Table Of Content

Journal of Materials Processing Technology ELSEVIER Journal of Materials Processing Technology 150 (2004) 317 www.elsevier.com/locate/jmatprotec Author Index of Volume 150 Agan, S., 208 Juster, N.P., 182 Schreiner, W.E., 263 Aksoy, I., 208 Sebastidn Pérez, M.A., 223 Alasti, M., 92 Kadkhodaei, M., 215 Sheppard, T., 100 Alberti, N., 2 Kahveci, N., 208 Shi, Y.H., 62 Arenas Reina, J.M., 223 Kang, D.C., 40 Shivpuri, R., 70, 107, 124 Asakawa, M., 10 Khalid, Y.A., 242 Soe, S.P., 201 Aspinwall, D.K., 116 Kiritani, M., 300 Soo, S.L., 116 Konishi, M., 300 Spim, J.A., 255 Balendra, R., 30, 84 Koskinen, J., 309 Spinelli, J-E., 255 Bryant IV, I.H., 151 Kuzman, K., 163 Stringfield, J.M., 280 Byrne, G., 201 Sun, C.G., 263 Lang, L.H., 25, 40 Cai, J., 48 Levy, B.S., 280 Takagi, J.-i., 234 Chan, C.L., 242 Li, G.Y., 76 Tan, M.J., 76 Chang, K.-H., 151 Li, R., 170 Tang, Q.B., 56 Chen, X., 170 Liew, K.M., 76 Teng, B.G., 25 Lin, T., 170 Tosetti, J.P., 255 Damodaran, D., 70 Liu, F, 175 Tsukuda, A., 234 Danckert, J., 40 Liu, G., 56 Dean, T.A., 48 Liu, M., 234 Van Tyne, C.J., 280 Dewes, R.C., 116 Liu, Y., 145, 290 Venus, A., 201 Doege, E., 92 Lou, Z., 194 Dohmann, F., 18 Wang, L., 170 Duan, X., 100 Ma, Y., 30 Wang, R.W., 56 Dunne, P., 201 Makarovic, M., 163 Wang, Z.J., 25 Makinouchi, A., 10 Wang, Z.R., 25, 56 Fischer, F.D., 263 Manarvi, I.A., 182 Werner, E.A., 263 Fratini, L., 2 Matsugi, K., 300 Whalley, D.C., 134 Wheatley, A.R., 201 Gantar, G., 163 Nielsen, K.B., 40 Garcia, A., 255 Xiong, S., 175 Gaya, C.G., 223 Paro, J.A., 309 Gustafsson, T.E., 309 Pauskar, P., 107 Yanagisawa, O., 300 Giiven, K., 208 Peng, X., 84, 145 Yang, C., 170 Phadke, S., 107 Yang, H., 290 Hama, T., 10 Yasar, M., 270 Hamouda, A.M.S., 242 Qin, Y., 1, 30, 84, 145 Vi, &., 175 Hartl, Ch., 18 You, L.H., 62 Hu, J.H., 62 Ruan, X., 194 Yuan, S.J., 25 Hu, X.L., 56 Hu, Z.M., 48 Sahari, B.B., 242 Zhan, M., 290 Hua, J., 124 Salimi, M., 215 Zhang, J., 175 Huang, S.D., 56 Santos, C.A., 255 Zhang, J.J., 62 San, U., 208 Zhang, L.B., 56 Jiang, H., 194 Schmidt-Jiirgensen, R., 92 Zhang, S.H., 40 ‘, Pe Elsevier B.V. doi: 10.1016/S0924-0136(04)00808-8 Journal of Materials Processing Technology Journal of Materials Processing Technology 150 (2004) 318-321 www.elsevier.com/locate/jmatprotec Subject Index of Volume 150 Adaptation part-process Cooling rates Parametric classification based on technico-economic approaches Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich to optimize the design and manufacturing of hot forged parts, alloys, 208 +EYiTst O M 223 Corrugation direction Aircraft torque tube Bending behaviour of corrugated web beams, 242 Concurrent design and manufacturing of aircraft torque tubes, 151 Corrugation radius Analysis accuracy Bending behaviour of corrugated web beams, 242 Accurate friction and heat transfer laws for enhanced simulation Crack propagation models of precision forging processes, 92 3D FE modelling of the cutting of Inconel 718, 116 Assembly design Cross-sectional area Framework of an integrated tolerance synthesis model and using FE Bending behaviour of corrugated web beams, 242 simulation as a virtual tool for tolerance allocation in assembly Cutting design, 182 3D FE modelling of the cutting of Inconel 718, 116 Asymmetrical rolling Slab analysis of asymmetrical sheet rolling, 215 3D rigid—viscoplastic FEM Automotive parts Deformation characteristic of the precision forging of a blade with a FE simulation for concurrent design and manufacture of automotive damper platform using 3D FEM analysis, 290 sheet-metal parts, 145 Design for manufacture Framework of an integrated tolerance synthesis model and using FE Bearing steel simulation as a virtual tool for tolerance allocation in assembly Effect of tool nose radius and tool wear on residual stress distribu- design, 182 tion in hard turning of bearing steel, 234 Design optimization Bending strength Hydroforming-applications of coherent FE-simulations to the Bending behaviour of corrugated web beams, 242 development of products and processes, 18 aMhRnE0a2AARDlL T n Sag O Blade with a damper platform Concurrent design and manufacturing of aircraft torque tubes, 151 Deformation characteristic of the precision forging of a blade with a An industrial example of FE supported development of a new damper platform using 3D FEM analysis, 290 product, 163 Bulk forming Detonation forming Applications of numerical simulation to the analysis of bulk- Gas detonation forming process and modeling for efficient spring- forming processes—case studies, 56 back prediction, 