Cutting force Boundary element method for multiply connected domains, 315
Cutting parameter optimization to minimize production time in Efficiency
high speed turning, 388 Development on 2DOF-type and Rotary-type shock absorber
Cylindrical coordinate damper using MRF and their efficiencies, 146
An automatic hexahedral mesh generation method for hexahedral Electrical device
elements towards rotating machine, 101 Features and classes for an optimisation tool for electrical device
designs and computer-aided instruction, 327
2D FEA data generator Electrical machines
2D finite element analysis data creating system with CAD data, Magnetic characteristic analysis of electrical machines by vector
311 magneto-hysteretic E&S* model, 218
3D finite element method Electrical steels
Transient stability analysis of large aluminum stabilized super- Effect of mechanical and Nd:YAG laser cutting on magnetic flux
conductor by 3D finite element method, 10 distribution near the cut edge of non-oriented steels, 151
DC flash butt welding Electromagnetic actuator
FEM simulation on microstructure of DC flash butt welding for an Application of electromagnetic actuators to a variable distribution
ultra-fine grain steel, 497 system for automobile engines, 253
Deterministic techniques Electromagnetic field
Deterministic techniques for design optimisation of electromotion Continual induction hardening of axi-symmetric bodies, 269
devices with multiple objectives, 282 Electromagnetic forming
Detonation velocity Physical principles of electromagnetic forming process: a consti-
Shock synthesis and densification of tungsten based heavy alloys, tutive finite element model, 294
113 Electromagnetic torque
Diamond Computation of electromechanical characteristic of salient poles
Synthesis of superhard materials, 169 synchronous motor with damper based on FEM, 241
Diamond films Electromechanical characteristic
Synthesis of superhard materials, 169 Computation of electromechanical characteristic of salient poles
Die forging synchronous motor with damper based on FEM, 241
Industrial rocket engine and its application for propelling of forging Electromotion devices
hammers, 504 Deterministic techniques for design optimisation of electromotion
Diffusion operator devices with multiple objectives, 282
Microwave ovens electromagnetic field analysis by means of Use of evolutionary techniques for multi-objective optimisation of
boundary element method, 305 electromotion devices, 300
520 Subject Index of Volume 161
Electrophoresis Geometry optimization of solid rotor eddy current brake by using
Production and characterization of MgB> coatings on various sensitivity analysis and 3D finite elements, 363
substrates by electrophoretic deposition, 16 Finite element modeling of hydrogen diffusion in fusion zone of
Erosion HQ130 high strength steel, 423
Abrasive water-jet controlled depth milling of Ti6AI4V alloy — an A finite element model for hydrodynamic lubrication of cold
investigation of the role of jet-workpiece traverse speed and extrusion with frictional boundary condition, 440
abrasive grit size on the characteristics of the milled material, Finite element techniques
407 Design of skewed mounted permanent magnet synchronous gen-
E&S* model erators based on 2D and 3D finite element techniques, 288
Magnetic characteristic analysis of electrical machines by vector Finite-difference time-domain methods
magneto-hysteretic E&S* model, 218 A topologically consistent class of 3-D higher order curvilinear
Evolutionary techniques FDTD schemes for dispersion-optimized EMC and material
Use of evolutionary techniques for multi-objective optimisation of modeling, 210
electromotion devices, 300 Fission reactor
Excitation methods. Experimental study on NDT method using electromagnetic waves,
Numerical simulations and experiments of eddy current tests under 348
various excitation methods, 353 Flow stress curves
Exposure Microstructural evolution and flow stress of semi-solid type 304
Low frequency magnetic field parameters acquisition and proces- stainless steel, 396
sing, 334 Flux gate sensor
Application of magnetic phenomena to analysis of stress corrosion
Fatigue cracking in welded part of stainless steel, 66
Analysis of Barkhausen noise using Monte Carlo simulation for Frictional boundary condition
nondestructive evaluation, 338 A finite element model for hydrodynamic lubrication of cold
Fe-based shape memory alloys extrusion with frictional boundary condition, 440
The wire electro-discharge machining characteristics of Fe-30Mn- Functional anchoring groups
6Si and Fe-30Mn-6Si-SCr shape memory alloys, 435 Modification of TiO, semiconductor with molecules bearing func-
