Table Of Content

Journal of Materials Processing Technology Journal of Materials Processing Technology 116 (2001) 317 www.elsevier.com/locate/jmatprotec Author Index of Volume 116 Abdullah, A., 16 Jang, D.-H., 309, 310 Ryou, T.-K., 309, 310 Ariffin, A.K., 67 Jawaid, A., 2 Jie, M., 219 Safiullin, R.V., 265 Badini, C., 289 Jin, Z.-H., 176 Sahari, J., 67 Bingyuan, X., 165 Jing’en, Z., 124 Salishchev, G.A., 265 Bramley, A.N., 62 Senkov, O.N., 265 Kaibyshev, O.A., 265 Senthil Kumar, A., 39 Chan, C.L., 16 Khairy, A.B., 77 Sharif, S., 2 Khoo, B.T., 72 Shengqi, X., 124 Chan, E.T.S., 137, 146 Chan, K.C., 231 Koksal, S., 2 Shih, T.-S., 101 Chang, H.B., 211 Suryanarayana, G., 269 La Vecchia, G.M., 289 Chattopadhyay, A.B., 44 Che Haron, C.H., 49, 84 Lau, H., 137 Tang, C.Y., 219 Chen, C.-K., 114 Lee, H.C., 298 Teng, C.-C., 182 Chew, K.C., 72 Lee, W.B., 219 Tsai, M.-J., 194 Chi, X., 95 Li, C.S., 201 Tso, P.-L., 182, 194 Li, S., 91 Li, S.-B., 189 Das, N.S., 278 Valente, T., 289 Lian, J.-C., 235 Deros, B. Md., 84 Valiakhmetov, O.R., 265 Lin, J.C., 170 Dhar, N.R., 44 Venkata Reddy, N., 269 Liu, C., 205 Ding, Y., 22 Venkatesh, V.C., 16 Liu, H.-M., 235 Donglang, C., 124 Vieira, J.M., 244 Liu, J.T., 211 Du, S., 161 Liu, X.H., 201 Wagener, H.W., 55 Lu, W.-P., 205 Ezugwu, E.O., 10, 244 Wan, M., 189 Lu, Z.-L., 176 Wang, G.D., 201 Luo, H., 88 Fanghong, S., 165 Wang, L., 88 Luo, Y., 91 Wang, S.H., 231 Fauziah, M., 84 Lutfullin, R.Y., 265 Wang, Y.-Y., 194 Fino, P., 289 Wendenburg, A., 55 Froes, F.H., 265 Machado, A.R., 244 Wu, C.-T., 114 Maity, K.P., 278 Wu, R.H., 211 Galeyev, R.M., 265 Ming, C., 165 Wu, S., 224 Ginting, A., 49, 84 Mingliang, M., 124 Goh, J.H., 49 Muhamad, N., 67 Gung, C.-H., 101 Xiang, Y., 224 Xiaotian, L., 165 Noordin, M.Y., 16 Hambli, R., 252 Xinkuan, L., 124 Han, J., 161 Okeke, C.I., 10 Xu, J.Z., 201 Han, Z.-W., 205 Ourdjini, A., 72 Haojun, M., 95 Yang, M.Y., 298 He, X., 161 Paul, S., 44 Yang, S.-C., 128 He, X.M., 201 Paulo Davim, J., 305 Yang, Y.-Y., 189 Heath, P.J., 31 Peng, Y., 235 Yinghong, P., 95 Hong, S.Y., 22 Prakash, J.R.S., 39 Yoon, D.-Y., 309, 310 Hsu, T.Y., 211 Yucheng, X., 165 Hu, Y., 91 Rahman, M., 39 Hwang, B.-B., 309, 310 Rahman, Md.M., 67 Zhang, C., 88 Hwang, L.-R., 101 Rao, Q.-C., 176 Zhang, Y., 161 Ren, L.-Q., 205 Zhen, Z., 95 Ip, R.W.L., 137 Ruan, X.Y., 211 Zhou, Y.-X., 176 Elsevier Science B.V. PII: S0924-0136(01)01172-4 Journal of Materials Processing Technology Journal of Materials Processing Technology 116 (2001) 318-322 www.elsevier.com/locate/jmatprotec Subject Index of Volume 116 Abductive neural network Chip breaking Free-form surface rebuild using an abductive neural network, 170 Micro-temperature manipulation in cryogenic machining of low Abrasive wear behavior carbon steel, 22 An investigation of the abrasive wear behavior of ductile cast iron, Chip strain 176 Performance evaluation of cemented carbide tools in turning AISI Aluminium-matrix composite 1010 steel, 16 Forging of 2124/SiC,, composite: preliminary studies of the effects Coated and uncoated carbide tools on microstructure and strength, 289 Cutting performance and wear characteristics of PVD coated and Analysis of variance (ANOVA) uncoated carbide tools in face milling Inconel 718 aerospace A note on the determination of optimal cutting conditions for alloy, 2 surface finish obtained in turning using design of experiments, Coating 305 The effect of a coating on the springback of integrated circuit Analysis system leadframes, 231 Analysis system. Prerequisite for automation in metal-forming Cold rolling mills technology, 55 A set-up model for tandem cold rolling mills, 269 Analytic hierarchy process Cold strip rolling Integration of expert system with analytic hierarchy process for the Third-power spline function strip element method and its simula- design of material handling equipment selection system, 137 tion of the three-dimensional stresses and deformations of cold Artificial neural network strip rolling, 235 Prediction of the flow stress of 0.4C—1.9Cr—1.5Mn-—1.0Ni-0.2Mo Comb cracking steel during hot deformation, 211 Performance of cutting fluids during face milling of steels, 244 Aspherical lens Combustion reduction reaction Local material removal mechanism considering curvature effect in Effect of material characteristics on the ignition of the combustion the polishing process of the small aspherical lens die, 298 reactions induced by ball milling, 124 Axisymmetrical part Combustion synthesis Computer