270 Dimensional accuracy CAE Study of the key technologies of LOM for functional metal parts, 175 Innovative sheet metal forming processes: numerical simulations Dispersion strengthening and experimental tests, 2 Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich Hydroforming-applications of coherent FE-simulations to the alloys, 208 development of products and processes, 18 Drilling CBN tool Drilling of X2CrNi 19 11 stainless steel with hiped NiTi coating, 309 Effect of tool nose radius and tool wear on residual stress distribu- Dynamic excitation tion in hard turning of bearing steel, 234 Finite element simulation of the dynamical behavior of a speed- Chip formation increase gearbox, 170 3D FE modelling of the cutting of Inconel 718, 116 Dynamic response Chip morphology Finite element simulation of the dynamical behavior of a speed- Prediction of chip morphology and segmentation during the increase gearbox, 170 machining of titanium alloys, 124 Concurrent design and manufacture Electric energy Pressurising materials and process design considerations of the Joining of spheroidal graphite cast iron to stainless steel by impact- pressure-assisted injection forging of thick-walled tubular com- electric current discharge joining, 300 ponents, 30 Extrusion-upsetting FE simulation for concurrent design and manufacture of automotive Applications of numerical simulation to the analysis of bulk- sheet-metal parts, 145 forming processes—case studies, 56 Concurrent design and manufacturing of aircraft torque tubes, 151 Constitutive equation FCD450 The influence of the constitutive equation on the simulation of a hot Joining of spheroidal graphite cast iron to stainless steel by impact- rolling process, 100 electric current discharge joining, 300 Elsevier B.V. doi: 10.1016/S0924-0136(04)00809-X Subject Index of Volume 150 FE analysis Hot rolling Hydroforming-applications of coherent FE-simulations to the Computational modeling of phase transformations and mechanical development of products and processes, 18 properties during the cooling of hot roiled rod, 107 FE modelling Hydrodynamic deep drawing 3D FE modelling of the cutting of Inconel 718, 116 Key technologies of the simulation of the hydrodynamic deep FE simulation drawing of irregular parts, 40 Innovative sheet metal forming processes: numerical simulations Hydroforming and experimental tests, 2 Innovative sheet metal forming processes: numerical simulations Pressurising materials and process design considerations of the and experimental tests, 2 pressure-assisted injection forging of thick-walled tubular com- Hydroforming-applications of coherent FE-simulations to the ponents, 30 development of products and processes, 18 Key technologies of the simulation of the hydrodynamic deep Simulation of some cases of hydroforming and viscous pressure drawing of irregular parts, 40 forming, 25 Analysis of laser-heating methods for micro-parts stamping applications, 84 Impact energy FE simulation for concurrent design and manufacture of automotive Joining of spheroidal graphite cast iron to stainless steel by impact- sheet-metal parts, 145 electric current discharge joining, 300 Framework of an integrated tolerance synthesis model and using FE Injection molding simulation as a virtual tool for tolerance allocation in assembly Development of an integrated knowledge-based system for mold- design, 182 base design, 194 Feature section Instability of pressurized tubes Deformation characteristic of the precision forging of a blade with a Characterizing steel tube for hydroforming applications, 280 damper platform using 3D FEM analysis, 290 Inverse identification FEM Three-dimensional modeling and simulation of superplastic form- Prediction and control of part distortion during the hot extrusion of ing, 76 titanium alloys, 70 Prediction of chip morphology and segmentation during the Joining machining of titanium alloys, 124 Joining of spheroidal graphite cast iron to stainless steel by impact- FE-modelling electric current discharge joining, 300 Accurate friction and heat transfer laws for enhanced simulation models of precision forging processes, 92 Knowledge-based system Finite element Development of an integrated knowledge-based system for mold- Alternative die designs in net-shape forging of gears, 48 base design, 194 Finite element analysis Single-patch surfaces for tool shape design and finite element Laminated object manufacturing analysis of hot extrusion, 62 Study of the key technologies of LOM for functional metal parts, Finite