Journal of Materials Processing Technology 2002: Vol 124 Index

7 Pages·2002·2.1 MB·English

Journal of
Materials
Processing
Technology
Journal of Materials Processing Technology 124 (2002) 396
www.elsevier.com/locate/jmatprotec
Author Index of Volume 124
Abdalla, H., 183 Hejazi, J., 345 Pellegrino, A., 32
Abdel-Rahman, M., 144 Hodgson, P.D., 329 Pospiech, J., 120
Abo-Elkhier, M., 77 Hsu (Xu Zuyao), T.Y., 260 Prendergast, P.J., 284
Aguilar, M.T.P., 384 Hsu, Y.-C., 67 Prina Mello, A., 284
Ahn, J.H., 267 Huang, Y.D., 216
Aksoy, M., 113 Quigley, E., 360
Al-Habaibeh, A., 372 Im, Y.-T., 366
Al-Hamdan, A., 83 loi, T., 255 Rajadurai, A., 297
Rakic¢, R., 25
Balo, §.N., 200 Janovec, J., 293
Rakic, Z., 25
Bamford, J., 311 Jung, Y.J., 49
Ramakrishnan, N., 353
Bangwei, Z., 8
Ramalingam, S.C., 178
Kang, C.G., 49
Barash, M.M., 274
Ramulu, M., 244
Kang, S.S., 36
Barati, M., 166
Rao, P.N., 244
Kao, H., 244
Barber, G.C., 178
Rao, P.V.M., 133
Kashyap, B.P., 259
Bari, M.A., 284
Ruan, X.Y., 260
Brophy, B., 305 Kato, K., 255
Brinig, H., 160 Kelly, K., 305
Saidi, A., 166
Byrne, G., 305 Kevin Chou, Y., 171, 274
Santhanam, S., 192
Kim, H.Y., 267
Satyanarayana, K.G., 297
Cetlin, P.R., 384 Kim, S.H., 267
Schambergerova, J., 293
Ceylan, M., 200 Kravtsov, A.G., 160
Shabestari, S., 345
Chang, H.B., 260 Kuo, H.-C., 389
Shah, S.V., 105
Chen, G., 178 Kuzucu, V., 113
Shahverdi, H.R., 345
Chen, Y.-H., 19 Kwon, H.C., 49
Shi, J., 227
Choi, S., 329
Corréa, E.C.S., 384 Lee, S., 19 Sosnowski, W., 319
Cotterell, M., 153, 293 Lee, Y., 329 Southern, W.R., 261
Liu, J.T., 260 Srinivasan, N., 353
Dahotre, N.B., 105 Liu, X., 255 Swamy, N., 353
Dhande, S.G., 133 Lyons, C.G., 261
Domanti, S.A., 227 Takata, S., 267
Donnarumma, A., 32 MacDonald, B.J., 92 Tiernan, S., 126
Dzan, W.-Y., 389 Mansour, A., 183 Tosun, N., 99
Marczewska, I., 319 Turhan, H., 113
Edwards, G.R., 337 Marczewski, A., 319 Tzeng, Y.-F., 1
El-Abden, S.Z., 144 Marya, M., 337
Enomoto, S., 255 McElwain, D.L.S., 227 Venugopal Rao, A., 353
Evans, C.J., 274 Mohamed, F.A., 144
Mohan, B., 297
Wang, J.-Y., 19
Fahy, M., 126 Monaghan, J., 360
Wong, S.V., 57
Froyen, L., 216
Wu, C.-Y., 67
Nabhani, F., 311
Wu, R.H., 260
Gao, H., 178 Nageswara Rao, B., 259
Ge, C.L., 14 Narayana Murty, S.V.S., 259
Ghomashchi, M.R., 345 Ye, R.C., 14
Gindy, N., 372 O’ Sullivan, D., 153
Ozler, L., 99 Zhandarov, S.F., 160
Hamouda, A.M.S., 57, 209, 238 Zhou, L., 255
Han, K.-H., 366 Pappalardo, M., 32 Ziegelheim, J., 293
Haowen, X., 8 Park, D.H., 36 Zorriassatine, F., 372
Elsevier Science B.V.