FEM tional phosphonic groups: a 31P solid state NMR study, 276
Analysis of shielding property in Bi-2223/Ag multifilamentary
tapes with multi-layer arrangement, 22 General curvilinear coordinates
Dynamic behaviour investigation of electromagnetic force densi- A topologically consistent class of 3-D higher order curvilinear
ties, 258 FDTD schemes for dispersion-optimized EMC and material
Ferromagnetic material modeling, 210
Comparison of Jiles—Atherton and Preisach models extended to Generalized state estimation
stress dependence in magnetoelastic behaviors of a ferromag- Identification of analog and topological measurement errors in
netic material, i41 generalized state estimation, 121
Ferroresonance Genetic algorithms (GAs)
Effect of dynamic core losses on ferroresonance phenomena, 156 Comparison between two target functions for optimization of single
Fiber path phase shaded-pole motor using method of genetic algorithms,
CAM system for filament winding on elbows, 491 89
Filament winding Geometrical parameters
CAM system for filament winding on elbows, 491 Numerical techniques for design and modeling of distribution
Finite difference time domain methods transformers, 320
Phase error reduction in general FDTD methods via optimum Glass/Al-Mg composites
configuration of material parameters, 186 Interfacial reactions in glass/AlI-Mg composite fabricated by pow-
Finite element analysis (FEA) der metallurgy process, 445
On the use of a homogenization technique for the modeling of Graphic user interface
anisotropic magnetic material properties in a finite element Towards object-oriented finite element pre-processors exploiting
analysis, 176 modern computer technology, 247
Towards object-oriented finite element pre-processors exploiting Green function
modern computer technology, 247 Microwave ovens electromagnetic field analysis by means of
2D finite element analysis data creating system with CAD data, 311 boundary element method, 305
Finite element simulation of multi-point sheet forming process
based on implicit scheme, 449 Hall sensor
Finite element analysis program Non-destructive evaluation of magnetic metallic materials using
Features and classes for an optimisation tool for electrical device Hall sensors, 359
designs and computer-aided instruction, 327 Hammer
Finite element design Industrial rocket engine and its application for propelling of forging
A common algorithm for various parametric geometric changes in hammers, 504
finite element design sensitivity computation, 368 Haptic sensation
Finite element method Active haptic sensation for monitoring skin conditions, 199
Magnetic permeance of the air gap between two toothed structures, Hardness
96 Continual induction hardening of axi-symmetric bodies, 269
An automatic hexahedral mesh generation method for hexahedral Harmonic frequencies
elements towards rotating machine, 101 Design of skewed mounted permanent magnet synchronous
Computation of electromechanical characteristic of salient poles generators based on 2D and 3D finite element tachniques,
synchronous motor with damper based on FEM, 241 288
Subject Index of Volume 161
Heat affected zone Interface
Finite element modeling of hydrogen diffusion in fusion zone of Low frequency magnetic field parameters acquisition and proces-
HQ130 high strength steel, 423 sing, 334
Heat treatment Interfacial reactions
Dependence of the structural and superconducting properties of Interfacial reactions in glass/Al-Mg composite fabricated by pow-
MgB; pellets on the thermal profiles of the manufacturing der metallurgy process, 445
process, 33
Hexahedral element Jiles—Atherton model
An automatic hexahedral mesh generation method for hexahedral Comparison of Jiles-Atherton and Preisach models extended to
elements towards rotating machine, 101 stress dependence in magnetoelastic behaviors of a ferromag-
High pressures netic material, 141
Synthesis of superhard materials, 169
High speed machining Kinetics
Cutting parameter optimization to minimize production time in Interfacial reactions in glass/AlI-Mg composite fabricated by pow-
high speed turning, 388 der metallurgy process, 445
High strength steel
Finite element modeling of hydrogen diffusion in fusion zone of Laser cladding
HQ130 high strength steel, 423 The effect of laser cladding on the corrosion resistance of magne-
Higher order schemes sium ZK60/SiC composite, 462
Phase error reduction in general FDTD methods via optimum Laser texturing
configuration of material parameters, 186 Laser texturing of rollers by pulsed Nd:YAG laser, 456
A topologically consistent class of 3-D higher order curvilinear Levitation force
FDTD schemes for dispersion-optimized EMC and material The synthesis, microstructure, transport and magnetic properties of