element method 175 The influence of the constitutive equation on the simulation of a hot Laser heating rolling process, 100 Analysis of laser-heating methods for micro-parts stamping appli- Finite element simulation of the dynamical behavior of a speed- cations, 84 increase gearbox, 170 Gas detonation forming process and modeling for efficient spring- back prediction, 270 Mathematical modeling Friction law Microstructure and solidification thermal parameters in thin strip Accurate friction and heat transfer laws for enhanced simulation continuous casting of a stainless steel, 255 models of precision forging processes, 92 Measurement A simplified reflow soldering process model, 134 Gear forging Metal/mold heat transfer coefficient Alternative die designs in net-shape forging of gears, 48 Microstructure and solidification thermal parameters in thin strip Gearbox continuous casting of a stainless steel, 255 Finite element simulation of the dynamical behavior of a speed- Microanalysis increase gearbox, 170 Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich Hard turning alloys, 208 Effect of tool nose radius and tool wear on residual stress distribu- Micro-forming tion in hard turning of bearing steel, 234 Analysis of laser-heating methods for micro-parts stamping appli- Heat transfer law cations, 84 Accurate friction and heat transfer laws for enhanced simulation Microstructural evolution models of precision forging processes, 92 Computational modeling of phase transformations and mechanical Hot extrusion properties during the cooling of hot rolled rod, 107 Single-patch surfaces for tool shape design and finite element Microstructure analysis of hot extrusion, 62 The influence of the constitutive equation on the simulation of a hot Prediction and control of part distortion during the hot extrusion of rolling process, 100 titanium alloys, 70 Microstructure and solidification thermal parameters in thin strip Hot forging continuous casting of a stainless steel, 255 Parametric classification based on technico-economic approaches Mold-base design to optimize the design and manufacturing of hot forged parts, Development of an integrated knowledge-based system for mold- 223 base design, 194 320 Subject Index of Volume 150 Multistage processes Residual stress Investigation of factors which cause breakage during the hydro- Effect of tool nose radius and tool wear on residual stress distribu- forming of an automotive part, 10 tion in hard turning of bearing steel, 234 The temperature and stress fields developing in rolls during hot Net-shape rolling, 263 Alternative die designs in net-shape forging of gears, 48 Residual stresses in tubes NiTi coating Characterizing steel tube for hydroforming applications, 280 Drilling of X2CrNi 19 11 stainless steel with hiped NiTi coating, Roll 309 The temperature and stress fields developing in rolls during hot Nose radius rolling, 263 Effect of tool nose radius and tool wear on residual stress distribu- Rolling tion in hard turning of bearing steel, 234 The influence of the constitutive equation on the simulation of a hot Numerical simulation rolling process, 100 Applications of numerical simulation to the analysis of bulk- Rotary forging forming processes—case studies, 56 Applications of numerical simulation to the analysis of bulk- An industrial example of FE supported development of a new forming processes—case studies, 56 product, 163 Sand moulding Parametric classification Some demands on rapid prototypes used as master patterns in rapid Parametric classification based on technico-economic approaches tooling for injection moulding, 201 to optimize the design and manufacturing of hot forged parts, Semicircular corrugated web 223 Bending behaviour of corrugated web beams, 242 Part distortion Sheet forming Framework of an integrated tolerance synthesis model and using FE Key technologies of the simulation of the hydrodynamic deep simulation as a virtual tool for tolerance allocation in assembly drawing of irregular parts, 40 design, 182 FE simulation for concurrent design and manufacture of automotive Phase transformation sheet-metal parts, 145 Computational modeling of phase transformations and mechanical Sheet metal properties during the cooling of hot rolled rod, 107 Study of the key technologies of LOM for functional metal parts, Plate deflection 175 Slab analysis of asymmetrical sheet rolling, 215 Sheet metal forming Polymers Innovative sheet metal forming processes: numerical simulations Pressurising materials and process design considerations