PII: S0924-0136(02)00478-8
Journal of
Materials
Processing
Technology
Journal of Materials Processing Technology 124 (2002) 397-401
www.elsevier.com/locate/jmatprotec
Subject Index of Volume 124
Aircraft structures Burr minimizing
A computational and experimental analysis of high energy impact Burr reduction with a fine-scrape cutter, 255
to sheet metal aircraft structures, 92 Burr technology
Burr reduction with a fine-scrape cutter, 255
Drilling of (Al,03)p/6061 metal matrix composites, 244
Al-SiC Cell biomechanics
Effect of SiC and rotation of electrode on electric discharge A comparison of excimer laser etching and dry etching process for
machining of Al-SiC composite, 297 surface fabrication of biomaterials, 284
Aluminides Ceramics
Microstructural analysis of interfacial reaction between molten An improved model for the disking process, 192
aluminium and solid iron, 345 Clad composite material
Aluminum Finite element simulation of die design for hot extrusion process
Finishing of non-ferrous internal surfaces using ballizing technique, of Al/Cu clad composite and its experimental investigation,
144 49
Aluminum die casting CO, laser
Laser surface-engineered vanadium carbide coating for extended Effects of process parameters on the corrosion rate of pulsed
die life, 105 Nd:YAG laser-welded zinc-coated steel, 1
Amorphous forming region Combustion synthesis
Effects of preparation technology on the structure and amorphous Production of (W, Ti)C reinforced Ni—-Ti matrix composites, 166
forming region for electroless Ni-P alloys, 8 Composite coating
ANN Laser surface-engineered vanadium carbide coating for extended
A study of tool life in hot machining using artificial neural networks die life, 105
and regression analysis method, 99 Computational simulation
Asperities A flexible surface tooling for sheet-forming processes: conceptual
Some surface profiles of a strip after plane-strain indentation by studies and numerical simulation, 133
rigid bodies with serrated surfaces, 227 Condition monitoring system design
Asymmetrical cold rolling Comprehensive experimental evaluation of a systematic approach
Analysis of asymmetrical cold rolling with varying coefficients of for cost effective and rapid design of condition monitoring
friction, 178 systems using Taguchi’s method, 372
Austenite Core material
Important factors to obtain homogeneous and ultrafine ferrite— Finite element simulation of die design for hot extrusion process
pearlite microstructure in low carbon steel, 216 of Al/Cu clad composite and its experimental investigation,
Austenitic stainless steel 49
Machinability of austenitic stainless steel SS303, 153 Corona discharge
Austenitic—martensitic transformation Analysis of the polarization state of melt-spun polypropylene
Effect of Be content on some characteristics of Cu-Al—Be shape fibers, 160
memory alloys, 200 Corrosion
Average peak power density Effects of process parameters on the corrosion rate of pulsed
Effects of process parameters on the corrosion rate of pulsed Nd:YAG laser-welded zinc-coated steel, |
Nd:YAG laser-welded zinc-coated steel, 1 Cracks
Axiomatic design An improved model for the disking process, 192
Measure of independence in soft design, 32 Cross loading
AZ31 A comparative study of microstructures and mechanical properties
Isothermal sheet formability of magnesium alloy AZ31 and AZ61, 19 obtained by bar and plate rolling, 329
Cubic boron nitride
Ball-shaped tools Experimental investigation on CBN turning of hardened AISI
Finishing of non-ferrous internal surfaces using ballizing technique, 52100 steel, 274
144 Cutting
Bar rolling An improved model for the disking process, 192
A comparative study of microstructures and mechanical properties Cutting forces
obtained by bar and plate rolling, 329 Effect of misalignment on the cutting force signature in drilling, 83
Biomaterials Cu-—Zn brass
A comparison of excimer laser etching and dry etching process for The effect of tension/torsion strain path changes on the work
surface fabrication of biomaterials, 284 hardening of Cu—Zn brass, 384
Elsevier Science B.V.