modeling, 210 Bi-based low density HTSC, 58
High-speed drive Loss distribution
A proposal of the servo-driven high-speed surface motor, 75 Localised losses in stator laminations of an induction motor under
High-temperature superconductors PWM excitation, 79
Design of a laminated-steel magnetic core for use in a HT-SMES, Loss of symmetry
28 Effect of dynamic core losses on ferroresonance phenomena, 156
Homogenization technique
On the use of a homogenization technique for the modeling of Machine path
anisotropic magnetic material properties in a finite element CAM system for filament winding on elbows, 491
analysis, 176 Magnesium composite
HT superconductor The effect of laser cladding on the corrosion resistance of magne-
Magnetic levitation by height temperature superconductor plates sium ZK60/SiC composite, 462
short secondary interacting with translating field: experiences, Magnetic barkhausen noise
measurements and modelling, 46 Magnetic investigation of the effect of ~'-martensite on the proper-
HTS bulk ties of austenitic stainless steel, 162
Mechanism of decay of trapped magnetic field in HTS bulk caused Magnetic characteristic analysis
by application of AC magnetic field, 52 Magnetic characteristic analysis of electrical machines by vector
HTS cable ; magneto-hysteretic E&S* model, 218
Analysis of shielding property in Bi-2223/Ag multifilamentary Magnetic coenergy
tapes with multi-layer arrangement, 22 Computation of electromechanical characteristic of salient poles
HTS motor synchronous motor with damper based on FEM, 241
Mechanism of decay of trapped magnetic field in HTS bulk caused Magnetic core
by application of AC magnetic field, 52 Design of a laminated-steel magnetic core for use in a HT-SMES, 28
Hybrid Magnetic field
Hybrid solar collector, 229 Thermal and magnetic field analysis of induction heating problems,
Hysteretic magnetic behavior 193
Vector magneto-hysteretic engineering model, 136 Low frequency magnetic field parameters acquisition and proces-
sing, 334
Implicit formulation Magnetic field distribution
Finite element simulation of multi-point sheet forming process Computation of electromechanical characteristic of salient poles
based on implicit scheme, 449 synchronous motor with damper based on FEM, 241
In vitro and in vivo experiment Magnetic flux leakage
Active haptic sensation for monitoring skin conditions, 199 Non-destructive evaluation of magnetic metallic materials using
Induction generator Hall sensors, 359
Operation of induction generator in the magnetic saturation region Magnetic force microscope
as a self-excited and as a double output system, 263 Application of magnetic phenomena to analysis of stress corrosion
Induction heating cracking in welded part of stainless steel, 66
Continual induction hardening of axi-symmetric bodies, 269 Magnetic levitation and traction
Induction motors Magnetic levitation by height temperature superconductor plates
Localised losses in stator laminations of an induction motor under short secondary interacting with translating field: experiences,
PWM excitation, 79 measurements and modelling, 46
Industrial rocket engine Magnetic losses
Industrial rocket engine and its application for propelling of forging Localised losses in stator laminations of an induction motor under
hammers, 504 PWM excitation, 79
Subject Index of Volume 161
Magnetic materials Metal-sheathed
Powder metal development for electrical motor applications, 83 Explosive compaction/cladding of YBCO discs: a numerical
Some of the technologies, which can improve the properties of approach, 36
anisotropic materials, 181 Methodology
Magnetic measurements Numerical techniques for design and modeling of distribution
Structure and magnetic properties of Sm(Co;_,.M,)s (M = Cu, Ag) transformers, 320
alloys, 173 MgB>
Magnetic nondestructive inspection method Dependence of the structural and superconducting properties of
Application of magnetic phenomena to analysis of stress corrosion MgB, pellets on the thermal profiles of the manufacturing
cracking in welded part of stainless steel, 66 process, 33
Magnetic permeance MgB, superconductor
Magnetic permeance of the air gap between two toothed structures, Production and characterization of MgB. coatings on various
96 substrates by electrophoretic deposition, 16
Magnetic properties Micromagnetic measurements
Powder metal development for electrical motor applications, 83 Magnetic investigation of the effect of «’-martensite on the proper-
Effect of mechanical and Nd:YAG laser cutting on magnetic flux ties of austenitic stainless steel, 162
distribution near the cut edge of non-oriented steels, 151 Microstructure simulation