simulation of the rheological forming of an axisymme- Combustion synthesis of hexagonal boron—nitride-based ceramics, trical part at room temperature, 91 161 Computer simulation Back propagation Computer simulation of the rheological forming of an axisymme- Prediction of the flow stress of 0.4C—1.9Cr—1.5Mn—1.0Ni—0.2Mo trical part at room temperature, 91 steel during hot deformation, 211 Control Blackboard model Formation and control of strip scale pores in hot rolling, 201 Research on hybrid expert system application to blanking technol- Coulomb friction ogy,9 5 A class of slipline field solutions for metal machining with Blanking technology Coulomb friction at the chip—tool interface, 278 Research on hybrid expert system application to blanking technol- Cryogenic cooling ogy,9 5 Beneficial effects of cryogenic cooling over dry and wet machining Burnishing process on tool wear and surface finish in turning AISI 1060 steel, Study on the aluminum alloy burnishing processing and the exis- 44 tence of the outstripping phenomenon, 88 Cryogenic machining Micro-temperature manipulation in cryogenic machining of low Carbides carbon steel, 22 Wear of coated and uncoated carbides in turning tool steel, 49 Current Cavity Investigation on the influence of machining parameters when Numerical simulation of cavity damage evolution in superplastic machining tool steel using EDM, 84 bulging process, 224 Cutting fluids Ceramic Performance of cutting fluids during face milling of steels, 244 Combustion synthesis of hexagonal boron—nitride-based ceramics, Cutting force 161 Performance evaluation of cemented carbide tools in turning AISI Channel section with outer edge 1010 steel, 16 The effects of forming parameters in the roll-forming of a channel Micro milling of pure copper, 39 section with an outer edge, 205 Cutting temperature Chemical mechanical polishing Micro-temperature manipulation in cryogenic machining of low A study of carrier motion on a dual-face CMP machine, 194 carbon steel, 22 Elsevier Science B.V. PII: S0924-0136(01)01173-6 Subject Index of Volume 116 Cutting-edge Finite strip method Manufacturing models for the design and NC grinding of a revol- The effects of forming parameters in the roll-forming of a channel ving tool with a circular arc generatrix, 114 section with an outer edge, 205 Finite-element method Damage evolution Computer simulation of the rheological forming of an axisymme- Numerical simulation of cavity damage evolution in superplastic trical part at room temperature, 91 bulging process, 224 Flake-like oxide debris Damage law Tool life and wear mechanisms of TiN coated tools in an inter- Finite element simulation of fine blanking processes using a mittent cutting operation, 10 pressure-dependent damage model, 252 Flank wear Deburring Wear of coated and uncoated carbides in turning tool steel, 49 Aspects of surface and edge finish by magnetoabrasive particles, 77 Flow stress Die pressure Prediction of the flow stress of 0.4C—1.9Cr—1.5Mn-—1.0Ni—0.2Mo Erratum to “The process sequence design of a power-assisted steel during hot deformation, 211 steering part” [J. Mater. Process. Technol. (2001) 87-92], 310 Forging Die steel for plastic mould UBET and TEUBA: fast methods for forging simulation and pre- Prediction of the flow stress of 0.4C—1.9Cr—1.5Mn—1.0Ni—0.2Mo form design, 62 steel during hot deformation, 211 Forging of 2124/SiC, composite: preliminary studies of the effects Different specimens on microstructure and strength, 289 A system for evaluating sheet formability using tensile tests with Formation different shapes of specimens, 189 Formation and control of strip scale pores in hot rolling, 201 Displacement Forming parameters Analysis system. Prerequisite for automation in metal-forming The effects of forming parameters in the roll-forming of a channel technology, 55 section with an outer edge, 205 Ductile cast iron Fracture An investigation of the abrasive wear behavior of ductile cast iron, Finite element simulation of fine blanking processes using a 176 pressure-dependent damage model, 252 Dwell time Free-from surface Local material removal mechanism considering curvature effect in Free-form surface rebuild using an abductive neural network, the polishing process of the small aspherical lens die, 298 170 EDM Gravity casting Investigation on the influence of machining parameters when A study on the qualities of GTA-welded squeeze-cast A356 alloy, machining tool steel using