PII: S0924-0136(02)00479-X
398 Subject Index of Volume 124
Deep-drawing characteristics Elliptical shape
Dependence of micro-hardness on deformation of deep-drawing Application of computer-aided process planning system for non-
steel sheets, 293 axisymmetric deep drawing products, 36
Deep-drawing steel sheets End milling
Dependence of micro-hardness on deformation of deep-drawing Surface roughness model for end milling: a semi-free cutting
steel sheets, 293 carbon casehardening steel (EN32) in dry condition, 183
Deep-hole machining Comprehensive experimental evaluation of a systematic approach
Effect of misalignment on the cutting force signature in drilling, for cost effective and rapid design of condition monitoring
83 systems using Taguchi’s method, 372
Depth of penetration Energy losses
Finishing of non-ferrous internal surfaces using ballizing technique, Effect of energy losses during an impact event on the dynamic flow
144 stress, 209
Design of experiments EN32M
Surface roughness model for end milling: a semi-free cutting Surface roughness model for end milling: a _ semi-free
carbon casehardening steel (EN32) in dry condition, 183 cutting carbon casehardening steel (EN32) in dry condition,
Die shape 183
The influence of die shape on the flow deformation of extrusion Entropy
forging, 67 Measure of independence in soft design, 32
Differential geometry Equiaxed subgrain
The analysis of NC machining efficiency for marine propellers, A comparative study of microstructures and mechanical properties
389 obtained by bar and plate rolling, 329
Differential scanning calorimeter Eutectic structure
Effect of Be content on some characteristics of Cu-Al—Be shape Research on self-propagating eutectic boriding, 14
memory alloys, 200 Extrusion
Diffusion Finite element simulation of die design for hot extrusion process
Microstructural analysis of interfacial reaction between molten of Al/Cu clad composite and its experimental investigation,
aluminium and solid iron, 345 49
Dimensionless variables Extrusion forging
An analytical model for the optimization of the laser bending of The influence of die shape on the flow deformation of extrusion
titanium Ti-6Al—2Sn-4Zr—2Mo, 337 forging, 67
Disking
An improved model for the disking process, 192 FEA
Dissolution Dynamic FEA modelling of ISO tank containers, 126
Microstructural analysis of interfacial reaction between molten Feed
aluminium and solid iron, 345 Finishing of non-ferrous internal surfaces using ballizing technique,
Drill wear 144
Real-time drill wear estimation based on spindle motor power, 267 Ferrite
Drill wear estimation Important factors to obtain homogeneous and ultrafine ferrite—
Real-time drill wear estimation based on spindle motor power, 267 pearlite microstructure in low carbon steel, 216
Drilling Fiber orientation
Effect of misalignment on the cutting force signature in drilling, Numerical simulation of three-dimensional fiber orientation in
83 short-fiber-reinforced injection-molded parts, 366
Al-based condition monitoring of the drilling process, 305 Fine-scrape cutter
Dynamic compression test Burr reduction with a fine-scrape cutter, 255
Effect of energy losses during an impact event on the dynamic flow Finishing
stress, 209 Finishing of non-ferrous internal surfaces using ballizing technique,
Dynamic impact test 144
Dynamic FEA modelling of ISO tank containers, 126 Finite element analysis
Dynamic materials modelling A computational and experimental analysis of high energy impact
CAE for forging of titanium alloy aero-engine disc and integration to sheet metal aircraft structures, 92
with CAD-CAM for fabrication of the dies, 353 CAE for forging of titanium alloy aero-engine disc and integration
with CAD-CAM for fabrication of the dies, 353
Electret effect The finite element modelling of conventional spinning using multi-
Analysis of the polarization state of melt-spun polypropylene domain models, 360
fibers, 160 Finite element method
Electric discharge machining The influence of die shape on the flow deformation of extrusion
Effect of SiC and rotation of electrode on electric discharge forging, 67
machining of Al-SiC composite, 297 Finite element modeling
Electrization A modified method for lateral spread in thin strip rolling, 77
Analysis of the polarization state of melt-spun polypropylene Finite-element program
fibers, 160 Numerical simulation of three-dimensional fiber orientation in
Electrochemical short-fiber-reinforced injection-molded parts, 366