Magnetic saturation region FEM simulation on microstructure of DC flash butt welding for an
Operation of induction generator in the magnetic saturation region ultra-fine grain steel, 497
as a self-excited and as a double output system, 263 Microstructure
Magnetically ordered materials Microstructural evolution and flow stress of semi-solid type 304
Structure and magnetic properties of Sm(Co;_,M,)5 (M = Cu, Ag) stainless steel, 396
alloys, 173 Microwave ovens
Magnetization process Microwave ovens electromagnetic field analysis by means of
Analysis of Barkhausen noise using Monte Carlo simulation for boundary element method, 305
nondestructive evaluation, 338 Model of hydrodynamic lubrication
Magnetoelastic coupling A finite element model for hydrodynamic lubrication of cold
Comparison of Jiles-Atherton and Preisach models extended to extrusion with frictional boundary condition, 440
stress dependence in magnetoelastic behaviors of a ferromag- Monitoring skin conditions
netic material, 141 Active haptic sensation for monitoring skin conditions, 199
Manufacturing Monte Carlo method
A study of design and manufacturing models for circular-arc ball- Analysis of Barkhausen noise using Monte Carlo simulation for
end milling cutters, 467 nondestructive evaluation, 338
Manufacturing engineering FEM simulation on microstructure of DC flash butt welding for an
Advanced manufacturing engineering, | ultra-fine grain steel, 497
Martensitic transformation Morphologies
Application of magnetic phenomena to analysis of stress corrosion Microstructural evolution and flow stress of semi-solid type 304
cracking in welded part of stainless steel, 66 stainless steel, 396
Material modeling MRF
A topologically consistent class of 3-D higher order curvilinear Development on 2DOF-type and Rotary-type shock absorber dam-
FDTD schemes for dispersion-optimized EMC and material per using MRF and their efficiencies, 146
modeling, 210 Multi-objective optimisation
Mathematical model Deterministic techniques for design optimisation of electromotion
A research on the non-NC machining of two kinds of revolving devices with multiple objectives, 282
cutters, 485 Use of evolutionary techniques for multi-objective optimisation of
Maxwell stress tensor electromotion devices, 300
Dynamic behaviour investigation of electromagnetic force densi- Multi-point forming
ties, 258 Finite element simulation of multi-point sheet forming process
Mechanism based on implicit scheme, 449
Abrasive water-jet controlled depth milling of Ti6A14V alloy — an
investigation of the role of jet-workpiece traverse speed and Nano addition
abrasive grit size on the characteristics of the milled material, Cutting and wearing characteristics of TiC-based cermets cutters
407 with nano-TiN addition, 478
Mechatronics Nanocrystalline solar cell
Application of electromagnetic actuators to a variable distribution Solid-state sensitized solar cells, using [Ru(dcbpyH2)sCl,]-2H2O
system for automobile engines, 253 as the dye and PEO/titania/I/I,” as the redox electrolyte,
Melt iron features 234
Intelligent evaluation of melt iron quality by pattern recognition of Nanotechnology processing
thermal analysis cooling curves, 430 Advanced manufacturing engineering, |
Mesh generation NC machining
An automatic hexahedral mesh generation method for hexahedral A study of design and manufacturing models for circular-arc ball-
elements towards rotating machine, 101 end milling cutters, 467
Mesh generator Nondestructive evaluation
2D finite element analysis data creating system with CAD data, 311 Analysis of Barkhausen noise using Monte Carlo simulation for
Metal matrix composites nondestructive evaluation, 338
Production and mechanical properties of Al,O; particle-reinforced Series expansions in eddy current nondestructive evaluation mod-
2024 aluminium alloy composites, 381 els, 343
Subject Index of Volume 161
Non-destructive evaluation Phase transformation
Non-destructive evaluation of magnetic metallic materials using Magnetic investigation of the effect of «/-martensite on the proper-
Hall sensors, 359 ties of austenitic stainless steel, 162
Non-destructive testing (NDT) Phosphonated group
Experimental study on NDT method using electromagnetic waves, Incorporation of innovative compounds in nanostructured photo-
348 electrochemical cells, 107
Non-linear self and leakage inductance computation Phosphonic acids
On the use of a homogenization technique for the modeling of Modification of TiO, semiconductor with molecules bearing
anisotropic magnetic material properties in a finite element functional phosphonic groups: a 31P solid state NMR study,
analysis, 176 276
Non-NC machining Photocatalytic reactor