EDM, 84 101 Electrode wear rate Grinding burn Investigation on the influence of machining parameters when Studies on the grinding characteristics of directionally solidified machining tool steel using EDM, 84 nickel-based superalloy, 165 Elliptical polishing area Grinding mechanism Local material removal mechanism considering curvature effect in Studies on the grinding characteristics of directionally solidified the polishing process of the small aspherical lens die, 298 nickel-based superalloy, 165 Envelope theory Grinding ultra-precision substrates Determination of spherical cam profiles by envelope theory, 128 A study of the total thickness variation in the grinding of ultra- Experiment precision substrates, 182 Finite element simulation of fine blanking processes using a GTA-welding pressure-dependent damage model, 252 A study on the qualities of GTA-welded squeeze-cast A356 alloy, Expert system 101 Research on hybrid expert system application to blanking technology,9 5 Integration of expert system with analytic hierarchy process for the Heat-activated combustion reaction design of material handling equipment selection system, 137 Effect of material characteristics on the ignition of the combustion Extrusion reactions induced by ball milling, 124 Erratum to “The process sequence design of a power-assisted Helical flute steering part” [J. Mater. Process. Technol. (2001) 87-92], 310 Manufacturing models for the design and NC grinding of a revolving tool with a circular arc generatrix, 114 Face milling High-energy ball milling Cutting performance and wear characteristics of PVD coated and Effect of material characteristics on the ignition of the combustion uncoated carbide tools in face milling Inconel 718 aerospace reactions induced by ball milling, 124 alloy, 2 Hot formability Performance of cutting fluids during face milling of steels, 244 Forging of 2124/SiC, composite: preliminary studies of the effects Fill rate on microstructure and strength, 289 Effect of kanban size on just-in-time manufacturing systems, 146 Hot rolling Fine blanking Formation and control of strip scale pores in hot rolling, 201 Finite element simulation of fine blanking processes using a Hybrid knowledge representation pressure-dependent damage model, 252 Research on hybrid expert system application to blanking technol- Finite element ogy,9 5 Finite element simulation of fine blanking processes using a Hypocycloid pressure-dependent damage model, 252 A study of carrier motion on a dual-face CMP machine, 194 320 Subject Index of Volume 116 Indentation Microstructure Erratum to “The process sequence design of a power-assisted Development of Ti-6Al-4V sheet with low temperature super- steering part”’ [J. Mater. Process. Technol. (2001) 87-92], 310 plastic properties, 265 Integrated circuit MMC The effect of a coating on the springback of integrated circuit Developments in applications of PCD tooling, 31 leadframes, 231 Multi-layer perceptron Inverse problem Prediction of the flow stress of 0.4C—1.9Cr—1.5Mn-—1.0Ni—0.2Mo Manufacturing models for the design and NC grinding of a revol- steel during hot deformation, 211 ving tool with a circular arc generatrix, 114 NC grinding JIT Manufacturing models for the design and NC grinding of a revol- Effect of kanban size on just-in-time manufacturing systems, 146 ving tool with a circular arc generatrix, 114 Nickel-based materials Kanban Cutting performance and wear characteristics of PVD coated and Effect of kanban size on just-in-time manufacturing systems, 146 uncoated carbide tools in face milling Inconel 718 aerospace alloy, 2 Leadframes Nickel-based superalloy The effect of a coating on the springback of integrated circuit Studies on the grinding characteristics of directionally solidified leadframes, 231 nickel-based superalloy, 165 Liquid nitrogen NiTi fiber Beneficial effects of cryogenic cooling over dry and wet machining Constitutive modeling of aluminum matrix NiTi fiber-reinforced on tool wear and surface finish in turning AISI 1060 steel, 44 smart composite, 219 Local removal rate Numerical simulation Local material removal mechanism considering curvature effect in Numerical simulation of cavity damage evolution in superplastic the polishing process of the small aspherical lens die, 298 bulging process, 224 Low carbon steel Micro-temperature manipulation in cryogenic machining of low One-dimensional model - carbon steel, 22 A set-up model for tandem cold rolling mills, 