Effects of process parameters on the corrosion rate of pulsed Flexible surface tooling
Nd:YAG laser-welded zinc-coated steel, | A flexible surface tooling for sheet-forming processes: conceptual
Electroless Ni-P alloys studies and numerical simulation, 133
Effects of preparation technology on the structure and amorphous Fracture
forming region for electroless Ni-P alloys, 8 An improved model for the disking process, 192
Subject Index of Volume 124
Frictional coefficient ratio Liquid metal corrosion
Analysis of asymmetrical cold rolling with varying coefficients of Laser surface-engineered vanadium carbide coating for extended
friction, 178 die life, 105
Fuzzy expert system Loading path
A fuzzy logic based expert system for machinability data-on- A comparative study of microstructures and mechanical properties
demand on the Internet, 57 obtained by bar and plate rolling, 329
Low carbon steel
Gaussian curvature Important factors to obtain homogeneous and ultrafine ferrite—
The analysis of NC machining efficiency for marine propellers, pearlite microstructure in low carbon steel, 216
389
Machinability data selection
H13 steel A fuzzy logic based expert system for machinability data-on-
Laser surface-engineered vanadium carbide coating for extended demand on the Internet, 57
die life, 105 Machinability rating
Hard turning Machinability of austenitic stainless steel SS303, 153
Experimental investigation on CBN turning of hardened AISI Machining
52100 steel, 274 Surface hardening of AISI 4340 steel by machining: a preliminary
Heat flow investigation, 171
An analytical model for the optimization of the laser bending of Machining data
titanium Ti-6Al—2Sn-4Zr—2Mo, 337 A fuzzy logic based expert system for machinability data-on-
High manganese steel demand on the Internet, 57
A study of tool life in hot machining using artificial neural networks Manufacturing
and regression analysis method, 99 An improved model for the disking process, 192
High-speed milling MaxEnt
Burr reduction with a fine-scrape cutter, 255 Measure of independence in soft design, 32
High-temperature oxidation Mechanical properties
Laser surface-engineered vanadium carbide coating for extended A note on the effect of phosphorus on the microstructure and
die life, 105 mechanical properties of leaded-tin bronze, 113
Hip protector Mechanical testing
Mechanical testing of hip protectors, 311 Mechanical testing of hip protectors, 311
Hot machining Melt-spun fibers
A study of tool life in hot machining using artificial neural networks Analysis of the polarization state of melt-spun polypropylene
and regression analysis method, 99 fibers, 160
Metal cutting
Image processing Effect of misalignment on the cutting force signature in drilling, 83
Effect of misalignment on the cutting force signature in drilling, 83 Metal flow
Impact The influence of die shape on the flow deformation of extrusion
A computational and experimental analysis of high energy impact forging, 67
to sheet metal aircraft structures, 92 Metal matrix composite
Impact forces Effect of SiC and rotation of electrode on electric discharge
Mechanical testing of hip protectors, 311 machining of Al-SiC composite, 297
Intelligent Metal spinning
Al-based condition monitoring of the drilling process, 305 The finite element modelling of conventional spinning using multi-
Intermetallics domain models, 360
Microstructural analysis of interfacial reaction between molten Metalworking fluid
aluminium and solid iron, 345 Tribological aspects of the choice of metalworking fluid in cutting
Internal surfaces processes, 25
Finishing of non-ferrous internal surfaces using ballizing technique, Micro-hardness
144 Dependence of micro-hardness on deformation of deep-drawing
ISO tank containers steel sheets, 293
Dynamic FEA modelling of ISO tank containers, 126 Micromanufacturing
Isothermal sheet forming A comparison of excimer laser etching and dry etching process for
Isothermal sheet formability of magnesium alloy AZ31 and AZ61, surface fabrication of biomaterials, 284
19 Microstructure
A note on the effect of phosphorus on the microstructure and
Large deformation mechanical properties of leaded-tin bronze, 113
CAE for forging of titanium alloy aero-engine disc and integration Microstructural analysis of interfacial reaction between molten
with CAD-CAM for fabrication of the dies, 353 aluminium and solid iron, 345
Laser bending Microtextured
An analytical model for the optimization of the laser bending of A comparison of excimer laser etching and dry etching process for