A research on the non-NC machining of two kinds of revolving Design and theoretical study of a packed bed photoreactor, 224
cutters, 485 Photovoltaic
Numerical analysis Hybrid solar collector, 229
Continual induction hardening of axi-symmetric bodies, 269 Post-processing
Numerical dispersion Towards object-oriented finite element pre-processors exploiting
Phase error reduction in general FDTD methods via optimum modern computer technology, 247
configuration of material parameters, 186 Powder metal composites
Numerical modeling Powder metal development for electrical motor applications, 83
Phase error reduction in general FDTD methods via optimum Power system
configuration of material parameters, 186 Transformers of reduced losses and evaluation of their repair, 204
Numerical simulations Preisach model
Physical principles of electromagnetic forming process: a consti- Comparison of Jiles-Atherton and Preisach models extended to
tutive finite element model, 294 stress dependence in magnetoelastic behaviors of a ferromag-
Numerical simulations and experiments of eddy current tests under netic material, 141
various excitation methods, 353 Pre-processing
Numerical solution of partial differential equations Towards object-oriented finite element pre-processors exploiting
A topologically consistent class of 3-D higher order curvilinear modern computer technology, 247
FDTD schemes for dispersion-optimized EMC and material Process simulation
modeling, 210 Numerical simulation of deposition process for a new 3DP print-
head design, 509
Open-type magnetizer Programming
Thermal and magnetic field analysis of induction heating problems, A common algorithm for various parametric geometric changes in
193 finite element design sensitivity computation, 368
Optimisation tool Properties
Features and classes for an optimisation tool for electrical device Some of the technologies, which can improve the properties of
designs and computer-aided instruction, 327 anisotropic materials, 181
Optimization 31P solid state NMR
Comparison between two target functions for optimization of single Modification of TiO, semiconductor with molecules bearing func-
phase shaded-pole motor using method of genetic algorithms, tional phosphonic groups: a 31P solid state NMR study, 276
89 PWM voltage supply
A common algorithm for various parametric geometric changes in Localised losses in stator laminations of an induction motor under
finite element design sensitivity computation, 368 PWM excitation, 79
Cutting parameter optimization to minimize production time in
high speed turning, 388 Q maps
Optimization methods Effect of dynamic core losses on ferroresonance phenomena, 156
Geometry optimization of solid rotor eddy current brake by using
sensitivity analysis and 3D finite elements, 363 RAMAN
Production and characterization of MgB», coatings on various
Particle-reinforced composite substrates by electrophoretic deposition, 16
Production and mechanical properties of Al,O; particle-reinforced Rapid prototyping
2024 aluminium alloy composites, 381 Numerical simulation of deposition process for a new 3DP print-
PDF film head design, 509
Active haptic sensation for monitoring skin conditions, 199 Reduced losses
Percolation depinning model Transformers of reduced losses and evaluation of their repair,
Analysis of shielding property in Bi-2223/Ag multifilamentary 204
tapes with multi-layer arrangement, 22 Reverse engineering
Performance characteristics A study of design and manufacturing models for circular-arc ball-
Comparison between two target functions for optimization of single end milling cutters, 467
phase shaded-pole motor using method of genetic algorithms, Revolving cutter
89 A research on the non-NC machining of two kinds of revolving
Permanent magnets cutters, 485
Design of skewed mounted permanent magnet synchronous Roll
generators based on 2D and 3D finite element techniques, 288 Laser texturing of rollers by pulsed Nd:YAG laser, 456
Phase change Rotating machine
Microstructural evolution and flow stress of semi-solid type 304 An automatic hexahedral mesh generation method for hexahedral
stainless steel, 396 elements towards rotating machine, 101
524 Subject Index of Volume 161
Rotating machines SnO, films
Geometry optimization of solid rotor eddy current brake by using Incorporation of innovative compounds in nanostructured photo-
sensitivity analysis and 3D finite elements, 363 electrochemical cells, 107
Roughness Solid-state composite polymer electrolyte
Cutting parameter optimization to minimize production time in Solid-state sensitized solar cells, using [Ru(dcbpyH2)2Cl.]-2H20 as
high speed turning, 388 the dye and PEO/titania/I/I,” as the redox electrolyte, 234