of the and experimental tests, 2 pressure-assisted injection forging of thick-walled tubular com- An industrial example of FE supported development of a new ponents, 30 product, 163 Precision forging Silicone moulding Accurate friction and heat transfer laws for enhanced simulation Some demands on rapid prototypes used as master patterns in rapid models of precision forging processes, 92 tooling for injection moulding, 201 Deformation characteristic of the precision forging of a blade with a Simulation damper platform using 3D FEM analysis, 290 Simulation of some cases of hydroforming and viscous pressure Pressure distributions forming, 25 | Slab analysis of asymmetrical sheet rolling, 215 Single-patch surfaces Pressure-assisted forming Single-patch surfaces for tool shape design and finite element Pressurising materials and process design considerations of the analysis of hot extrusion, 62 pressure-assisted injection forging of thick-walled tubular com- Slab method ponents, 30 Slab analysis of asymmetrical sheet rolling, 215 Process modelling Spinning A simplified reflow soldering process model, 134 Innovative sheet metal forming processes: numerical simulations Product re-engineering and experimental tests, 2 Concurrent design and manufacturing of aircraft torque tubes, Spring-back prediction 151 Gas detonation forming process and modeling for efficient spring- back prediction, 270 Quantitative selection Stainless steel Parametric classification based on technico-economic approaches Drilling of X2CrNi 19 11 stainless steel with hiped NiTi coating, to optimize the design and manufacturing of hot forged parts, 309 223 Stamping Analysis of laser-heating methods for micro-parts stamping appli- Rapid prototyping cations, 84 Concurrent design and manufacturing of aircraft torque tubes, Static explicit FEM 151 Investigation of factors which cause breakage during the hydro- Some demands on rapid prototypes used as master patterns in rapid forming of an automotive part, 10 tooling for injection moulding, 201 Steel tubes Rapid tooling Characterizing steel tube for hydroforming applications, Some demands on rapid prototypes used as master patterns in rapid 280 tooling for injection moulding, 201 Strain path Reflow soldering Investigation of factors which cause breakage during the hydro- A simplified reflow soldering process model, 134 forming of an automotive part, 10 Subject Index of Volume 150 The influence of the constitutive equation on the simulation of a hot Tool shape design rolling process, 100 Single-patch surfaces for tool shape design and finite element Superplastic forming analysis of hot extrusion, 62 Three-dimensional modeling and simulation of superplastic form- Tube hydroforming ing, 76 Investigation of factors which cause breakage during the hydro- SUS304 forming of an automotive part, 10 Joining of spheroidal graphite cast iron to stainless steel by impact- Tubemaking electric current discharge joining, 300 Characterizing steel tube for hydroforming applications, 280 Tubular components Technico-economic approaches Pressurising materials and process design considerations of the Parametric classification based on technico-economic approaches pressure-assisted injection forging of thick-walled tubular com- to optimize the design and manufacturing of hot forged parts, ponents, 30 pa Twin-roll Temperature Microstructure and solidification thermal parameters in thin strip A simplified reflow soldering process model, 134 continuous casting of a stainless steel, 255 Temperature field The temperature and stress fields developing in rolls during hot Virtual prototyping rolling, 263 Concurrent design and manufacturing of aircraft torque tubes, Three-dimensional finite element method 151 Three-dimensional modeling and simulation of superplastic form- Viscous pressure forming ing, 76 Simulation of some cases of hydroforming and viscous pressure Titanium alloys forming, 25 Prediction and control of part distortion during the hot extrusion of titanium alloys, 70 Weight reduction Titanium machining Bending behaviour of corrugated web beams, 242 Prediction of chip morphology and segmentation during the Weld line machining of titanium alloys, 124 Investigation of factors which cause breakage during the hydro- Tolerance synthesis forming of an automotive part, 10 Framework of an integrated tolerance synthesis model and using FE Welding simulation as a virtual tool for tolerance allocation in assembly Study of the key technologies of LOM for functional metal parts, design, 182 175