titanium Ti-6Al—2Sn-4Zr—2Mo, 337 surface fabrication of biomaterials, 284
Laser surface engineering Miedema model
Laser surface-engineered vanadium carbide coating for extended Effects of preparation technology on the structure and amorphous
die life, 105 forming region for electroless Ni-P alloys, 8
Leaded-tin bronze Milling machine
A note on the effect of phosphorus on the microstructure and Tribological aspects of the choice of metalworking fluid in cutting
mechanical properties of leaded-tin bronze, 113 processes, 25
400 Subject Index of Volume 124
Misalignment Pulse energy
Effect of misalignment on the cutting force signature in drilling, 83 Effects of process parameters on the corrosion rate of pulsed
Monitoring Nd:YAG laser-welded zinc-coated steel, 1
Al-based condition monitoring of the drilling process, 305 Punch-die pressing
Isothermal sheet formability of magnesium alloy AZ31 and AZ61,
NaCl 19
Effects of process parameters on the corrosion rate of pulsed
Nd:YAG laser-welded zinc-coated steel, | Regression analysis
Nanobiotechnology A study of tool life in hot machining using artificial neural networks
A comparison of excimer laser etching and dry etching process for and regression analysis method, 99
surface fabrication of biomaterials, 284 Relative humidity
Nd:YAG laser The influence of humidity on the deformation and fracture beha-
Effects of process parameters on the corrosion rate of pulsed viour of PMMA, 238
Nd:YAG laser-welded zinc-coated steel, 1 Remote centre compliant devices
Neural networks The study of a passive accommodation device in robotic insertion
Comprehensive experimental evaluation of a systematic approach processes, 261
for cost effective and rapid design of condition monitoring Response surface methodology
systems using Taguchi’s method, 372 Surface roughness model for end milling: a semi-free cutting
carbon casehardening steel (EN32) in dry condition, 183
ODF Robotics
Numerical simulation of three-dimensional fiber orientation in The study of a passive accommodation device in robotic insertion
short-fiber-reinforced injection-molded parts, 366 processes, 261
Optimization Roll pass analysis
Sensitivity based optimization of sheet metal forming tools, 319 Method of planning draughts for a cold-rolled strip, 120
An analytical model for the optimization of the laser bending of Rotation of electrode
titanium Ti-6Al—2Sn—-4Zr—2Mo, 337 Effect of SiC and rotation of electrode on electric discharge
machining of Al-SiC composite, 297
Parallel processing Rubber-like material
The finite element modelling of conventional spinning using multi- A flexible surface tooling for sheet-forming processes: conceptual
domain models, 360 studies and numerical simulation, 133
Part assembly
The study of a passive accommodation device in robotic insertion Scanning electron microscopy
processes, 261 Drilling of (Al,03)p/6061 metal matrix composites, 244
Path interval Self-propagating eutectic boriding
The analysis of NC machining efficiency for marine propellers, 389 Research on self-propagating eutectic boriding, 14
Phase transformation Sensitivity
Surface hardening of AISI 4340 steel by machining: a preliminary Sensitivity based optimization of sheet metal forming tools,
investigation, 171 319
Planar anisotropy Sensory fusion
A modified method for lateral spread in thin strip rolling, 77 Comprehensive experimental evaluation of a systematic approach
Polarisation for cost effective and rapid design of condition monitoring
Effects of process parameters on the corrosion rate of pulsed systems using Taguchi’s method, 372
Nd:YAG laser-welded zinc-coated steel, | Shape memory properties
Poly(methylmethacrylate) Effect of Be content on some characteristics of Cu-Al—Be shape
The influence of humidity on the deformation and fracture beha- memory alloys, 200
viour of PMMA, 238 Sheath material
Polycrystalline diamond Finite element simulation of die design for hot extrusion process
Drilling of (Al203)p/6061 metal matrix composites, 244 of Al/Cu clad composite and its experimental investigation,
Preform 49
Application of computer-aided process planning system for non- Sheet metal forming
axisymmetric deep drawing products, 36 Sensitivity based optimization of sheet metal forming tools,
Preparation technology 319
Effects of preparation technology on the structure and amorphous Sheet-forming processes
forming region for electroless Ni-P alloys, 8 A flexible surface tooling for sheet-forming processes: conceptual
Pressure side studies and numerical simulation, 133