269 Orthogonal arrays Machining A note on the determination of optimal cutting conditions for Developments in applications of PCD tooling, 31 surface finish obtained in turning using design of experiments, A class of slipline field solutions for metal machining with Cou- 305 lomb friction at the chip—tool interface, 278 Outstripping phenomenon Magnetoabrasive particles Study on the aluminum alloy burnishing processing and the exis- Aspects of surface and edge finish by magnetoabrasive particles, tence of the outstripping phenomenon, 88 77 Manufacturing model Particle settling Manufacturing models for the design and NC grinding of a revol- Settling of silicon carbide particles in cast metal matrix composites, ving tool with a circular arc generatrix, 114 72 Martensitic matrix PCD An investigation of the abrasive wear behavior of ductile cast iron, Developments in applications of PCD tooling, 31 176 Planarization Material handling system A study of carrier motion on a dual-face CMP machine, 194 Integration of expert system with analytic hierarchy process for Plastic deformation the design of material handling equipment selection system, Tool life and wear mechanisms of TiN coated tools in an inter- 137 mittent cutting operation, 10 Material removal rate Polycrystalline diamond tools Investigation on the influence of machining parameters when Study on the aluminum alloy burnishing processing and the exis- machining tool steel using EDM, 84 tence of the outstripping phenomenon, 88 Mathematical model Power-steering worm blank Manufacturing models for the design and NC grinding of a revol- Erratum to ‘The process sequence design of a power-assisted ving tool with a circular arc generatrix, 114 steering part’ [J. Mater. Process. Technol. (2001) 87-92], Mechanical properties 310 Development of Ti-6AI-4V sheet with low temperature super- Preston equation plastic properties, 265 Local material removal mechanism considering curvature effect Metal forming in the polishing process of the small aspherical lens die, Analysis system. Prerequisite for automation in metal-forming 298 technology, 55 Pull system Micro end milling Effect of kanban size on just-in-time manufacturing systems, Micro milling of pure copper, 39 146 Micro machining PVD TIN coating Micro milling of pure copper, 39 Tool life and wear mechanisms of TiN coated tools in an inter- Micro tool mittent cutting operation, 10 Micro milling of pure copper, 39 Micro/macro adhesion and abrasion Regression Tool life and wear mechanisms of TiN coated tools in an inter- Prediction of the flow stress of 0.4C—1.9Cr—1.5Mn—1.0Ni—0.2Mo mittent cutting operation, 10 steel during hot deformation, 211 Subject Index of Volume 116 Reverse engineering Strip Free-form surface rebuild using an abductive neural network, 170 Formation and control of strip scale pores in hot rolling, 201 Revolving tool Strip element method Manufacturing models for the design and NC grinding of a revol- Third-power spline function strip element method and its simula- ving tool with a circular arc generatrix, 114 tion of the three-dimensional stresses and deformations of cold Rheological forming strip rolling, 235 Computer simulation of the rheological forming of an axisymme- Sub-surface damage trical part at room temperature, 91 Developments in applications of PCD tooling, 31 Roll-forming Superplastic bulging The effects of forming parameters in the roll-forming of a channel Numerical simulation of cavity damage evolution in superplastic section with an outer edge, 205 bulging process, 224 Rotary-table vertical-spindle surface grinding Superplasticity A study of the total thickness variation in the grinding of ultra- Development of Ti-6AI-4V sheet with low temperature super- precision substrates, 182 plastic properties, 265 Surface finish Scale pores Developments in applications of PCD tooling, 31 Formation and control of strip scale pores in hot rolling, 201 Beneficial effects of cryogenic cooling over dry and wet machining Scratch pattern on tool wear and surface finish in turning AISI 1060 steel, A study of carrier motion on a dual-face CMP machine, 194 44 Secondary shear zone thickness Aspects of surface and edge finish by magnetoabrasive particles, Performance evaluation of cemented carbide tools in turning AISI 77 1010 steel, 16 A note on the determination of optimal cutting conditions for Self-propagating high-temperature synthesis surface finish obtained in turning using design of