Abrasive water-jet controlled depth milling of Ti6AI4V alloy — an Solid-state dye-sensitized solar cell
investigation of the role of jet-workpiece traverse speed and Incorporation of innovative compounds in nanostructured photo-
abrasive grit size on the characteristics of the milled material, electrochemical cells, 107
407 Sombrero shaped bumps
R-TM intermetallics Laser texturing of rollers by pulsed Nd:YAG laser, 456
Structure and magnetic properties of Sm(Co,_,.M,)s (M = Cu, Ag) SQUID
alloys, 173 Production and characterization of MgB. coatings on various
Ru(II) complexes substrates by electrophoretic deposition, 16
Incorporation of innovative compounds in nanostructured photo- Stored energy computation
electrochemical cells, 107 Design of a laminated-steel magnetic core for use in a HT-SMES,
Ru(II)-diaqua-dcbpy dyes 28
Solid-state sensitized solar cells, using [Ru(dcbpyH>)sCl,]-2H,O Strain induced martensite
as the dye and PEO/titania/I/I,;" as the redox electrolyte, Magnetic investigation of the effect of «’-martensite on the proper-
234 ties of austenitic stainless steel, 162
Stress corrosion cracking
Salient poles synchronous motor with damper Application of magnetic phenomena to analysis of stress corrosion
Computation of electromechanical characteristic of salient poles cracking in welded part of stainless steel, 66
synchronous motor with damper based on FEM, 241 Superconducting foam
Scalar and vector magnetic potential The synthesis, microstructure, transport and magnetic properties of
Boundary element method for multiply connected domains, 315 Bi-based low density HTSC, 58
Scanning electron microscopy (SEM) Superconducting magnetic energy storage
The synthesis, microstructure, transport and magnetic properties of Design of a laminated-steel magnetic core for use in a HT-SMES,
Bi-based low density HTSC, 58 28
Semi-solid forming Superconducting properties
Microstructural evolution and flow stress of semi-solid type 304 Dependence of the structural and superconducting properties of
stainless steel, 396 MgB; pellets on the thermal profiles of the manufacturing
Series expansions process, 33
Series expansions in eddy current nondestructive evaluation mod- Surface modification
els, 343 Modification of TiO, semiconductor with molecules bearing func-
Servo drive tional phosphonic groups: a 31P solid state NMR study, 276
A proposal of the servo-driven high-speed surface motor, 75 Surface motor
Shape optimization A proposal of the servo-driven high-speed surface motor, 75
A common algorithm for various parametric geometric changes in Surface roughness profile
finite element design sensitivity computation, 368 Laser texturing of rollers by pulsed Nd:YAG laser, 456
Sheet metal forming Switched reluctance machine
Finite element simulation of multi-point sheet forming process On the use of a homogenization technique for the modeling of
based on implicit scheme, 449 anisotropic magnetic material properties in a finite element
Shielding property analysis, 176 ‘
Analysis of shielding property in Bi-2223/Ag multifilamentary
tapes with multi-layer arrangement, 22 Technology
Shock Some of the technologies, which can improve the properties of
Development on 2DOF-type and Rotary-type shock absorber dam- anisotropic materials, 181
per using MRF and their efficiencies, 146 Temperature field
Shock densification Continual induction hardening of axi-symmetric bodies, 269
Shock synthesis and densification of tungsten based heavy alloys, Terpyridine
113 Incorporation of innovative compounds in nanostructured photo-
Shock synthesis electrochemical cells, 107
Shock synthesis and densification of tungsten based heavy alloys, Textures
113 Some of the technologies, which can improve the properties of
Simulation anisotropic materials, 181
A voltage source converter model for exchanging active and Thermal analysis
reactive power with a distribution network, 128 Intelligent evaluation of melt iron quality by pattern recognition of
A study of design and manufacturing models for circular-arc ball- thermal analysis cooling curves, 430
end milling cutters, 467 Thermal solar collector
Single phase shaded-pole motor Hybrid solar collector, 229
Comparison between two target functions for optimization of single Thermodynamic modeling
phase shaded-pole motor using method of genetic algorithms, Understanding AIN sintering through computational thermo-
89 dynamics combined with experimental investigation, 415
Skewed rotors Thermodynamics
Design of skewed mounted permanent magnet synchronous gen- Interfacial reactions in glass/AlI-Mg composite fabricated by
erators based on 2D and 3D finite element techniques, 288 powder metallurgy process, 445