The analysis of NC machining efficiency for marine propellers, 389 SHS
Process control Production of (W, Ti)C reinforced Ni-Ti matrix composites, 166
Method of planning draughts for a cold-rolled strip, 120 Slab method
Process plan Analysis of asymmetrical cold rolling with varying coefficients of
Application of computer-aided process planning system for non- friction, 178
axisymmetric deep drawing products, 36 Slip line theory
Production rules Some surface profiles of a strip after plane-strain indentation by
Application of computer-aided process planning system for non- rigid bodies with serrated surfaces, 227
axisymmetric deep drawing products, 36 Soft Computing
Pulse duration Measure of independence in soft design, 32
Effects of process parameters on the corrosion rate of pulsed Soft design
Nd:YAG laser-welded zinc-coated steel, 1 Measure of independence in soft design, 32
Subject Index of Volume 124
Software Thermally stimulated current
Method of planning draughts for a cold-rolled strip, 120 Analysis of the polarization state of melt-spun polypropylene
Speed fibers, 160
Finishing of non-ferrous internal surfaces using ballizing technique, Thermite
144 Research on self-propagating eutectic boriding, 14
Spindle motor power Thermomechanical process
Real-time drill wear estimation based on spindle motor power, 267 Surface hardening of AISI 4340 steel by machining: a preliminary
Spontaneous polarization investigation, 171
Analysis of the polarization state of melt-spun polypropylene (Ti, W)C composites
fibers, 160 Production of (W, Ti)C reinforced Ni—Ti matrix composites, 166
Spot size Titanium
Effects of process parameters on the corrosion rate of pulsed An analytical model for the optimization of the laser bending of
Nd:YAG laser-welded zinc-coated steel, 1 titanium Ti-6Al—2Sn-4Zr-2Mo, 337
Spread rolling Titanium alloy
A modified method for lateral spread in thin strip rolling, 77 CAE for forging of titanium alloy aero-engine disc and integration
Step-over distance with CAD-CAM for fabrication of the dies, 353
The analysis of NC machining efficiency for marine propellers, 389 Titanium carbide
Strain path Production of (W, Ti)C reinforced Ni-Ti matrix composites, 166
The effect of tension/torsion strain path changes on the work Tool life
hardening of Cu—Zn brass, 384 A study of tool life in hot machining using artificial neural networks
Strain-assisted transformation and regression analysis method, 99
Important factors to obtain homogeneous and ultrafine ferrite— Tool wear
pearlite microstructure in low carbon steel, 216 Experimental investigation on CBN turning of hardened AISI
Stress—strain 52100 steel, 274
Effect of energy losses during an impact event on the dynamic flow Tools design
stress, 209 Sensitivity based optimization of sheet metal forming tools, 319
Strip rolling Tribological aspects
Method of planning draughts for a cold-rolled strip, 120 Tribological aspects of the choice of metalworking fluid in cutting
Structure processes, 25
Effects of preparation technology on the structure and amorphous Turbine disc forging
forming region for electroless Ni-P alloys, 8 CAE for forging of titanium alloy aero-engine disc and integration
Surface hardening with CAD-CAM for fabrication of the dies, 353
Surface hardening of AISI 4340 steel by machining: a preliminary
investigation, 171 Ultrafine-grained microstructure
Surface roughness Important factors to obtain homogeneous and ultrafine ferrite—
Finishing of non-ferrous internal surfaces using ballizing technique, pearlite microstructure in low carbon steel, 216
144 Uncertainty
Surface roughness model for end milling: a semi-free cutting Measure of independence in soft design, 32
carbon casehardening steel (EN32) in dry condition, 183
Wedge cutting
Taguchi’s orthogonal arrays Some surface profiles of a strip after plane-strain indentation by
Comprehensive experimental evaluation of a systematic approach rigid bodies with serrated surfaces, 227
for cost effective and rapid design of condition monitoring Work hardening
systems using Taguchi’s method, 372 Machinability of austenitic stainless steel SS303, 153
Temper rolling The effect of tension/torsion strain path changes on the work
Some surface profiles of a strip after plane-strain indentation by hardening of Cu—Zn brass, 384
rigid bodies with serrated surfaces, 227
Tensile deformation X-ray diffraction
The influence of humidity on the deformation and fracture beha- Effect of Be content on some characteristics of Cu-Al—Be shape
viour of PMMA, 238 memory alloys, 200