experiments, Combustion synthesis of hexagonal boron-nitride-based ceramics, 305 161 Surface integrity Sensors Aspects of surface and edge finish by magnetoabrasive particles, Analysis system. Prerequisite for automation in metal-forming 77 technology, 55 Surface roughness Set-up model Performance evaluation of cemented carbide tools in turning AISI A set-up model for tandem cold rolling mills, 269 1010 steel, 16 Shape-memory effect Study on the aluminum alloy burnishing processing and the exis- Constitutive modeling of aluminum matrix NiTi fiber-reinforced tence of the outstripping phenomenon, 88 smart composite, 219 A study of carrier motion on a dual-face CMP machine, 194 Sheet formability A system for evaluating sheet formability using tensile tests with Taguchi techniques different shapes of specimens, 189 A note on the determination of optimal cutting conditions for Simulation surface finish obtained in turning using design of experiments, Effect of kanban size on just-in-time manufacturing systems, 305 146 Tensile tests A set-up model for tandem cold rolling mills, 269 A system for evaluating sheet formability using tensile tests with Simulation tests different shapes of specimens, 189 A system for evaluating sheet formability using tensile tests with Test method different shapes of specimens, 189 A system for evaluating sheet formability using tensile tests with Slipline field solutions different shapes of specimens, 189 A class of slipline field solutions for metal machining with Cou- TEUBA lomb friction at the chip—tool interface, 278 UBET and TEUBA: fast methods for forging simulation and pre- Smart composite form design, 62 Constitutive modeling of aluminum matrix NiTi fiber-reinforced Thermo-elastoplastic smart composite, 219 Thermal—mechanical model of warm powder compaction process, Spherical cam 67 Determination of spherical cam profiles by envelope theory, Third-power spline function 128 Third-power spline function strip element method and its simula- Springback tion of the three-dimensional stresses and deformations of cold The effect of a coating on the springback of integrated circuit strip rolling, 235 leadframes, 231 Three-dimensional analysis Squeeze casting Third-power spline function strip element method and its simula- A study on the qualities of GTA-welded squeeze-cast A356 alloy, tion of the three-dimensional stresses and deformations of cold 101 strip rolling, 235 Staggered-incremental-iterative Tilting Thermal—mechanical model of warm powder compaction process, Analysis system. Prerequisite for automation in metal-forming 67 technology, 55 Sticking and slipping zone Titanium alloy sheet A class of slipline field solutions for metal machining with Cou- Development of Ti-6AI-4V sheet with low temperature super- lomb friction at the chip—tool interface, 278 plastic properties, 265 Stress—strain relationship Tool life Constitutive modeling of aluminum matrix NiTi fiber-reinforced Micro milling of pure copper, 39 smart composite, 219 Performance of cutting fluids during face milling of steels, 244 322 Subject Index of Volume 116 Tool steel Turning steel Wear of coated and uncoated carbides in turning tool steel, Beneficial effects of cryogenic cooling over dry and wet machining 49 on tool wear and surface finish in turning AISI 1060 steel, 44 Tool wear Cutting performance and wear characteristics of PVD coated and UBET uncoated carbide tools in face milling Inconel 718 aerospace UBET and TEUBA: fast methods for forging simulation and pre- alloy, 2 form design, 62 Beneficial effects of cryogenic cooling over dry and wet machining Uniform distribution on tool wear and surface finish in turning AISI 1060 steel, 44 Settling of silicon carbide particles in cast metal matrix composites, Total thickness variation te A study of the total thickness variation in the grinding of ultra- Upper bound precision substrates, 182 UBET and TEUBA: fast methods for forging simulation and pre- Turning form design, 62 Performance evaluation of cemented carbide tools in turning AISI Upsetting 1010 steel, 16 Erratum to “The process sequence design of a power-assisted Wear of coated and uncoated carbides in turning tool steel, steering part” [J. Mater. Process. Technol. (2001) 87-92], 310 49 A note on the determination of optimal cutting conditions for Warm compaction surface finish obtained in turning using design of experiments, Thermal—mechanical model of warm powder compaction process, 305 67